Search

Chemical warfare agents (CWAs) refer to toxic chemical substances used in warfare. Recently, CWAs have been a critical threat for public safety due to their high toxicity. Metal–organic frameworks have exhibited great potential in protecting against CWAs due to their high crystallinity, stable structure, large specific surface area, high porosity, and adjustable structure. However, the metal clusters of most reported MOFs might be highly consumed when applied in CWA hydrolysis. Herein, we fabricated a two-dimensional piezoresponsive UiO-66-F4 and subjected it to CWA simulant dimethyl-4-nitrophenyl phosphate (DMNP) detoxification under sonic conditions. The results show that sonication can effectively enhance the removal performance under optimal conditions; the reaction rate constant k was upgraded 45% by sonication. Moreover, the first-principle calculation revealed that the band gap could be further widened with the application of mechanical stress, which was beneficial for the generation of 1O2, thus further upgrading the detoxification performance toward DMNP. This work demonstrated that mechanical vibration could be introduced to CWA protection, but promising applications are rarely reported.

Chemical warfare agents (CWAs) have brought great threats to human life and social stability, and it is critical to investigate protective materials. MOF (metal–organic framework) gels are a class with an extended MOF architecture that are mainly formed using metal–ligand coordination as an effective force to drive gelation, and these gels combine the unique characteristics of MOFs and organic gel materials. They have the advantages of a hierarchically porous structure, a large specific surface area, machinable block structures and rich metal active sites, which inherently meet the requirements for adsorption and catalytic detoxification of CWAs. A series of advances have been made in the adsorption and catalytic detoxification of MOF gels as chemical warfare agents; however, overall, they are still in their infancy. This review briefly introduces the latest advances in MOF gels, including pure MOF gels and MOF composite gels, and discusses the application of MOF gels in the adsorption and catalytic detoxification of CWAs. Meanwhile, the influence of microstructures (pore structures, metal active site, etc.) on the detoxification performance of protective materials is also discussed, which is of great significance in the exploration of high-efficiency protective materials. Finally, the review looks ahead to next priorities. Hopefully, this review can inspire more and more researchers to enrich the performance of MOF gels for applications in chemical protection and other purification and detoxification processes.

In nature, some organisms have the ability to camouflage to adapt to environmental changes; they blend with the environment by changing their skin colors. Such a phenomenon is of great significance for the research of adaptive camouflage materials. In this study, we propose a novel design scheme for the study of angle-independent photonic materials and successfully prepare an electrically tunable multi-color display angle-independent inverse opal photonic gel (IOPG). After photopolymerization of hydroxyethyl methacrylate with ionizable monomer acrylic acid (AA) in a long-range disordered opal template and etching, the angle-independent inverse opal photonic gel is obtained, presenting a single structural color. The electrically responsive color changes can be achieved at different angles. The color of the disordered AA-IOPG changes from green to blue-green when applying +4 V bias voltage and from green to orange when applying −4 V bias voltage. The electrochromism of the disordered AA-IOPG is mainly due to the local pH change caused by water electrolysis under bias voltage, which leads to a change of the swelling ratio. The disordered AA-IOPG shows high color tunability and durability through repeated opposite bias voltage tests, indicating that it is a promising conductive photonic material.

A sensitive and flexible detection method for organophosphorus pesticides (OPs) detection is a crucial request to avoid their further expanded pollution. Herein, an acetylcholinesterase (AChE) electrochemical sensor, based on the co-modification of ZIF-8 and graphene (GR), was constructed for the detection of OPs. ZIF-8/GR composite can provide a stable and biocompatible environment for the loading of AChE and can accelerate the chemical reaction on the electrode surface. After optimization, the linear detection range of the constructed AChE-CS/GR/ZIF-8/GCE sensor for ICP was 0.5–100 ng/mL (1.73–345.7 nM), and the limit of detection was 0.18 ng/mL (0.62 nM). Moreover, high sensitivity and high specificity of the sensor were also achieved in actual cabbage and tap water samples. Therefore, it has great potential for the application of organophosphorus pesticide residue analysis.

