Search

Bone loss is a major burden for society and impacts people's health all over the world. In a changing world looking toward a more conscious use of raw materials, efforts are being made to increasingly consider new promising biomaterials that account for, on one side, the ability to provide specific functional biological activities and, on the other, the feature of being well tolerated. In this regard, the use of phenolic compounds in the field of bone-related bioengineering shows a rising interest in the development of medical solutions aimed at taking advantage of the multiple beneficial properties of these plant molecules. In this work, the anti-bacterial and anti-inflammatory power of a biphasic calcium phosphate synthetic bone filler coated with a mixture of phenolic compounds was investigated by evaluating the minimal inhibitory concentration (MIC) value against Streptococcus mutans and Porphyromonas gingivalis and the expression of genes involved in inflammation and autophagy by real-time reverse transcription polymerase chain reaction (RT-qPCR) on J774a.1 murine macrophage cells. Results show a MIC of 0.8 μg/mL, a neat anti-inflammatory effect, and induction of autophagy key genes compared to a ceramic bone filler. In conclusion, functionalization with a polyphenol-rich extract confers to a ceramic bone filler anti-bacterial and anti-inflammatory properties. [ABSTRACT FROM AUTHOR]

To endow an implant surface with enhanced properties to ensure an appropriate seal with the host tissue for inflammation/infection resistance, next-generation bone implant collagen–polyphenol nanolayers were built on conventional titanium surfaces through a multilayer approach. X-ray Photoelectron Spectroscopy (XPS) analysis was performed to investigate the chemical arrangement of molecules within the surface layer and to provide an estimate of their thickness. A short-term (2 and 4 weeks) in vivo test of bone implants in a healthy rabbit model was performed to check possible side effects of the soft surface layer on early phases of osteointegration, leading to secondary stability. Results show the building up of the different nanolayers on top of titanium, resulting in a final composite collagen–polyphenol surface and a layer thickness of about 10 nm. In vivo tests performed on machined and state-of-the-art microrough titanium implants do not show significant differences between coated and uncoated samples, as the surface microroughness remains the main driver of bone-to-implant contact. These results confirm that the surface nanolayer does not interfere with the onset and progression of implant osteointegration and prompt the green light for specific investigations of the potential merits of this bioactive coating as an enhancer of the device/tissue seal. [ABSTRACT FROM AUTHOR]

An injectable delivery platform for promoting delayed bone healing has been developed by combining a thermosensitive polyurethane-based hydrogel with strontium-substituted mesoporous bioactive glasses (MBG_Sr) for the long-term and localized co-delivery of pro-osteogenic Sr2+ ions and an osteogenesis-enhancing molecule, N-Acetylcysteine (NAC). The incorporation of MBG_Sr microparticles, with a final concentration of 20 mg/mL, did not alter the overall properties of the thermosensitive hydrogel, in terms of sol-to-gel transition at a physiological-like temperature, gelation time, injectability and stability in aqueous environment at 37 °C. In particular, the hydrogel formulations (15% w/v polymer concentration) showed fast gelation in physiological conditions (1 mL underwent complete sol-to-gel transition within 3–5 min at 37 °C) and injectability in a wide range of temperatures (5–37 °C) through different needles (inner diameter in the range 0.4–1.6 mm). In addition, the MBG_Sr embedded into the hydrogel retained their full biocompatibility, and the released concentration of Sr2+ ions were effective in promoting the overexpression of pro-osteogenic genes from SAOS2 osteoblast-like cells. Finally, when incorporated into the hydrogel, the MBG_Sr loaded with NAC maintained their release properties, showing a sustained ion/drug co-delivery along 7 days, at variance with the MBG particles as such, showing a strong burst release in the first hours of soaking. [ABSTRACT FROM AUTHOR]

This case report provided a unique opportunity to investigate the extent of microbiota infiltration on the oxidized implant surface that has been compromised by peri-implantitis. Scanning electron microscopic analysis confirmed the etiologic role of the bacteria on the loss of supporting structure and the difficulty in complete removal of bacterial infiltration on the implant surface. This case report emphasizes the need to perform definitive surface decontamination on failing dental implants prior to a regeneration procedure. [ABSTRACT FROM AUTHOR]

