Search

In recent years, jamming strategies for Synthetic Aperture Radar (SAR) pertaining to target detection and identification, such as the creation of false targets, electromagnetic (EM) deception, and signal spoofing, have been increasingly emphasized. Distinct from traditional SAR jamming approaches, the introduction of an innovative artificial material cloak in SAR target jamming presents augmented capabilities. These methods demonstrate a proficient redirection of incident EM waves in specific or arbitrary directions, effectively masking the vital information linked to critical targets. This study introduces a broadband SAR target jamming system employing an information metasurface that incorporates intelligent information processing algorithms in conjunction with a space-time-coding digital metasurface, endowing it with the capacity to adeptly modulate incident EM waves. This integration facilitates a versatile approach to jamming, enabling the deployment of multi-mode protective measures against critical targets. The conducted simulation and experiment results validate the system's ability to adjustably produce EM deception and generate multiple false targets independently of the SAR system. The outcomes of this research significantly advance the practicality of SAR protection strategies, pushing the boundaries toward more dynamic, broadband, and controllable scenarios, thereby substantially improving the concealment of critical targets in highly sensitive conflict areas. [ABSTRACT FROM AUTHOR]

In the bistatic synthetic aperture radar (BiSAR) system, the unavoidable frequency deviation between the oscillators (USOs) will result in additional phase modulation in the demodulated radar signal, which significantly degrades the quality of the SAR image and digital elevation model (DEM) product. The innovative L-band spaceborne BiSAR system LuTan-1 (LT-1) employs a non-interrupted synchronization scheme to acquire the synchronization phase error. This advanced phase synchronization scheme avoids interrupting the normal BiSAR data acquisition and further increases the synchronization frequency. However, some non-ideal factors in the transmission link like attenuation, multipath effect, interference, etc., may cause the synchronization phase to be polluted by noise. A phase denoising approach based on compressive sensing (CS) is proposed to improve the accuracy of synchronization phase. The imaging phase with high signal-to-noise ratio (SNR) is input into the K-SVD algorithm to learn the prior information, and then the noise of the synchronization compensation phase is eliminated by maximum a posteriori (MAP) estimation. The data acquired from the ground validation system of the LT-1 synchronization module are adopted for the validation experiment. The proposed phase denoising method achieves higher phase synchronization accuracy compared with traditional ones. The processing results verify the effectiveness of the proposed method and demonstrate its potential for future on-orbit applications of the LT-1 mission. [ABSTRACT FROM AUTHOR]

The bistatic synthetic aperture radar (BiSAR) plays an important role in remote sensing. However, the deviation between the two oscillators in BiSAR systems will cause a residual modulation of the echo signal. Therefore, the phase synchronization is an important issue that must be addressed in the BiSAR system. An advanced noninterrupted phase synchronization scheme is used for LuTan-1. The synchronization pulses are exchanged immediately after the ending time of the radar echo receiving window and before the starting time of the next pulse repetition interval, which will not interrupt the normal SAR operation. In order to evaluate the accuracy of the phase synchronization scheme, the model of phase synchronization is introduced at first. The hardware design and processing flow of LuTan-1 are introduced in detail. An innovative internal calibration strategy is also described. Then, the test data acquired by the ground validation system are analyzed to verify the effectiveness of the phase synchronization scheme. The signal-to-noise ratio (SNR) and the synchronization rate are the two most important factors to influence the accuracy in phase synchronization. The conclusions have guiding significance for the synchronization module design of LuTan-1 and the future BiSAR system. [ABSTRACT FROM AUTHOR]

Phase synchronization is one of the key issues that must be addressed for the bistatic synthetic aperture radar (BiSAR) system. LuTan-1 (LT-1) is an innovative spaceborne BiSAR mission based on the use of two radar satellites operating in the L-band to generate the global digital terrain models in the bistatic interferometry mode. An advanced synchronization scheme is used for the LT-1 system. The synchronization pulses are exchanged immediately after the ending time of the radar echo-receiving window and before the starting time of the next pulse-repetition interval. Therefore, it cannot interrupt the normal SAR data acquisition, further improving the synchronization accuracy and avoiding the data missing effect. In this letter, a robust phase-error estimation and compensation method is proposed to improve the accuracy of the synchronization by using the Kalman filter. The test data acquired from the ground validation system of the LT-1 synchronization module are used to demonstrate the feasibility of the proposed scheme. The results validate the effectiveness of the proposed scheme and prove the promise for its future application in LT-1. [ABSTRACT FROM AUTHOR]

