Search

Distributed power generation systems may necessitate connecting multiple independent energy sources that employ various converter topologies. A recent development in this field is the emergence of impedance source converters, offering the ability to deliver buck-boost functionality within a single stage. The split-source inverter (SSI) has been introduced as a novel choice in between this family. Many control strategies have emerged for electrical power systems control. Among the recent emerging controllers, model predictive control strategies have become an effective technique for control systems. Model predictive controllers (MPCs) offer a number of features compared to the conventional and counterpart models such as enhanced system response and improved system transients with reduced steady-state error. This research suggests a finite control-set MPC for three-phase single-stage SSI supporting a standalone load for remote area applications. Considering the proposed FCS-MPC, the output load current tracks its reference magnitude with minimized error. In addition, the proposed FCS-MPC enhances the proposed SSI system performance with a settling time of 10 μs, and approximately without overshoot in the output current. The system has been validated using Opal-RT OP-4510 and the power loss model of the inverter has been explained. In the end two comparisons have been presented to clarify the main points in the topology structure and the control technique. [ABSTRACT FROM AUTHOR]

Central-type photovoltaic (PV) inverters are used in most large-scale standalone and grid-tied PV applications due to the inverter's high efficiency and low-cost per kW generated. The perturbation and observation (P&O) and incremental conductance (IncCond) have become the most common techniques for maximum power point tracking (MPPT) strategies of PV/wind generation systems. Typically, the MPPT technique is applied in a two-stage operation; the first stage tracks the MPP and boosts the PV voltage to a certain level that complies with grid voltage, whereas the second stage represents the inversion stage that ties the PV system to the grid. Therefore, these common configurations increase the system size and cost as well as reduce its overall footprint. As a result, this paper applies two IncCond MPPT techniques on a proposed single-stage three-phase differential-flyback inverter (DFI). In addition, the three-phase DFI is analyzed for grid current negative-sequence harmonic compensation (NSHC). The proposed system efficiently provides a MPPT of the PV system and voltage boosting property of the DC-AC inverter in a single-stage operation. Moreover, the MPPT technique has been applied through the DFI using the conventional and modified IncCond tracking strategies. Furthermore, the system is validated for the grid-tied operation with the negative-sequence harmonic compensation strategy using computer-based simulation and is tested under uniform, step-change, as well as fast-changing irradiance profiles. The average efficiencies of the proposed system, considering the conventional and modified IncCond MPPT techniques, are 94.16% and 96.4% with tracking responses of 0.062 and 0.035 s and maximum overshoot of 46.15% and 15.38%, respectively. [ABSTRACT FROM AUTHOR]

This paper introduces a study of reduced devices count symmetric multilevel inverter (MLI) under two PWM techniques for AC applications. The MLI uses two DC sources to synthesize five‐level output voltage at a reduced switching devices number. The MLI employs five switching devices comprising the main and auxiliary circuits. The main circuit is a single‐phase H‐bridge inverter, which controls the output voltage polarity. The auxiliary circuit controls the input DC bus voltage by altering the number of the input DC cells to the frontend of the main circuit. Two PWM techniques are considered to control the MLI output based on minimum power loss and reduced total harmonic distortion, which in turn, elect the inverter application. To verify the effectiveness of the proposed MLI as well as the importance of the two PWM techniques, the five‐level inverter has been carried out experimentally using a laboratory prototype. DSPACE‐DS 1103 digital controller is utilized, to implement the experimental system controller, for controlled load voltage regulation. [ABSTRACT FROM AUTHOR]

