15 results on '"Cheong, Pedro"'
Search Results
2. An Ingenious Multiport Interferometric Front-End for Concurrent Dual-Band Transmission.
- Author
-
Cheong, Pedro, Tu, Mengting, Choi, Wai-Wa, and Wu, Ke
- Subjects
- *
MULTIPORT networks , *RADIO frequency , *AMPLITUDE modulation , *MATRIX inversion , *INTERSYMBOL interference , *SCHOTTKY barrier diodes - Abstract
This article proposes and presents an innovative approach to realizing the concurrent dual-band transmission with only a single front-end and local oscillator at radio frequency (RF). Fundamentally, the proposed concurrent dual-band front-end is based on the conventional multiport interferometric architecture for single-band operation. Nevertheless, the conventional variable loads are replaced by diode networks with IF input signals to produce the RF signals at their designated center frequencies. Furthermore, due to the linear characteristics of a multiport network, the signals with different data contents will be mixed into both RF channels. To this end, an inverse matrix operation is applied to reversely convert the original data streams before the modulations of IF input signals. As a result, the two original data streams can be effectively modulated into specific RF channels (for transmission) with minimal interchannel interferences based on this configuration. In addition to the theoretical analyses, this innovative concurrent dual-band transmitting front-end has been investigated and verified with $M$ -quadrature amplitude modulation (QAM) signals in simulations and experiments. All outcomes demonstrate excellent performances in concurrent dual-band transmission with significant reductions in both size and biasing power. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
3. A novel microstrip square-loop dual-mode bandpass filter with simultaneous size reduction and spurious response suppression
- Author
-
Fok, Si-Weng, Cheong, Pedro, Tam, Kam-Weng, and Martins, Rui P.
- Subjects
Electric filters, Bandpass -- Design and construction ,Resonators -- Design and construction ,Circuit design -- Analysis ,Circuit designer ,Integrated circuit design ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
In this paper, a new capacitively stepped-impedance resonator (CSIR) is proposed to develop the microstrip square-loop dual-mode bandpass filter. Using this new design, simultaneous size reduction and spurious response suppression for the dual-mode bandpass filter can be achieved. An analytical formulation of this novel resonator is given in order to elucidate the spurious frequencies relocation design. Together with this formulation, a generalized dual-mode bandpass filter model is developed so as to ease the analysis of transmission zero and insertion loss. A prototype filter is designed at 900 MHz with 1.5% fractional bandwidth. Significant spurious suppressions up to 33 and 35 dB are measured at 1.8 and at 2.7 GHz, respectively. A circuitry size reduction of 54% is achieved when compared with that of the conventional structure. Moreover, the CSIR allows frequency tuning and, thus, a varactor-tuned filter is designed and a measured tunable center frequency between 1.5-1.62 GHz is demonstrated. Utilizing the proposed structure, not only size reduction, as well as spurious response suppression, but also center frequency tuning can be achieved. Index Terms--Dual-mode resonator, insertion loss, size reduction, spurious response suppression.
- Published
- 2006
4. Miniaturized parallel coupled-line bandpass filter with spurious-response suppression
- Author
-
Cheong, Pedro, Fok, Si-Weng, and Tam, Kam-Weng
- Subjects
Electric filters -- Research ,Electric filters, Bandpass -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
A novel miniaturized parallel coupled-line bandpass filter with suppression of second and third harmonic frequencies is demonstrated in this paper. This new filter is based on the capacitive termination on the conventional parallel coupled line to achieve size minimization, while the spurious responses are eliminated by the over-coupling approach. These features offer the classical parallel coupled-line bandpass filter simultaneous compactness and wide stopband performance. The simulations and measurements of a 900-MHz prototype bandpass filter are presented. The measured results agree well with the simulation. Compared with the conventional parallel coupled-line bandpass filter, the measured second and third spurious responses are suppressed to -64 and -55 dB, respectively. In addition, the circuitry size of the prototype filter can be reduced up to 25%. Index Terms--Capacitive termination, parallel coupled line, spurious-response suppression, transmission zeros.
