Search

Carbon paper is commonly used for catalytic electrode preparation because of its high conductivity, corrosion resistance, and stability. However, traditional electrode preparation methods are inappropriate for highly hydrophobic carbon paper. In this paper, a high‐activity carbon paper catalytic electrode was prepared using multistrategies cold plasma modification to create atomic structural defects, dope N and Cu elements, and introduce oxygen‐containing functional groups. Analyses show that the bombardment of high‐energy particles caused atomic structural defects. Nitrogen and copper entered the carbon paper through plasma‐induced chemical recombination and physical adsorption, reaching 5.26% and 3.83%, respectively. Ethanol‐based plasma introduced oxygen‐containing functional groups to improve hydrophilicity. Finally, the plasma‐prepared electrode exhibited a reduction efficiency of 87.69% in an electrocatalytic nitrate reduction reaction. [ABSTRACT FROM AUTHOR]

Georgia Brady Barnhill's book, "Gems of Art on Paper: Illustrated American Fiction and Poetry, 1765–1885," provides a comprehensive and detailed account of the growth of illustrated American fiction and poetry. Barnhill explores the development of the illustration industry, from early experiments to technological advancements, and the evolution of illustrators and craftspeople. The book focuses on a neglected period of book illustration and offers a holistic view of mainstream literary illustration, discussing specific editions, illustration technologies, and important creators. Barnhill's work is a valuable resource for scholars and researchers interested in the history of book illustration in America. [Extracted from the article]

The solar photocatalytic degradation of pulp and paper mill wastewater has been reported by several scientists. However, this is the first time we are reporting for solar photocatalytic hydrogen production from pulp and paper mill wastewater and simultaneous degradation of pollutants. In this work, CuO based photocatalysts and novel square type photocatalytic reactor of 5 L capacity were used. The result shows that the prepared photocatalysts are solar active, efficient in hydrogen recovery and pollutant degradation from the pulp and paper wastewater. The effects of catalyst loading, sacrificial agent, pollutant removal efficiency and stability check were investigated. At 0.25 g/L of CuO/Fe 2 O 3 , 0.2 M of sacrificial agent (Na 2 SO 3 2−) and hydrogen yield of 1000 mL from 1000 mL of wastewater was achieved. The removal efficiency of TSS, TDS, BOD, COD, turbidity and TOC are around 70, 50, 60, 65, 70 and 45% respectively. Reusability study revealed that CuO/Fe 2 O 3 was chemically stable and could be reused successively (five cycles) without significant changes in its photoactivity and intrinsic properties. [Display omitted] • Visible light active CuO mixed with novel metal oxides were employed. • Hydrogen recovery from black liquor, paper mill wastewater were 1000 mL/h/L and 850 mL/h/L. • Efficiency of degradation of pulp & paper wastewater chemicals were around 50–70%. • AcHieved high recovery of hydrogen from pulp & paper wastewater. [ABSTRACT FROM AUTHOR]

In this paper, by a simple hydrothermal method vertically aligned ZnO nanorod arrays were grown on the carbon fiber paper (CFP) and then through a facile chemical bath deposition method CuO nanosheets were loaded on ZnO nanorod arrays, following by thermal spraying method, carboxylated carbon nanotubes (CCNTs) were successfully integrated with CuO/ZnO@CFP to form a binder-free CuO/ZnO-CCNT@CFP sensor. The sensor shows enhanced sensing activity for baicalein and luteolin determination due to the improved structural integration and synergism of different electrode material components. Remarkably, the CuO/ZnO-CCNT@CFP sensor showed good linear relationships over wide concentration ranges of 0.03–0.70 µM and 0.70–20 µM for baicalein and 0.03–0.45 µM and 0.45–8.5 µM for luteolin detection, with the detection limits of 1.7 nM for baicalein and 0.5 nM for luteolin, respectively. More importantly, the CuO/ZnO-CCNT@CFP sensor was utilized in the simultaneous determination of baicalein and luteolin, delivering linear ranges of 0.4–14 µM (baicalein) and 0.2–6 µM (luteolin) with the limit of detection of 0.05 µM and 0.03 µM, respectively. In addition, the developed CuO/ZnO-CCNT@CFP electrode was further investigated to detect baicalein and luteolin in traditional herbal medicine samples, showing satisfied results in comparison with analytic results from high performance liquid chromatography. [ABSTRACT FROM AUTHOR]

Due to the high wastepaper recyclability and water-loop system closure, packaging paper mills struggle with increased fines, causing runnability issues. Cellulase enzymes are a preferred treatment choice for the improvement of the pulp refining in stock preparation area but are not widely used or easy to introduce in the production process. Different cellulase enzymes were tested, and those with the highest activity were introduced to the white-water (WW) samples with the aim to reduce fines content as potentially new enzyme applications on the paper machine. The first portion of the study involved the development of an experiment model to find and confirm the optimal enzyme process parameters (40 °C, pH 5.7, reaction time 3 h, and 0.18%v/v enzyme addition) for laboratory made white-water. The second portion of the study included turbidity, colloidal charge, flow cytometry (FCM), and chemical oxygen demand (COD) analysis on industrial and laboratory made white-water samples at optimized process parameters. Obtained results corresponded to reduced fines content in white-water samples, which justified commercial usage of cellulase enzymes on recycled paper machine short loop and potentially increased machine runnability without negative influence on wastewater treatment plant. [ABSTRACT FROM AUTHOR]

Background: The mobile device diffusion has increasingly highlighted the opportunity to collect patient-reported outcomes (PROs) through electronic patient-reported outcomes measurements (ePROMs) during the clinical routine. Despite the ePROMs promises and advantages, the equivalence when a PRO measure is moved from the original paper-and-pencil to the electronic version is still little investigated. This study aims at evaluating equivalence between PROMs and ePROMs self-administration in people with multiple sclerosis (PwMS); in addition, preference of self-administration type was evaluated. Methods: The Manual Ability Measure-36 (MAM-36) and Fatigue Severity Scale (FSS) were selected for the equivalence test. The app ABOUTCOME was developed through a user-centered design approach to administer the questionnaires on tablet. Both paper-and-pencil and electronic versions were randomly self-administered. Intrarater reliability between both versions was evaluated through the intraclass correlation coefficient (ICC, excellent for values ≥ 0.75). Results: Fifty PwMS (35 females) participated to the study (mean age: 54.7±11.0 years, disease course: 27 relapsing-remitting and 23 progressive; mean EDSS: 4.7±1.9; mean disease duration: 13.3±9.5 years). No statistically significant differences were found for the means total scores of MAM-36 (p = 0.61) and FSS (p = 0.78). The ICC value for MAM-36 and FSS was excellent (0.98 and 0.94, respectively). Most of participants preferred the tablet version (84%). Conclusion: The results of the study provide evidence about the equivalence between the paper-and-pencil and electronic versions of PROs administration. In addition, PwMS prefer electronic methods rather than paper because the information can be provided more efficiently and accurately. The results could be easily extended to other MS PROs. [ABSTRACT FROM AUTHOR]

