42 results on '"Bernet, Steffen"'
Search Results
2. Design of LCL filters of active-front-end two-level voltage-source converters
- Author
-
Jalili, Kamran and Bernet, Steffen
- Subjects
Electric current converters -- Design and construction ,Damping (Mechanics) -- Control ,Electric filters -- Design and construction ,Industrial electronics -- Research ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper introduces a new iterative design procedure of L and LCL filters for low-voltage active-front-end PWM two-level voltage source converters. The analytical expression of the converter harmonic voltages by Bessel functions is applied to design the filter parameters for defined maximum grid current harmonics. Different filter designs are derived for various resonance frequencies and inductance split factors of LCL filter. The minimum amount of stored energy of passive components is used to select a final filter design. A voltage-oriented control scheme, including active damping, is applied in the (400 V and 50 kVA) experimental setup. Both simulation and experimental investigations are presented to verify the accuracy of the filter design procedure. Finally, the steady state and transient performance of the active front end with different LCL filters are depicted. Index Terms--Active damping, active front end, LCL filter.
- Published
- 2009
3. How to select the system voltage of MV drives--a comparison of semiconductor expenses
- Author
-
Sayago, Jose A., Bruckner, Thomas, and Bernet, Steffen
- Subjects
Bipolar transistors -- Design and construction ,Electric current converters -- Design and construction ,Electric driving -- Design and construction ,Electric driving -- Energy use ,Voltage -- Measurement ,Cost benefit analysis -- Methods ,Electric current converter ,Cost benefit analysis ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
The application of a particular medium-voltage converter in a certain application depends on numerous criteria. However, in completely new installations, the choice of the system voltage is very often uninhibited of external constraints. Then, the voltage level shall be selected to enable the most efficient power conversion at the lowest cost. This paper is dedicated to help in finding the best voltage level for three-level neutral-point-clamped voltage source converters (3L-NPC VSCs) with respect to the power semiconductor devices. Three insulated-gate-bipolar-transistor-based 3L-NPC VSCs of different voltage levels (2.3, 3.3, and 4.16 kV) are investigated and compared regarding their maximum output power, semiconductor efficiency, and semiconductor cost per MVA output power. The effects of thermal cycling, the loss distribution within the converter, and switching frequencies from 300 to 1050 Hz are considered in the evaluation. Index Terms--Insulated gate bipolar transistor (IGBT) converters, medium-voltage (MV) converters, three-level converters.
- Published
- 2008
4. Current-source converter and cycloconverter topologies for industrial medium-voltage drives
- Author
-
Wu, Bin, Pontt, Jorge, Rodriguez, Jose, Bernet, Steffen, and Kouro, Samir
- Subjects
Electric current converters -- Properties ,Modulation (Electronics) -- Methods ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper, along with an earlier published paper as Part 1, provides a comprehensive review of the state of the art of high-power converters (above 1 MW) for adjustable-speed ac drives. In this highly active area, different converter topologies have been developed for various drive applications in the industry. Due to its extensive coverage, the subject is divided into two parts: multilevel voltage source and current source converter topologies. This paper is focused on the second part and covers the current source converter technologies, including pulsewidth-modulated current-source inverters (CSIs) and load-commutated inverters. In addition, this paper also addresses the present status of the direct converter, which is also known as cycloconverter (CCV). This paper focuses on the latest CSI and CCV technologies and an overview of the commonly used modulation schemes. It also provides the latest technological advances and future trends in CSI- and CCV-fed large drives. This paper serves as a useful reference for academic researchers and practicing engineers in the field of power converters and adjustable-speed drives. Index Terms--Current-source inverter (CSI), cycloconverter (CCV), high-power drives, load-commutated inverter (LCI).
- Published
- 2008
5. Behavior of PWM active front ends in the presence of parallel thyristor converters
- Author
-
Jalili, Kamran, Weitendorf, Niels, and Bernet, Steffen
- Subjects
Electric current converters -- Design and construction ,Harmonics (Electric waves) -- Properties ,Pulse-duration modulation -- Methods ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper investigates the effects of grid voltage distortions caused by thyristor converters on the steady-state performance of a pulsewidth modulation (PWM) rectifier with dc voltage link for low-voltage applications. The disturbance transfer function of the current control loop is used to analyze the effects of grid distortions. Influences of the current controller, the phase-locked loop parameters, and the filter inductance on the generated current harmonics are presented. For existing grid voltage harmonics, the amplitude of the corresponding current harmonics are determined and compared to measured current harmonics using a 400-V 40-kW test bench consisting of a PWM rectifier with voltage dc link parallel to a 40-kW thyristor converter. Index Terms--Harmonic distortion, pulsewidth modulation (PWM) active front ends, thyristor converters.
- Published
- 2008
6. Multilevel voltage-source-converter topologies for industrial medium-voltage drives
- Author
-
Rodriguez, Jose, Bernet, Steffen, Wu, Bin, Pontt, Jorge, and Kouro, Samir
- Subjects
Electric driving -- Equipment and supplies ,Voltage -- Measurement ,Electric inverters -- Design and construction ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper presents a technology review of voltage-source-converter topologies for industrial medium-voltage drives. In this highly active area, different converter topologies and circuits have found their application in the market. This paper covers the high-power voltage-source inverter and the most used multilevel-inverter topologies, including the neutral-pointclamped, cascaded H-bridge, and flying-capacitor converters. This paper presents the operating principle of each topology and a review of the most relevant modulation methods, focused mainly on those used by industry. In addition, the latest advances and future trends of the technology are discussed. It is concluded that the topology and modulation-method selection are closely related to each particular application, leaving a space on the market for all the different solutions, depending on their unique features and limitations like power or voltage level, dynamic performance, reliability, costs, and other technical specifications. Index Terms--High-power applications, multilevel converters, voltage-source inverters (VSIs).
