Search

Nanoparticles composed of inorganic boron-containing compounds represent a promising candidate as 10B carriers for BNCT. This study focuses on the synthesis, characterization, and assessment of the biological activity of composite nanomaterials based on boron carbide (B4C). Boron carbide is a compelling alternative to borated molecules due to its high volumetric B content, prolonged retention in biological systems, and low toxicity. These attributes lead to a substantial accumulation of B in tissues, eliminating the need for isotopically enriched compounds. In our approach, B4C nanoparticles were included in composite nanostructures with ultrasmall superparamagnetic nanoparticles (SPIONs), coated with poly (acrylic acid), and further functionalized with the fluorophore DiI. The successful internalization of these nanoparticles in HeLa cells was confirmed, and a significant uptake of 10B was observed. Micro-distribution studies were conducted using intracellular neutron autoradiography, providing valuable insights into the spatial distribution of the nanoparticles within cells. These findings strongly indicate that the developed nanomaterials hold significant promise as effective carriers for 10B in BNCT, showcasing their potential for advancing cancer treatment methodologies. [ABSTRACT FROM AUTHOR]

Boron-Neutron Capture Therapy (BNCT) is a tumor-selective radiotherapy, based on the nuclear capture reaction 10B(n,α)7Li producing short range α-particles and recoiling 7Li nuclei exclusively confined to boron-enriched cancer cells. These particles possess high Linear Energy Transfer (LET) and mainly generate clustered DNA strand breaks, which are less faithfully restored by intracellular repair. Mis-rejoined breaks yield chromosome aberrations (CAs), which, for high-LET radiation, are more complex in nature than after sparsely ionizing photons/electrons used in conventional radiotherapy, which leads to increased cell-killing ability. However, such a radiobiological tenet of BNCT has been scantily studied at the DNA level. Therefore, the aim of this work was to evaluate CAs induced by BNCT in comparison to X-rays in genomically stable normal human epithelial mammary MCF10A cells. Two Fluorescence In Situ Hybridization (FISH)-based techniques were applied to calyculin A-induced prematurely condensed chromosomes: Whole Chromosome Painting and multicolor(m)-FISH. Not only did BNCT induce a greater CA frequency than X-ray irradiation, but m-FISH karyotype-wide analysis confirmed that CAs following BNCT exhibited a much higher degree of complexity compared to X-rays. To our knowledge, this is the first time that such evidence supporting the radiobiological superiority of BNCT has been shown. [ABSTRACT FROM AUTHOR]

New multifunctional theranostic vectors allow the expansion of cancer therapeutic approaches toward scarcely investigated fields. One example is the combination of boron neutron capture therapy (BNCT) and X‐ray radiotherapy (XRT) for treating normal and XRT‐resistant hypoxic tumor regions and reduce recurrence. Of great relevance for BNCT is also the support of viable, rapid, safe, and reliable techniques for the localization and quantification of the radiosensitizers in the tissues. To address these challenges, polymer‐coated Au‐B nanoparticles (NPs) are obtained starting from a laser ablation in liquid process. Despite thermodynamic constraints, the two elements coexist by short‐range boron segregation in the gold lattice, as demonstrated experimentally and explained with the support of density functional theory calculations. Thus, the Au‐B NPs maintain a marked gold character such as biocompatibility, stability, and straightforward surface chemistry with thiolated compounds, desirable for the integration with agents capable of cell targeting and internalization. Overall, the Au‐B NPs exhibit the appropriate features for the investigation of combined BNCT and XRT, supported by the localization and quantification with X‐ray computed tomography imaging. Besides, the Au‐B nanotechnology tool is achievable without renouncing to reproducibility, environmental sustainability, and cost affordability thanks to the laser‐assisted synthetic pathway. [ABSTRACT FROM AUTHOR]

Osteosarcoma is the most frequently primary malignant bone tumor characterized by infiltrative growth responsible for relapses and metastases. Treatment options are limited, and a new therapeutic option is required. Boron neutron capture therapy (BNCT) is an experimental alternative radiotherapy able to kill infiltrative tumor cells spearing surrounding healthy tissues. BNCT studies are performed on 2D in vitro models that are not able to reproduce pathological tumor tissue organization or on in vivo animal models that are expensive, time‐consuming and must follow the 3R's principles. A 3D in vitro model is a solution to better recapitulate the complexity of solid tumors meanwhile limiting the animal's use. Objective of this study is to optimize the technical assessment for developing a 3D in vitro osteosarcoma model as a platform for BNCT studies: printing protocol, biomaterial selection, cell density, and crosslinking process. The best parameters that allow a fully colonized 3D bioprinted construct by rat osteosarcoma cell line UMR‐106 are 6 × 106 cells/ml of hydrogel and 1% CaCl2 as a crosslinking agent. The proposed model could be an alternative or a parallel approach to 2D in vitro culture and in vivo animal models for BNCT experimental study. [ABSTRACT FROM AUTHOR]