Enzymes derived from microbial sources have gained increasing popularity in industrial applications over the past decades. Despite the high production cost, alkaline proteases have wide applications in industries such as tanneries, food production, and detergents. In recent years, there has been a shift towards utilizing natural carbon sources for cultivating microorganisms and extracting proteases in order to reduce production costs. This study aimed to investigate the biochemical and kinetic properties of protease enzymes obtained from Aspergillus niger cultivated in a paper waste medium and compare with the enzyme produced in a basal medium. Glucose is a more favorable carbon source compared to cellulose, so paper waste was pretreated with cellulose-degrading bacteria to convert cellulose into smaller carbohydrates. After the growth of A. niger in basal and combinational media, the enzymatic properties were compared between the extracted enzymes by using casein as substrate. The results demonstrated that A. niger could produce protease enzymes in the paper waste medium similar to the basal medium with more than 5-fold cost saving. The specific activity of the enzymes isolated from the basal and paper waste media was calculated to be 184.95 ± 10.56 U ml−1 and 169.88 ± 11.05 U ml−1, respectively. Carbon sources did not affect the optimum pH and temperature of the protease enzyme, which were found to be 8 and 37 °C, respectively. This study provides valuable insights into the production of alkaline protease from A. niger using a combinational medium (paper waste pretreated by cellulose-degrading bacteria), offering a cost-effective approach for industrial applications. [ABSTRACT FROM AUTHOR]

During the early Cold War, it was difficult for American intelligence to penetrate the Iron Curtain but a potential solution soon arose: émigré intelligence groups such as the Magyar Harcosok Bajtársi Közössége (MHBK) or 'Association of Hungarian Veterans'. This group, however, turned out to be an intelligence 'paper mill'. Attempts at trans-Atlantic cooperation with the MHBK and similar groups failed as they lost most of their good sources and were penetrated by communist security services. By the mid-1950s, US intelligence cut these groups off, took over their good sources, and established a source registry to prevent recurrence of the problem. [ABSTRACT FROM AUTHOR]

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]

The growing demand for environmentally friendly and sustainable materials has led to the invention of innovative solutions aiming to reduce negative impacts on the environment. Mycelium-based green composites (MBCs) have become an alternative to traditional materials due to their biodegradability and various potential uses. Although MBCs are accepted as modern materials, there are concerns related to some of their physical and mechanical properties that might have limitations when they are used. This study investigates the effects of using paper waste to improve MBC properties. In this study, we investigated the physical and mechanical properties of MBCs produced from lignocellulosic materials (corn husk and sawdust) and mushroom mycelia of the genus Lentinus sajor-caju TBRC 6266, with varying amounts of paper waste added. Adding paper waste increases the density of MBCs. Incorporating 20% paper waste into corn husks led to the enhancement of the compression, bending, and impact strength of MBCs by over 20%. Additionally, it was also found that the MBCs produced from corn husk and 10% paper waste could help in reducing the amount of water absorbed into the material. Adding paper waste to sawdust did not improve MBC properties. At the same time, some properties of MBCs, such as low tensile strength and high shrinkage, might need to be further improved in the future to unlock their full potential, for which there are many interesting approaches. Moreover, the research findings presented in this publication provide a wealth of insightful information on the possibility of using paper waste to improve MBC performance and expand their suitability for a range of applications in sustainable packaging materials and various home decorative items. This innovative approach not only promotes the efficient utilization of lignocellulosic biomass but also contributes to the development of environmentally friendly and biodegradable alternatives to traditional materials. [ABSTRACT FROM AUTHOR]

Thiophene sulfide is difficult to be removed by hydrodesulfurization. In this study, ZnCl2-waste paper fiber activated carbon was used as adsorbent to remove thiophene sulfide from simulated oil by hydrothermal modification. Under the optimum condition of ammonia modification, the adsorption capacity of modified adsorbent to BT is 14.8 mg S/g, 2.98 times that of unmodified. BET, FTIR and Boehm analysis showed that the mesopore volume of ammonia modified adsorbent increased by 96.62% and the mesopore ratio increased from 12.58% to 43.40%, which was conducive to improving the adsorption rate. After modification, the basic groups on the surface of the adsorbent increased by 44.3 times, and –NH3+, –OH and –NH2 enhanced the electron attraction and hydrogen bonding force between the adsorbent and BT molecule. Adsorption isotherms, adsorption kinetics and adsorption thermodynamics show that the adsorption process is spontaneous, entropic and exothermic. The pseudo-second-order kinetic rate constant increases with the increase of adsorption temperature, indicating that the increase of temperature is beneficial to accelerate the adsorption rate. The adsorption desulfurization process follows the mechanism of single and multilayer adsorption mixing. The results of this study can help to reveal more clearly that biobased activated carbon can be modified to adsorb thiophene sulfide. Ammonia modified adsorbents enhance the adsorption capacity for benzothiophene [ABSTRACT FROM AUTHOR]

Purpose: To assess the extent of paper waste generated per year by instructions for use (IFUs) brochures included in intraocular lens (IOL) packaging in Europe and the U.S. Setting: Rothschild Foundation Hospital, Paris, France; Royal Free London NHS Foundation Trust; Center for Sight, London, United Kingdom. Design: Experimental study. Methods: A sample of IOLs were collected and each IFU was weighed. In addition, the cumulative weight of these brochures used in cataract surgeries performed annually in Europe and the U.S. was estimated, and the potential annual paper conservation that could be achieved if all manufacturers adopted electronic IFUs (e-IFUs) in Europe and the U.S. was determined. Results: The mean and standard deviation of the weight for overall IFUs, classic IFUs, and e-IFUs were 17.6 ± 13.8 g, 23.5 ± 13.2 g, and 2.9 ± 1.9 g, respectively. The estimated cumulative weight of paper generated from the IFUs accompanying implants used in European and U.S. cataract surgeries is 153 tons. If all manufacturers transition to e-IFUs, the cumulative weight saved would be 128 tons (-84%), equivalent to 120 tons of carbon dioxide equivalent and the preservation of more than 2000 trees annually. Conclusions: The classic IFUs in IOL packaging result in a significant amount of paper waste annually. Therefore, there is an urgent need for a rapid transition to e-IFU technology. The adoption of e-IFUs has already been authorized in Europe and the U.S., and it is crucial to expedite this process. [ABSTRACT FROM AUTHOR]

