Search

This work reports on fully integrated "sample‐in‐signal‐out" microfluidic paper‐based analytical devices (μPADs) relying on bioluminescence resonance energy transfer (BRET) switches for analyte recognition and colorimetric signal generation. The devices use BRET‐based antibody sensing proteins integrated into vertically assembled layers of functionalized paper, and their design enables sample volume‐independent and fully reagent‐free operation, including on‐device blood plasma separation. User operation is limited to the application of a single drop (20–30 μL) of sample (serum, whole blood) and the acquisition of a photograph 20 min after sample introduction, with no requirement for precise pipetting, liquid handling, or analytical equipment except for a camera. Simultaneous detection of three different antibodies (anti‐HIV1, anti‐HA, and anti‐DEN1) in whole blood was achieved. Given its simplicity, this type of device is ideally suited for user‐friendly point‐of‐care testing in low‐resource environments. A single drop of blood on paper: Bioluminescent sensing proteins integrated into a multi‐layer paper‐based device allow the user‐friendly and simple quantification of monoclonal antibodies from a single drop of blood by simple color change monitoring. [ABSTRACT FROM AUTHOR]

Antibody detection is of fundamental importance in many diagnostic and bioanalytical assays, yet current detection techniques tend to be laborious and/or expensive. We present a new sensor platform (LUMABS) based on bioluminescence resonance energy transfer (BRET) that allows detection of antibodies directly in solution using a smartphone as the sole piece of equipment. LUMABS are single-protein sensors that consist of the blue-light emitting luciferase NanoLuc connected via a semiflexible linker to the green fluorescent acceptor protein mNeonGreen, which are kept close together using helper domains. Binding of an antibody to epitope sequences flanking the linker disrupts the interaction between the helper domains, resulting in a large decrease in BRET efficiency. The resulting change in color of the emitted light from green-blue to blue can be detected directly in blood plasma, even at picomolar concentrations of antibody. Moreover, the modular architecture of LUMABS allows changing of target specificity by simple exchange of epitope sequences, as demonstrated here for antibodies against HIV1-p17, hemagglutinin (HA), and dengue virus type I. The combination of sensitive ratiometric bioluminescent detection and the intrinsic modularity of the LUMABS design provides an attractive generic platform for point-of-care antibody detection that avoids the complex liquid handling steps associated with conventional immunoassays. [ABSTRACT FROM AUTHOR]

An optical calcium sensor is fabricated based on a cholesteric liquid crystalline (CLC) polymer containing benzoic acid metal binding sites. A chiral imprinted CLC polymer is made which is subsequently treated with KOH to yield a responsive green reflecting film. On investigation of various metal ions, the polymer film shows a high optical response, and selectivity for calcium ions, which is related to the preorganized binding sites in the ordered liquid crystalline phase, leading to a blue reflecting film. The photonic polymer film is sensitive to Ca2+ within the physiologically relevant concentration range of 10−4 to 10−2 m. Measurement of total calcium concentration in serum is also investigated using the film. The optical responses of normal serum and samples mimicking hypocalcemia and hypercalcemia can be clearly distinguished, providing a cheap, battery-free, and easy-to-use alternative for calcium determination in clinical diagnostics. [ABSTRACT FROM AUTHOR]

Detecting antibodies in blood is as simple as it can get. In their Communication on page 15369 ff., D. Citterio, M. Merkx et al. integrate antibody‐targeting bioluminescent sensing proteins and other essential assay components into a microfluidic paper‐based analytical device. A drop of blood, a digital camera, and twenty minutes are all that is required to detect the presence and the concentration of multiple antibodies in whole blood based on the color of the emitted light. [ABSTRACT FROM AUTHOR]

Copyright of Angewandte Chemie is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

On page 1154, A. P. H. J. Schenning and co‐workers fabricate an optical calcium sensor based on cholesteric liquid crystalline polymer containing benzoic acid metal binding sites. This sensor enables detection of calcium ions in aqueous solutions, with a color change from green to blue discernable by the naked eye, providing a cheap, battery‐free, and easy‐to‐use alternative for calcium determination in clinical diagnostics. [ABSTRACT FROM AUTHOR]