Inorganic nanoparticles of boron-rich compounds represent an attractive alternative to boron-containing molecules, such as boronophenylalanine or boranes, for BNCT applications. This work describes the synthesis and biological activity of multifunctional boron carbide nanoparticles stabilized with polyacrylic acid (PAA) and a gadolinium (Gd)-rich solid phase. A fluorophore (DiI) was included in the PAA functionalization, allowing the confocal microscopy imaging of the nanoparticles. Analysis of the interaction and activity of these fluorescent Gd-containing B4C nanoparticles (FGdBNPs) with cultured cells was appraised using an innovative correlative microscopy approach combining intracellular neutron autoradiography, confocal, and SEM imaging. This new approach allows visualizing the cells, the FGdBNP, and the events deriving from the nuclear process in the same image. Quantification of 10B by neutron autoradiography in cells treated with FGdBNPs confirmed a significant accumulation of NPs with low levels of cellular toxicity. These results suggest that these NPs might represent a valuable tool for achieving a high boron concentration in tumoral cells. [ABSTRACT FROM AUTHOR]

Boron neutron capture therapy (BNCT) is a treatment modality for cancer that involves radiations of different qualities. A formalism that proved suitable to compute doses in photon-equivalent units is the photon isoeffective dose model. This study addresses the question whether considering in vitro or in vivo radiobiological studies to determine the parameters involved in photon isoeffective dose calculations affects the consistency of the model predictions. The analysis is focused on head and neck squamous cell carcinomas (HNSCC), a main target that proved to respond to BNCT. The photon isoeffective dose model for HNSCC with parameters from in vitro studies using the primary human cell line UT-SCC-16A was introduced and compared to the one previously reported with parameters from an in vivo oral cancer model in rodents. Both models were first compared in a simple scenario by means of tumor dose and control probability calculations. Then, the clinical impact of the different dose models was assessed from the analysis of a group of squamous cell carcinomas (SCC) patients treated with BNCT. Traditional dose calculations using the relative biological effectiveness factors derived from the SCC cell line were also analyzed. Predictions of tumor control from the evaluated models were compared to the patients' outcome. The quantification of the biological effectiveness of the different radiations revealed that relative biological effectiveness/compound biological effectiveness (RBE/CBE) factors for the SCC cell line are up to 20% higher than those assumed in clinical BNCT, highlighting the importance of using experimental data intimately linked to the tumor type to derive the model's parameters. The comparison of the different models showed that photon isoeffective doses based on in vitro data are generally greater than those from in vivo data (∼8–16% for total tumor absorbed doses of 10–15 Gy). However, the predictive power of the two models was not affected by these differences: both models fulfilled conditions to guarantee a good predictive performance and gave predictions statistically compatible with the clinical outcome. On the other hand, doses computed with the traditional model were substantially larger than those obtained with both photon isoeffective models. Moreover, the traditional model is statistically rejected, which reinforces the assertion that its inconsistencies are intrinsic and not due to the use of RBE/CBE factors obtained for a tumor type different from HN cancer. The results suggest that the nature of the radiobiological data would not affect the consistency of the photon isoeffective dose model in the studied cases of SCC head and neck cancer treated with BPA-based BNCT. [ABSTRACT FROM AUTHOR]

This paper aims to investigate how the spatial distribution of boron in cells and oxygen concentration affect the DNA damage induced by charged particles in boron neutron capture therapy (BNCT) by Monte Carlo simulations, and further to evaluate the relative biological effectiveness (RBE) of DNA double-strand breaks (DSBs) induction. The kinetic energy spectra of α, 7Li particles in BNCT arriving at the nucleus surface were obtained from GEANT4 (Geant4 10.05.p01). The DNA damage caused by BNCT was then evaluated using MCDS (MCDS 3.10A). When α or 7Li particles were distributed in the cytomembrane or cytoplasm, the difference in DNA damage of the same types was less than 0.5%. Taking the 137Cs photons as the reference radiation, when the oxygen concentration varied from 0% to 50%, the RBE of 0.54MeV protons and recoil protons varied from 5 to 2, whereas it decreased from 10 to 3 for α or 7Li particles. The RBE of DSB induction all charged particles in BNCT decreased with the increase of oxygen concentration. This work indicated that the RBE of different radiation particles of BNCT might be affected by many factors, which should be paid attention to in theoretical research or clinical application. [ABSTRACT FROM AUTHOR]