Throughout its serial run, Charles Dickens's Pickwick Papers (1836–7), was repurposed hundreds of times by the provincial press. From acting as innocuous filler material to making strategic political statements, provincial newspaper editors evoked, excerpted and adapted Pickwick as quickly as Dickens was penning the instalments, showing a keen responsiveness to political topicalities relevant to their reading communities. This article contends that these types of journalistic re-use benefit from being read collectively as a form of remediation, defined by Jay David Bolter and Richard Grusin as 'the formal logic by which new media refashion prior media forms'. It argues that these remediations are vital to understanding the politics of the provincial press because they became one method through which provincial newspapers articulated a localised response to the national political debates that raged following the 1832 Reform Act. As well as reflecting the political priorities of specific communities, these remediations nuance our understanding of Pickwick 's popularity by drawing attention to aspects of its construction that lent themselves to re-use. While explicit engagement with party politics is conspicuously absent from Pickwick , provincial editors capitalised upon this generality and imbued their re-workings of the serial with a partisanship that Dickens himself avoided, while using his name to substantiate and authorise their own pieces. In this respect, these remediations invite us to place Pickwick at the heart of political debate in the papers, by foregrounding the close relationship between newspaper politics, serial literature, and provincial identity in the 1830s. [ABSTRACT FROM AUTHOR]

Effects of cellulose nanofibers (CNF) and cationic starch (CS) were evaluated as coating components relative to the physical and mechanical properties of fluting papersheets fabricated from recycled corrugated cardboard fibers. Fabricated fluting papers were subjected to size press applications by three different coating blends. Coating suspensions were prepared at various concentrations of CNF (0.5%, 1%, 2%, 3%, and 4%) and 4 wt% CS, and the same amounts of CS/CNF. The paper sheets were fabricated using size press machine as three-time repetitive applications, followed by one-time drying section, and compared to uncoated, CScoated, and CNF-coated papers. The application of CNF suspensions increased tensile indices up to 11.7%. Moreover, CS/CNF suspensions resulted in a 67.2% increase in tensile index values. The coating of CS/CNF suspensions increased the burst index values by 163% at the CS+1%CNF concentration when compared to the control pulp. Surface application of prepared suspensions reduced the porosity of the samples under all conditions. The highest reduction in the air permeability was observed in the CS+4%CNF-coated samples as 91.5%. It can be concluded that the superficial applications of CNF on the physical and mechanical properties of recycled fluting paper was more effective in the presence of CS. [ABSTRACT FROM AUTHOR]

The widespread use of mobile devices and laptops has replaced traditional paper-based learning and the question of how the brain efficiency of digital tablet-based learning differs from that of paper-based learning remains unclear. The purpose of this study was to investigate the difference in brain efficiency for learning between paper-based and digital tablet-based learning by measuring activity in the prefrontal cortex (PFC) using functional near-infrared spectroscopy. Thirty-two subjects were randomly assigned to the paper-based learning or the digital tablet-based learning group. Subjects in each group performed a memory task that required memorizing a three-minute novel (encoding phase) on a paper or digital tablet, followed by a test in which they answered four multiple-choice questions based on the novel's content. To compare both groups, behavioral performance on the test (retrieval phase) and activity in the PFC were measured. As a result, no significant difference in behavioral performance between both groups was observed (p > 0.05). However, the paper-based learning group showed significantly lower activity in the PFC in the encoding phase than the digital tablet-based learning group (p < 0.05) but not in the retrieval phase. The current study demonstrated that brain efficiency in encoding is higher in subjects with paper-based learning than those with digital tablet-based learning. This finding has important implications for education, particularly in terms of the pros and cons of electronic document-based learning. [ABSTRACT FROM AUTHOR]

In this work, solid-surface fluorescence spectra of Rhodamine B (RhB) and fluorescein (FLU), two extensively used fluorophores, were studied and their concentrations were semi-quantitatively determined using the three-dimensional excitation–emission matrix (3D-EEM) data. In order to measure the solid fluorescence spectra, a trace amount of fluorophores was physically adsorbed on a piece of filter paper as a fluorescent paper, and the fluorescence spectra were recorded from the surface of the fluorescent paper instead of the inner parts of the solution. The spectral measurement was performed utilizing a routine spectrofluorimeter designed to measure the fluorescence of solution only by placing the fluorescent paper in a simple handmade holder at an adjusted incident angle of radiation. The results revealed a significant increase in the fluorescence intensity of the fluorescent paper strip compared to the solution phase. Moreover, in the RhB–FLU paper strip the forster resonance energy transfer was observed between FLU and RhB, similar to the observed phenomenon in the solution phase. For quantifying fluorophores, the EEM data were successfully resolved by applying multivariate partial least squares and parallel factor analysis (PARAFAC) modeling, and the results were compared with the univariate method. This study may provide a general guideline in further developing the solid fluorescence measurement of concentrated solutions or solid samples that have fluorescence measurement limitations such as high self-absorption and highly scattered spectra by using a conventional spectrofluorimeter, and also of biological samples where a trace amount of the analyte is available and high sensitivity is required. [ABSTRACT FROM AUTHOR]

In this study, Al paper and cellulose acetate (CA) filters derived from heated tobacco waste were successfully converted into current collectors and active materials for a supercapacitor device. Typically, heated tobacco contains electrically discontinuous Al paper. First, Al was extracted from the tobacco waste using HCl to produce Lewis acid (AlCl3). This acid was then used in an Al electrodeposition process utilizing the chloroaluminate ionic liquid reaction between the acid and the base (RCl) at room temperature. To enhance the conductivity, a supplementary coating of Al metal was applied to the Al paper through electrodeposition, thus re-establishing the electrical continuity of the discontinuous parts and forming an Al-coated current collector. Moreover, the CA filters were carbonized under a nitrogen atmosphere, yielding carbon precursors (C-CA) for the supercapacitor electrodes. To further enhance the electrochemical performance, nickel oxide (NiO) was incorporated into C-CA, resulting in C-CA@NiO with pseudocapacitance. The specific surface area of CA increased with carbonization and the subsequent incorporation of NiO. The as-synthesized C-CA and C-CA@NiO materials were applied to an Al-coated current collector to obtain C-CA- and C-CA@NiO-based electrodes, exhibiting stable electrochemical behavior in the voltage range of −1.0 to 0 V and 0 to 1.0 V, respectively. An asymmetric supercapacitor (ASC) device was assembled with C-CA@NiO and C-CA as the positive and negative electrodes, respectively. This ASC device demonstrated a high specific capacitance of 40.8 F g−1, while widening the operating voltage window to 2.0 V. The high electrochemical performance of the device is attributed to the successful Al electrodeposition, which facilitates the electrical conductivity and increased porosity of the C-CA@NiO and C-CA materials. To the best of our knowledge, this is a pioneering study in regards to the conversion of biomass waste into current collectors and active materials to fabricate a practical ASC device. Our findings highlight the potential of reusing Al paper and CA filters from heated tobacco waste as essential components of energy storage devices. [ABSTRACT FROM AUTHOR]