In the scanning synthetic aperture radar (ScanSAR) mode, the radar antenna sweeps through different range subswaths to image a wide swath. The full-aperture imaging algorithm for ScanSAR data has been widely used because it can be realized by exploiting the existing standard high-precision Stripmap SAR processor and does not require stitch processing in the azimuth. However, both the focused image and the interferogram achieved by full-aperture processing suffer from spikes. The spikes adversely affect the ScanSAR-related applications, such as target detection and interferometry. To effectively suppress the spikes, an improved algorithm based on the missing-data iterative adaptive approach (MIAA) is proposed in this manuscript. Besides, the proposed method can also improve the azimuth resolution of ScanSAR images. Simulation and experimental results demonstrate that this algorithm has better performance when processing ScanSAR data compared with existing methods. [ABSTRACT FROM AUTHOR]

Digital beamforming (DBF) with Scan-On-Receive (SCORE) in elevation is a powerful technique for spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide-swath (HRWS) images. DBF in spaceborne SAR should be implemented in real-time to reduce the volume of the downloaded data. Current digital beamformers in SAR systems usually use phase shift instead of a time delay network to ensure real-time implementation. However, conventional phase shift DBF SAR with narrow array bandwidth is not applicable for broadband signals. The beam steering deviation as a function of frequency is obvious for signals with large fractional bandwidth, which appears as a phenomenon of frequency dispersion. If the signal bandwidth is wider than the array bandwidth, frequency dispersion can significantly deteriorate the signal-to-noise ratio (SNR) and must be well relieved. This article analyzes the frequency dispersion in DBF SAR and proposes an innovative DBF-SCORE scheme with specially designed scalloped beam. The proposed digital scalloped beamforming (DSBF) scheme is effective in relieving the influence of frequency dispersion in DBF SAR. Theoretical analysis and simulation results validate the effectiveness of the proposed scheme. The proposed DSBF scheme gives practical solution to the problem of frequency dispersion in broadband DBF SAR, which makes DBF-SCORE a more practical technique for future spaceborne HRWS SAR. [ABSTRACT FROM AUTHOR]

LuTan-1 (LT-1) refers to an innovative mission of spaceborne bistatic synthetic aperture radar (BiSAR) adopting the phase synchronization scheme of pulse exchange, which is scheduled to be launched in 2020. In this mission, the multipath effect caused by the reflection of satellites and Doppler frequency shift resulting from the relative motion between satellites constitute two critically latent factors deteriorating the performance of the phase synchronization scheme. This article details a loss factor to evaluate the fading of synchronization signals under the reflection of smooth and rough surfaces and estimates the influence of Doppler frequency shift on synchronization signals. Furthermore, the multipath channel impulse response is modeled, and the correlation characteristics of multipath channel are described by the coherent bandwidth and coherent time. In addition, two simulation experiments based on the system parameters of LT-1, are implemented to assess the influence of time-invariant and -varying multipath effects on the phase synchronization scheme. A scale experiment is also executed to quantify the influence of multipath effect on phase synchronization, and its result demonstrates that the phase synchronization scheme of LT-1 can not only achieve full coverage of space and backup capability of pulse exchange but also meet the application requirements under multipath effect. [ABSTRACT FROM AUTHOR]

LuTan-1 (LT-1), i.e., TwinSAR-L, mission is an innovative spaceborne bistatic synthetic aperture radar (SAR) mission that is based on two satellites operating at L-band with flexible formation flying, which is planned to launch in 2020. The primary objective of LT-1 is to generate a highly accurate global digital elevation model (DEM). Beyond that, LT-1 will serve for the demonstration of some state-of-the-art technologies in radar field and some applications, such as biomass inversion, disaster forecasting, and climate and environmental monitoring, and phase synchronization is a technical challenge in realizing the highly accurate topography and deformation measurements. The pulsed alternate synchronization scheme, which is proposed to solve the synchronization problem of TerraSAR-X add-on for Digital Elevation Measurements (TanDEM)-X, is an efficient and accurate method. However, it interrupts the normal work of the TanDEM-X, accordingly flowing a series of problems. For LT-1, a novel synchronization scheme, in which the phase synchronization signal is exchanged by virtue of a time slot between radar signals, is applied. Thus, the working efficiency and synchronization accuracy can further be improved. Furthermore, the performance prediction and phase synchronization experiment for this synchronization scheme is presented, which verifies the feasibility of the proposed scheme. Finally, in order to guarantee the transmission quality of the synchronization signal, the illumination combinations and gain variation of the synchronization antenna in an orbital period are detailed. [ABSTRACT FROM AUTHOR]