Adding inorganic fillers to polymer electrolytes is one of the main means to improve ionic conductivity. However, the filler will aggregate, causing the problem of incompatibility between the electrolyte and the metal lithium negative electrode. According to reports, the flaky structure of graphene oxide (GO) has the characteristics of large specific surface area and stable performance, which has attracted widespread attention as a filler for polymer electrolytes. However, the electrolyte membrane has poor compatibility with lithium negative electrodes when GO as a filler, which is not conducive to the full performance of lithium batteries. In this paper, we grafted polyethylene oxide (PEO) on the surface of GO (the product is referred to as GO@PEO) to improving the dispersibility of the filler and the compatibility of the gel polymer electrolyte (GPE) with lithium metal . It is worth that after GO grafting PEO, the impedance of the interface between GPE and lithium metal is significantly reduced, and the compatibility of the electrolyte with the lithium negative electrode is significantly improved. Assembled into Li/ Li battery, the surface current cycle is stable, up to 1 mA cm ^−2 . GO@PEO further improves the ionic conductivity of the ion conductivity up to 1.6 mS cm ^−1 . Further prepared into LiFePO _4 (LFP)/Li battery, GPE-GO@PEO showed excellent cycle stability and the discharge specific capacity retention rate was 95.6% after 100 cycles. The rate performance of the battery is also significantly improved. At 5C, the discharge specific capacity of the LFP/Li battery remains 40 mAh g ^−1 .

Metal-organic frameworks (MOFs) have been used in adsorption, separation, catalysis, sensing, photo/electro/magnetics, and biomedical fields because of their unique periodic pore structure and excellent properties and have become a hot research topic in recent years. Ball milling is a method of small pollution, short time-consumption, and large-scale synthesis of MOFs. In recent years, many important advances have been made. In this paper, the influencing factors of MOFs synthesized by grinding were reviewed systematically from four aspects: auxiliary additives, metal sources, organic linkers, and reaction specific conditions (such as frequency, reaction time, and mass ratio of ball and raw materials). The prospect for the future development of the synthesis of MOFs by grinding was proposed.

Nanoscale lanthanide-containing metal-organic frameworks (MOFs) have more and more interest due to their great properties and potential applications, but how to construct them easily is still challenging. Here, we present a facile and rapid synthesis of Eu(III)-containing Nanoscale MOF (denoted as NMOF) under ultrasonic irradiation. The effect of the ratio and the addition order of metal ions and linkers on the morphology and size of MOFs was investigated. It is found that both of the ratio and the addition order can affect the morphology and size of 1.4-benzenedicarboxylic acid(H2BDC) -based MOFs, but they show no evident influence on that of H2aBDC-based MOFs. The former exhibit typical emission bands of Eu(III) ions, while the latter only show the photoluminescent properties of ligands.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9695

Zr-containing metal-organic frameworks (MOFs) exhibit a good performance of catalyzing the hydrolysis of chemical warfare agents, which is closely related to the size of MOF particles and its defects, but these two factors are often intertwined. In this article, we synthesized UiO-66-NH2 nanoparticles using a microwave-assisted hydrothermal method. By using a new modulator 4-Fluoro-3-Formyl-Benzoic Acid (FFBA) in different proportions, MOF particles with the same defect degree but different scales and those with similar sizes but different defect degrees can be obtained. The performance of the obtained MOF particles to catalyze the hydrolysis of the nerve agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP), was investigated, and the effects of single factors of size or defect were compared for the first time. As the size of the obtained MOF particles increased from 81 nm to 159 nm, the catalytic degradation efficiency toward DMNP gradually decreased, and the half-life increased from 3.9 min to 11.1 min. For MOFs that have similar crystal sizes, the catalytic degradation half-life of MOF3 is only 5 min, which is much smaller than that of MOF5 due to the defects increase from 1.2 to 1.8 per Zr6 cluster.

A mechanical ball milling method for ultrafast synthesis of a nickel-based metal organic framework (Ni-MOF) has been proposed. The Ni-MOF was successfully synthesized in merely one minute without any solvent, additives, or preliminary preparation. The effect of milling time, mechano-frequency, type of assistant liquid, and amount of assistant water were systematically explored. It was found that the product can be obtained even only at a mechano-frequency of 10 Hz within one minute without any external solvent-assist, which indicated that the crystal water present in the nickel precursor was sufficient to promote MOF formation. Increasing the milling time, raising the mechano-frequency, and the addition of assistant solvent could promote the reaction and increase the yield. The method is rapid, highly efficient, eco-friendly, and has great scalability. The product generated within merely one minute even exhibited high capacitance.