- Published
- 2007
7. Comparison of 2.3-kV medium-voltage multilevel converters for industrial medium-voltage drives
- Author
-
Krug, Dietmar, Bernet, Steffen, Fazel, Seyed Saeed, Jalili, Kamran, and Malinowski, Mariusz
- Subjects
Electric current converters -- Design and construction ,Power electronics -- Research ,Voltage -- Measurement ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper compares the expense of power semiconductors and passive components of a (2.3 kV, 2.4 MVA) two-level, three-level neutral-point-clamped, three-level flying-capacitor, four-level flying-capacitor, and five-level series-connected H-bridge voltage source converter on the basis of the state-of-the-art 6.5-, 3.3-, 2.5-, and 1.7-kV insulated gate bipolar transistors for industrial medium-voltage drives. The power semiconductor losses, the loss distribution, the installed switch power, the design of flying capacitors, and the components of an LC sine filter for retrofit applications are considered. Index Terms--Filter design, medium voltage, multilevel converters, power electronics.
- Published
- 2007
8. Feedforward loss control of three-level active NPC converters
- Author
-
Bruckner, Thomas, Bernet, Steffen, and Steimer, Peter K.
- Subjects
Electric current converters -- Design and construction ,Feedforward control systems -- Design and construction ,Voltage -- Measurement ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
The three-level neutral-point-clamped voltage-source converter (NPC VSC) is widely used in high-power medium-voltage (MV) applications. To overcome its major drawback--the unequal loss distribution among the semiconductors-the use of active NPC (ANPC) switches was previously proposed. In this paper, a simple feedforward loss-control scheme for the ANPC converter is presented. The principle of operation of the ANPC VSC is experimentally verified for the first time. Electrical measurements on a low-voltage test bench prove the proper function of the ANPC converter. Infrared junction temperature measurements confirm the improved loss distribution using the new loss-control scheme. Finally, the authors demonstrate the superior performance of the loss-controlled ANPC converter in various MV applications. Index Terms--Medium-voltage (MV) converters, multilevel converters.
- Published
- 2007
9. Design and comparison of 4-kV neutral-point-clamped, flying-capacitor, and series-connected H-bridge multilevel converters
- Author
-
Fazel, Seyed Saeed, Bernet, Steffen, Krug, Dietmar, and Jalili, Kamran
- Subjects
Electric current converters -- Analysis ,Electric current converter ,Semiconductor device ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper describes the design of a (4-kV, 4.16-MVA) three-level neutral-point-clamped-, three-level flying-capacitor-, four-level flying-capacitor-, and nine-level series-connected H-bridge voltage-source converter on the basis of state-of-the-art 6.5-, 4.5-, 3.3- and 1.7-kV insulated gate bipolar transistors. The semiconductor loss distribution and the design of semiconductors and passive components are compared for a medium switching frequency assuming a constant converter efficiency of about 99%. To evaluate the converter characteristics in high switching frequency applications, a second comparison is realized for the maximum switching frequencies assuming a constant expense of semiconductors in all converters. Index Terms--Medium-voltage drives (MVDs), multilevel converters, power electronics.
- Published
- 2007
10. Estimation and measurement of junction temperatures in a three-level voltage source converter
- Author
-
Bruckner, Thomas and Bernet, Steffen
- Subjects
Electric current converters -- Research ,Bipolar transistors -- Research ,Temperature -- Measurement ,Temperature -- Research ,Electric current converter ,Business ,Electronics ,Electronics and electrical industries - Abstract
The design of a power converter must guarantee that the operating junction temperatures [V.sub.j] of all devices do not exceed their limits under all specified operating conditions. Usually, this is ensured by a simulative or analytical junction temperature estimation based on simple electrical and thermal models and semiconductor datasheet values. This paper discusses the difficulties and quantifies the limitations of this approach on the example of a three-level neutral point clamped voltage source converter (NPC VSC) with insulated gate bipolar transistors. The calculations are compared to the results of direct junction temperature measurements with an infrared camera. The paper also provides the experimental proof for the unequal loss and junction temperature distribution in the three-level NPC VSC. Index Terms--Insulated gate bipolar transistors (IGBT), Junction temperature measurement, neutral point clamped voltage source converter (NPC VSC), thermal modeling.
- Published
- 2007
11. Power loss-oriented evaluation of high voltage IGBTS and multilevel converters in transformerless traction applications
- Author
-
Dieckerhoff, Sibylle, Bernet, Steffen, and Krug, Dietmar
- Subjects
Electric current converters -- Design and construction ,Electric current converters -- Analysis ,Bipolar transistors -- Usage ,Electric current converter ,Business ,Electronics ,Electronics and electrical industries - Abstract
The low-frequency line transformer in todays ac rail vehicles suffers from poor efficiency and a substantial weight. Future traction drives may operate directly from the mains without this transformer. A feasible concept for a transformerless drive system consists of series connected medium voltage converters applying modern high-voltage insulated gate bipolar transistors (HV-IGBTs). In a first design step, the switching characteristics and losses of 6.5-kV IGBTs are compared to 3.3-kV and 4.5-kV IGBTs which are already commercially used in traction applications. Based on the considered HV-IGBTs, the properties of multilevel converters are analyzed and their applicability to the transformerless system is evaluated. The paper focusses on a loss analysis of the converters. Reliability aspects and harmonic spectra are briefly discussed. Taking these design aspects into account, the three-level neutral point clamped converter turns out to be a reasonable solution to realize line and motor converter modules in a transformerless traction system. Index Terms--Flying capacitor (FC) converter, gate turn-off thyristors (GTOs), high-voltage insulated gate bipolar transistors (HV-IGBTs), neutral point clamped (NPC) converter.