Purpose: This study was conducted to analyze how a cleaning treatment using plasma of argon would affect fibroblast growth on titanium disks at different time points to determine whether this treatment could enhance soft tissue healing around titanium dental implant abutments. Materials and Methods: Sixty sterile disks made of machined grade 5 titanium were divided into two groups; 30 disks were left untreated (control) and 30 were cleaned using plasma of argon (test). To simulate clinical conditions during soft tissue healing around titanium abutments, both groups were immersed in a culture of murine fibroblasts (L929) for 2, 8, or 48 hours. After preparation, they were stained using 4',6-diamidino-2-phenylindole dihydrochloride (DAPI) to label the cellular nuclei and fluorescent phalloidin to label the cellular bodies. The nuclei were counted, and cellular bodies were analyzed with fluorescent microscopy and imaging analysis software. Analysis was performed at the three different time points. Results: Fibroblast adhesion for the test group was statistically significantly greater versus the control group at 2 and 8 hours but not at 48 hours. At 2 and 8 hours, the cellular bodies in the test group appeared flatter and more spread out, revealing more advanced cellular adhesion, compared to the cells observed in the control group. At 48 hours, the test and control specimens were nearly indistinguishable. Conclusion: The removal of organic and inorganic contaminants from the surfaces of titanium disks using plasma of argon accelerated fibroblast adhesion in the early stages of colonization (2 to 8 hours). This effect disappeared after 48 hours as a result of saturation. Clinically, abutment cleaning using plasma of argon might positively affect soft tissue healing in early stages. [ABSTRACT FROM AUTHOR]

Mesoporous bioactive glass nanoparticles (MBG) are multifunctional building blocks for tissue regeneration and nanomedicine applications. Incorporation of biologically active ions can endow MBG with additional functionalities toward promoted therapeutic effects. Here, boron is incorporated into MBG by using a sol–gel approach. The concentration of boron incorporated is controllable by tuning the amount of boron precursor. Two types of boron‐doped MBG, namely 10B‐ and 15B‐MBG (5.8 and 6.5 mol% of B2O3, respectively) are synthesized. Boron incorporation does not significantly influence the particle morphology. All synthesized particles exhibit a sphere‐like shape with a size ranging from 100 to 300 nm. 10B‐ and 15B‐MBG show large specific surface area (346 and 320 m² g−1, respectively) and pore volume. Both boron‐doped MBG exhibit remarkable in vitro bioactivity and noncytotoxicity. Boron incorporation is shown to reduce the inflammatory response linked to macrophages as indicated by downregulated expression of pro‐inflammatory genes. However, boron incorporation delays the osteogenic differentiation in osteoblasts as indicated by the downregulated expression of pro‐osteogenic genes. The results demonstrate the promising potential of using boron‐doped MBG to modulate inflammatory response for bone regeneration under inflammatory conditions, as shown in this study for the first time. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to evaluate the surface chemistry and the microhardness at the implant-bone interface using a recently developed collagen-coated titanium implant in a short-term rabbit model. Materials and Methods: Surface chemistry was evaluated by x-ray photoelectron spectroscopy (XPS), while in vivo studies involved 4-week implants mid-diaphysis in the lateral femurs of adult male rabbits. After conventional embedding and evaluation of histologic sections, the resinembedded blocks containing the implanted screws were used to measure bone hardness by means of an indentation test. Results: Decomposition of the C1s peak obtained by XPS analysis confirmed that surface-immobilized collagen retained all the molecular features of the control, nonimmobilized reference. As to microhardness measurement, newly formed bone at the collagen-coated-implant/bone interface was significantly harder than bone at the interface of the uncoated control implant and bone. Discussion: These results suggested that collagen coating significantly improves bone maturation and mineralization at the interface in comparison with uncoated commercially pure titanium. Surface modification of titanium implants by collagen coating has recently been discussed as a promising approach to the biochemical modification of implant surfaces. The present results support previous histologic findings and demonstrated that the biomolecular layer linked over the titanium implant can increase the bone healing rate, at least in this animal model. Conclusions: The present microhardness measurement at the bone-implant interface showed that collagen coating can significantly improve bone maturation and mineralization at the interface in comparison with uncoated commercially pure titanium, confirming and substantiating previous findings by histomorphometric measurements from the same model. [ABSTRACT FROM AUTHOR]