Complete utilization of different agricultural wastes is a great challenge before human society. The present study reports the valorization of rice straw for simultaneous production of reducing sugars and paper. The rice straw was first pre-extracted with water under different reaction conditions sequentially followed by papermaking. A maximum total reducing sugars (TRS) upto 12.38 % was extracted through aqueous pre-treatment. The pulped biomass was assessed for paper properties viz., tensile index, tear index, burst index, Kappa no. and brightness. For untreated rice straw tensile index, tear index and burst index were recorded within a range of 30.9–35.8 N m/g; 2.25–2.62 mN m2/g and 1.91–2.35 kN/g respectively where as it were ranged from 31.1 to 33.7 N m/g, 2.02–2.51 mN m2/g and 1.78–2.08 kN/g respectively for pretreated rice straw. Moreover, for untreated rice straw, kappa number and brightness were recorded in a range from 20.7 to 26.6 and 32.4 to 36.7 % ISO respectively, whereas for pre-treated rice straw it ranged from 19.1 to 26.3 and 31.6 to 35.5 % ISO respectively. High performance liquid chromatography (HPLC) analysis and field emission gun scanning electron microscopy (FESEM) were further employed during the study. In overall, extraction of underutilized sugars prior to pulping may prove as an efficient route for apt utilization of sugars followed by papermaking in near future. [ABSTRACT FROM AUTHOR]

Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]

The Proton Exchange Membrane Fuel Cell (PEMFC) performances are strongly impacted by the compression of the Gas Diffusion Layer (GDL). Despite its fibrous microstructure, this material is usually considered as a continuous medium and characterized with uniform loading. However, the GDL is subjected to a heterogeneous compression onto rib/channel patterns in the fuel cell assembly. In the present study, a complex behavior of the GDL response is experimentally revealed when the material is loaded with a rib/channel pattern, compared to uniform compression. The tests are simulated by finite element modeling using a classical strain-dependent elastic law, using parameters fitted from uniform compression experiments. It is shown that the numerical results do not reproduce the effect of pattern observed experimentally. Hypotheses to interpret these results involve mechanisms at the fiber microscale including fiber fracture, cross-link breakage and fiber rearrangement, which are exacerbated by larger material deformation caused by the heterogeneous loading. • Unexpected impact of rib/channel patterns on GDL compression. • Experimental investigation of the effect of rib/channel width on GDL deformation. • Numerical study with classical model unable to reproduce experimental results. • Interpretations based on mechanisms at the fiber microscale. [ABSTRACT FROM AUTHOR]

Carbon fiber paper (CFP) is one of the most widely used gas diffusion layer materials for proton exchange membrane fuel cells (PEMFC) due to its excellent properties such as high conductivity, high strength, high air permeability and corrosion resistance. In this study, CFP was prepared using the phenolic resin (PF) in-pulp addition method. The effect of PF content on the properties of hot-pressed paper (HPP) and CFP was investigated. The results showed that when the dosage of polyethylene oxide (PEO) was 1.5 wt%, the flocculation effect of PEO on PF was basically complete, and the water filterability and retention of carbon fiber pulp were relatively optimal. After HPP was carbonized into CFP, the hydrophobicity, average pore size, porosity, and air permeability increased, while the resistivity and tensile strength decreased. With the increase of PF content, the tensile strength of CFP gradually increased, while the average pore size, porosity, air permeability and resistivity decreased. When the PF content was 250 wt%, the average pore size of CFP was 36.5 μm, the water contact angle was 127°, the porosity was 69.7%, the air permeability was 7.81 × 103 mL mm/(cm2·h·mmHg), the resistivity was 21.1 mΩ cm, and the tensile strength was 15.7 MPa. In addition, the CFP prepared using PF in-pulp addition method had a relativity uniform pore size distribution and high air permeability. Therefore, this work shows that the CFP prepared using this technique exhibits excellent comprehensive performance, and enables the manufacturing of CFP to be more efficient, low-cost, and environmentally friendly. [Display omitted] • Carbon fiber paper was prepared efficiently using the phenolic resin in-pulp addition method. • Polyethylene oxide exhibits strong adsorption ability on phenolic resin in carbon fiber pulp. • The melting temperature of phenolic resin is a critical point in the preparation process of carbon fiber paper. • Carbon fiber paper possesses a relatively uniform pore size distribution and high air permeability. [ABSTRACT FROM AUTHOR]

Forensic document examination has been considered one of the most important fields in the forensic science. For this, a quick, effective, and cheap techniques for evaluation of forensic evidence is highly required. This study explores the comparison of A4 document paper by chemical and physical analysis. 16 of white A4 paper from different brands were analyzed by FTIR for investigation of structural characteristics. Video Spectral Comparator 8000 has been used to compare the A4 papers under different light source. The inorganic filler composition in the paper is also explored by ICP‐OES. The calcium carbonate content in document papers play a discriminant role which found to be between 16.02 % and 35.54 %. Also, water contact angle has been utilized in order to examine the surface of paper which is generally related to the inorganic filler and other additives. The WCA results ranged between 83° and 111° that enable quick and easy way to compare A4 document papers. The experimental results have demonstrated that besides FTIR methods, other methods such as ICP‐OES for elemental composition, WCA for wetting test, VSC for visualization under different light of source could have been applied for comparison of document papers in case of criminal cases. [ABSTRACT FROM AUTHOR]

Flexible graphene‐based paper electrodes (FGPEs) are a new class of study and the research on this electrode material has been carried out for approximately ten years. FGPEs have many advantages compared to classical solid electrodes such as being flexible, foldable, adaptable to flexible electronics, being cut, easily shaped, and effective and adjustable modification. In this work, the applicability of FGPEs modified with polyindole (PIN) thin films and zinc oxide nanoparticles (ZnO‐NPs) to energy‐storage systems as a supercapattery design is presented, and especially the limitations of ZnO‐NPs for energy‐storage applications are revealed to inform researchers working for a similar purpose. Capacitance calculations have been performed using both cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD) experiments. It was observed that the rGO/PIN paper demonstrated almost 30 times more energy‐storage capacity than that of the rGO/PIN/ZnO paper due to the electrochemical instability of ZnO‐NPs on the flexible electrode platform at the applied potential region in 1.0 M HClO4 solution. The rGO/PIN paper with a highly flexible property exhibited an energy density of 74.5 W h cm−2 and a power density of 2258 W cm−2 at a current density of 2.2 mA cm−2, revealing hopeful results for future modular and flexible approaches. [ABSTRACT FROM AUTHOR]