- Published
- 2005
12. The active NPC converter and its loss-balancing control
- Author
-
Bruckner, Thomas, Bernet, Steffen, and Guldner, Henry
- Subjects
Electric current converters -- Research ,Semiconductor device ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
The three-level neutral-point-clamped voltage-source converter (NPC VSC) is widely used in high-power medium-voltage applications. The unequal loss distribution among the semiconductors is one major disadvantage of this popular topology. This paper studies the loss distribution problem of the NPC VSC and proposes the active NPC VSC to overcome this drawback. The switch states and commutations of the converter are analyzed. A loss-balancing scheme is introduced, enabling a substantially increased output power and an improved performance at zero speed, compared to the conventional NPC VSC. Index Terms--Medium voltage, power losses, three-level converter, voltage-source converter (VSC).
- Published
- 2005
13. A comparison of three-level converters versus two-level converters for low-voltage drives, traction, and utility applications
- Author
-
Teichmann, Ralph and Bernet, Steffen
- Subjects
Electric current converters -- Research ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper evaluates three-level topologies as alternatives to two-level topologies in converters for low-voltage applications. Topologies, semiconductor losses, filter aspects, part count, initial cost, and life-cycle cost are compared for a grid interface, a conventional drive application, and a high-speed drive application. Index Terms--Life-cycle cost, multilevel converters, semiconductor losses.
- Published
- 2005
14. Evaluation of three-level rectifiers for low-voltage utility applications
- Author
-
Teichmann, Ralph, Malinowski, Mariusz, and Bernet, Steffen
- Subjects
Industrial electronics -- Research ,Electric current rectifiers -- Research ,Rectifier instruments -- Research ,Electric current converters -- Research ,Electric current converter ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper evaluates the benefits of three-level topologies as alternatives to two-level topologies in low-voltage converters primarily operated in rectifier mode. The main evaluation aspects are input filter size, semiconductor losses, maximum switching frequency, part count, initial cost, and life cycle cost. Semiconductor loss characteristics of various three-level topologies are discussed. A detailed converter comparison is based on a 100-kW 400-[V.sub.rms] rectifier using commercially available Si insulated gate bipolar transistor modules. Index Terms--Filter, losses, multilevel converter, rectifier.
- Published
- 2005
15. High-frequency modeling for cable and induction motor overvoltage studies in long cable drives
- Author
-
Moreira, Alessandro F., Lipo, Thomas A., Venkataramanan, Giri, and Bernet, Steffen
- Subjects
Variable speed drives -- Testing ,Electric driving, Variable speed ,Overvoltage -- Models ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
High-frequency simulation models for power cables and motors are key tools to aid a better understanding of the overvoltage problem in pulsewidth modulation drives with long feeders. In this paper, frequency responses of the cable characteristic and the motor input impedances are obtained experimentally and suitable models are developed to match the experimental results. Several lumped segments incorporating a lossy representation of the line are used to model the cable. The cable and induction motor models may be implemented using a computational tool such as MATLAB, thereby providing a convenient method to analyze the overvoltage phenomena. Simulation and experimental results are presented for a typical 3-bp induction motor, showing the suitability of the developed simulation models. The most promising dv/dt filter networks are also investigated through simulation analysis, and a design approach based on a tradeoff between filter losses and motor peak voltage is proposed. Experimental results of an RC filter placed at the motor terminals demonstrate the validity of the simulation models. Index Terms--Adjustable-speed drives, converter machine interactions.
- Published
- 2002
16. Design and loss comparison of matrix converters and voltage-source converters for modern AC drives
- Author
-
Bernet, Steffen, Ponnaluri, Srinivas, and Teichmann, Ralph
- Subjects
Power electronics -- Research ,Electric current converters -- Research ,Semiconductors -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper compares a matrix converter (MC) and a dc-voltage link converter with an active front end for a 7.5-kW, 460-V induction motor drive. Part count, semiconductor losses, input filter design, and protection aspects are discussed. It is shown that the matrix converter's semiconductor losses are smaller only at full load operation for the same silicon area in both converters. A 33 % reduction of the device current rating of the MC is possible, resulting in comparable thermal device stress. The overall passive component count and rating is only slightly better for the MC. Index Terms--AC motor drives, input filter design, matrix converter, semiconductor losses, voltage-source converter.
- Published
- 2002
17. Comparison of high-power IGBT's and hard-driven GTO's for high-power inverters
- Author
-
Bernet, Steffen, Teichmann, Ralph, Zuckerberger, Adrian, and Steimer, Peter K.
- Subjects
Bipolar transistors -- Analysis ,Thyristors -- Analysis ,Electric inverters -- Analysis ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper compares hard-driven gate-turn-off thyristors (IGCT's) and high-power insulated gate bipolar transistor (IGBT) modules in a two-level pulsewidth modulation inverter. The structure, fundamental operation, and specific characteristics of the considered devices are shown. Simulations enable a loss comparison of IGCT's and IGBT's in a 1.14-MVA inverter at switching frequencies of [f.sub.s] = 2.50 Hz/500 Hz. The evaluation of device characteristics is the basis for a derivation of potential applications. Index Terms - Hard-driven gate-turn-off thyristor, insulated gate bipolar transistor, losses, pulsewidth modulation inverter.