- Published
- 2005
5. Full-Range CSRR-Based Angular Displacement Sensing With Multiport Interferometric Platform.
- Author
-
Cheong, Pedro and Wu, Ke
- Subjects
- *
REFLECTANCE , *WIRELESS sensor networks - Abstract
This article presents a compact, low-power, yet efficient wireless sensing platform to detect the angular displacement of an object with a reoriented complementary split-ring resonator (RCSRR). This RCSRR sensor belongs to the CSRR family, consisting of a 90° feedline on the stator and slots on the rotor. The reflected signal of the sensor experiences a monolithic phase response to the angular displacement because of its asymmetricity. In the platform, the sensor acts as a variable load of the multiport interferometer. The multiport converts the reflected signal into dc voltage readouts representing the real and imaginary parts of the phase of the reflection coefficient. Moreover, this platform operates at a fixed frequency (i.e., 2.4 GHz), and it requires only a biasing power as low as −30 dBm. This platform prevents ponderous system architecture and power consumption. This innovative wireless sensing platform has been designed, implemented, and tested. The experimental results show good agreement with their theoretical counterparts, and the standard deviation of angular displacement uncertainty is only $10^\prime $. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
6. Compendious Concurrent Dual-Band Receiver Based on Multiport Interferometric Architecture.
- Author
-
Cheong, Pedro and Wu, Ke
- Subjects
- *
ANALOG-to-digital converters , *SIGNAL processing , *BIT error rate , *INTERSYMBOL interference , *SCHOTTKY barrier diodes , *ALGORITHMS - Abstract
A distinct usage of the conventional multiport architecture is introduced in this work to explore the compendious scheme of a concurrent dual-band interferometric receiver. Dual RF signals at individual frequency channels are received simultaneously, and only a single low-power local oscillator (LO) source is deployed for frequency translation or conversion to the same intermediate frequency (IF) band. Although these signals are spectrally overlapped, they can be extracted with a simple and efficient algorithm with good channel-to-channel isolations. Compared to the conventional multiport configuration, the power detectors are replaced by analog-to-digital converters (ADCs) to process the signals in this proposed scheme. The underlying physics of the concurrent receiving operation is explained and derived analytically. Some experiments are also presented to investigate various performance indexes, including signal linearity, noise behavior, interchannel interference, and so forth. Lastly, multiple $M$ -quadratic-amplitude modulation (QAM) signals are applied to evaluate the communication behavior of the proposed receiver architecture. Distortions due to frequency drift, channel imbalance, and in-phase and quadrature (IQ) imbalance are studied, and bit-error-rates (BER) are measured and compared with their theoretical counterparts. All obtained results confirm that the proposed interferometric receiver provides good communication performances. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
7. Realization of Extremely High and Low Impedance Transforming Ratios Using Cross-Shaped Impedance Transformer.
- Author
-
Zhu, Hong-Xu, Cheong, Pedro, Ho, Sut-Kam, Tam, Kam-Weng, and Choi, Wai-Wa
- Abstract
In this brief, the design methodology of microstrip impedance transformers with extreme (i.e., extremely high and extremely low) impedance transforming ratios is proposed by deploying the cross-shaped structure (CSS) configuration. The proposed impedance transformer can significantly eliminate the line width limitation of traditional quarter-wave impedance transformer and hence an extremely wide range of impedance transformation can be easily realized. At the same time, the impedance transformer provides a good frequency selectivity, especially in the narrowband regime. To demonstrate the outstanding performance of proposed CSS impedance transformer, two examples, with the load-to-source impedances of 2000-to-50 $\Omega $ and 5-to- $50~\Omega $ , respectively, are presented and prototyped. The measurement results are in good agreement with the simulated counterparts and hence, the outstanding performance of extreme impedance transforming ratios is validated. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