Purpose: To determine, in vitro, cytotoxicity and cell adhesion on 3 different implant surfaces. Materials and Methods: All samples had machined surfaces, but they were subjected to different cleaning procedures, which produced 3 different surface chemistries. One of the samples was "as-produced" from the machining tools. The other samples were subjected to partial and total cleaning routines. Cytotoxicity was evaluated using mouse fibroblast cultures, and cell adhesion was evaluated with osteoblast-like SaOS-2 cells. Results: The "as-produced" sample showed a pronounced surface contamination by lubricating oils. For partially and totally cleaned samples, an increasing amount of titanium and a decreasing carbon/titanium ratio was observed as cleaning became more complete. Discussion: Differences in surface chemistry such as those normally found on titanium implant surfaces (see part 1 of this series) can lead to those same effects which, in in vitro experiments, are normally accounted for in terms of surface topography alone. Conclusion: Effects related to surface chemistry can operate over and above surface topography, making it impossible, without proper characterization, to make definite statements about the role of topography alone. [ABSTRACT FROM AUTHOR]

Purpose: To analyze the surface composition of 34 different commercially available titanium dental implants. Materials and Methods: Surface composition was evaluated by x-ray photoelectron spectroscopy (XPS). Samples were divided into 4 groups, depending on their surface topography (machined, sandblasted, acid etched, or plasma sprayed). Results: Statistical analysis of the data showed a clear relationship between surface composition and topography, which can be easily accounted for by the chemical effects of the surface treatment performed. On average, acid-etched and plasma-sprayed surfaces had higher titanium and lower carbon concentration than machined surfaces. Discussion and Conclusion: Current studies aimed at the evaluation of implants with different topography should not implicitly assume that topography is the only variable controlling the biologic response. Rather, when comparing different topographies, it should be taken into account that surface chemistry may be a variable as well. [ABSTRACT FROM AUTHOR]

The objectives of this study are to evaluate long‐term wettability of novel surface‐engineered, clinically available dental implants, featuring a surface nanolayer of covalently linked hyaluronan, and to confirm the relationships between wetting properties and surface nanostructure and microstructure. Wettability measurements were performed on clinically available hyaluronan‐coated Grade 4 titanium implants, packaged and sterile, that is, in the "on the shelf" condition, after 1 year from production. Wetting properties were measured by the Wilhelmy plate method. Analysis of the surface structure and chemistry was perfomed by X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and energy‐dispersive X‐ray (EDX) analysis, atomic force microscopy (AFM), and ζ‐potential measurement, either on implants or disks or plates subjected to the same surface‐engineering process. Results show that hydrophilicity and ensuing capillary rise of the hyaluronan‐coated implant surface is unaffected by aging and dry storage. Chemical analysis of the implant surface by XPS and evaluation of the ζ potential indicate that hyaluronan chemistry and not that of titanium dictates interfacial properties. Comparison between XPS versus EDX and SEM versus AFM data confirm that the thickness of the hyaluronan surface layer is within the nanometer range. Data show that nanoengineering of the implant surface by linking of the hydrophilic hyaluronan molecule endows tested titanium implants by permanent wettability, without need of wet storage as presently performed to keep long‐term hydrophilic implant surfaces. From an analytical point of view, the introduction in routine clinical practice of nanoengineered implant surfaces requires upgrading of analytical methods to the nanoscale. [ABSTRACT FROM AUTHOR]