- Published
- 1999
18. Comparison of 1700-V SiC-MOSFET and Si-IGBT Modules Under Identical Test Setup Conditions.
- Author
-
Fuentes, Carlos D., Kouro, Samir, and Bernet, Steffen
- Subjects
METAL oxide semiconductor field-effect transistors ,SILICON carbide ,ELECTRIC inductance ,BIPOLAR transistors - Abstract
In this article, a detailed hard switching behavior comparison between a 1700-V silicon carbide metal-oxide-semiconductor field-effect-transistor and a 1700-V silicon insulated-gate bipolar-transistor module was performed in an identical low inductance commutation circuit for comparable driving conditions. To accomplish this, devices using same module formats were used and carefully selected to match thermal characteristics in the exact same commutation circuit. Furthermore, a simulation of the modules in inverter operation based on the experimental results and complimented by datasheet based on-state values and Foster thermal models has been performed to study losses, junction temperatures, and current utilization. These results are further discussed highlighting advantages and limitations regarding these state-of-the-art SiC devices versus relative cost when contrasted with a comparable Si-based device. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
19. Input Filter for a Power Electronics Transformer in a Railway Traction Application.
- Author
-
Aceiton, Roberto, Weber, Jens, and Bernet, Steffen
- Subjects
SEMICONDUCTORS ,ENERGY conversion ,HARMONIC suppression filters ,ELECTRIC inductors ,RAILROADS ,PROPULSION systems - Abstract
The need for lighter and smaller railway traction drives and recent advances in power semiconductor technology have resulted in a new energy conversion paradigm, one without the classical heavy and bulky line-frequency transformer. Several multilevel topologies have been introduced over the past years, all having in common the use of medium-frequency (MF) energy conversion to reduce the weight and volume of the magnetic components. This paper is concerned with the design of the input filter for an MF traction converter, focusing on a solution that minimizes the filter's overall mass. Two filter topologies are investigated, namely a single-pole filter (inductor) and a passively damped $LCL$ filter. The paper first describes the requirements to be fulfilled, establishes the spectrum to consider for the design, and proposes a method to determine the initial parameters of the filter's components. The results show that an $LCL$ -type filter achieves considerable weight savings in comparison to the single-pole solution. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
20. Investigation of a High-Power Three-Level Quasi-Resonant DC-Link Voltage-Source Inverter
- Author
-
Bruckner, Thomas and Bernet, Steffen
- Subjects
Electric inverters -- Research ,Thyristors -- Usage ,Electric current converters -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper investigates the feasibility of a quasi-resonant dc-link soft-switching principle for voltage-source inverters (VSIs) in the megawatt power range. An evaluation of a three-level quasi-resonant dc-link VSI (3L-QRDCLVSI) featuring integrated gate-commutated thyristors (IGCTs) and a comparison to a commercially available three-level IGCT-VSI is presented. Extensive loss measurements of IGCTs under hard- and soft-switching conditions are the basis for the design and the comparison of the inverters. Aside from converter losses, other important aspects such as control, protection, and reliability are addressed. Index Terms--Integrated gate-commutated thyristor, pulsewidth modulation converter, soft switching, three-level converter.
- Published
- 2001
21. Recent Developments of High Power Converters for Industry and Traction Applications
- Author
-
Bernet, Steffen
- Subjects
Bipolar transistors -- Usage ,Power semiconductor devices -- Design and construction ,Thyristors -- Usage ,Pulse-duration modulation -- Equipment and supplies ,Business ,Electronics ,Electronics and electrical industries - Abstract
The introduction of new high power devices like integrated gate commutated thyristors (IGCTs) and high voltage insulated gate bipolar transistors (IGBTs) accelerates the broad use of pulse width modulation (PWM) voltage source converters in industrial and traction applications. This paper summarizes the state-of-the-art of power semiconductors. The characteristics of IGCTs and high voltage IGBTs are described in detail. Both the design and loss simulations of a two level 1.14 MVA voltage source inverter and a 6 MVA three-level neutral point clamped voltage source converter with active front end enable a detailed comparison of both power semiconductors for high power PWM converters. The design and the characteristics of a commercially available IGCT neutral point clamped PWM voltage source converter for medium voltage drives are discussed. Recent developments and trends of traction converters at dc mains and ac mains are summarized. Index Terms--Insulated gate bipolar transistor, integrated gate commutated thyristor, power semiconductor, pulse width modulated inverter, traction converter.
- Published
- 2000
22. Selective Harmonic Elimination Model Predictive Control for Multilevel Power Converters.
- Author
-
Aguilera, Ricardo P., Acuna, Pablo, Lezana, Pablo, Konstantinou, Georgios, Wu, Bin, Bernet, Steffen, and Agelidis, Vassilios G.