8. Tilted bi‐sense circularly‐polarized antenna and its application for radio frequency identification system.
- Author
-
Zhang, Wen‐Hai, Tam, Kam‐Weng, Lu, Wen‐Jun, Cheong, Pedro, Choi, Wai‐Wa, and Ho, Sut‐Kam
- Subjects
RADIO antennas ,RADIO frequency identification systems ,SHORTWAVE radio ,SINE function ,MICROSTRIP antennas ,RADIO frequency - Abstract
A tilted bi‐sense circularly polarized (CP) antenna and its application for UHF radio frequency identification (RFID) system is proposed. A planar concial monopole working as the electric dipole is designed at first. When a shorting pin is added, a loop radiator would be generated, and thus a pair of orthogonally oriented complementary dipoles is realized. In this way, both right‐handed circularly polarized (RHCP) and left‐handed circularly polarized waves (LHCP) are generated simultaneously in tilted directions within one hemisphere. Then, closed‐form formulas are derived to reveal the tunability mechanism of bi‐sense property and provide a design guideline for system application. It is demonstrated that flare angle of conical monopole has a linear relationship and sine function to CP beam direction and 3‐dB axial ratio (AR) beamwidth, respectively. Finally, antenna prototypes are fabricated and tested for validation. It is also demonstrated that at the tilted direction of θ = ± 45°, a 3‐dB AR bandwidth of 4.9%, and gain up to 5 dB are realized. Comparing with conventional microstrip patch antenna, an enhanced reading range over 5 m can be obtained in the tilted range from 40° to 75° and − 75° to −40° in UHF RFID sytem application. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
9. An Angular Displacement Sensor Based on Microstrip Wideband Impedance Transformer With Quasi-Chebyshev Frequency Response.
- Author
-
Zhu, Hong-Xu, Cheong, Pedro, Tam, Kam-Weng, Ho, Sut-Kam, and Choi, Wai-Wa
- Abstract
In this paper, the design methodology of a microstrip angular displacement sensor based on an impedance transformer with a quasi-Chebyshev frequency response is proposed. This sensor with impedance transforming function can realize the angular displacement detection by bandwidth sensing, and matching sensing simultaneously. The insertion loss in stopband achieves 24.9 dB to 32.6 dB with an average bandwidth selectivity of 2.25 MHz/degree of the sensor centered at 2.4 GHz with two poles of 1.71 GHz and 2.81 GHz. Meanwhile, the average matching level of return loss for displacement sensitivity are 0.18 dB/degree and 0.15 dB/degree, respectively. It is the first time to apply an impedance transformer into the angular displacement sensor design for both bandwidth and matching level sensing among reviewed literatures. In this design, the load-to-source impedance transformation is designed for 250-to- $50~\Omega $ , and by adding a rotated stub on the proposed microstrip transformer, the sensing function is developed with angular displacement. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
10. Design of Dual-Band Bandpass Filters With Fixed and Reconfigurable Bandwidths Based on Terminated Cross-Shaped Resonators.
- Author
-
Bi, Xiao-Kun, Cheng, Teng, Cheong, Pedro, Ho, Sut-Kam, and Tam, Kam-Weng
- Abstract
Based on a novel microstrip terminated cross-shaped resonator (TCSR), the dual-band bandpass filters (DB-BPFs) with fixed and reconfigurable bandwidths are proposed in this brief. In addition to the basic TCSR’s three poles and four zeros, the extra four poles and three zeros can be introduced with the help of a pair of symmetrical parallel-coupled lines and open-ended stubs. Therefore, a planar DB-BPF with multiple transmission poles and zeros can be realized. To achieve the reconfigurable bandwidths, a capacitor is inserted into the basic TCSR’s lower stub. It is found that the lower bandedge of the first passband can be tuned while the other three bandedges are kept unchanged. Two prototypes, including fixed-bandwidth filter (Filter I) with 3-dB fractional bandwidths (FBWs) of 20.8% and 17.3%, and reconfigurable-bandwidth filter (Filter II) with 3-dB FBW variation from 22.5% to 34.7% for the first passband and 19.8% for the second passband, are designed, fabricated, and experimentally characterized. The experimental characterizations of these two filters verify the proposed design. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