Replacement of bone loss or reconstruction of bone defect is still a clinical challenge. Synergoss® is a recently developed synthetic bone filler that exploits biomolecular surface engineering to deliver directly to the filler-implant interface the signaling properties of type I collagen. In this article, we compared Synergoss ® bone filler with the most used materials present on the market derived from animal source (Bio-Oss®, Gen-Os®) or synthetic source (BoneCeramic®). All tested bone fillers were analyzed by ATR-IR, providing information concerning the chemical composition and the main functional groups. Surface zeta potential analysis shows a positive surface charge for Synergoss®, confirming that the material exposes a collagen nanolayer to the surrounding environment, unlike typical synthetic and bone-based fillers. The chemical composition of the first few nanometers of the surface of tested bone fillers was evaluated by XPS, and Synergoss ® shows a significant amount of nitrogen (9.8 at%), which is not detected in any of the remaining materials. Morphological structure of Synergoss® (analyzed by SEM) shows a uniformly distributed micro- and macroporosity, which plays an essential role in influencing cell adhesion and blood vessel infiltration, nutrient transportation, and clot formation to stimulate the overall healing process. [ABSTRACT FROM AUTHOR]

The goal of the present work was to investigate the relationship between in vivo healing and inflammatory response and in vitro cytokine expression by macrophages of a synthetic bone filler (25% hydroxylapatite-75% β-tricalcium phosphate) bearing a surface nanolayer of collagen. A clinically accepted, state-of-the-art xenograft material was used as a “negative control,” that is, as a material that provides the correct clinical response for the intended use. In vitro data show that both materials exert a very low stimulation of proinflammatory cytokines by macrophages, and this was confirmed by the very mild inflammatory response detected in in vivo tests of local response in a rabbit model. Also, in vitro findings suggest a different mechanism of healing for the test and the control material, with a higher regenerative activity for the synthetic, resorbable filler, as confirmed by in vivo observation and literature reports. Thus, the simple in vitro model adopted provides a reasonable forecast of in vivo results, suggesting that new product development can be guided by in vitro tuning of cell-materials interactions. [ABSTRACT FROM AUTHOR]

Osteoimmunology is the crosstalk between cells from the immune and skeletal systems, suggesting a role of pro-inflammatory cytokines in the stimulation of osteoclast activity. Endotoxin or bacterial challenges to inflammatory cells are directly relevant to dental implant pathologies involving bone resorption, such as osseointegration failure and peri-implantitis. While the endotoxin amount on implant devices is regulated by standards, it is unknown whether commercially available dental implants elicit different levels of adherent- endotoxin stimulated cytokines. The objective of this work is to develop a model system and evaluate endotoxin-induced expression of pro-inflammatory cytokine genes relevant to osteoclast activation on commercially available dental implants. Murine J774-A1 macrophages were cultured on Ti disks with different level of lipopolysaccharide (LPS) contamination to define the time-course of the inflammatory response to endotoxin, as evaluated by reverse transcription polymerase chain reaction analysis. The developed protocol was then used to measure adherent endotoxin on commercially available packaged and sterile dental implants in the "as-implanted" condition. Results show that tested dental implants induce variable expression of endotoxin-stimulated genes, sometimes above the level expected to promote bone resorption in vivo. Results are unaffected by the specific surface treatment; rather, they likely reflect care in cleaning and packaging protocols. In conclusion, expression of genes that enhance osteoclast activity through endotoxin stimulation of inflammatory cells is widely different on commercially available dental implants. A reappraisal of the clinical impact of adherent endotoxins on dental (and bone) implant devices is required in light of increasing knowledge on crosstalk between cells from the immune and skeletal systems. [ABSTRACT FROM AUTHOR]