LuTan-1 [(LT-1), i.e., TwinSAR-L] mission is an innovative spaceborne bistatic synthetic-aperture radar (BiSAR) mission focusing mainly on differential interferometry, which will be launched in 2020. This article introduces some important aspects of the LT-1 mission for the first time, including the formation configuration, imaging mode, application scenarios, and the efficient baselines between the master satellite and the slave satellite. To realize the high accurate topography and deformation measurements, a wide swath BiSAR focusing algorithm with phase reserving ability should be developed. This article proposes a modified bistatic range-Doppler algorithm based on 2-D principle of stationary phase spectrum, which reduces the phase error introduced by the root term expansion and has an excellent focus performance and a good phase reserving ability. Finally, the spaceborne bistatic simulation experiments using orbital parameters and imaging mode of the LT-1 mission, including point targets and scene targets, are utilized to illustrate the validity and accuracy of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Generally, synthetic aperture radar (SAR) system transmits linear frequency modulation (LFM) signal to obtain the high-resolution image and weighted windowing is usually employed to suppress sidelobes. However, it will cause a 1–2-dB signal-to-noise ratio (SNR) loss. Nonlinear frequency modulation (NLFM) signal, which can construct the signal’s power spectral density (PSD) to reduce sidelobes without loss of SNR, is a promising candidate. However, the real-time generation of precise NLFM signal is still a technical challenge. In this letter, a high-precision NLFM signal generator with the ability of predistortion compensation is developed, and this signal generator will be employed in LuTan-1 (LT-1, i.e., TwinSAR-L) mission which is an innovative spaceborne bistatic SAR mission and planned to launch in 2020. In addition, a two-step error compensation method is developed to compensate the system error. Finally, the ground experiment is performed to validate the designed signal generator. [ABSTRACT FROM AUTHOR]

In the bistatic synthetic aperture radar (BiSAR) system, the deviation between two oscillators in different platforms will cause an additional modulation of BiSAR echoes. Therefore, phase synchronization is one of the key issues that must be addressed for the BiSAR system. The oscillator phase error model and the principle of phase synchronization are firstly described. The waveform diversity technology has been widely used in many fields, for example, the hearing aids device and the recognition of auditory input source in cocktail party problem. Inspired by this, an advanced phase synchronization scheme based on coherent integration and waveform diversity is proposed. The synchronization signal and radar signal are orthogonal signals which can be separated by using waveform diversity technique. After extracting the synchronization signal, the phase synchronization accuracy can be further improved by coherent integration. The transmission of synchronization signals between two synchronization antennas is analyzed, followed by the theoretical error analysis. Then, the processing of separating the echo signal and synchronization signal is described in detail. The simulation experiments are performed. The accuracy of phase synchronization can reach 1 degree, which verifies the effectiveness of the proposed synchronization scheme. [ABSTRACT FROM AUTHOR]

Phase synchronization is one of the key technical challenges and prerequisites for the bistatic synthetic aperture radar (SAR) system, which can form a single-pass interferometry system to perform topographic mapping. In this paper, an advanced phase synchronization scheme based on a pulsed signal at carrier frequency is proposed for a bistatic SAR system and it is verified by a ground validation system. In the proposed phase synchronization scheme, the pulsed signal at carrier frequency is used for phase synchronization link, and it is exchanged by virtue of a time slot between radar signals. The feasibility of the scheme is proven by theoretical analysis of various factors affecting the performance of phase synchronization, and the reliability of the scheme is verified by the test results of the ground validation system. [ABSTRACT FROM AUTHOR]

The deviation between the two oscillators in BiSAR systems will cause a residual modulation of echo signal. Therefore, the phase synchronization is an important issue that must be addressed for BiSAR systems. An advanced non-interrupted phase synchronization scheme is used for the LuTan-1 SAR satellite. The synchronization transceiver (STR) is designed for transmitting and receiving synchronization signals. In addition, STR mainly consists of master and auxiliary transceivers and switch module. Furthermore, the function and working principle of STR are introduced, and the detailed design of each part is described. The measured results are also evaluated to prove the performance of the STR. In addition, the phase synchronization accuracy is also demonstrated to verify the effectiveness of the non-interrupted synchronization scheme. The standard deviation (STD) of the residual phase is less than 0.3 degrees. The results have guiding significance for the synchronization unit design of LuTan-1 and the future BiSAR system. [ABSTRACT FROM AUTHOR]