Here we present LUCOS (Luminescent Competition Sensor), a modular and broadly applicable bioluminescent diagnostic platform enabling the detection of both small molecules and protein biomarkers. The construction of LUCOS sensors entails the covalent and site-specific coupling of a bioluminescent sensor component to an analyte-specific antibody via protein G-mediated photoconjugation. Target detection is accomplished through intramolecular competition with a tethered analyte competitor for antibody binding. We established two variants of LUCOS: an inherent ratiometric LUCOSR variant and an intensiometric LUCOSI version, which can be used for ratiometric detection upon the addition of a split calibrator luciferase. To demonstrate the versatility of the LUCOS platform, sensors were developed for the detection of the small molecule cortisol and the protein biomarker NT-proBNP. Sensors for both targets displayed analyte-dependent changes in the emission ratio and enabled detection in the micromolar concentration range ( K D,app = 16-92 μM). Furthermore, we showed that the response range of the LUCOS sensor can be adjusted by attenuating the affinity of the tethered NT-proBNP competitor, which enabled detection in the nanomolar concentration range ( K D,app = 317 ± 26 nM). Overall, the LUCOS platform offers a highly versatile and easy method to convert commercially available monoclonal antibodies into bioluminescent biosensors that provide a homogeneous alternative for the competitive immunoassay.

Bioluminescent antibodies represent attractive detection agents in both bioanalytical assays and imaging. Currently, their preparation relies on genetic fusion of luciferases to antibodies or nonspecific chemical conjugation strategies. Here, we report a generic method to generate well-defined covalent antibody-luciferase conjugates starting from commercially available monoclonal antibodies. Our approach uses fusion proteins consisting of the bright blue light-emitting luciferase NanoLuc (NL) and an Fc-binding protein domain (Gx) that can be photo-cross-linked to the antibody using UV light illumination. Green and red color variants were constructed by tight fusion of the NanoLuc with a green fluorescent acceptor domain and introduction of Cy3, respectively. To increase the already bright NanoLuc emission, tandem fusions were successfully developed in which the Gx domain is fused to two or three copies of the NanoLuc domain. The Gx-NL fusion proteins can be efficiently photo-cross-linked to all human immunoglobulin G (IgG) isotypes and most mammalian IgG's using 365 nm light, yielding antibodies with either one or two luciferase domains. The bioluminescent antibodies were successfully used in cell immunostaining and bioanalytical assays such as enzyme-linked immunosorbent assay (ELISA) and Western blotting.

Bioluminescent sensor proteins provide attractive tools for applications ranging from in vivo imaging to point-of-care testing. Here we introduce a new class of ratiometric bioluminescent sensor proteins that do not rely on direct modulation of BRET efficiency, but are based on competitive intramolecular complementation of split NanoLuc luciferase. Proof of concept for the feasibility of this sensor principle was provided by developing a blue-red light emitting sensor protein for the detection of anti-HIV1-p17 antibodies with a 500% change in emission ratio and a K d of 10 pM. The new sensor design also improved the dynamic response of a sensor for the therapeutic antibody cetuximab 4-fold, allowing the direct quantification of this anti-EGFR antibody in undiluted blood plasma. The modular sensor architecture allows easy and systematic tuning of a sensor's dynamic range and should be generally applicable to allow rational engineering of bioluminescent sensor proteins.