Background: The aim of this study was to analyze the effects of erbium-doped:yttrium, aluminum, and garnet (Er:YAG) laser and ultrasonic treatment on fibroblast attachment to periodontally diseased root surfaces. Methods: Thirty single-rooted human periodontally involved teeth were included in this study. A total of 60 specimens were obtained from all selected teeth and were randomly assigned to the following three groups: group A, untreated control group; group B, ultrasonic group; and group C, Er:YAG laser at 160 m J/pulse at 10 Hz group. All of the specimens were incubated in petri dishes with fibroblast suspension and observed by scanning electron microscopy. Results: Laser-treated specimens showed a significantly higher cell density number, with a mean ± SD of 3,720 ± 316 cells/mm². The ultrasonically treated group showed a lower cell density number, with a mean ± SD of 658 ± 140 cells/ mm². The untreated control group showed the lowest cell density number, with a mean ± SD of 130 ± 80 cells/mm². Differences between all groups were significant (P <0.0001 ). Conclusion: The results of the study indicate that untreated control surfaces and ultrasonically treated surfaces exhibited a significantly lower number of attached cells compared to laser-treated specimens, which showed a significantly higher cell density number. [ABSTRACT FROM AUTHOR]

Hyaluronan (HA) was immobilized on aminated glass surfaces in three different ways: by simple ionic interaction and by covalent linking at low density and at full density. In agreement with previous reports, in vitro experiments show that the outcome of fibroblast adhesion tests is markedly affected by the details of the coupling procedure, suggesting that different interfacial forces are operating at the aqueous/HA interface in the three cases investigated. The interfacial properties of the HA-coated surfaces were probed by force–distance curves obtained with the atomic force microscope (AFM). This approach readily shows significant differences among the tested samples, which are directly related to the coupling strategy and to results of cell adhesion tests. In particular, the range of interaction between the tip and the surface is much lower when HA is covalently linked than when it is ionically coupled, suggesting a more compact surface structure in the former case. Increasing HA surface density minimizes the interaction force between the surface and the AFM tip, likely reflecting more complete shielding by the HA chains of the underlying substrate. In summary, these measurements clearly show the different nature of the aqueous interfaces tested, and underline the role of this analytical approach in the development and control of finely tuned biomaterial surfaces. [Copyright &y& Elsevier]

Polymethylmethacrylate intraocular lenses (IOLs) were surface-modified by the linking of a overlayer of hyaluronan. In vitro experiments show that the hydrophilic HA overlayer prevents fibroblasts adhesion and greatly reduces Staphyloccous epidermidis adhesion to the IOL surface. To gain insights into the interfacial properties of untreated and hyaluronan-coated PMMA IOLs, force-distance curves were obtained by atomic force microscopy, using standard and modified tips. These measurements allow clear appreciation of the marked difference between the mechanical and chemico-physical properties at the aqueous interface of the uncoated and hyaluronan-coated lenses. [ABSTRACT FROM AUTHOR]

Oral diseases and periodontitis in particular are a major health burden worldwide, because of their association with various systemic diseases and with conditions such as peri-implantitis. Attempts have been made over the years to reverse bone loss due to the host disproportionate inflammatory response and to prevent failure of dental implants. To this end, the use of biomaterials functionalized with molecules characterized by anti-inflammatory and antioxidant properties could represent a new frontier for regenerating functional periodontal tissues. In this study, a new ceramic granulated biomaterial, named Synergoss Red (SR), functionalized with a polyphenolic mixture extracted from pomace of the Croatina grape variety, is introduced. Following a preliminary in-depth characterization of the extract by HPLC analysis and of the biomaterial surface and composition, we performed evaluations of cytocompatibility and a biological response through in vitro assays. The anti-inflammatory and antioxidant properties of the identified phenolic molecules contained in SR were shown to downregulate inflammation in macrophages, to stimulate in osteoblast-like cells the expression of genes involved in deposition of the early bone matrix, and to mitigate bone remodeling by decreasing the RANKL/OPG ratio. Thanks to its cytocompatibility and assorted beneficial effects on bone regeneration, SR could be considered an innovative regenerative approach in periodontal therapy. [ABSTRACT FROM AUTHOR]

