Search

The enhancement of heat transfer between parallel surfaces, including parallel plates, parallel disks, and two concentric pipes, is vital because of their wide applications ranging from lubrication systems to water purification processes. Various techniques can be utilized to enhance heat transfer in such systems. Adding nanoparticles to the conventional working fluids is an effective solution that could remarkably enhance the heat transfer rate. No published review article focuses on the recent advances in nanofluid flow between parallel surfaces; therefore, the present paper aims to review the latest experimental and numerical studies on the flow and heat transfer of nanofluids (mixtures of nanoparticles and conventional working fluids) in such configurations. For the performance analysis of thermal systems composed of parallel surfaces and operating with nanofluids, it is necessary to know the physical phenomena and parameters that influence the flow and heat transfer characteristics in these systems. Significant results obtained from this review indicate that, in most cases, the heat transfer rate between parallel surfaces is enhanced with an increase in the Rayleigh number, the Reynolds number, the magnetic number, and Brownian motion. On the other hand, an increase in thermophoresis parameter, as well as flow parameters, including the Eckert number, buoyancy ratio, Hartmann number, and Lewis number, leads to heat transfer rate reduction. [Display omitted] • Nanofluid flow and heat transfer between parallel surfaces are studied. • Parallel plates, parallel disks, and concentric pipes are considered. • Physical phenomena and influential parameters are evaluated. [ABSTRACT FROM AUTHOR]

Irreversibility factors for the TiO2–water nanofluid flow are evaluated through entropy generation rates caused by friction and heat transfer by taking into account nanoparticle migration. Effects of three factors of viscosity gradient, non-uniform shear rate and Brownian diffusion are considered. The investigations are performed in both conventional channels and minichannels since the channel size has the considerable effects of on entropy generation. Influence of particle migration on the irreversibility factors is more noticeable in smaller channels such that with considering particle migration, the maximum thermal entropy generation rate increases about 51% for 0.2 mm channel, while this increment is almost 16% for 1 mm channel. Unlike results are obtained for conventional channels and minichannels, such that total entropy generation intensifies in minichannels and reduces in conventional channels by particle concentration increment. Friction is main factor in entropy generation for minichannels, while heat transfer demonstrates a higher contribution in conventional channels. The optimal channel size where minimum entropy generation occurs is obtained which is dependent on Reynolds number. Therefore, for lower Reynolds number, optimal case occurs at smaller channel size. Furthermore, diagrams of total entropy generation show minimum (optimal) point for 3 mm channel, while they demonstrate the constant trends for other channels. [ABSTRACT FROM AUTHOR]