- Subjects
CONVERTERS (Electronics) ,HARMONIC analysis (Mathematics) ,PULSE modulation ,STEADY state conduction ,COST functions - Abstract
In this study, a model predictive control (MPC) strategy that combines finite-control-set MPC with selective harmonic elimination (SHE) modulation pattern in its formulation is proposed to govern multilevel power converters. Based on a desired operating point for the system state (converter current reference), an associated predefined SHE voltage pattern is obtained as a required steady-state control input reference. Then, the cost function is formulated with the inclusion of both system state and control input references. According with the proposed reference and cost function formulation, the predictive controller prefers to track the converter output current reference in transients, while preserving the SHE voltage pattern in steady state. Hence, as evidenced by experimental results, a fast dynamic response is obtained throughout transients while a predefined voltage and current spectrum with low switching frequency is achieved in steady state. [ABSTRACT FROM PUBLISHER]
- Published
- 2017
- Full Text
- View/download PDF
23. Control of Arm Capacitor Voltages in Modular Multilevel Converters.
- Author
-
Lizana, Ricardo, Perez, Marcelo A., Bernet, Steffen, Espinoza, Jose R., and Rodriguez, Jose
- Subjects
CAPACITORS ,VOLTAGE control ,CONVERTERS (Electronics) ,INTEGRATED circuits ,PHOTOVOLTAIC power generation ,MATHEMATICAL models - Abstract
Modular multilevel converters have several attractive features such as a modular structure, high voltage capability and scalability, excellent quality of the output voltage waveforms, as well as, low expense for redundancy. However, the main drawback of this converter is the complexity of the control system due to the multiple control objectives which include the input, output, circulating current and the capacitor voltages. Several control schemes for the capacitor voltages have been proposed, being usually divided into the control of the average voltage and the balancing of the capacitor voltages among the submodules and among the arms. These control schemes can effectively control the capacitor voltage when the reference is the same for all arms, but they cannot manage arbitrary voltage references when each arm capacitor voltage must be controlled independently as required, for example, to achieve maximum power point tracking in photovoltaic applications. This paper proposes a control strategy for a modular multilevel converter capable to manage the average capacitor voltage of each arm independently. The proposed scheme is based on a decomposition of the energy of the arms in different components, according to theirs symmetries. Results validating the performance of the proposed control scheme are shown and the impact on the output current is also discussed. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
24. Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters.
- Author
-
Perez, Marcelo A., Bernet, Steffen, Rodriguez, Jose, Kouro, Samir, and Lizana, Ricardo
- Subjects
- *
ELECTRIC circuits , *CASCADE converters , *ELECTRIC transformers , *ELECTRIC capacity , *ELECTRONIC modulation , *ELECTRIC fault location - Abstract
Modular multilevel converters have several attractive features such as a modular structure, the capability of transformer-less operation, easy scalability in terms of voltage and current, low expense for redundancy and fault tolerant operation, high availability, utilization of standard components, and excellent quality of the output waveforms. These features have increased the interest of industry and research in this topology, resulting in the development of new circuit configurations, converter models, control schemes, and modulation strategies. This paper presents a review of the latest achievements of modular multilevel converters regarding the mentioned research topics, new applications, and future trends. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
25. A New Modular Flux-Switching Permanent-Magnet Drive for Large Wind Turbines.
- Author
-
Ditmanson, Chester, Hein, Peter, Kolb, Stefan, Molck, Joaquin, and Bernet, Steffen
- Subjects
PERMANENT magnet motors ,ELECTRIC windings ,ELECTRIC motors ,WIND turbines ,HARMONIC suppression filters ,PULSE width modulation transformers ,MOTOR design & construction - Abstract
A new modular drivetrain for large wind turbines currently under development is presented. The electromechanicaldrivetrain has a direct-drive configuration with a modular flux-switching permanent-magnet generator. The full-powerconverter consists of 12 parallel back-to-back two-level voltage source converter modules. A novel method of modulationis used to improve harmonic quality while maintaining a low switching frequency. Benefits of the new design includesimplified manufacturing and transport, increased system availability due to fault tolerance and redundance, andavoidance of an LCL filter. Measurement results are shown from a 500-kW test rig. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
26. Discrete-Time Active Damping of $LC\!L$-Resonance by Proportional Capacitor Current Feedback.
- Author
-
Wagner, Martin, Barth, Tobias, Alvarez, Rodrigo, Ditmanson, Chester, and Bernet, Steffen
- Subjects
POWER supply quality ,DISCRETE-time systems ,ELECTRIC power distribution grids ,PULSE width modulation transformers ,HARMONIC suppression filters ,CLOSED loop systems ,MATHEMATICAL optimization ,DAMPING capacity - Abstract
In order to fulfill the grid codes and meet power quality requirements in grid-connected converters without increasing the switching frequency or system size, higher order line filters are often used. This paper considers the active damping of $LC\!L$-filters in grid-connected converters. Analysis in the discrete time domain shows that the damping can be increased when proportional plus derivative control of the capacitor current is applied, and it is found that this scheme has a simple implementation in a discrete time system as it is equivalent to proportional feedback of the last two samples. To find optimal damping controller gains, an analytical solution is derived for the open-loop system, and for the closed-loop system, a numerical optimization algorithm is developed. The performance of the proposed methods is compared using analysis in the $z$-domain, simulations, and experimental investigation. The analytical solution has good damping, an easy implementation, and is seen to have robustness against parameter variation, whereas the numerical solution is computation intensive but has even higher damping. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