A biosensor based on a combination of cytochrome c (Cyt c), electrochemical reduced graphene oxides (ERGO), and gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) was fabricated. The proposed biosensor electrode was denoted as GCE/ERGO-Nafion/AuNPs/Cyt c/Nafion, where ERGO-Nafion was deposited by dropping graphene oxides-Nafion mixed droplet first and following electrochemical reduction, AuNPs were directly deposited on the surface of the ERGO-Nafion modified electrode by electrochemical reduction, and other components were deposited by the dropping-dry method. The effect of the deposition amount of AuNPs on direct electrochemistry of Cyt c in the proposed electrode was investigated. The hydrogen peroxide was taken to evaluate the performance of the proposed biosensor. The results showed that the biosensor has great analytical performance, including a high sensitivity, a wide linear range, a low detection limit, and good stability, reproducibility, and reliability.

Herein, a facile dopamine assisted one-pot synthesis approach is proposed for the preparation of porous carbon with a specific surface area (SSA) up to 2593 m2/g through the direct pyrolysis of a mixture of glucose, NH4Cl, and dopamine hydrochloride (DAH). The glucose is adopted as the carbon source and foaming agent, NH4Cl is used as the blowing agent, and DAH is served as collaborative carbon precursor as well as the nitrogen source for the first time. The effect of dopamine on the component, structure, and SSA of the as-prepared porous carbon materials are systematically studied. The moderate addition of dopamine, which influences the condensation and polymerization of glucose, matches better with ammonium salt decomposition. The SSA of porous carbon increases first and then decreases with the increasing amount of dopamine. In our case, the porous carbon produced with 5 wt% dopamine (PC-5) achieves the maximum SSA of up to 2593 m2/g. Accordingly, it also shows the greatest electrochemical performance. The PC-5 shows a capacitance of 96.7 F/g calculated from the discharge curve at 1 A/g. It also has a good capacitive rate capacity, the specific capacitance can still maintain 80%, even at a high current density of 10 A/g. Moreover, PC-5 exhibits a good cycling stability of 98.1% capacitive retention after 1000 cycles. The proposed method may show promising prospects for preparing porous carbon materials as advanced energy storage materials, storage, and catalyst supports.

Homogeneous metal-organic frameworks (MOFs)-based optical thin films have attracted increasing attention, since they can potentially be used as active components in optical/opt-electrical devices, and how to fabricate MOF thin films with high quality is the premise of practically using them. Herein, five fabrication methods of MOF films are systematically investigated and compared from the aspects of appearance, reflectivity, micro-morphology, surface roughness, and optical properties of the films. The famous robust Zr-based MOF, UiO-66 (UiO = University of Oslo) is chosen as a model, and the five methods are spin-coating, dip-coating, self-assembly, direct growth, and the stepwise layer by layer growth method. This study provides fundamental support for the application of MOFs in the optical field.

Optical properties, which determine the application of optical devices in different fields, are the most significant properties of optical thin films. In recent years, Metal-organic framework (MOF)-based optical thin films have attracted increasing attention because of their novel optical properties and important potential applications in optical and photoelectric devices, especially optical thin films with tunable optical properties. This study reports the first example of tuning the optical properties of a MOF-based optical thin film via post-modification. The MOF-based optical thin film was composed of NH2-MIL-53(Al) nanorods (NRs) (MIL: Materials from Institute Lavoisier), and was constructed via a spin-coating method. Three aldehydes with different lengths of carbon chains were chosen to modify the MOF optical thin film to tune their optical properties. After post-modification, the structural color of the NH2-MIL-53(Al) thin film showed an obvious change from purple to bluish violet and cyan. The reflection spectrum and the reflectivity also altered in different degrees. The effective refractive index (neff) of MOFs thin film can also be tuned from 1.292 to 1.424 at a wavelength of 750 nm. The success of tuning of the optical properties of MOFs thin films through post-modification will make MOFs optical thin films meet different needs of optical properties in various optical and optoelectronic devices.

