Search

The oxide/metal interface induced by surface segregation of oxygen during the annealing of a Nb single crystal in UHV has been studied by photoemission spectroscopy with synchrotron radiation. With 260 and 350 eV photons, four well-resolved peaks A, B, C, D are found in spectra within the 200-210 eV range of binding energy. One couple of peaks (A and C) is associated with 3d[sup 5/2] and 3d[sup 3/2] core levels of Nb atoms in the metal while the other one (B and D), shifted by 1.4 eV when compared to A and C, corresponds to 3d levels of oxidized Nb atoms. The metal peak A at 202.3 eV is formed by three 3d[sup 5/2] components: a peak due to a metallic state (202.1 eV) and two components shifted by 0.2 and 0.5 eV, which are attributed to Nb[sub 6]O and Nb[sub 4]O compounds due to interstitial atoms of oxygen, respectively. The estimated concentration of the interstitial oxygen atoms in the nanometer-thick metal skin underlying the NbO/Nb interface corresponds to a large enrichment when compared to the one in the Nb bulk. [ABSTRACT FROM AUTHOR]

The possibility to use the tip of a scanning tunneling microscope (STM) for the realization of a highly localized molecular light source is discussed. Engineering rules for the control of single molecule luminescence at metallic interfaces are first presented: we report controlled patterning of graphite substrates with well-defined 3D molecular nanostructures using the steered arrangement of multilayered [2.2] paracyclophane-based building blocks. Their in-plane self-assembly is shown to allow exact positioning of vertical structural elements with precisely defined nanoscale spacing both in the substrate plane and in a direction perpendicular to it. In a second part, we demonstrate that electric field induced second harmonic generation (SHG) processes can also be taken into profit to get localized light emission through controlled local electric field application using the STM tip as an electrode. Efficient SHG emission at the tip can be observed when the tip is immersed in a solution of highly nonlinear molecules: the electric field present at the tip apex is shown to lead to local noncentrosymmetry following molecular orientation. [ABSTRACT FROM AUTHOR]

Bottom-up engineering is a very attractive field. However, the periodic organization of molecules on a solid substrate is challenging, particularly in the selection of the appropriate characterization technique which is suitable for both large area and accurate analysis at the nanoscale. Here, this study demonstrates the unambiguous identification of complex molecular layers by infrared absorption microscopy at the nanometric scale. This technique allowed for the direct observation of the presence of isolated polyoxometalate-based nanoclusters dispersed all over a substrate., Competing Interests: Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

Clusters and oxo-clusters are drawing attention for their amazing physical properties, especially at the scale of the single molecule. However, chemical methods to organize them individually on a surface are still lacking. In this study we show that it is possible to periodically organize individual polyoxometalates thanks to their ordering by a new supramolecular assembly.

Surface-confined host-guest chemistry at the air/solid interface is used for trapping a functionalized 3D Zn-phthalocyanine complex into a 2D porous supramolecular template allowing the large area functionalization of an sp2-hybridized carbon-based substrate as evidenced by STM, resonance Raman spectroscopy, and water contact angle measurements.

We propose a novel approach to trap 2 nm Pt nanocrystals using nanoporous two-dimensional supramolecular networks for cavity-confined host-guest recognition process. This will be achieved by taking advantage of two features of supramolecular self-assembly at surfaces: First, its capability to allow the formation of complex 2D architectures, more particularly, nanoporous networks, through noncovalent interactions between organic molecular building-blocks; second, the ability of the nanopores to selectively host and immobilize a large variety of guest species. In this paper, for the first time, we will use isotropic honeycomb networks and anisotropic linear porous supramolecular networks to host 2 nm Pt nanocrystals.

The Young's modulus of three-dimensional self-assembled Ag nanocrystals, as so-called supracrystals, is correlated with the type of coating agent as well as the nanocrystal morphology. The Young's moduli of supracrystals of icosahedral Ag nanocrystals are measured in the range of tens to hundreds of megapascals revealing an extremely soft mechanical behavior. The alkylamine molecules used as coating agents weakly interact with the Ag nanocrystal surface favoring translational and orientational ordering of atomic lattice planes of nanocrystals. Under such experimental conditions, both the average distance between nanocrystals and the increase of the nanocrystal diameter control the measured Young's modulus: it increases with decreasing interparticle distance and increasing nanocrystal diameter. When dodecylamine (C 12 NH 2 ) molecules are replaced by dodecanethiol (C 12 SH), the orientational ordering between nanocrystals, produced from the same batch as C 12 NH 2 , disappears by inducing a drop in the Young's modulus. This is attributed to the formation of a "skin" at the nanocrystal surface causing a transition from shaped to spherical nanocrystals. Finally, by comparing with various studies performed in our group with Co and Au nanocrystals, we explain the formation of such extremely soft materials with Ag nanocrystals by both the strength of the binding between nanocrystals and coating agents and the ligand-ligand interactions.