27. Evaluation of 6.5-kV SiC p-i-n Diodes in a Medium-Voltage, High-Power 3L-NPC Converter.
- Author
-
Filsecker, Felipe, Alvarez, Rodrigo, and Bernet, Steffen
- Subjects
SILICON carbide ,CASCADE converters ,DIODES ,SEMICONDUCTORS ,IDEAL sources (Electric circuits) ,PROTOTYPES - Abstract
This study is focused on evaluating the advantages of 6.5-kV SiC p-i-n diodes in a 4.16-kV, 8-MVA neutral point clamped (NPC) voltage source converter. Electrothermal models of the power semiconductors are elaborated based on measurement data of a SiC diode module prototype, as well as of commercial Si devices. These models are integrated into a converter simulation, where the junction temperatures of each device are used to determine the maximum power output under different device configurations. For the analysis, a parallel connection of two 6.5-kV insulated-gate bipolar transistors (IGBTs) as well as a series connection of two 3.3-kV IGBTs are considered as switches. The influence of the current change rate during the IGBT turn-on is also studied. SiC p-i-n diodes are used as a replacement for the NPC diodes of the converter and as antiparallel diodes in IGBT modules. The results obtained indicate that an increase in the output power of 17% can be achieved using SiC NPC diodes for the studied current change rates. Alternatively, for a constant output power, the switching frequency of the converter can be increased by 69%, reducing the converter size and system costs by the use of smaller filters. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
28. Sinusoidal Current Operation of Delay-Time Compensation for Parallel-Connected IGBTs.
- Author
-
Alvarez, Rodrigo and Bernet, Steffen
- Subjects
- *
INSULATED gate bipolar transistors , *VOLTAGE-frequency converters , *ELECTRIC current measurement , *TIME delay estimation , *LOGIC circuits - Abstract
The parallel connection of IGBTs is being applied in various low- and medium-voltage converters. The selection of the devices, the manual parametrization of gate units, and the substantial device derating are substantial disadvantages of state-of-the-art converters with parallel-connected insulated-gate bipolar transistors (IGBTs). A new, low-expensive, and automated delay-time compensation method without additional current measurements was introduced in the 2011 IEEE Energy Conversion Congress and Exposition. This paper briefly reviews the structure and function of this new scheme, shows the extension of the scheme for three parallel-connected IGBTs, and investigates the performance of the new delay-time compensation principle for sinusoidal current operation at different $\cos\phi$ and m_{a} values, as in a converter for drives. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
29. The Investigation of a 6.5-kV, 1-kA SiC Diode Module for Medium Voltage Converters.
- Author
-
Filsecker, Felipe, Alvarez, Rodrigo, and Bernet, Steffen
- Subjects
VOLTAGE-frequency converters ,SILICON carbide ,DIODES ,TEMPERATURE effect ,WIDE gap semiconductors ,PIN diodes - Abstract
This paper introduces a 6.5-kV 1-kA SiC PiN diode module for megawatt-range medium voltage converters. The analysis comprises a short description of the die and module technology and a device characterization. The effects of di/dt and temperature variation, as well as parasitic oscillations are discussed. A comparison of the results with a commercial Si diode (6.5 kV and 1.2 kA) is included. In the last section, an estimation of maximum converter output power, maximum switching frequency, losses and efficiency in a 3L-NPC converter operating with SiC and Si diodes is presented. The analyzed diode module exhibits a very good performance regarding switching loss reduction, which allows an increase of at least 16% in the output power of a 6-MVA converter. Alternatively, the switching frequency can be increased by 46%. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
30. Submodule Capacitor Dimensioning for Modular Multilevel Converters.
- Author
-
Barnklau, Hans, Gensior, Albrecht, and Bernet, Steffen
- Subjects
CAPACITORS ,MATHEMATICAL analysis ,MULTIDISCIPLINARY design optimization ,ELECTRIC switchgear ,CONVERTERS (Electronics) - Abstract
This paper deals with the dimensioning of the capacitors in modular multilevel converters based on analytical equations. Considered design parameters are the (periodic) energy fluctuation, the admissible ripple voltage, and the demand in control reserve. Design examples complete this paper. [ABSTRACT FROM PUBLISHER]
- Published
- 2014
- Full Text
- View/download PDF
31. Switching Loss Analysis of 4.5-kV–5.5-kA IGCTs Within a 3L-ANPC Phase Leg Prototype.
- Author
-
Andler, Daniel, Alvarez, Rodrigo, Bernet, Steffen, and Rodriguez, Jose
- Subjects
SWITCHING circuits ,PROTOTYPES ,CLAMPING circuits ,IDEAL sources (Electric circuits) ,ELECTRIC current converters - Abstract
Three-level active neutral-point-clamped (NPC) (3L-ANPC) voltage-source converters (3L-ANPC-VSCs) enable additional switch states and commutations compared to the three-level NPC voltage-source converters (3L-NPC-VSCs). They are used to overcome one important disadvantage of the 3L-NPC-VSC, the unequal semiconductor loss distribution. With an accurate switching model (obtained directly from the measurements), it is possible to improve the junction temperature distribution among the power devices, increasing the 3L-ANPC-VSC output power and/or increasing the frequency and/or decreasing the derating of the converter. This paper presents the characterization of a 4.5-kV–5.5-kA integrated gate-commutated thyristor (IGCT) within a 3L-ANPC phase leg. A quantitative analysis of the switching losses using 5SHY55L4500 IGCTs and D1961SH45T press-pack diodes for a current range from 1 to 4.5 kA and junction temperatures between 25 ^\circ \C and 125 ^\circ \C is presented. The 3L-ANPC phase leg performs 32 different commutations. Each commutation exhibits different switching losses, as a result of the different commutation paths and their stray inductances. This switching energy range is presented and quantified. Finally, a simplified switching loss model considering the maximal switching losses in terms of the commutation current and the junction temperature is presented. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