Osteosarcoma is the most common primary malignant tumour of bone in young patients. The survival of these patients has largely been improved due to adjuvant and neo-adjuvant chemotherapy in addition to surgery. Boron neutron capture therapy (BNCT) is proposed as a complementary therapy, due to its ability to inactivate tumour cells that may survive the standard treatment and that may be responsible for recurrences and/or metastases. BNCT is based on neutron irradiation of a tumour enriched in 10B with a boron-loaded drug. Low-energy neutron capture in 10B creates charged particles that impart a high dose to tumour cells, which can be calculated only knowing the boron concentration. Charged particle spectrometry is a method that can be used to quantify boron concentration. This method requires acquisition of the energy spectra of charged particles such as alpha particles produced by neutron capture reactions in thin tissue sections irradiated with low-energy neutrons. Boron concentration is then determined knowing the stopping power of the alpha particles in the sample material. This paper describes the adaptation of this method for bone, with emphasis on sample preparation, experimental set-up and stopping power assessment of the involved alpha particles. The knowledge of boron concentration in healthy bones is important, because it allows for any dose limitation that might be necessary to avoid adverse effects such as bone fragility. The measurement process was studied through Monte Carlo simulations and analytical calculations. Finally, the boron content of bone samples was measured by alpha spectrometry at the TRIGA reactor in Pavia, Italy, and compared to that obtained by neutron autoradiography. The agreement between the results obtained with these techniques confirms the suitability of alpha spectrometry to measure boron in bone. [ABSTRACT FROM AUTHOR]

Purpose: Boron neutron capture therapy (BNCT) combines selective accumulation of 10B carriers in tumor tissue with subsequent neutron irradiation. BNCT has been proposed for the treatment of multiple, non-resectable, diffuse tumors in lung. The aim of the present study was to evaluate the therapeutic efficacy and toxicity of BNCT in an experimental model of lung metastases of colon carcinoma in BDIX rats and perform complementary survival studies. Materials and methods: We evaluated tumor control and toxicity in lung 2 weeks post-BNCT at 2 dose levels, including 5 experimental groups per dose level: T0 (euthanized pre-treatment), Boronophenylalanine-BNCT (BPA-BNCT), BPA + Sodium decahydrodecaborate-BNCT ((BPA + GB-10)-BNCT), Beam only (BO) and Sham (no treatment, same manipulation). Tumor response was assessed employing macroscopic and microscopic end-points. An additional experiment was performed to evaluate survival and oxygen saturation in blood. Results and conclusions: No dose-limiting signs of short/medium-term toxicity were observed in lung. All end-points revealed statistically significant BNCT-induced tumor control vs Sham at both dose levels. The survival experiment showed a statistically significant 45% increase in post-treatment survival time in the BNCT group (48 days) versus Sham (33 days). These data consistently revealed growth suppression of lung metastases by BNCT with no manifest lung toxicity. Boron Neutron Capture Therapy suppresses growth of experimental lung metastases No BNCT-induced short/medium-term toxicity in lung is associated with tumor control Boron Neutron Capture Therapy increased post-treatment survival time by 45% [ABSTRACT FROM AUTHOR]

Boronated molecular systems can be applied to boron neutron capture therapy (BNCT). Among these systems, carborane‐containing phthalocyanines (Pcs) are the most promising BNCT agents. Herein we report the new zinc (II) complex of the hexacationic Pc 6, which has been obtained as iodide salt through quaternization of the neutral precursor with methyl iodide. Compound 6 was synthesized over a sequence of four steps. The complex, and its precursors as well, were characterized by a combination of spectroscopic techniques, and their structures assessed by 1H, 13C, 11B, and two‐dimensional NMR spectroscopy experiments. Together with a marked tendency to aggregate, 6 showed appreciable solubility in water. Singlet oxygen quantum yield (ΦΔ) of 0.38, and fluorescence quantum yield (ΦF) of 0.13 were obtained for 6 in a DMF solution. The complex proved to be very effective in enriching UMR‐106 cells with 10B, showing very good performance even in case of very low concentrations exposure, i. e. 1 ppm, that moreover resulted in a mild cytotoxic effect. Such a feature can be related to the polycationic nature of the complex, and hence to the well‐known propensity of positively charged species to enter the cellular membrane or to adhere to its external surface. [ABSTRACT FROM AUTHOR]

