Search

This work is the continuation and refinement of already published communications based on PET/EG nanocomposites prepared by in situ polymerization1, 2. In this study, nanocomposites based on poly(ethylene terephthalate) with expanded graphite were compared to those with functionalized graphite sheets (GO). The results suggest that the degree of dispersion of nanoparticles in the PET matrix has important effect on the structure and physical properties of the nanocomposites. The existence of graphene sheets nanoparticles enhances the crystallization rate of PET. It has been confirmed that in situ polymerization is the effective method for preparation nanocomposites which can avoid the agglomeration of nanoparticles in polymer matrices and improve the interfacial interaction between nanofiller and polymer matrix. The obtained results have shown also that due to the presence of functional groups on GO surface the interactions with PET matrix can be stronger than in the case of exfoliated graphene (EG) and matrix.

Development of new types of antimicrobial coatings is of utmost importance due to increasing problems with pathogen transmission from various infectious surfaces to human beings. In this study, new types of highly potent antimicrobial polyurethane composite films encapsulated by hydrophobic riboflavin-based carbon polymer dots are presented. Detailed structural, optical, antimicrobial, and cytotoxic investigations of these composites were conducted. Low-power blue light triggered the composites to eradicate Escherichia coli in 30 min, whereas the same effect toward Staphylococcus aureus was reached after 60 min. These composites also show low toxicity against MRC-5 cells. In this way, RF-CPD composites can be used for sterilization of highly touched objects in the healthcare industry. [ABSTRACT FROM AUTHOR]

This publication summarises the current state of knowledge and technology on the possibilities and limitations of using mineral and synthetic fillers in the field of 3D printing of thermoplastics. FDM technology can be perceived as a miniaturised variation of conventional extrusion processing (a microextrusion process). However, scaling the process down has an undoubtful drawback of significantly reducing the extrudate diameter (often by a factor of ≈20–30). Therefore, the results produced under conventional extrusion processing cannot be simply translated to processes run with the application of FDM technology. With that in mind, discussing the latest findings in composite materials preparation and application in FDM 3D printing was necessary. [ABSTRACT FROM AUTHOR]

Due to their unique structural properties bacterial cellulose (BC) hydrogels find possible usage in many fields such as cosmetology, food industry, or medicine. In this study, photoactive BC hydrogels are investigated through modifications of their structural, mechanical, and pro‐oxidant properties resulting from graphene quantum dots (GQDs) encapsulation. Detailed structural analysis is conducted by atomic force microscopy, transmission electron microscopy and scanning electron microscopy, X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X‐ray diffraction method. Dynamic mechanical analysis is performed to study the changes in storage modulus, loss modulus and tan δ. Pro‐oxidative properties of new designed composites are tested by electron paramagnetic resonance (EPR). Structural and mechanical analyses show successful encapsulation of GQDs into BC whereas EPR measurements indicate high potential of these composites for singlet oxygen production. [ABSTRACT FROM AUTHOR]

High-density polyethylene (HDPE)-based hybrid nanocomposites containing graphene nanoplatelets (GnPs) and multiwall carbon nanotubes (MWCNTs) were fabricated using melt mixing followed by compression molding. The influences of size and weight ratio of both carbon-based nanofillers on the electrical, thermal, and mechanical properties of hybrid nanocomposites were evaluated. This study proves that the size and weight ratio of carbon-based nanofillers play a critical role in determining these properties. The optimum size and weight ratio of GnPs and MWCNTs are determined at the maximum achieved enhancement for each property. The HDPE-based nanocomposites containing GnPs with larger surface area and MWCNTs with higher aspect ratio display the highest electrical conductivity at GnPs/MWCNTs weight ratio of 2/3. The combination of GnPs with larger surface area and MWCNTs with lower aspect ratio provides the maximum Young's modulus enhancement of hybrid nanocomposites at 1/4 weight ratio of GnPs and MWCNTs. The nanocomposite containing GnPs with the largest lateral size and MWCNTs with a higher aspect ratio at a 3/2 weight ratio exhibits the highest thermal conductivity. Also, at around the percolation threshold of GnPs, the incorporation of MWCNTs with larger aspect ratio into the HDPE-based nanocomposites containing GnPs with the largest lateral size shows a distinct synergic effect on the thermal conductivity and Young's modulus, while an additive effect on the electrical conductivity and thermal stability. [ABSTRACT FROM AUTHOR]