32. Experimental Investigation of the Commutations of a 3L-ANPC Phase Leg Using 4.5-kV–5.5-kA IGCTs.
- Author
-
Andler, Daniel, Alvarez, Rodrigo, Bernet, Steffen, and Rodriguez, Jose
- Subjects
COMMUTATION (Electricity) ,ELECTRIC brushes ,THYRISTORS ,ELECTRIC current rectifiers ,ELECTRIC current converters - Abstract
Three-level active neutral-point-clamped (NPC) (ANPC) (3L-ANPC) voltage-source converters (3L-ANPC VSCs) offer three additional switch states and an increase of commutations by a factor of four, compared to the three-level NPC voltage-source converter. This paper presents, for the first time, a detailed analysis of all 3L-ANPC VSC commutations using high-power 5SHY55L4500 integrated gate-commutated thyristors. Starting with a description of the switching states and commutations, a new 3-kV 5-kA medium-voltage 3L-ANPC testbench is described. To verify the function of all commutations, this paper derives suitable switching sequences and analyzes the commutations and switching transients in detail for dc-link voltages of 2.13–2.43 kV and load currents of 3.95–4.36 kA. The experimental investigations show that, although the ANPC commutations substantially differ from NPC commutations, the ANPC commutations do not present critical operating conditions for the power semiconductors or the converters. Thus, all 32 ANPC commutations can be applied in a new medium-voltage converter realization. [ABSTRACT FROM PUBLISHER]
- Published
- 2013
- Full Text
- View/download PDF
33. Comparison of 4.5-kV Press-Pack IGBTs and IGCTs for Medium-Voltage Converters.
- Author
-
Filsecker, Felipe, Alvarez, Rodrigo, and Bernet, Steffen
- Subjects
CONVERTERS (Electronics) ,BIPOLAR transistors ,THYRISTORS ,SEMICONDUCTORS ,ENERGY consumption - Abstract
Recently developed insulated-gate bipolar transistor (IGBT) press-pack (PP) devices with a blocking voltage of 4.5 kV are being used in medium-voltage converters as an alternative to integrated gate-commutated thyristors (IGCTs). This paper presents an overview of PP packaging and both semiconductor technologies. A quantitative comparison of these devices is achieved through measurements for a 4.5-kV 1.2-kA IGBT and a 4.5-kV 4-kA IGCT. The laboratory test bench for the switching transient characterization at a dc-link voltage of 2.5 kV and currents up to 3 kA is described. Conduction, blocking, and switching behavior for junction temperatures up to 125 ^\circ\C are investigated. The IGCT and the IGBT are tested using a di/dt-limiting clamp circuit. In addition, the IGBT is tested in hard switching mode. [ABSTRACT FROM PUBLISHER]
- Published
- 2013
- Full Text
- View/download PDF
34. Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters.
- Author
-
Rohner, Steffen, Bernet, Steffen, Hiller, Marc, and Sommer, Rainer
- Subjects
- *
ELECTRONIC modulation , *SEMICONDUCTORS , *CASCADE converters , *ELECTRIC potential , *INDUSTRIAL electronics - Abstract
This paper describes the operation of modular multilevel converter, an emerging and highly attractive topology for medium- and high-voltage applications. A new pulsewidth-modulation (PWM) scheme for an arbitrary number of voltage levels is introduced and evaluated. On the basis of this PWM scheme, the semiconductor losses are calculated, and the loss distribution is illustrated. [ABSTRACT FROM AUTHOR]
- Published
- 2010
- Full Text
- View/download PDF
35. A Survey on Neutral-Point-Clamped Inverters.
- Author
-
Rodriguez, Jose, Bernet, Steffen, Steimer, Peter K., and Lizama, Ignacio E.
- Subjects
- *
CLAMPING circuits , *ELECTRIC inverters , *ELECTRONIC modulation , *SEMICONDUCTORS , *CAPACITORS - Abstract
Neutral-point-clamped (NPC) inverters are the most widely used topology of multilevel inverters in high-power applications (several megawatts). This paper presents in a very simple way the basic operation and the most used modulation and control techniques developed to date. Special attention is paid to the loss distribution in semiconductors, and an active NPC inverter is presented to overcome this problem. This paper discusses the main fields of application and presents some technological problems such as capacitor balance and losses. [ABSTRACT FROM AUTHOR]
- Published
- 2010
- Full Text
- View/download PDF
36. Parallel Connection of Integrated Gate Commutated Thyristors (IGCTs) and Diodes.
- Author
-
Hermann, Robert, Bernet, Steffen, Yongsug Suh, and Steimer, Peter K.
- Subjects
- *
THYRISTORS , *DIODES , *SEMICONDUCTORS , *ELECTRIC switchgear , *MAGNETIC coupling - Abstract
This paper describes the parallel connection of 4.5 kV integrated gate commutated thyristors (IGCTs) and diodes. The impact of varying device characteristics on the stationary current distribution of parallel connected semiconductors is investigated. Possible solutions to improve the current sharing at steady state are presented. A thermal stabilization effect of parallel connected IGCTs is discussed. Furthermore, the behavior of parallel connected devices during switching transients is investigated experimentally in a 1.5.kV, 5-kA buck converter. Especially, the impact of asymmetrical circuit layouts, magnetic couplings, different turn-ON and turn-OFF delays, and junction temperatures are considered. It is shown that a substantial current derating is necessary to enable a reliable operation of parallel IGCTs and diodes. [ABSTRACT FROM AUTHOR]