In the present study, the cytotoxicity and the antimicrobial activity of two silver citrate-based irrigant solutions were investigated. Cytotoxicity of various concentrations (0.25%, 0.5%, 1%, 2.5%, 5%) of both solutions (BioAKT and BioAKT Endo) was assessed on L-929 mouse fibroblasts using the MTT assay. For the quantitative analysis of components, an infrared (I.R.) spectroscopy was performed. The minimum inhibitory and minimal bactericidal concentrations (M.I.C. and M.B.C., respectively) were ascertained on Enterococcus faecalis strain ATCC 4083. For biofilm susceptibility after treatment with the irrigating agent, a minimum biofilm eradication concentration (M.B.E.C.) and confocal laser scanning microscope (C.L.S.M.) assays were performed. Quantification of E. faecalis cell biomass and percentage of live and dead cells in the biomass was appraised. Normality of data was analyzed using the D'Agostino & Pearson's test and the Shapiro–Wilk test. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey's test. Both silver citrate solutions showed mouse fibroblasts viability >70% when diluted to 0.25% and 0.5%. Conversely, at higher concentrations, they were extremely cytotoxic. F.T.-IR spectroscopy measurements of both liquids showed the same spectra, indicating similar chemical characteristics. No substantial contrast in antimicrobial activity was observed among the two silver citrate solutions by using broth microdilution methods, biofilm susceptibility (MBEC-HTP device), and biomass screening using confocal laser scanning microscopy (C.L.S.M.) technique. Both solutions, used as root canal irrigants, exhibited significant antimicrobial activity and low cytocompatibility at dilutions greater than 0.5%. [ABSTRACT FROM AUTHOR]

To achieve optimal performances, guided bone regeneration membranes should have several properties, in particular, proper stiffness and tear resistance for space maintenance, appropriate resorption time, and non-cytotoxic effect. In this work, polyphenol-rich pomace extract (PRPE), from a selected grape variety (Nebbiolo), rich in proanthocyanidins and flavonols (e.g., quercetin), was used as a rich source of polyphenols, natural collagen crosslinkers, to improve the physical properties of the porcine pericardium membrane. The incorporation of polyphenols in the collagen network of the membrane was clearly identified by infra-red spectroscopy through the presence of a specific peak between 1360–1380 cm−1. Polyphenols incorporated into the pericardium membrane bind to collagen with high affinity and reduce enzymatic degradation by 20% compared to the native pericardium. The release study shows a release of active molecules from the membrane, suggesting a possible use in patients affected by periodontitis, considering the role of polyphenols in the control of this pathology. Mechanical stiffness is increased making the membrane easier to handle. Young's modulus of pericardium treated with PRPE was three-fold higher than the one measured on native pericardium. Tear and suture retention strength measurement suggest favorable properties in the light of clinical practice requirements. [ABSTRACT FROM AUTHOR]

Biochemical modification of titanium surfaces (BMTiS) entails immobilization of biomolecules to implant surfaces in order to induce specific host responses. This crossover randomized clinical trial assesses clinical success and marginal bone resorption of dental implants bearing a surface molecular layer of covalently-linked hyaluronan in comparison with control implants up to 36 months after loading. Patients requiring bilateral implant rehabilitation received hyaluronan covered implants in one side of the mouth and traditional implants in the other side. Two months after the first surgery, a second surgery was undergone to uncover the screw and to place a healing abutment. After two weeks, the operator proceeded with prosthetic procedures. Implants were evaluated by periapical radiographs and the crestal bone level was recorded at mesial and distal sites—at baseline and up to 36 months. One hundred and six implants were positioned, 52 HY-coated, and 48 controls were followed up. No differences were observed in terms of insertion and stability, wound healing, implant success, and crestal bone resorption at any time considered. All interventions had an optimal healing, and no adverse events were recorded. This trial shows, for the first time, a successful use in humans of biochemical-modified implants in routine clinical practice and in healthy patients and tissues with satisfactory outcomes. [ABSTRACT FROM AUTHOR]