Background: Osteosarcoma is the most frequent primary malignant bone tumour, and its incidence is higher in children and adolescents, for whom it represents more than 10% of solid cancers. Despite the introduction of adjuvant and neo-adjuvant chemotherapy that markedly increased the success rate in the treatment, aggressive surgery is still needed and a considerable percentage of patients do not survive due to recurrences or early metastases. Boron Neutron Capture Therapy (BNCT), an experimental radiotherapy, was investigated as a treatment that could allow a less aggressive surgery by killing infiltrated tumour cells in the surrounding healthy tissues. BNCT requires an intense neutron beam to ensure irradiation times of the order of 1 h. In Italy, a Radio Frequency Quadrupole (RFQ) proton accelerator has been designed and constructed for BNCT, and a suitable neutron spectrum was tailored by means of Monte Carlo calculations. This paper explores the feasibility of BNCT to treat osteosarcoma using this neutron source based on accelerator.Methods: The therapeutic efficacy of BNCT was analysed evaluating the dose distribution obtained in a clinical case of femur osteosarcoma. Mixed field dosimetry was assessed with two different formalisms whose parameters were specifically derived from radiobiological experiments involving in vitro UMR-106 osteosarcoma cell survival assays and boron concentration assessments in an animal model of osteosarcoma. A clinical case of skull osteosarcoma treated with BNCT in Japan was re-evaluated from the point of view of dose calculation and used as a reference for comparison.Results: The results in the case of femur osteosarcoma show that the RFQ beam would ensure a suitable tumour dose painting in a total irradiation time of less than an hour. Comparing the dosimetry between the analysed case and the treated patient in Japan it turns out that doses obtained in the femur tumour are at least as good as the ones delivered in the skull osteosarcoma. The same is concluded when the comparison is carried out taking into account osteosarcoma irradiations with photon radiation therapy.Conclusions: The possibility to apply BNCT to osteosarcoma would allow a multimodal treatment consisting in neo-adjuvant chemotherapy, high-LET selective radiation treatment and a more conservative surgery. [ABSTRACT FROM AUTHOR]

The zinc(ii) complex of the octa-anionic 2,3,9,10,16,17,23,24-octakis-(7-methyl-7,8-dicarba-nido-undeca-boran-8-yl)hexyl-thio-6,13,20,27-phthalocyanine (nido-[ZnMCHESPc]Cs8, 7) has been obtained in the form of caesium salt through mild deboronation of the neutral precursor, the closo-[ZnMCHESPc] complex, 6, with CsF. 6 has been synthesized, in turn, by heating a finely ground mixture of the appropriate phthalonitrile and zinc(ii) acetate at 180.0 °C. The complexes have been characterized by elemental analyses, FT-IR, UV-visible absorption and fluorescence emission spectroscopy, and their structures were assessed by 1H, 13C, 11B, and two-dimensional homo- and hetero-correlated NMR spectroscopy experiments. 7 showed appreciable solubility in water solution, together with a marked tendency to aggregate. Aggregation of 7 in the hydrotropic medium resulted in significant fluorescence quenching. Instead, fluorescence quantum yields (ΦF) of 0.14 and 0.08, and singlet oxygen quantum yields (ΦΔ) of 0.63 and 0.24 were obtained for 6 and 7, respectively, in a DMF solution. In vitro boron neutron capture therapy (BNCT) experiments, employing boron imaging techniques as implemented in qualitative and quantitative neutron autoradiography methods, showed that 7 is capable of increasing the boron concentration of two selected cancerous cell lines, the DHD/K12/TRb of rat colon adenocarcinoma and UMR-106 of rat osteosarcoma, with the large-size Cs+ counter-ions used to neutralize the negatively charged carborane polyhedra not presenting a significant obstacle to the process. Taken together, BNCT and photophysical measurement results indicated that 7 is potentially suitable for bimodal or multimodal anticancer therapy. [ABSTRACT FROM AUTHOR]