• New type of photoactive antibacterial surface. • Simple route to fabricate hCQDs/PDMS nanocomposites. • hCQDs/PDMS nanocomposites eradicate bacteria under blue light efficiently. Despite great efforts, the design of antibacterial surfaces is still a challenge. In this work, results of structural, mechanical, cytotoxic and antibacterial activities of hydrophobic carbon quantum dots/polydimethylsiloxane surfaces are presented. Antibacterial action of this surface is based on the generation of reactive oxygen species which cause bacteria damage by oxidative stress. At the same time, this surface was not cytotoxic towards the NIH/3T3 cells. Swelling-encapsulation-shrink method is applied for encapsulation of hydrophobic carbon quantum dots in medical grade silicone-polydimethylsiloxane. XPS and photoluminescence spectroscopy analyses confirm that hydrophobic carbon quantum dots have been encapsulated successfully into polydimethylsiloxane polymer matrix. Based on stress-strain test the improvement of mechanical properties of these nanocomposites is established. It is shown by electron paramagnetic resonance spectroscopy and luminescence method that nanocomposite generates singlet oxygen initiated by 470 nm blue light irradiation. Antibacterial testing shows the nanocomposite in the form of foil kills Staphylococcus aureus, Escherichia coli and Klebsiella pneumoniae and is very effective after only a 15 min irradiation. [ABSTRACT FROM AUTHOR]

In this paper, diffuse coplanar surface barrier discharge plasma at atmospheric pressure has been used for surface modification of polyester/cotton (PESc) fabric, which was subsequently modified by sol–gel process using suitable organofunctional silanes to enhance its hydrophobicity. Modified PESc fabric surfaces were conditioned during the gelling process to obtain the permanent hydrophobicity. The contact angle of water before washing of plasma and sol–gel pretreated PESc fabric was found to be 154° and 151° after standardized washings. It was also demonstrated that the process is applicable at the industrial scale. [ABSTRACT FROM AUTHOR]

Various types of bacteria inhabit many surfaces thus causing problems which can have very strong impact on human health. Here we present a study of photophysical, mechanical, and antibacterial properties of curcumin/polyurethane nanocomposites prepared by swell‐encapsulation‐shrink method. The prepared nanocomposites have been characterized for degree of swelling, surface morphology, mechanical properties, chemical contents, photoluminescence, hydrophobicity, potentials for singlet oxygen generation, and antibacterial activity. Dynamic mechanical analysis has shown slight changes of glass temperature of curcumin/polyurethane nanocomposites due to blue light irradiation. It was found that nanocomposites have very strong photoluminescence, become photoactive upon blue light irradiation at 470 nm and generate singlet oxygen. Conducted antibacterial tests have shown very strong activity of these nanocomposites especially toward Escherichia coli. These bacteria strains have been eliminated completely only after 1 h irradiation by blue light. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47283. [ABSTRACT FROM AUTHOR]

Development of new types of antibacterial coatings or nanocomposites is of great importance due to widespread multidrug-resistant infections including bacterial infections. Herein, we investigated biocompatibility as well as structural, photocatalytic, and antibacterial properties of photoactive hydrophobic carbon quantum dots/polyurethane nanocomposite. The swell-encapsulation-shrink method was applied for production of these nanocomposites. Hydrophobic carbon quantum dots/polyurethane nanocomposites were found to be highly effective generator of singlet oxygen upon irradiation by low-power blue light. Analysis of conducted antibacterial tests on Staphyloccocus aureus and Escherichia coli showed 5-log bactericidal effect of these nanocomposites within 60 min of irradiation. Very powerful degradation of dye (rose bengal) was observed within 180 min of blue light irradiation of the nanocomposites. Biocompatibility studies revealed that nanocomposites were not cytotoxic against mouse embryonic fibroblast cell line, whereas they showed moderate cytotoxicity toward adenocarcinomic human epithelial cell line. Minor hemolytic effect of these nanocomposites toward red blood cells was revealed.