We study the influence of the size and nanocrystallinity of dodecanethiol-coated gold nanocrystals (NCs) on the stiffness of 3D self-assembled NC superlattices (called supracrystals). Using single domain and polycrystalline NCs as building blocks for supracrystals, it is shown that the stiffness of supracrystals can be tuned upon change in relative amounts of single and polycrystalline NCs.

For self-assembled nanocrystals in three-dimensional (3D) superlattices, called supracrystals, the crystalline structure of the metal nanocrystals (either single domain or polycrystalline) or nanocrystallinity is likely to induce significant changes in the physical properties. Previous studies demonstrated that spontaneous nanocrystallinity segregation takes place in colloidal solution upon self-assembling of 5 nm dodecanethiol-passivated Au nanocrystals. This segregation allows the exclusive selection of single domain and polycrystalline nanoparticles and consequently producing supracrystals with these building blocks. Here, we investigate the influence of nanocrystallinity on different properties of nanocrystals with either single domain or polycrystalline structure. In particular, the influence of nanocrystallinity on the localized surface plasmon resonance of individual nanocrystals dispersed in the same dielectric media is reported. Moreover, the frequencies of the radial breathing mode of single domain and polycrystalline nanoparticles are measured. Finally, the orientational ordering of single domain nanocrystals markedly changes the supracrystal elastic moduli compared to supracrystals of polycrystalline nanocrystals.

We investigated the electronic properties of highly ordered three-dimensional colloidal crystals of gold nanocrystals (7 ± 0.4 nm), called supracrystals. Two kinds of Au supracrystals with typical thicknesses of 300 nm and 5 μm, respectively, are probed for the first time with scanning tunneling microscopy/spectroscopy at 5 K revealing similar power law behavior and showing homogeneous conductance with the fingerprint of isolated nanocrystal. Potential applications evading the size-related risks of nanocrystals could be then considered., (© 2012 American Chemical Society)

Natural systems give the route to design periodic arrangements with mesoscopic architecture using individual nanocrystals as building blocks forming colloidal crystals or supracrystals. The collective properties of such supracrystals are one of the main driving forces in materials research for the 21st century with potential applications in electronics or biomedical environments. Here we describe two simultaneous supracrystal growth processes from gold nanocrystal suspension, taking place in solution and at the air-liquid interface. Furthermore, the growth processes involve the crystallinity selection of nanocrystals and induce marked changes in the supracrystal mechanical properties., (© 2012 American Chemical Society)

Here, 5 nm Ag nanocrystals are deposited, using the same procedure, on various substrates differing by their rms roughness, wetting properties and nanoparticle-substrate interactions leading, consequently, to different nanocrystal orderings. Theoretical calculations are carried out to understand how these parameters influence the size of the nanocrystal organizations on the substrate surface. When these nanocrystal arrays are subjected to an oxygen plasma treatment, the nanocrystals perfectly assembled in hexagonal networks remain intact, while the nanocrystals that are not well-packed coalesce to form larger particles independently on the used substrate. This phenomenon is observed on the entire substrate surface. This procedure gives an innovative way of using oxygen plasma generated by the reactive ion etching technique, as a new method to reveal defects in 2D Ag nanocrystal self-assemblies.