Background. We previously demonstrated the therapeutic success of sequential boron neutron capture therapy (Seq-BNCT) in the hamster cheek pouch oral cancer model. It consists of BPA-BNCT followed by GB-10-BNCT 24 or 48 hours later. Additionally, we proved that tumor blood vessel normalization with thalidomide prior to BPA-BNCT improves tumor control. The aim of the present study was to evaluate the therapeutic efficacy and explore potential boron microdistribution changes in Seq-BNCT preceded by tumor blood vessel normalization. Material and Methods. Tumor bearing animals were treated with thalidomide for tumor blood vessel normalization, followed by Seq-BNCT (Th+ Seq-BNCT) or Seq-Beam Only (Th+ Seq-BO) in the window of normalization. Boron microdistribution was assessed by neutron autoradiography. Results. Th+ Seq-BNCT induced overall tumor response of 100%, with 87 (4)% complete tumor response. No cases of severe mucositis in dose-limiting precancerous tissue were observed. Differences in boron homogeneity between tumors pre-treated and not pre-treated with thalidomide were observed. Conclusion. Th+ Seq-BNCT achieved, for the first time, response in all treated tumors. Increased homogeneity in tumor boron microdistribution is associated to an improvement in tumor control. [ABSTRACT FROM AUTHOR]

26933390 4 Suzuki M. Boron neutron capture therapy (BNCT): A unique role in radiotherapy with a view to entering the accelerator-based BNCT era. Boron Neutron Capture Therapy (BNCT) is a binary radiation treatment exploiting a nuclear reaction occurring in tumor cells. More interconnections between standard photon therapy and charged particle therapy methods and BNCT should be fostered to establish a common language that can be used to compare and eventually combine treatments. [Extracted from the article]

Simple Summary: A compact neutron source has been proposed and created at the Budker Institute of Nuclear Physics in Novosibirsk, Russia. The source comprises an original design tandem accelerator, solid lithium target, and a neutron beam shaping assembly. The neutron source is capable of producing the high neutron flux in various energy ranges, from thermal to fast, for boron neutron capture therapy, as well as for other applications. A lot of scientific research has been carried out at the facility, including the study of blistering and its effect on the neutron yield. The Boron Neutron Capture Therapy (BNCT) technique is being tested in in vitro and in vivo studies, and the methods of dosimetry are being developed. It is planned to certify the neutron source next year and conduct clinical trials on it. The neutron source served as a prototype for a facility created for a clinic in Xiamen (China). A compact accelerator-based neutron source has been proposed and created at the Budker Institute of Nuclear Physics in Novosibirsk, Russia. An original design tandem accelerator is used to provide a proton beam. The proton beam energy can be varied within a range of 0.6–2.3 MeV, keeping a high-energy stability of 0.1%. The beam current can also be varied in a wide range (from 0.3 mA to 10 mA) with high current stability (0.4%). In the device, neutron flux is generated as a result of the 7Li(p,n)7Be threshold reaction. A beam-shaping assembly is applied to convert this flux into a beam of epithermal neutrons with characteristics suitable for BNCT. A lot of scientific research has been carried out at the facility, including the study of blistering and its effect on the neutron yield. The BNCT technique is being tested in in vitro and in vivo studies, and the methods of dosimetry are being developed. It is planned to certify the neutron source next year and conduct clinical trials on it. The neutron source served as a prototype for a facility created for a clinic in Xiamen (China). [ABSTRACT FROM AUTHOR]

Simple Summary: Clinical potential and safety are presented as novel criteria to evaluate neutron beams designed for boron neutron capture therapy (BNCT). The presently used figures of merit are a set of physical quantities calculated in air, related to the neutron flux, the collimation, and the spectral characteristics. However, the capability of the beam to deliver an effective and safe treatment to patients should be the most important criterion in view of the clinical application. This work presents the design of a neutron beam produced by a proton accelerator coupled to a beryllium target and the use of new figures of merit to choose the best beam among different candidates. These figures of merit use tridimensional dosimetry simulated in phantoms and patients, to calculate the probability of tumor control without affecting healthy tissues, employing proper radiobiological models. Moreover, the dose absorbed by out-of-field healthy organs is used as a criterion to establish the safest beam for clinical treatments. Results show that beams that would be rejected by physical in-air quantities demonstrate a clinical performance comparable to existing neutron beams successfully used for patients, and that the presented criteria allow a clear selection of the most adequate beam among the ones presented. (1) Background:The quality of neutron beams for Boron Neutron Capture Therapy (BNCT) is currently defined by its physical characteristics in air. Recommendations exist to define whether a designed beam is useful for clinical treatment. This work presents a new way to evaluate neutron beams based on their clinical performance and on their safety, employing radiobiological quantities. (2) Methods: The case study is a neutron beam for deep-seated tumors from a 5 MeV proton beam coupled to a beryllium target. Physical Figures of Merit were used to design five beams; however, they did not allow a clear ranking of their quality in terms of therapeutic potential. The latter was then evaluated based on in-phantom dose distributions and on the calculation of the Uncomplicated Tumor Control Probability (UTCP). The safety of the beams was also evaluated calculating the in-patient out-of-beam dosimetry. (3) Results: All the beams ensured a UTCP comparable to the one of a clinical beam in phantom; the safety criterion allowed to choose the best candidate. When this was tested in the treatment planning of a real patient treated in Finland, the UTCP was still comparable to the one of the clinical beam. (4) Conclusions: Even when standard physical recommendations are not met, radiobiological and dosimetric criteria demonstrate to be a valid tool to select an effective and safe beam for patient treatment. [ABSTRACT FROM AUTHOR]