11. Nonlinear Communication System With Harmonic Diversity.
- Author
-
Cheong, Pedro, Wu, Ke, and Tam, Kam-Weng
- Subjects
- *
TELECOMMUNICATION systems , *WIRELESS communications , *RADIO frequency , *SIGNAL-to-noise ratio , *INTERMODULATION - Abstract
This paper presents the concept and demonstration of harmonic diversity for wireless communication, which makes use of multiple harmonic radio frequency (RF) channels with respect to the carrier frequency. Rather than frequency and space diversities widely used today to improve multipath fading, signal quality and spectral efficiency, the proposed scheme does not require multiple RF transceiver front-ends. The advantages of inherent RF device nonlinear characteristics are harnessed to produce and process harmonics within single transceiver. Even though distinct harmonic channels will exhibit different order of phase shifts, the analysis shows that such phase offsets can be compensated by adjusting the phase of local oscillator (LO) at receiver end. Extending the framework of the Shannon theorem, an M-channel harmonic communication system is shown to reduce the minimum required signal-to-noise ratio (SNR) at the input of receiver by M-times. In addition, this work indicates that the power consumption of transmitter can be significantly reduced up to 66% than the conventional ones. Through the analysis of channel capacity, the harmonic system is proved to outperform the single channel counterpart especially when SNR is low. To validate the correctness of the proposed concept, a series of experiments are carried out to emulate the developed theoretical models. For instance, a three-channel harmonic communication system is prototyped, involving certain RF harmonic components designed for demonstration. The retrieved signal strengths are examined with different phase setting of receiving LO, and various modulation techniques are applied for estimating the system performances. All measured results are in agreement with their simulated counterparts, thereby demonstrating the correctness and usefulness of the proposed theories and techniques for nonlinear communication systems of harmonic diversity. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
12. A Highly Integrated Antenna-Triplexer With Simultaneous Three-Port Isolations Based on Multi-Mode Excitation.
- Author
-
Cheong, Pedro, Chang, Ka-Fai, Choi, Wai-Wa, and Tam, Kam-Weng
- Subjects
- *
ANTENNAS (Electronics) , *MULTIPLEXING equipment , *SLOT antennas , *INTEGRATED circuit design , *PRINTED circuits - Abstract
In this communication, a novel highly integrated antenna-triplexer on a two-layer printed circuit board is proposed for multiband communication systems. This integrated three-port component operated at triple frequency bands (0.85, 1.65 and 2.45 GHz) simultaneously utilizes a single slot antenna and its rectangular loop as the radiating elements. Good three-port isolations are achieved by the multi-mode excitations including even, odd and bi-directional modes. These modes are intrinsically orthogonal and therefore the isolations are guaranteed. Compared with the conventional counterparts that use additional bandpass filters to assure the port isolations, the proposed antenna-triplexer preserves the simplicity and compactness of the antenna itself, and it is suitable for the practical portable applications. To demonstrate the significance of this new antenna-triplexer, a prototype measured with compact size is implemented and the experimental results show the good agreements with the simulations. The antenna gains of 0.85, 4.00 and 4.23 dBi are obtained and an average isolation in three ports is as good as 22.7 dB at operating frequencies. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
