Search

Nanocrystalline powders of 4 mol.% GdO1.5-4 mol.% SmO1.5 doped ZrO2 (4Gd4SmSZ) has been synthesized by co-precipitation process. Their phase transformation and crystalline growth behavior was investigated by Thermo gravimetric-Differential Thermal Analysis (TG-DTA), X-ray Diffraction (XRD), Raman spectroscopy and High-Resolution Transmission Electron Microscopy (HR-TEM) after calcinations at different temperatures. The XRD, Raman spectra and HRTEM results confirm the nature of tetragonal zirconia (t-ZrO2). The prepared 4Gd4SmSZ powders, remains in the single metastable tetragonal phase over the whole calcination temperature ranging from 873 K to 1273 K for 2 h. The crystallite size varies from 11.98 nm to 18.90 nm with increase of temperature from 873 K to 1273 K. The activation energy of the prepared powders at low temperature is considerably lesser than that at a higher temperature. The annealed 4Gd4SmSZ powders had shown excellent phase stability at 1573 K for 100 h. Keywords: Zirconia, Coprecipitation, Rare earth oxide, Phase transformation, Tetragonal, Activation energy

The effect of cerium addition on AZ91 magnesium alloy and its influence on stress corrosion cracking (SCC) were studied using constant load proof ring testing NaCl-K2CrO4 and ASTM D1384 solutions at 70 and 80% of yield stress, respectively. The investigation revealed that the optimum grain refinement of desired phases occurred with 0.5% addition of cerium. The addition levels of cerium above 1.5 wt.% to AZ91 alloy resulted in premature failures due to poor SCC resistance in both solutions (K2CrO4 and ASTM D1384 solutions). The microstructural studies of the experimental alloys were characterized by using optical and scanning electron microscopy. The elemental compositions of cerium-added AZ91 magnesium alloys were studied by energy-dispersive spectroscopy. The results indicate that the mode of SCC failure was found to be transgranular in nature along with secondary cracks containing cleavages which resulted from the hydrogen embrittlement and anodic dissolution phenomena. The AZ91 alloy with 0.5 wt.% cerium exhibits better mechanical properties and high stress corrosion resistance. [ABSTRACT FROM AUTHOR]

In this work multi-component equiatomic and non-equiatomic AlCoCrCuFeTix hexanary high-entropy alloys (HEA) was synthesised through mechanical alloying. The prepared powder was sintered via spark plasma sintering. Influence of alloying element variation in the multi-component system was studied in terms of phase formation and crystal structure by using Thermo-Calc and X-ray diffraction characterization technique (XRD). Particle morphology and chemical analysis studies were carried out through scanning electron microscopy along with Electron Dispersive X-ray Spectroscopy. The crystal structure and nano crystallinity of the hexanary system were recognised using transmission electron microscope (TEM and Selected Area Electron Diffraction [SAED]) while the formation of a solid solution was also studied and discussed. From the XRD and TEM characterisation of 20 h in, milled powders and sintered samples, it was confirmed that the developed HEA system forms a single solid solution BCC phase. The sintered alloy exhibits 97% relative density and an average hardness of 590 VHN. Special theme block on high entropy alloys, guest edited by Paula Alvaredo Olmos, Universidad Carlos III de Madrid, Spain, and Sheng Guo, Chalmers University, Gothenburg, Sweden. [ABSTRACT FROM AUTHOR]

Equi-atomic and non equi-atomic multi-component systems were synthesized through different routes to form high-entropy single solid solution. One such high-entropy alloy (HEA) with hexanary composition AlCoCrCuFeZn x was synthesized using mechanical alloying. The effect of zinc variation on the crystal structure and phase formation was characterized using XRD, FESEM with EDS and TEM. The synthesis resulted in both equi-atomic and non equi-atomic nano crystalline AlCoCrCuFeZn with a crystallite size less than 10 nm. [ABSTRACT FROM AUTHOR]