Flexible paper-based materials play a crucial role in the field of flexible electromagnetic shielding due to their thinness and controllable shape. In this study, we employed the wet paper forming technique to prepare carbon fiber paper with a thickness gradient. The electromagnetic shielding performance of the carbon fiber paper varies with the ladder-like thickness distribution. Specifically, an increase in thickness gradient leads to higher reflectance of the carbon fiber paper. Within the X-band frequency range (8.2–12.4 GHz), reflectivity decreases as electromagnetic wave frequency increases, indicating enhanced penetration of electromagnetic waves into the interior of the carbon fiber paper. This enhancement is attributed to an increased fiber content per unit area resulting from a greater thickness gradient, which further enhances reflection loss and promotes internal multiple reflections and scattering effects, leading to increased absorption loss. Notably, at a 5 mm thickness, our carbon fiber paper exhibits an impressive average overall shielding performance, reaching 63.46 dB. Moreover, it exhibits notable air permeability and mechanical properties, thereby assuming a pivotal role in the realm of flexible wearable devices in the foreseeable future. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g−1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10−4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide. [ABSTRACT FROM AUTHOR]

As power sources for Internet-of-Things sensors, thermoelectric generators must exhibit compactness, flexibility, and low manufacturing costs. Stretchable and flexible painted thermoelectric generators were fabricated on Japanese paper using inks with dispersed p- and n-type single-walled carbon nanotubes (SWCNTs). The p- and n-type SWCNT inks were dispersed using the anionic surfactant of sodium dodecylbenzene sulfonate and the cationic surfactant of dimethyldioctadecylammonium chloride, respectively. The bundle diameters of the p- and n-type SWCNT layers painted on Japanese paper differed significantly; however, the crystallinities of both types of layers were almost the same. The thermoelectric properties of both types of layers exhibited mostly the same values at 30 °C; however, the properties, particularly the electrical conductivity, of the n-type layer increased linearly, and of the p-type layer decreased as the temperature increased. The p- and n-type SWCNT inks were used to paint striped patterns on Japanese paper. By folding at the boundaries of the patterns, painted generators can shrink and expand, even on curved surfaces. The painted generator (length: 145 mm, height: 13 mm) exhibited an output voltage of 10.4 mV and a maximum power of 0.21 μW with a temperature difference of 64 K at 120 °C on the hot side. [ABSTRACT FROM AUTHOR]

Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]

Tetraethoxysilane (TEOS) is the most commonly used silicon-based reinforcement agent for conserving art relics due to its cost-effectiveness and commercial maturity. However, the resulting silica gel phase is prone to developing cracks as the gel shrinks during the sol–gel process, potentially causing severe damage to the objects being treated. In this study, dodecyltrimethoxysilane (DTMS) was introduced into TEOS to minimize this shrinkage by adding elastic long chains to weaken the capillary forces. The gel formed from the DTMS/TEOS hybrid material was transparent and crack-free, featuring a dense microstructure without mesopores or micropores. It exhibited excellent thermal stability, with a glass transition temperature of up to 109.64 °C. Evaluation experiments were conducted on artificially aged, handmade bamboo paper. The TEOS-based hybrid material effectively combined with the paper fibers through the sol–gel process, polymerizing into a network structure that enveloped the paper surface or penetrated between the fibers. The surface of the treated paper displayed excellent hydrophobic properties, with no significant changes in appearance, color, or air permeability. The mechanical properties of the treated bamboo paper improved significantly, with longitudinal and transverse tensile strengths increasing by up to 36.63% and 44.25%, respectively. These research findings demonstrate the promising potential for the application of DTMS/TEOS hybrid materials in reinforcing paper relics. [ABSTRACT FROM AUTHOR]

To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]

Three kinds of commercial ink-jet printing paper were taken as the research objects, which were represented by sample A, sample B and sample C respectively. Sample A and sample C were domestic products Abbott and Jiayi, and sample B was foreign product Gulou. The structure and composition of the three sample coatings were determined, and the surface properties of the three coatings were analyzed. This helps to understand the performance status of inkjet paper products on the market, and has guiding significance for the study of various factors affecting the performance of inkjet paper coatings. AFM and SEM were used to observe the surface morphology of the three samples. It was found that the coating pigment particles of sample A and sample B had good dispersion uniformity, and the coating pigment particles of sample C aggregated and the dispersion uniformity was poor. The results of cross-section SEM and EDS analysis show that only sample B coating has a double-layer structure, in which the bottom layer is aluminum-based pigment and silicon-based pigment, and the surface layer is only aluminum-based pigment. The coatings of sample A and sample C are single-layer aluminum-based materials. The properties of the coating surface of the three samples were analyzed. The results showed that the basic properties of the three samples met the product quality standards. Among them, the coating of sample B had the highest gloss (74.30%), hardness (3H) and water resistance. In terms of ink absorption, the ink absorption of sample B coating (64.7%) was higher than that of sample C (57.9%), slightly lower than that of sample A (69.2%). Sample B had the best comprehensive performance among the three samples. Finally, a double-layer coating process scheme for improving the performance of inkjet printing paper is proposed, which provides a direction for improving the performance of inkjet printing paper and has practical significance for the research of advanced inkjet printing paper. [ABSTRACT FROM AUTHOR]

Skin-based wearable devices have gained significant attention due to advancements in soft materials and thin-film technologies. Nevertheless, traditional wearable electronics often entail expensive and intricate manufacturing processes and rely on metal-based substrates that are susceptible to corrosion and lack flexibility. In response to these challenges, this paper has emerged with an alternative substrate for wearable electrodes due to its cost-effectiveness and scalability in manufacturing. Paper-based electrodes offer an attractive solution with their inherent properties of high breathability, flexibility, biocompatibility, and tunability. In this study, we introduce carbon nanotube-based paper composites (CPC) electrodes designed for the continuous detection of biopotential signals, such as electrooculography (EOG), electrocardiogram (ECG), and electroencephalogram (EEG). To prevent direct skin contact with carbon nanotubes, we apply various packaging materials, including polydimethylsiloxane (PDMS), Eco-flex, polyimide (PI), and polyurethane (PU). We conduct a comparative analysis of their signal-to-noise ratios in comparison to conventional gel electrodes. Our system demonstrates real-time biopotential monitoring for continuous health tracking, utilizing CPC in conjunction with a portable data acquisition system. The collected data are analyzed to provide accurate heart rates, respiratory rates, and heart rate variability metrics. Additionally, we explore the feasibility using CPC for sleep monitoring by collecting EEG signals. [ABSTRACT FROM AUTHOR]