n this paper, a non-enzymatic hydrogen peroxide (H2O2) sensor, based on Au nanoparticles (AuNPs) electrodepos‐ ited on an electrochemically reduced graphene oxide(ER‐ GO)-Nafion modified glass carbon electrode (GCE), was reported. The graphene oxide-(GO-)Nafion nanocompo‐ sites were first assembled on the GCE surface to produce a GO-Nafion electrode. GO was then electrochemically reduced to produce an ERGO-Nafion modified GCE (to be subsequently denoted as GCE/ERGO-Nafion). Afterwards, AuNPs were electrodeposited on the modified GCE to form a GCE/ERGO-Nafion/AuNPs electrode. The ERGO-Nafion nanocomposites and the electrodeposited AuNPs were characterized by infrared spectroscopy and scanning electron microscopy (SEM). The results showed that the GO was reduced successfully and the AuNPs were uniformly dispersed on the GCE/ERGO-Nafion electrode with a size of about 48nm. The cyclic voltammograms and the am‐ perometric method were used to evaluate the electrocata‐ lytic properties of the GCE/ERGO-Nafion/AuNPs electrode. The results showed that the modified electrode displayed good electrocatalytic activity in relation to the reduction of H2O2 with a detection limit of 2 μM of (H2O2) based on a signal-to-noise ratio of three. The sensor also indicated great sensitivity (574.8 μA/(mM cm2)), wide linear range (0.02-23 mM), good selectivity and reproduci‐ bility, and long-term stability.

X‐ray imaging serves a critical role across diverse sectors, including medical diagnostics, industrial surveillance, security, and space exploration. This study delves into the unique properties of a novel polar crystal, [FMPPA]ZnBr4 (FMPPA = protonated 3‐fluoro‐4‐(4‐methyl‐1‐piperazinyl)aniline), characterized by a 0D metal halide structure. This crystal features [ZnBr4]2− tetrahedra and A‐site organic amine ion [FMPPA]2+ rings. With a high photoluminescence quantum yield (≈70%) and minimal self‐absorption, [FMPPA]ZnBr4 demonstrates exceptional scintillation performance under X‐ray excitation, producing 29300 ± 600 photons MeV−1 and achieving a low detection limit of 0.352 µGyair s−1, surpassing conventional 3D perovskite nanocrystals. Beyond superior performance, this scintillator meets the demand for efficient X‐ray imaging light emitters. Moreover, it consistently achieves ≈12.5 lp mm−1 high‐resolution X‐ray imaging. Additionally, [FMPPA]ZnBr4 exhibits a nonlinear optical response, surpassing the benchmark KH2PO4 by 1.8 times. This investigation introduces a new structure framework, paving the way for the development of integrated optoelectronic materials with both nonlinear and linear optical properties. [ABSTRACT FROM AUTHOR]

Attachment insecurity has been linked to the intense grief of caregivers. However, limited studies have focused on the pre-loss grief and attachment insecurity of caregivers during end-of-life care. In this study, we examined potential correlates of caregivers' pre-loss grief, personal growth, and relationships with the patients, focusing on attachment insecurity and relational closeness. 163 primary caregivers of terminally ill cancer patients were recruited. Sociodemographic, pre-loss grief, personal growth, attachment insecurity, and emotional closeness were assessed from caregivers during the palliative care for patients. The results showed that attachment anxiety, but not attachment avoidance, was significantly associated with pre-loss grief. Emotional closeness during the care of terminal patients, but not before cancer occurrence, was significantly associated with personal growth. The present study highlights the importance of dyadic relational quality between the caregiver and the patient, which is useful in clinical settings to identify at-risk populations for caregivers' pre-loss grief. [ABSTRACT FROM AUTHOR]

Background: Some studies of dual-targeted therapy (DTT) targeting epidermal growth factor receptor (EGFR) and mesenchymal-epithelial transition (MET) have shown promising efficacy in non-small-cell lung cancer (NSCLC). Consequently, patient management following DTT resistance has gained significance. However, the underlying resistance mechanisms and clinical outcomes in these patients remain unclear. Objectives: This study aimed to delineate the molecular characteristics and survival outcomes of patients with NSCLC harboring EGFR mutations and acquired MET amplification after developing resistance to DTT. Design: We conducted a retrospective analysis of patients with NSCLC with EGFR mutations and acquired MET amplification who exhibited resistance to EGFR/MET DTT. Methods: Next-generation sequencing (NGS) was performed on patients with available tissue samples before and/or after the development of resistance to DTT. Stratified analyses were carried out based on data sources and subsequent salvage treatments. Univariate/multivariate Cox regression models and survival analyses were employed to explore potential independent prognostic factors. Results: The study included 77 NSCLC patients, with NGS conducted on 19 patients. We observed many resistance mechanisms, including EGFR-dependent pathways (4/19, 21.1%), MET-dependent pathways (2/19, 10.5%), EGFR/MET co-dependent pathways (2/19, 10.5%), and EGFR/MET-independent resistance mechanisms (11/19, 57.9%). Post-progression progression-free survival (pPFS) and post-progression overall survival (pOS) significantly varied among patients who received the best supportive care (BSC), targeted therapy, or chemotherapy (CT), with median pPFS of 1.5, 3.9, and 4.9 months, respectively (p = 0.003). Median pOS were 2.3, 7.7, and 9.2 months, respectively (p < 0.001). The number of treatment lines following DTT resistance and the Eastern Cooperative Oncology Group performance status emerged as the independent prognostic factors. Conclusion: This study revealed a heterogeneous landscape of resistance mechanisms to EGFR/MET DTT, with a similar prevalence of on- and off-target mechanisms. Targeted therapy or CT, as compared to BSC, exhibited the potential to improve survival outcomes for patients with advanced NSCLC following resistance to DTT. [ABSTRACT FROM AUTHOR]