Multiwalled carbon nanotubes (MWCNTs) were used as nanotemplates for the dispersion and stabilization of FePt nanoparticles (NPs). Pre-formed capped FePt NPs were connected to the MWCNTs external surface via covalent binding through organic linkers. Free FePt NPs and MWCNTs-FePt hybrids were annealed in vacuum at 700 degrees C in order to achieve the L1(0) ordering of the FePt phase. Both as prepared and annealed samples were characterized and studied using a combination of experimental techniques, such as Raman and Mössbauer spectroscopies, powder X-ray Diffraction (XRD), magnetization and transmittion electron microscopy (TEM) measurements. TEM measurements of the hybrid sample before annealing show that a fine dispersion of NPs along the MWCNTs surface is achieved, while a certain amount of free particles attached to each other in well connected dense assemblies of periodical or non-periodical particle arrangements is also observed. XRD measurements reveal that the FePt phase has the face-centered cubic (fcc) disordered crystal structure in the as prepared samples, which is transformed to the face-centered tetragonal (fct) L1(0) ordered crystal structure after annealing. An increase in the average particle size is observed after annealing, which is higher for the free NPs sample. Superparamagnetic phenomena due to the small FePt particle size are observed in the Mössbauer spectra of the as prepared samples. Mössbauer and magnetization measurements of the MWCNTs-FePt hybrids sample reveal that the part of the FePt particles attached to the MWCNTs surface shows superparamagnetic phenomena at RT even after the annealing process. The hard magnetic L1(0) phase characteristics are evident in the magnetization measurements of both samples after annealing, with the coercivity of the hybrid sample over-scaling that of the free NPs sample by a factor of 1.25.

The charge transport properties of single superconducting tin nanowires encapsulated by multiwalled carbon nanotubes have been investigated by multiprobe measurements. The multiwalled carbon nanotube protects the tin nanowire from oxidation and shape fragmentation and therefore allows us to investigate the electronic properties of stable wires with diameters as small as 25 nm. The transparency of the contact between the Ti/Au electrode and nanowire can be tuned by argon ion etching the multiwalled nanotube. Application of a large electrical current results in local heating at the contact which in turn suppresses superconductivity.

We report a study of acid-terminated self-assembled monolayers of alkanethiols of different length, 11-mercaptoundecanoic acid (11-MUA) and 16-mercaptohexadecanoic acid (16-MHDA), on Au(111). Scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and contact angle techniques were used for characterization, and the results were compared with those obtained from n-alkanethiols of similar chain length, providing a detailed description of the two-dimensional crystalline structure. Molecular resolution STM images show that 11-MUA forms a dense-packed monolayer arranged in a (square root 3 x square root 3)R30 degrees structure with a c(2 x 4) superlattice, where the simple hexagonal phase, the c(2 x 4) superlattice, and nonordered areas coexist. 16-MHDA assembles in a uniform monolayer with similar morphology to that of 11-MUA, but molecular resolution could not be reached in STM due to both the hydrophilicity of the acid groups and the poor conductivity of the thick monolayer. Nevertheless, the monolayer thicknesses estimated by XPS and electrochemistry and the highly blocking character of the film observed by electrochemistry as well as the low water contact angle are consistent with 16-MHDA molecules forming a compact monolayer on the Au(111) substrate with fully extended alkyl chains and acid groups pointing away from the surface. The results obtained for 16-MHDA were reproducible under different preparation conditions such as the addition or omission of acetic acid to the ethanolic solution. Contrary to other reports, we demonstrate that ordered acid-terminated self-assembled monolayers are obtained with the same preparation conditions as those of the methyl-terminated ones, without any additional treatment.

Superconducting low dimensional systems are the natural choice for fast and sensitive infrared detection, because of their quantum nature and the low-noise, cryogenic operation environment. On the other hand, monochromatic and coherent electron beams, emitted from superconductors and carbon-based nanostructured materials, respectively, are significant for the development of electron optical systems such as electron microscopes and electron-beam nanofabrication systems. Here we describe for the first time a simple method which yields carbon nanotubes encapsulating single crystalline superconducting tin nanowires by employing the catalytic chemical vapor deposition method over solid tin dioxide. The superconducting tin nanowires, with diameters 15-35 nm, are covered with well-graphitized carbon walls and show, due to their reduced diameters, a critical magnetic field (Hc) more than 30 times higher than the value of bulk metallic tin.

Surface enhanced second harmonic generation (SE SHG) experiments on molecular structures, macrocycles, catenanes, and rotaxanes, deposited as monolayers and multilayers by vacuum sublimation on silver, are reported. The measurements show that the molecules form ordered thin films, where the highest degree of order is observed in the case of macrocycle monolayers and the lowest in the case of rotaxane multilayers. The second harmonic generation activity is interpreted in terms of electric field induced second harmonic (EFISH) generation where the electric field is created by the substrate silver atoms. The measured second order nonlinear optical susceptibility for a rotaxane thin film is compared with that obtained by considering only EFISH contribution to SHG intensity. The electric field on the surface of a silver layer is calculated by using the Delphi4 program for structures obtained with TINKER molecular mechanics/dynamics simulations. An excellent agreement is observed between the calculated and the measured SHG susceptibilities.