- Published
- 2009
- Full Text
- View/download PDF
37. Current-Source Converter and Cycloconverter Topologies for Industrial Medium-Voltage Drives.
- Author
-
Bin Wu, Pontt, Jorge, Rodriguez, José, Bernet, Steffen, and Kouro, Samir
- Subjects
INDUSTRIAL electronics ,PHOTOVOLTAIC power generation ,PHOTOVOLTAIC power systems ,PHOTOVOLTAIC cells ,SOLAR energy ,SOLAR cells ,ALGORITHMS ,ELECTRONIC controllers ,DC-to-DC converters - Abstract
This paper, along with an earlier published paper as Part 1, provides a comprehensive review of the state of the art of high-power converters (above 1 MW) for adjustable-speed ac drives. In this highly active area, different converter topologies have been developed for various drive applications in the industry. Due to its extensive coverage, the subject is divided into two parts: multilevel voltage source and current source converter topologies. This paper is focused on the second part and covers the current source converter technologies, including pulsewidth-modulated current-source inverters (CSIs) and load-commutated inverters. In addition, this paper also addresses the present status of the direct converter, which is also known as cycloconverter (CCV). This paper focuses on the latest CSI and CCV technologies and an overview of the commonly used modulation schemes. It also provides the latest technological advances and future trends in CSI- and CCV-fed large drives. This paper serves as a useful reference for academic researchers and practicing engineers in the field of power converters and adjustable-speed drives. [ABSTRACT FROM AUTHOR]
- Published
- 2008
- Full Text
- View/download PDF
38. A Simple Voltage Sensorless Active Damping Scheme for Three-Phase PWM Converters With an LCL Filter.
- Author
-
Malinowski, Mariusz and Bernet, Steffen
- Subjects
- *
ELECTRIC potential , *ELECTRIC current rectifiers , *ELECTRIC inductance , *SWITCHING circuits , *ELECTRODYNAMICS , *ELECTRIC inductors , *STABILITY (Mechanics) , *CASCADE converters , *ALGORITHMS - Abstract
Active three-phase pulsewidth-modulated rectifiers are connected to the grid by an inductance or an LCL filter. Although an LCL filter is more effective since it more efficiently attenuates the switching harmonics, it causes stability problems. To enable a stable operation, either a damping resistor or an active damping (AD) algorithm has to be used. However, while a damping resistor causes additional losses, an AD algorithm usually requires extra sensors. To avoid these disadvantages, this paper shows simulation and experimental results of a simple ac voltage sensorless AD solution that is suitable for industrial applications. [ABSTRACT FROM AUTHOR]
- Published
- 2008
- Full Text
- View/download PDF
39. Power Loss-Oriented Evaluation of High Voltage IGBTs and Multilevel Converters in Transformerles s Traction Applications.
- Author
-
Dieckerhoff, Sibylle, Bernet, Steffen, and Krug, Dietmar
- Subjects
- *
INSULATED gate bipolar transistors , *ELECTRIC current converters , *POWER electronics , *BIPOLAR transistors , *ELECTRIC transformers , *POWER transmission - Abstract
The low-frequency line transformer in todays ac rail vehicles suffers from poor efficiency and a substantial weight. Future traction drives may operate directly from the mains without this transformer. A feasible concept for a transformerless drive system consists of series connected medium voltage converters applying modern high-voltage insulated gate bipolar transistors (HV-IGBTs). In a first design step, the switching characteristics and losses of 6.5-ky IGBTs are compared to 3.3-kV and 4.5-kV IGBTs which are already commercially used in traction applications. Based on the considered HIV-IGBTs, the properties of multilevel converters are analyzed and their applicability to the transformerless system is evaluated. The paper focusses on a loss analysis of the converters. Reliability aspects and harmonic spectra are briefly discussed. Taking these design aspects into account, the three-level neutral point clamped converter turns out to be a reasonable solution to realize line and motor converter modules in a transformerless traction system. [ABSTRACT FROM AUTHOR]
- Published
- 2005
- Full Text
- View/download PDF
40. SiC-MOSFET or Si-IGBT: Comparison of Design and Key Characteristics of a 690 V Grid-Tied Industrial Two-Level Voltage Source Converter.
- Author
-
Fuentes, Carlos D., Müller, Marcus, Bernet, Steffen, and Kouro, Samir
- Subjects
VOLTAGE-frequency converters ,IDEAL sources (Electric circuits) ,METAL oxide semiconductor field-effect transistors ,COST control ,SILICON carbide ,CONVERTERS (Electronics) - Abstract
In this paper, a design driven comparison between two 190 kVA industrial three-phase two-level voltage source converter (2L-VSC) designs based in silicon carbide (SiC) and silicon (Si) for 690 V grids is presented. These two designs were conceived to have the same nominal power, while switching at reasonable switching speeds and requiring the same case to ambient thermal impedance. Under these conditions, the designs were studied to detect the potential gains and limitations that a pragmatic converter design could feature when using these two technologies regarding cost, efficiency, size and weight. To achieve this, experimentally determined semiconductor characteristics were used to perform simulations, the results of which were then used to design the essential parts of the converter. These designed parts were then corroborated with manufacturers, from which physical characteristics of all designed components were obtained. The results show that the SiC based design presents substantial weight savings and an 11% system cost reduction, while preserving its traditional characteristics such as improved overall efficiency when compared to the silicon based design under the given design requirements and constraints. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
41. Editorial Special Issue on Modular Multilevel Converters, 2015.
- Author
-
Perez, Marcelo A., Bernet, Steffen, Rodriguez, Jose, and Kouro, Samir
- Subjects
- *
CASCADE converters , *ELECTRIC circuits , *ELECTRONIC modulation , *HIGH-voltage direct current transmission , *EDITORIAL boards - Abstract
The articles in this special issue focus on the latest achievements of modular multilevel converters regarding the development of new circuit configurations, converter models, modulation strategies, and control schemes. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
42. Modeling and simulation of matrix converter/induction motor drive
- Author
-
Matsuo, Takayoshi, Bernet, Steffen, Colby, R.Stephen, and Lipo, Thomas A.
- Published
- 1998
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.