To investigate the molecular etiology of low sperm quality in patients with intractable spermatocystitis, spermatozoa samples from patients with persistent hematospermia undergoing transurethral seminal vesiculoscopy and healthy volunteers were utilized. Spermatozoa samples were collected from the seminal vesicles through transurethral seminal vesiculoscopy or by masturbation ejaculation. Sperm quality was analyzed by a WLJY-9000 color semen analysis system. Measurement of tumor necrosis factor alpha (TNFα) and interleukin-6 (IL-6) in the seminal plasma was performed using enzyme-linked immunosorbent assay (ELISA). Measurement of H2O2 in the seminal plasma was performed with a hydrogen peroxide kit. The protein levels of nuclear factor erythroid 2-related factor 2 (Nrf2) and phosphorylated-Nrf2 (p-Nrf2) were measured by western blot analysis and immunofluorescence assays. Low sperm quality parameters and increased levels of inflammatory cytokines (TNFα, IL-6, and H2O2) in the seminal plasma were detected among the semen samples from the patients with persistent hematospermia. Nrf2 and p-Nrf2 were strongly expressed in the nucleus and periphery of human sperm cells, according to the results of the immunofluorescence assays. The protein levels of Nrf2 and p-Nrf2 were significantly lower in the spermatozoa samples from patients with persistent hematospermia than in those from healthy volunteers with normal sperm motility. The results suggested that Nrf2 signaling might play a role in the low sperm quality of patients with intractable spermatocystitis. [ABSTRACT FROM AUTHOR]

In this note, we study some approximation properties on a class of special Lototsky–Bernstein bases. We focus on approximation of | x | on [ − 1 , 1 ] by an approximation process generated from fixed points on Lototsky–Bernstein bases. Our first result shows that the approximation procedure p n (x) to | x | preserves good shapes on [ − 1 , 1 ] . Moreover, some convergence results and inequalities are derived. Our second main result states that the rate convergence of the approximation is O (n − 2) . [ABSTRACT FROM AUTHOR]

BACKGROUND: Rice taste is closely associated with endosperm composition, which varies among different rice layers. Although clarifying the relationship between this difference and nutritional taste can guide rice breeding and cultivation practices, research on this topic is limited. RESULTS: Here, typical rice varieties having excellent and poor taste characteristics were selected to analyze the distribution characteristics and differences of their components. The varieties with excellent taste exhibited lower apparent amylose content (AAC) and protein content (PC), lesser short‐chain (Fa) and long‐chain (Fb3) amylopectin (AP) and more medium‐chain (Fb1+2) AP, higher long‐to‐short chain ratio (Fa:Fb3), and higher nitrogen (N), magnesium (Mg) and calcium (Ca) content in layer 1 (L1) than the varieties with poor taste. Layer 2 (L2) played a key role in AAC and PC regulation in the varieties with excellent taste by reducing AAC and appropriately increasing PC, consequently improving rice taste. AP structure in layer 3 (L3) substantially affected the taste of the two types of varieties. The mineral content was the highest in L1, and increased potassium (K), Ca, and Mg content improved taste in all varieties. CONCLUSION: AAC in each layer contributes to rice taste. PC and minerals primarily act on L1 and L2, whereas AP acts on L2 and L3. Therefore, the endosperm formation process should be exploited for improving rice taste. Furthermore, key resources and cultivation should be identified and regulated, respectively, to improve rice taste. © 2023 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]