Although membrane separation technology has been widely used in the treatment of oily wastewater, the complexity and high cost of the membrane preparation, as well as its poor stability, limit its further development. In this study, via the vacuum-assisted suction filtration method, polydopamine (PDA)-coated TiO2 nanoparticles were tightly attached and embedded on both sides of laboratory filter paper (FP). The resultant FP possessed the typical wettability of high hydrophilicity in the air with the water contact angle (WCA) of 28°, superoleophilicity with the oil contact angle (OCA) close to 0°, underwater superoleophobicity with the underwater OCA greater than 150°, and superhydrophobicity under the water with the underoil WCA over 150° for five kinds of organic solvents (carbon tetrachloride, toluene, n-hexane, n-octane, and iso-octane). The separation efficiency of immiscible oil/water, oil-in-water, and water-in-oil emulsions using the modified FP is higher than 99%. After 17 cycles of emulsion separation, a high separation efficiency of 99% was still maintained for the FP, along with good chemical and mechanical stability. In addition, successful separation and purification were also realized for the oil-in-water emulsion that contained the methylene blue (MB) dye, along with the complete degradation of MB in an aqueous solution under UV irradiation. [ABSTRACT FROM AUTHOR]

Waste wood, which has a large amount of cellulose fibers, should be transformed into useful materials for addressing environmental and resource problems. Thus, this study analyzed the application of waste wood as supercapacitor electrode material. First, cellulose fibers were extracted from waste wood and mixed with different contents of graphene nanoplatelets (GnPs) in water. Using a facile filtration method, cellulose papers with GnPs were prepared and converted into carbon papers through carbonization and then to porous activated carbon papers containing GnPs (ACP−GnP) through chemical activation processes. For the morphology of ACP−GnP, activated carbon fibers with abundant pores were formed. The increase in the amount of GnPs attached to the fiber surfaces decreased the number of pores. The Brunauer–Emmett–Teller surface areas and specific capacitance of the ACP−GnP electrodes decreased with an increase in the GnP content. However, the galvanostatic charge–discharge curves of ACPs with higher GnP contents gradually changed into triangular and linear shapes, which are associated with the capacitive performance. For example, ACP with 15 wt% GnP had a low mass transfer resistance and high charge delivery of ions, resulting in the specific capacitance value of 267 Fg−1 owing to micropore and mesopore formation during the activation of carbon paper. [ABSTRACT FROM AUTHOR]

This research explores the challenges and limitations faced at the basic level for the recycling of paper in an academic institute. It focuses on encouraging recycled paper use rather than bringing traditional virgin paper to prevent the rate of deforestation for reducing global warming. Data was collected from the academic institute via questionnaire and on-site observation and found that the institute was producing approximately 16 tons of wastepaper in a year. Besides that, another purpose of this research is to estimate the energy and assess the environmental effect by using the life cycle assessment as a tool. The results of this study revealed that traditional virgin paper derived from wood proves to be costly and less environmentally friendly than recycled paper. It also revealed that Traditional virgin paper has greater global warming, human toxicity, smog, acidification, and eutrophication potential than recycled paper. This study concludes that recycled paper does not only prove economically beneficent for any institution, but also beneficial for environment as well. [ABSTRACT FROM AUTHOR]

Two new isoindolin-1-ones (1 and 2), were isolated from the stems of Nicotiana tabacum (a cultivar of sun-cured tobacco with high resistance to black shank diseases, which originated from Huize local sun-cured tobacco by ethyl methanesulfonate mutagenesis). Their structures were elucidated using spectroscopic methods, including extensive 1D and 2D NMR techniques. Interestingly, both compounds showed high antibacterial activity with bacteriostatic diameter within the range 18.2 ± 1.4–25.8 ± 2.2 mm against five pathogenic strains, and they have the potential values for use as an antiseptic agent for Heat Not Burning cigarette-tipping paper. [ABSTRACT FROM AUTHOR]

The International Paper Conservation Seminar has now been held as four face-to-face events and four online events. It is a three-day international event delivered in Spanish and Portugese with keynote talks from national and international conservation professionals from Mexico to Chile presenting projects covering works on paper in diverse formats including documents, photographs historic books, and artworks. Countries such as Argentina, Chile, Bolivia, Peru, Ecuador, Mexico, Paraguay, Uruguay, Colombia, Brazil, Spain and Costa Rica have sent delegates to discuss both the social and cultural aspects of conservation work. The seminar is a completely free event for its attendees. It is intended to be suitable for all, with high-level talks addressing issues of management, preservation, conservation, restoration and disaster recovery among many others. From the third event onwards, training workshops for basic treatments have been developed, with the participation of recognized conservation professionals from universities and international institutes, allowing the number of attendees to remain constant since the Covid-19 pandemic. It creates networks and fosters collaboration for professional and institutional projects. The seminars have generated a connected and active community of paper conservators in the region, aware of our limitations, and capable of solving problems collaboratively and according to local resources. [ABSTRACT FROM AUTHOR]

Utilizing the iron-carbon microelectrolysis technology to carry out in-depth treatment of waste paper and pulp wastewater, the optimal process parameters were determined based on single factor experiments. In addition, the response surface methodology was employed to optimize the process parameters by analyzing the experimental results. Under the optimized conditions, the excita1tion-emission-matrix spectra and GC-MS were used to analyze the water quality of the treated wastewater. The results showed that the optimal treatment conditions of iron-carbon microelectroly1sis process were initial pH=3.0, filler addition amount 255g L-1, reaction time 120 min, aeration amount 0.9 L min-1, and the COD removal efficiency was 32. 14% under these conditions; the maximum predicted value of COD removal rate calculated under the optimal process conditions was 34.57% from the response surface analysis, which was basically consistent with the experimental results. The results of excitation-emission-matrix spectra analysis showed that the iron-carbon micro1electrolysis process was effective in degrading humic acid and fulvic acid in waste paper and paper wastewater, and GC-MS analysis showed that the relative content of eicosanoids in wastewater was reduced from 43.31% to 4.79% of the original water after the iron-carbon microelectrolysis treat1ment, but a small amount of new pollutants were generated at the same time. [ABSTRACT FROM AUTHOR]

In this research, I established an energy benchmark for the pulp and paper industry of Vietnam. I, therefore, focus on three major paper product families, including packaging paper, printing and writing paper, and tissue paper. In this research, I use specific energy consumption (SEC) as the energy performance indicator (EnPI) for computing energy benchmarks for the main sub-sectors in the pulp and paper industry of Vietnam. The factories in the pulp and paper industry of Vietnam are divided into three production scales, and the energy benchmarks are specified by production scales. Energy surveys and energy audits have been used to calculate energy benchmarks. Here, I establish the energy benchmark for the main sub-sectors in the pulp and paper industry of Vietnam according to the three production scales. I also estimate the energy saving potential for the pulp and paper industry of Vietnam based on surveying and auditing results. [ABSTRACT FROM AUTHOR]