This work reports on fully integrated "sample-in-signal-out" microfluidic paper-based analytical devices (μPADs) relying on bioluminescence resonance energy transfer (BRET) switches for analyte recognition and colorimetric signal generation. The devices use BRET-based antibody sensing proteins integrated into vertically assembled layers of functionalized paper, and their design enables sample volume-independent and fully reagent-free operation, including on-device blood plasma separation. User operation is limited to the application of a single drop (20-30 μL) of sample (serum, whole blood) and the acquisition of a photograph 20 min after sample introduction, with no requirement for precise pipetting, liquid handling, or analytical equipment except for a camera. Simultaneous detection of three different antibodies (anti-HIV1, anti-HA, and anti-DEN1) in whole blood was achieved. Given its simplicity, this type of device is ideally suited for user-friendly point-of-care testing in low-resource environments., (© 2018 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Single-step immunoassays that can be performed directly in solution are ideally suited for point-of-care diagnostics. Our group recently developed a new platform of bioluminescent sensor proteins (LUMABS; LUMinescent AntiBody Sensor) that allow antibody detection in blood plasma. Thus far, LUMABS has been limited to the detection of antibodies recognizing natural peptide epitopes. Here, we report the development of semisynthetic LUMABS sensors that recognize nonpeptide epitopes. The non-natural amino acid para-azidophenylalanine was introduced at the position of the original antibody-recognition sites as a chemical handle to enable site-specific conjugation of synthetic epitope molecules coupled to a dibenzocylcooctyne moiety via strain-promoted click chemistry. The approach was successfully demonstrated by developing semisynthetic LUMABS sensors for antibodies targeting the small molecules dinitrophenol and creatinine (DNP-LUMABS and CR-LUMABS) with affinities of 5.8 pM and 1.3 nM, respectively. An important application of these semisynthetic LUMABS is the detection of small molecules using a competitive assay format, which is demonstrated here for the detection of creatinine. Using a preassembled complex of CR-LUMABS and an anti-creatinine antibody, the detection of high micromolar concentrations of creatinine was possible both in buffer and in 1:1 diluted blood plasma. The use of semisynthetic LUMABS sensors significantly expands the range of antibody targets and enables the application of LUMABS sensors for the ratiometric bioluminescent detection of small molecules using a competitive immunoassay format.

FRET-based caspase activity probes have become important tools to monitor apoptotic cell signaling. However, their dependence on external illumination is incompatible with light sensitive cells and hampers applications that suffer from autofluorescence and light scattering. Here we report the development of three caspase sensor proteins based on Bioluminescence Resonance Energy Transfer (BRET) that retain the advantages of genetically encoded, ratiometric optical probes but do not require external illumination. These sensors consist of the bright and stable luciferase NanoLuc and the fluorescent protein mNeonGreen, fused together via a linker containing a recognition site for caspase-3, -8, or -9. In vitro characterization showed that each caspase sensor displayed a robust 10-fold decrease in BRET ratio upon linker cleavage, with modest caspase specificity. Importantly, whereas scattering and background fluorescence precluded FRET-based detection of intracellular caspase activity in plate-reader assays, such measurements could be easily performed using our caspase BRET sensors in a high throughput format. The brightness of the BRET sensors also enabled long-term single-cell imaging, allowing BRET-based recording of cell heterogeneity in caspase activity in a heterogenic cell population.

FRET-sensors have become important tools for intracellular imaging, but their dependence on external illumination presents some limitations, such as photobleaching and phototoxicity, which limit measurements over extended periods of time. Fluorescence measurements also suffer from autofluorescence and light scattering, which hampers in vivo imaging and measurements in strongly absorbing and scattering media such as blood. In principle, these issues can be resolved by using sensors based on bioluminescence resonance energy transfer (BRET). The recent development of brighter and more stable luciferases and the concomitant improvement in luciferase substrates have substantially decreased the sensitivity gap between fluorescence and bioluminescence. As a result, the application of BRET-sensors is no longer restricted to measurements on cell populations, but they can also be used for imaging of single living cells, and BRET has started to emerge as an attractive sensor format for point-of-care diagnostics. The aim of this chapter is to first provide a brief overview of the basic design principles for BRET-sensors. Next, important design considerations will be discussed in more detail by describing the development of three different classes of BRET-sensors, both from our own work and that of others. These examples are all based on the NanoLuc luciferase, a bright and very stable blue light-emitting luciferase developed by Promega that has quickly risen to prominence in the bioluminescence field., (© 2017 Elsevier Inc. All rights reserved.)

Elucidation of subcellular signaling networks by multiparameter imaging is hindered by a lack of sensitive FRET pairs spectrally compatible with the classic CFP/YFP pair. Here, we present a generic strategy to enhance the traditionally poor sensitivity of red FRET sensors by developing self-associating variants of mOrange and mCherry that allow sensors to switch between well-defined on- and off states. Requiring just a single mutation of the mFruit domain, this new FRET pair improved the dynamic range of protease sensors up to 10-fold and was essential to generate functional red variants of CFP-YFP-based Zn(2+) sensors. The large dynamic range afforded by the new red FRET pair allowed simultaneous use of differently colored Zn(2+) FRET sensors to image Zn(2+) over a broad concentration range in the same cellular compartment.