This paper proposes a single-stage three-phase modular flyback differential inverter (MFBDI) for medium/high power solar PV grid-integrated applications. The proposed inverter structure consists of parallel modules of flyback DC-DC converters based on the required power level. The MFBDI offers many features for renewable energy applications, such as reduced components, single-stage power processing, high-power density, voltage-boosting property, improved footprint, flexibility with modular extension capability, and galvanic isolation. The proposed inverter has been modelled, designed, and scaled up to the required application rating. A new mathematical model of the proposed MFBDI is presented and analyzed with a time-varying duty-cycle, wide-range of frequency variation, and power balancing in order to display its grid current harmonic orders for grid-tied applications. In addition, an LPF-based harmonic compensation strategy is used for second-order harmonic component (SOHC) compensation. With the help of the compensation technique, the grid current THD is reduced from 36% to 4.6% by diminishing the SOHC from 51% to 0.8%. Moreover, the SOHC compensation technique eliminates third-order harmonic components from the DC input current. In addition, a 15% parameters mismatch has been applied between the flyback parallel modules to confirm the modular operation of the proposed MFBDI under modules divergence. In addition, SiC MOSFETs are used for inverter switches implementation, which decrease the inverter switching losses at high-switching frequency. The proposed MFBDI is verified by using three flyback parallel modules/phase using PSIM/Simulink software, with a rating of 5 kW, 200 V, and 50 kHz switching frequency, as well as experimental environments. [ABSTRACT FROM AUTHOR]

This paper proposes a three-phase isolated flyback inverter (IFBI) for single-stage grid-tied solar PV applications, considering a simple sinusoidal pulse-width modulation (SPWM) scheme. The proposed single-stage inverter employs a reduced passive elements count by considering three input-parallel output-differential (IPOD) flyback converter modules. Additionally, a single small size LC-input low-pass filter is utilized at the input paralleling point for ripple-free input current operation, which is essential in grid-connected renewable energy applications. In addition, a mathematical model of the IFBI is presented to confirm the existence of its low-order harmonic components. A simple PI controller-based control scheme, considering only two loops and five sensors, is used to control the proposed grid-tied IFBI. Continuous modulation scheme (CMS) combined with SPWM is used to diminish the low-frequency harmonic components. Moreover, a simple selective harmonic elimination (SHE) loop is used for second-order harmonic components (SOHC) elimination from grid-injected currents. The SHE has decreased the SOHC from 43% to 0.96%, which improves the grid current THD from 39% to 3.65%, to follow the IEEE harmonic standard limits. Additionally, the harmonic elimination technique decreases the circulating power between the inverter paralleled modules, which enhances the grid currents power factor. The proposed inverter is verified through a grid-connected 200 V, 1.6 kW, 60 Hz experimental prototype, and the switching frequency is 50 kHz. TMS-based DSP controller is used to control the grid-injected power to follow the reference power set-point. [ABSTRACT FROM AUTHOR]

This paper proposes a simple single-phase new pulse-width modulated seven-level inverter architecture for photovoltaic (PV) systems supporting home-grid with electric vehicle (EV) charging port. The proposed inverter includes a reduced number of power components and passive elements size, while showing less output-voltage total harmonic distortion (THD), and unity power factor operation. In addition, the proposed inverter requires simple control and switching strategies compared to recently published topologies. A comparative study was performed to compare the proposed inverter structure with the recent inverter topologies based on the number of components in the inverter circuit, number of components per output-voltage level, average number of active switches, THD, and operating efficiency as effective parameters for inverter performance evaluation. For design and validation purposes, numerical and analytical models for a grid-tied solar PV system driven by the proposed seven-level inverter were developed in MATLAB/Simulink environment. The inverter performance was evaluated considering grid-integration and stand-alone home with level-2 AC EV charger (3–6 kW). Compared with recently published topologies, the proposed inverter utilizes a reduced number of power components (7 switches) for seven-level terminal voltage synthesis. An experimental prototype for proposed inverter with the associated controller was built and tested for a stand-alone and grid-integrated system. Due to the lower number of ON-switches, the inverter operating efficiency was enhanced to 92.86% with load current THD of 3.43% that follows the IEEE standards for DER applications. [ABSTRACT FROM AUTHOR]