Objective: To determine the accuracy of high‐risk human papillomavirus (HPV) DNA samples on filter paper in comparison to specimen transport medium (STM). Methods: This was a cross‐sectional diagnostic study of 42 consecutive women who were prospectively recruited. Each had self‐collected vaginal samples on filter paper, physician‐collected cervical samples on filter paper, and physician‐collected cervical samples in STM. HPV DNA testing was performed with a Hybrid Capture 2 system (Qiagen). Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and agreement of filter paper methods with the standard procedure were calculated. Results: The overall prevalence of HPV in STM was 67.5%. Detection of HPV DNA in the physician‐collected cervical samples on filter paper had a sensitivity of 77.8%, a specificity of 100%, a PPV of 100%, and an NPV of 68.4%. The patient's self‐sampling on filter paper had a sensitivity of 66.7%, a specificity of 100%, a PPV of 100%, and an NPV of 59.1%. The agreement between STM method and physician‐collected sample on filter paper was substantial, (κ = 0.695, P < 0.001), while the agreement between STM and self‐collected samples on filter paper was moderate (κ = 0.565, P < 0.001). Most patients reported that self‐collection was acceptable (100%), painless (95%), and not embarrassing (95%). Conclusion: Filter paper, with dried self‐collected vaginal samples, can be used to detect high‐risk HPV with acceptable accuracy. Synopsis: Self‐collected vaginal samples on filter paper, to detect high‐risk human papillomavirus, is better for women, easier to transport to central laboratories, and has acceptable accuracy. [ABSTRACT FROM AUTHOR]

This study attempts to detect papers originating from the Russia‐based paper mill 'International Publisher' LLC. A total of 1,063 offers to purchase co‐authorship on a fraudulent papers published from 2019 to mid‐2022 on the 123mi.ru website were analysed. This study identifies at least 451 papers that are potentially linked to the paper mill, including one preprint, a duplication paper and 16 republications of papers erroneously published in hijacked journals. Evidence of suspicious provenance from the paper mill is provided: matches in title, number of co‐authorship slots, year of publication, country of the journal, country of a co‐authors and similarities of abstracts. These problematic papers are co‐authored by scholars from at least 39 countries and are submitted to both predatory and reputable journals. This study also demonstrates collaboration anomalies in questionable papers and examines indicators of the Russia‐based paper mill. The value of co‐authorship slots offered by 'International Publisher' LLC from 2019 to 2021 is estimated at $6.5 million. Since this study only analysed a single paper mill, it is likely that the number of papers with forged authorship is much higher. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to determine the ink removal efficiency of papers with different recycling numbers and to examine some electrophotographic printing properties. Design/methodology/approach: The base papers prepared according to the INGEDE 11p standard are subjected to six recycling stages (RS) under equal conditions. The physical-optical properties of the papers obtained at the end of each RS are measured and CMYK (cyan, magenta, yellow, key) color measurement scales are printed on each paper with electrophotographic printing. Color measurements of the printed papers are measured using the X-Rite eXact spectrophotometer, adhering to the ISO 13655:2017 standard. According to the measurement results of the optical properties, the ink removal efficiency of each recycling step is determined as a percentage (%) using some formulas. Findings: As general, according to DEMLab and IERIC data, it is determined that the ink removal efficiency increased as the recycling repetition increased. In DEMf factor values, the highest deinking efficiency is obtained after the fourth RS. There is no significant difference between the printing properties of the samples. Originality/value: It has been a matter of curiosity that papers lose their properties after how many RS. Many studies have been carried out on this subject and it has been presented by experimental methods that the printability properties of papers increase or decrease after which RS. This study can be a pioneer for future studies. [ABSTRACT FROM AUTHOR]

The acidic soils of western Newfoundland require liming for successful production of most crops. Locally sourced paper mill waste wood ash (WA) and paper sludge (SL) have potential as cheaper alternatives to limestone (LIME). Two greenhouse experiments evaluated WA and SL as liming and soil conditioning amendments for annual ryegrass (Lolium multiflorum) production. At 55 days after seeding, soil pH in WA (6.2 and 6.3) and wood ash and paper sludge (WASL) (6.0 and 6.3) were not different from that in LIME (6.0 and 6.5) for Experiments 1 and 2, respectively. However, pH in SL was 0.4 and 0.3 points lower than in LIME. Compared to LIME, WA, SL, and WASL produced 31%–52% and 57%–74% greater biomass yield in Experiments 1 and 2, respectively. N uptake was greater in WA (60 and 129 kg N ha−1) and WASL (51 and 97 kg N ha−1) compared to LIME (40 and 85 kg N ha−1), in Experiments 1 and 2, respectively. SL did not differ from LIME in Experiment 1, but reduced N uptake by 57% in Experiment 2. The results show significant potential of WA as an alternative amendment for liming and yield improvement of annual ryegrass grown in NL podzolic soils. However, SL has limited potential due to the risk of increasing N immobilization and residual soil mineral N when growing conditions are limiting. Combining SL with WA or biochar seemed to alleviate these risks. Overall, the adoption of these amendments for field production systems warrants serious consideration, following supplemental field studies to determine optimal application rates and timing. Core Ideas: The podzolic soils of Newfoundland have low pH and fertility, hence require liming.Locally sourced wastes, such as paper mill wood ash (WA) and sludge (SL), could be used as liming and nutrient sources.WA was equivalent to limestone (LIME) in improving and sustaining optimal soil pH.WA produced 52% and 74% greater annual ryegrass yield than conventional LIME application in podzolic soils. [ABSTRACT FROM AUTHOR]

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

Phosphorylated fibers offer a broad range of applications, particularly in thermal insulation, notably with wood fibers, provided they exhibit improved mechanical characteristics. Despite encountering challenges in applying traditional papermaking methods, the creation of paper or board sheets with phosphorylated pulp fibers remains a challenge. Findings suggest that phosphorylation-modified fibers show increased roughness. Moreover, in comparison with unbeaten kraft sheets (KF) and thermomechanical pulp sheets (TMP), those made from phosphorylated kraft fibers (PKF), using a cationic coagulant and a flocculant, demonstrate significant enhancements in burst index, break index, and tensile energy absorption by 2.12 times, 1.7 times, and 2.77 times, respectively. Similarly, phosphorylated TMP sheets, prepared with a dual polymeric system (coagulant/flocculant), exhibit improvements of 1.42 times, 1.33 times, and 1.82 times, respectively, in these properties. The study emphasizes the ameliorating effect of cationic polymeric agents on the charge impact of phosphorylated fibers on overall sheet quality, while also highlighting the substantial influence of hot-pressing lignin-containing paper on all determined physical properties. [ABSTRACT FROM AUTHOR]

