Search

Abstract Soil organic carbon (C) and aggregates are the important components of soil fertility and the foundation of sustainable agriculture. The storage and protection of SOC in aggregates is widely regarded as the material basis of soil organic C accumulation. However, current understanding of soil aggregate and its associated organic C is insufficient to elucidate the regulation mechanism of soil organic C. A nine-year field experiment including chemical fertilizer (FR) and organic manure (OM) treatments was set up in the eastern plain of Funiu Mountain, central China. Using chemical analysis, physical sieving as well as nuclear magnetic resonance (NMR) methods, we mainly probed into the response of soil organic C concentration and composition, and C functional groups, water-stable aggregates to different treatments. Furthermore, scanning electronic microscopy (SEM) and partial least square structural equation modelling (PLS-SEM) was conducted to characterise the different size aggregates and to analyse the mechanism of soil organic C accumulation and stabilisation at aggregate scales. After nine years of farming, OM treatment substantially increased soil organic C content (by 3.77 g kg−1) and significantly enhanced the formation of macro-aggregates (> 250 μm), while FR had no significant influence on soil organic C. At the aggregate scale, the amounts of soil organic C, C physical fractions (particulate and mineral-associated organic C), total nitrogen and microbial biomass carbon associated in macro-aggregates (> 250 μm) were obviously higher than that in micro-aggregates and silt + clay fraction, and OM treatment greatly increased the accumulation of soil organic C and its components in macro-aggregates. Moreover, microbial biomass carbon (MBC) amounts in aggregates were remarkably increased (27–116%) by the application of OM. And MBC had a positively effect on the physical fractions of SOC but not on the C chemical structure within aggregates. The present study indicated that soil organic C accumulation mainly rely on macro-aggregates (> 250 μm). Intra–particulate organic carbon (POC) and mineral-associated organic carbon (MOC) within macro-aggregates played an important role in soil organic C accumulation. Meanwhile, soil microbes were a driving force for the accumulation of soil organic C physical fractions (POC and MOC). We concluded that OM treatment accelerated the synergistic process between organic C sequestration and soil aggregation, and showed great potential to increase soil organic C accumulation.

Squirrels of temperate zones commonly store nuts or seeds under leaf litter, in hollow logs, or even in holes in the ground; however, in the humid rainforests of Jianfengling in Hainan, South China, we show that some flying squirrels cache elliptical or oblate nuts by hanging them securely in vegetation. These small flying squirrels were identified as Hylopetes phayrei electilis (G. M. Allen, 1925) and Hylopetes alboniger (Hodgson, 1870), in video clips captured of their behavior around focal nuts. Squirrels chewed grooves encircling ellipsoid nuts or distributed on the bottoms of oblate nuts, and then used these grooves to fix nuts tightly between small twigs 0.1–0.6 cm in diameter that were connected at angles of 25–40°. The grooves carved on the nuts (concave structure) connected with Y-shaped twigs (convex structure) and thus firmly affixed the nuts to the plant in a way similar to a mortise-tenon joint used in architecture and carpentry. Cache sites were on small plants located 10–25 m away from the closest potentially nut-producing tree, a behavior that likely reduces the discovery and consumption of the nuts by other animals. The adaptive squirrel behavior that shapes and fits nuts between twigs seems to be directed at providing more secure storage that increases food supply during dry periods in a humid tropical rainforest. In addition to providing such benefits for the squirrels, we suggest that this behavior also impacts the distribution of tree species in the forest.

Geopolymer grouting material is a new kind of grouting material. The usage of coal gangue as raw material to prepare geopolymer grouting material can effectively solve the accumulation of coal gangue. Meanwhile, it can reduce the pollution of different grouting materials in the use and production process. These all make a great significance to the environment and resources. This review summarizes the research on coal gangue-based geopolymer grouting materials in recent years, introduces the selection of raw materials, preparation conditions and performance enhancement methods of coal gangue-based geopolymer grouting materials. The current problems of grouting materials are summarized and analyzed.

To simply, quickly, and efficiently separate circulating tumor cells from blood has always been an enormous challenge. Leveraging the principle of inertial focusing, we here designed a simply structured microfluidic chip that maintained excellent CTC separation efficiency with high robustness and low velocity sensitivity across a broad velocity range. The parameter configuration of the chip was systematically examined, especially the most influential parameters such as the arc radius and arc angle. With optimal parameters, the designed chip achieved an outstanding particle separation efficiency of 99.8% and, more importantly, enabled the efficient separation and enrichment of CTCs in blood samples. This design can be readily integrated with other functional modules for further sample processing, serving as a promising tool for cancer diagnosis and therapeutics.