Over the recent years, mesoporous bioactive glasses (MBGs) gained interest as bone regeneration systems, due to their excellent bioactivity and ability to release therapeutic molecules. In order to improve the bone regeneration ability of MBGs, the incorporation of Sr2+ ions, due to its recognized pro-osteogenenic potential, represents a very promising strategy. In this study, MBGs based on the SiO2–CaO system and containing different percentages (2 and 4 mol %) of strontium were prepared by two synthesis methods, in the form of microspheres and nanoparticles. Sr-containing MBGs were characterized by FE-SEM, XRD and N2 adsorption/desorption analysis. The in vitro bioactivity in SBF resulted excellent. The assessment of fibroblast cell (line L929) viability showed that Sr-containing MBGs were biocompatible both in form of micro- and nanoparticles. The osteogenic response of osteoblast-like SAOS-2 cells was investigated by analysing the expression of GAPDH, COL1a1, RANKL, SPARC, OPG and ALPL genes, as cell differentiation markers. The results indicate that the incorporation of Sr into MBG is beneficial for bone regeneration as promotes a pro-osteogenic effect, paving the way to the design of advanced devices enabled by these nanocarriers also in combination with drug release, for the treatment of bone pathologies, particularly in patients with osteoporosis. [ABSTRACT FROM AUTHOR]

The objects of this research are commercially pure titanium surfaces, with multifunctional behavior, obtained through a chemical treatment and biological functionalization. The explored surfaces are of interest for dental implants, in contact with bone, where several simultaneous and synergistic actions are needed, in order to get a fast and effective osseointegration. The here described modified surfaces present a layer of titanium oxide, thicker than the native one, with a multi-scale surface topography (a surface roughness on the nano scale, which can be overlapped to a micro or macro roughness of the substrate) and a high density of OH groups, that increase surface wettability, induce a bioactive behavior (hydroxyapatite precipitation in simulated body fluid) and make possible the grafting of biomolecules (alkaline phosphatase, ALP, in the present research). The surface oxide is an efficient barrier against corrosion, with passive behavior both with and without application of an external voltage. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to describe an innovative treatment for titanium dental implants, aimed at faster and more effective osteointegration. The treatment has been performed with the use of hydrogen peroxide, whose action was enhanced by concomitant exposure to a source of ultraviolet light. The developed surface oxide layer was characterized from the physical and chemical points of view. Moreover osteoblast-like SaOS2 cells were cultured on treated and control titanium surfaces and cell behavior investigated by scanning electron microscope observation and gene expression measurements. The described process produces, in only 6 min, a thin, homogeneous, not porous, free of cracks and bioactive (in vitro apatite precipitation) oxide layer. High cell density, peculiar morphology and overexpression of several genes involved with osteogenesis have been observed on modified surfaces. The proposed process significantly improves the biological response of titanium surfaces, and is an interesting solution for the improvement of bone integration of dental implants. A clinical application of the described surfaces, with a 5 years follow-up, is reported in the paper, as an example of the effectiveness of the proposed treatment. [ABSTRACT FROM AUTHOR]

Abstract: Improved biocompatibility and performance of biomedical devices can be achieved through the incorporation of bioactive molecules on device surfaces. Five structurally distinct pectic polysaccharides (modified hairy regions (MHRs)) were obtained by enzymatic liquefaction of apple (MHR-B, MHR-A and MHR-α), carrot (MHR-C) and potato (MHR-P) cells. Polystyrene (PS) Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of the MHRs. Results clearly demonstrate that MHR-B induces cell adhesion, proliferation and survival, in contrast to the other MHRs. Moreover, MHR-α causes cells to aggregate, decrease proliferation and enter into apoptosis. Cells cultured in standard conditions with 1% soluble MHR-B or MHR-α show the opposite behaviour to the one observed on MHR-B and -α-grafted PS. Fibronectin was similarly adsorbed onto MHR-B and tissue culture polystyrene (TCPS) control, but poorly on MHR-α. The Fn cell binding site (RGD sequence) was more accessible on MHR-B than on TCPS control, but poorly on MHR-α. The disintegrin echistatin inhibited fibroblast adhesion and spreading on MHR-B-grafted PS, which suggests that MHRs control fibroblast behaviour via serum-adhesive proteins. This study provides a basis for the design of intelligently-tailored biomaterial coatings able to induce specific cell functions. [Copyright &y& Elsevier]