Neutron capture therapy (NCT) is a form of radiotherapy that exploits the potential of some specific isotopes to capture thermal neutrons and subsequently yield high linear energy transfer (LET) particles, suitable for cancer treatment. Recently, relevant technological improvements have been made in terms of accelerators as suitable neutron sources for NCT at hospitals. However, low selective delivery of current drugs to cancer cells remains as the main challenge for successful clinical application of NCT. This work presents an innovative and previously unexplored approach for the design of nanotherapeutic NCT agents. Herein, a new concept based on carbon nanomaterials that seal 6Li active NCT nuclides is investigated. The 6Li active species are located in the inner cavity of the nanocarrier (carbon nanohorns or carbon nanotubes) and therefore, completely protected from the biological environment, avoiding toxicity and degradation. After encapsulation of the active cargo, the external surface of the nanocarrier is modified for improved biocompatibility. The developed 6Li-filled carbon nanohorns offered the possibility to explore 6Li compounds as active NCT agents by delivering therapeutic doses to cancer cells. We envisage that nanoencapsulation of 6Li can trigger the successful development and implementation of Lithium Neutron Cancer Therapy (LiNCT). [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: A PGNAA facility is being developed for 10B concentration measurements at RA-3 reactor. Its design targets detection limits better than tenths of a microgram and irradiation times on the order of minutes. Computational models were developed, which estimated thermal neutron fluxes in irradiation position to be larger than 109 ncm−2 s−1. Calculated amounts of photons and fast neutrons make necessary for filter/moderator arrangements. An irradiation device was designed and numerically tested, which is being built and is to be used for performing characterizing measurements. [Copyright &y& Elsevier]

The neutron autoradiography technique using polycarbonate nuclear track detectors (NTD) has been extended to quantify the boron concentration in hard tissues, an application of special interest in Boron Neutron Capture Therapy (BNCT). Chemical and mechanical processing methods to prepare thin tissue sections as required by this technique have been explored. Four different decalcification methods governed by slow and fast kinetics were tested in boron-loaded bones. Due to the significant loss of the boron content, this technique was discarded. On the contrary, mechanical manipulation to obtain bone powder and tissue sections of tens of microns thick proved reproducible and suitable, ensuring a proper conservation of the boron content in the samples. A calibration curve that relates the 10 B concentration of a bone sample and the track density in a Lexan NTD is presented. Bone powder embedded in boric acid solution with known boron concentrations between 0 and 100 ppm was used as a standard material. The samples, contained in slim Lexan cases, were exposed to a neutron fluence of 10 12 cm −2 at the thermal column central facility of the RA-3 reactor (Argentina). The revealed tracks in the NTD were counted with an image processing software. The effect of track overlapping was studied and corresponding corrections were implemented in the presented calibration curve. Stochastic simulations of the track densities produced by the products of the 10 B thermal neutron capture reaction for different boron concentrations in bone were performed and compared with the experimental results. The remarkable agreement between the two curves suggested the suitability of the obtained experimental calibration curve. This neutron autoradiography technique was finally applied to determine the boron concentration in pulverized and compact bone samples coming from a sheep experimental model. The obtained results for both type of samples agreed with boron measurements carried out by ICP-OES within experimental uncertainties. The fact that the histological structure of bone sections remains preserved allows for future boron microdistribution analysis. [ABSTRACT FROM AUTHOR]