Microporous carbon attracts attention as an electrode material for supercapacitors. However, a large number of deep and distorted mesoporous and macroporous structures are usually created by non-uniform etching, resulting in underutilized internal space. Homogeneous activation has been considered by researchers as a necessary condition for the formation of interconnected microporous structures in carbon materials. Herein, a simple strategy of hydrothermal introduction of defects followed by homogeneous activation for the preparation of microporous carbon was developed for the synthesis of electrode materials for high-performance supercapacitors. The optimized sample with defect-enriched microporous structure and large specific surface area has a specific capacity of 315 F g−1 (1 A g−1) in KOH solution, and the assembled symmetric supercapacitor achieves a high energy density of 7.3 Wh kg−1 at a power density of 250 W kg−1. This work is interesting because it not only demonstrates that rational design of electrode materials is important to boost the performance of supercapacitors, but also provides inspiration for the design of efficient supercapacitors in the future.

In this paper, the influence of calcium on coal gangue and fly ash geopolymer is explored, and the problem of low utilization of unburned coal gangue is analyzed and solved. The experiment took uncalcined coal gangue and fly ash as raw materials, and a regression model was developed with the response surface methodology. The independent variables were the CG content, alkali activator concentration, and Ca(OH)2 to NaOH ratio (CH/SH). The response target value was the coal gangue and fly-ash geopolymer compressive strength. The compressive strength tests and the regression model obtained by the response surface methodology showed that the coal gangue and fly ash geopolymer prepared with the content of uncalcined coal gangue is 30%, alkali activator content of 15%, and the value of CH/SH is 1.727 had a dense structure and better performance. The microscopic results demonstrated that the uncalcined coal gangue structure is destroyed under an alkali activator’s action, and a dense microstructure is formed based on C(N)-A-S-H and C-S-H gel, which provides a reasonable basis for the preparation of geopolymers from the uncalcined coal gangue.

Laser plasma acceleration has made remarkable progress in the last few decades, but it also faces many challenges. Although the high gradient is a great potential advantage, the beam quality of the laser accelerator has a certain gap, or it is different from that of traditional accelerators. Therefore, it is important to explore and utilize its own features. In this article, some recent research progress on laser proton acceleration and its irradiation application, which was carried out on the compact laser plasma accelerator (CLAPA) platform at Peking University, have been introduced. By combining a TW laser accelerator and a monoenergetic beamline, proton beams with energies of less than 10 MeV, an energy spread of less than 1%, and with several to tens of pC charge, have been stably produced and transported in CLAPA. The beamline is an object–image point analyzing system, which ensures the transmission efficiency and the energy selection accuracy for proton beams with large initial divergence angle and energy spread. A spread-out Bragg peak (SOBP) is produced with high precision beam control, which preliminarily proved the feasibility of the laser accelerator for radiotherapy. Some application experiments based on laser-accelerated proton beams have also been carried out, such as proton radiograph, preparation of graphene on SiC, ultra-high dose FLASH radiation of cancer cells, and ion-beam trace probes for plasma diagnosis. The above applications take advantage of the unique characteristics of laser-driven protons, such as a micron scale point source, an ultra-short pulse duration, a wide energy spectrum, etc. A new laser-driven proton therapy facility (CLAPA II) is being designed and is under construction at Peking University. The 100 MeV proton beams will be produced via laser–plasma interaction by using a 2-PW laser, which may promote the real-world applications of laser accelerators in malignant tumor treatment soon.

Compared with traditional two-dimensional culture, a three-dimensional (3D) culture platform can not only provide more reliable prediction results, but also provide a simple, inexpensive and less time-consuming method compared with animal models. A direct in vitro model of the patient’s tumor can help to achieve individualized and precise treatment. However, the existing 3D culture system based on microwell arrays has disadvantages, such as poor controllability, an uneven spheroid size, a long spheroid formation time, low-throughput and complicated operation, resulting in the need for considerable labor, etc. Here, we developed a new type of microdevice based on a 384-well plate/96-well plate microarray design. With our design, cells can quickly aggregate into clusters to form cell spheroids with better roundness. This design has the advantage of high throughput; the throughput is 33 times that of a 384-well plate. This novel microdevice is simple to process and convenient to detect without transferring the cell spheroid. The results show that the new microdevice can aggregate cells into spheroids within 24 h and can support drug and radiation sensitivity analyses in situ in approximately one week. In summary, our microdevices are fast, efficient, high-throughput, simple to process and easy to detect, providing a feasible tool for the clinical validation of individualized drug/radiation responses in patients.

The accurate estimation of the soil organic carbon (SOC) sequestration rate is very important for studying farmland soil fertility and environmental effects. In this research, a typical fluvor-aquic soil area, Fengqiu county, located in the Yellow River basin of the Huang-Huai-Hai Plain of China, was chosen as a study area. The physicochemical properties of 70 soil samples collected from the surface layer (at a depth of 0–20 cm) in 2011 were analyzed, and related data about the sampling sites were also collected from the Second State Soil Survey of China (SSSSC), conducted in 1981. The results revealed that the SOC density (SOCD) in Fengqiu county increased greatly on a spatio-temporal scale. The average SOCD increased from 15.66 to 26.09 Mg ha−1, and the SOCD sequestration rate was more than 0.20 Mg C ha−1 year−1 in most regions. Few areas showed lost carbon in the past 30 years (1981–2011). In addition, the study suggested that all the areas present strong carbon sequestration potential in the coming decades from 2011, and the carbon sequestration potential was mainly between 32–40 Mg ha−1. Finally, the SOCD sequestration rate was not only affected by natural factors, such as soil type and pH, but also positively correlated with artificial soil management measures, such as fertilization and straw returning. Therefore, we concluded that the farmland in Fengqiu county showed significant carbon sequestration characteristics in the past 30 years (1981–2011). Considering that soil has a great potential for carbon sequestration in the future, the trend of carbon sequestration in farmland soil might continue for a period of time. Furthermore, the results of this study emphasized that strengthening soil scientific management may play a positive role in improving soil carbon sequestration.