13. A ZigBee-Based Wireless Sensor Network Node for Ultraviolet Detection of Flame.
- Author
-
Cheong, Pedro, Chang, Ka-Fai, Lai, Ying-Hoi, Ho, Sut-Kam, Sou, Iam-Keong, and Tam, Kam-Weng
- Subjects
- *
WIRELESS sensor networks , *ULTRAVIOLET detectors , *OPTOELECTRONIC devices , *PEER-to-peer architecture (Computer networks) , *WIRELESS sensor nodes , *SIGNAL processing , *FIRE prevention - Abstract
This paper describes a ZigBee-based wireless sensor network node for the ultraviolet (UV) detection of flame. The sensor node is composed of a ZnSSe UV photodetector, a current-sensitive front end including a high-gain current-to-voltage amplifier with 120 dB and a logarithm converter, and a transceiver operated at a 2.4-GHz industrial, scientific, and medical band. A passive photodetector is designed to have a cutoff at 360 nm and convert the UV emission of flame into picoamperes. Including mixed signal processing and ZigBee transmission, the speed of flame detection is as fast as 70 ms. The sensor node consumes only an average of 2.3 mW from a 3.3-V supply. The performance of a prototype sensor node was verified when the luminous flame was imaged onto the sensor node with different angles ranging from -30^\circ to 30 ^\circ and distances of 0.1, 0.2, and 0.3 m enabling effective fire safety applications. [ABSTRACT FROM PUBLISHER]
- Published
- 2011
- Full Text
- View/download PDF
14. A Novel Microstrip Square-Loop Dual-Mode Bandpass Filter With Simultaneous Size Reduction and Spurious Response Suppression.
- Author
-
Si-weng Fok, Cheong, Pedro, Kam-weng Tam, and Martins, Rui P.
- Subjects
- *
BANDPASS filters , *ELECTRIC resonators , *BROADBAND communication systems , *SIZE reduction of materials , *AUDIO equipment - Abstract
In this paper, a new capacitively stepped-impedance resonator (CSIR) is proposed to develop the microstrip square-loop dual-mode bandpass filter. Using this new design, simultaneous size reduction and spurious response suppression for the dual-mode bandpass filter can be achieved. An analytical formulation of this novel resonator is given in order to elucidate the spurious frequencies relocation design. Together with this formulation, a generalized dual-mode bandpass filter model is developed so as to ease the analysis of transmission zero and insertion loss. A prototype filter is designed at 900 MHz with 1.5% fractional bandwidth. Significant spurious suppressions up to 33 and 35 dB are measured at 1.8 and at 2.7 GHz, respectively. A circuitry size reduction of 54% is achieved when compared with that of the conventional structure. Moreover, the CSIR allows frequency tuning and, thus, a varactor-tuned filter is designed and a measured tunable center frequency between 1.5-1.62 GHz is demonstrated. Utilizing the proposed structure, not only size reduction, as well as spurious response suppression, but also center frequency tuning can be achieved. [ABSTRACT FROM AUTHOR]
- Published
- 2006
- Full Text
- View/download PDF
15. A Compact Microstrip Square-Loop Dual-Mode Balun-Bandpass Filter With Simultaneous Spurious Response Suppression and Differential Performance Improvement.
- Author
-
Cheong, Pedro, Lv, Ting-Shan, Choi, Wai-Wa, and Tam, Kam-Weng
- Abstract
A microstrip balun-bandpass filter (BPF) using capacitively loaded square-loop dual-mode resonator is proposed; it realizes not only simultaneous size reduction and spurious response suppression in filtering but also overall good differential performance of the balun. The phase and amplitude imbalance improvements due to the loaded resonator are also studied and verified by a prototype balun-BPF operated at 2.55 GHz with 3.5% fractional bandwidth. The experimental results reveal that size reduction of 47% and spurious suppressions of 30 dB beyond 1.5 f 0 are achieved as compared to that of the conventional structure. The loading effect of the prototype balun-BPF reports 180.8^\circ and 0.97 dB as phase and amplitude imbalances at the operating frequency respectively. [ABSTRACT FROM PUBLISHER]
- Published
- 2011
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.