• The PBAT/PLA coated paper shows high methane yield under AD condition. • Plastic film residues remain after the digestion of PBAT/PLA coated paper. • The decrease of hydrophobicity for PBAT/PLA bags is due to the formation of PLA monomers. • The bacterial community shows difference between PBAT/PLA coated paper and bags. • Methanoculleus is enriched on the plastic surface under mesophilic AD. Poly (lactic acid) (PLA) and Poly(butylene adipate-co-terephthalate) (PBAT) are two of biodegradable plastics with the highest production capacities in 2021. Bioplastic waste management can be easily integrated with organic waste management, especially when bioplastics are used as food packaging material, since they are potentially biodegradable. The aim of this study was to assess the biodegradability of biodegradable polymer-coated paper (BPCP) and bioplastic bags made from PBAT/PLA blend during mesophilic and thermophilic anaerobic digestion (AD) and to reveal the changes in the physicochemical properties of the bioplastics. BPCP obtained 155 NmL-CH 4 /g VS and 307.3 NmL-CH 4 /g VS under mesophilic and thermophilic conditions, respectively, but left bioplastic film residues. The bioplastic bags did not exhibit significant biodegradation during the AD processes. 1H NMR results indicated that the ratio of PLA to PBAT decreased significantly after AD of the BPCP film and that PLA monomers were formed from the bioplastic bags, leading to a decrease in the hydrophobicity on the surfaces of the materials. Methanoculleus was found to be enriched on the bioplastic surface after mesophilic AD. From the perspective of coupling bioplastic waste management with the food waste management, the incorporation of BPCP into the AD reactor not only enhances system stability and methane production to a greater extent than biodegradable plastic bags but also raises concerns regarding the residual biofilm when utilizing the digestate for direct land applications. [ABSTRACT FROM AUTHOR]

The pulp and paper industry stands out as an example of a technology based on a renewable resource, cellulose. The sludge, however, poses major environmental and public health problems. To effectively manage the sludge wastes, it is critical to fully evaluate its composition, possible environmental impacts, and the total amount of exploitable renewable resources. The study established the pH of the sludge to be 7.32 ± 0.98, an electrical conductivity (1.84 mS/cm), nitrogen concentration (2.65 ± 0.21%), and total organic matter (41.23 ± 3.11%). The cellulosic content was established to be 74.07 ± 2.71% which contributes to 53.07 ± 1.23% water holding capacity (WHC). The most abundant elements were C and O, followed by Cl, Si, Al, and Mg, with lower concentrations of S, Si, K, and iron. The polycyclic aromatic compounds (PAHs) levels ranged from 0.29 to 322.56 ng.g-1 with 1-methyl pyrene posting the highest concentration (322.56 ng.g-1. XRD peaks at 17.10°, 23.86°, 30.14°, and 36.57°, which imply the existence of CaCO3. SEM indicated that the sludge was majorly comprised of fibers materials with average particle sizes of 280 micrometers. TGA/DTG analysis showed that the sludge had the greatest cellulose and hemicellulose (64.7 wt. %). [ABSTRACT FROM AUTHOR]

A comparative study of the supramolecular structure, physicochemical properties, and morphology of the powder celluloses (PCs) obtained from the waste paper of newsprint and cardboard, plant celluloses, and nonconventional raw materials was conducted using the methods of FT-IR spectroscopy, high-resolution solid-state 13C NMR spectroscopy, wide-angle X-ray scattering, and scanning electron microscopy (SEM). According to the FT-IR and 13C NMR spectroscopy results, the functional composition of the PCs is similar to that of the wood PCs and matches highly purified cellulose samples. The crystallographic structure of the powder samples corresponds to the structure of cellulose I. The crystallinity and the transverse dimensions of the crystallites are 39.4 and 40.2%, and 45 Å [110] and 54 Å [110], for the PCs from newsprint paper and cardboard, respectively. These values considerably exceed those for the initial waste paper samples. A comparative analysis of the SEM results showed a significant similarity among the PC fibers of different origin. The results of the study of the physicochemical properties of the PCs isolated from the waste paper allow predicting their competitive application in comparison with plant PCs. [ABSTRACT FROM AUTHOR]

Traditionally, cellulose nanofiber (CNF) production has primarily relied on virgin cellulose sources. Yet, the shift to using paper mill sludge (PMS) as a source for CNF underscores the significance of reusing and recycling industrial byproducts. PMS contains significant amounts of cellulose that can be extracted as a raw material. The purpose of present study is to provide a sustainable approach to PMS utilization as a paper coating additive in the cellulose nanofibrils (CNFPMS) form via simply scalable wire-wound rod coating method. The effect of CNFPMS additive amounts at two coating layers on microstructure and surface properties of coatings such as porosity, air permeability surface roughness and optical properties such as brightness, gloss and CIE L*a*b* is studied, which they can also provide insight for the eventual print performance. Results indicated that the obtained CNFPMS in paper coating shows 52% decrease in porosity, presenting significant improvement in the coating microstructure. The marginal increase in permeability coefficient and surface roughness, 54% and 10%, respectively, suggests improving color reproduction and preventing color density losses. Optical analysis showed slight decrease in brightness and gloss, as was expected. Notably, the lightness was improved, which also indicates increasing color gamut volume in printing applications. As a result, the current work offers a sustainable approach to manage PMS for use in paper coatings as a high-value-added material. [ABSTRACT FROM AUTHOR]

Tetra Pak® paper and PE (polyethylene) wastes were evaluated to obtain a new composite material with awareness of environmental responsibility. Fillers and coupling agents were used for this joining process. Calcite (CaCO3), boric acid (H3BO3), SPT (Sodium Perborate Tetrahydrate / NaBO3.4H2O), titanate, MAPE (maleic anhydride grafted polyethylene, and vinyltriethoxysilane (C8H18O) composites were produced in 30 x 30 cm plates. A total of 30 samples were prepared as 5 mg flour for thermogravimetric analysis (TGA). Samples were observed in a thermal analyzer at 10, 15, or 20 °C/min heating rate in nitrogen atmosphere. Graphs were obtained as a result of TGA, and the activation energies were calculated using these graphs. The activation energy was calculated using the Flynn-Wall-Ozawa method. The determined activation energies of the composites were close to each other for each temperature group. In the samples using calcite and vinyltriethoxysilane, relatively higher activation energies were observed in comparison to the samples with boric acid and MAPE. [ABSTRACT FROM AUTHOR]