Previous work has reported the results of a multidisciplinary effort producing a proof-of-concept on the use of pectic polysaccharides in the surface modification of medical devices. This study was designed to learn more about the capability of engineered rhamnogalacturonan-I (RG-I) fractions of apple pectin to control bone cell and macrophage behavior. Thermanox or polystyrene Petri dishes were surface modified with two different modified hairy regions (MHRs) obtained by different enzymatic liquefaction processes of apples differing in relative amounts and lengths of their neutral side chains: (long-haired) MHR-alpha and (short-haired) MHR-B. Bone explants from 14-day-old chick embryos were cultured for 14 days on both pectic substrata. MHR-B promoted cell migration and differentiation, MHR-alpha did not. On MHR-alpha, J774.2 macrophages grew well, their percentage in G1 phase was decreased and in S phase increased, and they did not secrete either proinflammatory-cytokines or nitrites. Contrasting results were gained from macrophages on MHR-B, except for nitrite secretion. Thus, we conclude that coatings from tailored pectins show different biological activities in vitro and are potential innovative candidates for improving the biocompatibility of medical devices in various applications.

Background: The aim of this study was to analyze the effects of erbium-doped:yttrium, aluminum, and garnet (Er:YAG) laser and ultrasonic treatment on fibroblast attachment to periodontally diseased root surfaces., Methods: Thirty single-rooted human periodontally involved teeth were included in this study. A total of 60 specimens were obtained from all selected teeth and were randomly assigned to the following three groups: group A, untreated control group; group B, ultrasonic group; and group C, Er:YAG laser at 160 mJ/pulse at 10 Hz group. All of the specimens were incubated in petri dishes with fibroblast suspension and observed by scanning electron microscopy., Results: Laser-treated specimens showed a significantly higher cell density number, with a mean+/-SD of 3,720+/-316 cells/mm2. The ultrasonically treated group showed a lower cell density number, with a mean+/-SD of 658+/-140 cells/mm2. The untreated control group showed the lowest cell density number, with a mean+/-SD of 130+/-80 cells/mm2. Differences between all groups were significant (P<0.0001)., Conclusion: The results of the study indicate that untreated control surfaces and ultrasonically treated surfaces exhibited a significantly lower number of attached cells compared to laser-treated specimens, which showed a significantly higher cell density number.

Polystyrene Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of two different enzymatically modified hairy regions (HRs) from pectin containing, for example, rhamnogalacturonan-I and xylogalacturonan structural elements. The two polysaccharide preparations share the same structural elements of apple pectin, but the relative amounts and lengths of the neutral side chains present differ. Surface analysis by X-ray photoelectron spectroscopy, contact angle measurement, and atomic force microscope (AFM) force-separation curves was used to characterize the effects on surface chemistry and interfacial forces of the surface modification process. Cell adhesion experiments using continuous L-929 fibroblasts and primary aortic smooth muscle cells were performed to evaluate the effect of the polysaccharide nature on cell adhesion. Results show that immobilization of the HR affects the interfacial field of forces and the cell behavior: "equilibrium" contact angles, obtained by a recently introduced vibrational approach, decrease after HR immobilization reaching a value close to 20 degrees . AFM force-separation curves show a more extended (or softer) interface in the case of the HR bearing longer side chains. Accordingly, depending on the HR preparation, cells shifted from spread morphology and adhesion behavior quantitatively comparable to that observed on conventional tissue culture polystyrene to rounded morphology and significantly lower adhesion. These data show that engineering of plant pectins can be a valuable tool to prepare novel and finely tuned polysaccharides having different chemico-physical and biological properties, to be used in the surface modification of medical devices and materials.