Cancer stem cell (CSC) is thought to be the major cause of radio-resistance and relapse post radiotherapy (RT). Recently ultra-high dose rate “FLASH-RT” evokes great interest for its decreasing normal tissue damages while maintaining tumor responses compared with conventional dose rate RT. However, the killing effect and mechanism of FLASH irradiation (FLASH-IR) on CSC and normal cancer cell are still unclear. Presently the radiation induced death profile of CSC and normal cancer cell were studied. Cells were irradiated with FLASH-IR (∼109 Gy/s) at the dose of 6–9 Gy via laser-accelerated nanosecond particles. Then the ratio of apoptosis, pyroptosis and necrosis were determined. The results showed that FLASH-IR can induce apoptosis, pyroptosis and necrosis in both CSC and normal cancer cell with different ratios. And CSC was more resistant to radiation than normal cancer cell under FLASH-IR. Further experiments tracing lysosome and autophagy showed that CSCs had higher levels of lysosome and autophagy. Taken together, our results suggested that the radio-resistance of CSC may associate with the increase of lysosome-mediated autophagy, and the decrease of apoptosis, necrosis and pyroptosis. To our limited knowledge, this is the first report shedding light on the killing effects and death pathways of CSC and normal cancer cell under FLASH-IR. By clarifying the death pathways of CSC and normal cancer cell under FLASH-IR, it may help us improve the understanding of the radio-resistance of CSC and thus help to optimize the future clinical FLASH treatment plan.

Ultra-high dose rate FLASH irradiation (FLASH-IR) has got extensive attention since it may provide better protection on normal tissues while maintain tumor killing effect compared with conventional dose rate irradiation. The FLASH-IR induced protection effect on normal tissues is exhibited as radio-resistance of the irradiated normal cells, and is suggested to be related to oxygen depletion. However, the detailed cell death profile and pathways are still unclear. Presently normal mouse embryonic fibroblast cells were FLASH irradiated (∼109 Gy/s) at the dose of ∼10–40 Gy in hypoxic and normoxic condition, with ultra-fast laser-generated particles. The early apoptosis, late apoptosis and necrosis of cells were detected and analyzed at 6, 12, and 24 h post FLASH-IR. The results showed that FLASH-IR induced significant early apoptosis, late apoptosis and necrosis in normal fibroblast cells, and the apoptosis level increased with time, in either hypoxic or normoxic conditions. In addition, the proportion of early apoptosis, late apoptosis and necrosis were significantly lower in hypoxia than that of normoxia, indicating that radio-resistance of normal fibroblast cells under FLASH-IR can be enhanced by hypoxia. To further investigate the apoptosis related profile and potential pathways, mitochondria dysfunction cells resulting from loss of cytochrome c (cyt c–/–) were also irradiated. The results showed that compared with irradiated normal cells (cyt c+/+), the late apoptosis and necrosis but not early apoptosis proportions of irradiated cyt c–/– cells were significant decreased in both hypoxia and normoxia, indicating mitochondrial dysfunction increased radio-resistance of FLASH irradiated cells. Taken together, to our limited knowledge, this is the first report shedding light on the death profile and pathway of normal and cyt c–/– cells under FLASH-IR in hypoxic and normoxic circumstances, which might help us improve the understanding of the FLASH-IR induced protection effect in normal cells, and thus might potentially help to optimize the future clinical FLASH treatment.

Circulating tumor cells (CTCs) are tumor cells that escaped from the primary tumor or the metastasis into the blood and they play a major role in the initiation of metastasis and tumor recurrence. Thus, it is widely accepted that CTC is the main target of liquid biopsy. In the past few decades, the separation of CTC based on the electrochemical method has attracted widespread attention due to its convenience, rapidness, low cost, high sensitivity, and no need for complex instruments and equipment. At present, CTC detection is not widely used in the clinic due to various reasons. Point-of-care CTC detection provides us with a possibility, which is sensitive, fast, cheap, and easy to operate. More importantly, the testing instrument is small and portable, and the testing does not require specialized laboratories and specialized clinical examiners. In this review, we summarized the latest developments in the electrochemical-based CTC detection and point-of-care CTC detection, and discussed the challenges and possible trends.

Comprehensive studies have investigated the prognostic and clinicopathological value of tumor-associated macrophages (TAMs) in gastric cancer patients, yet results remain controversial. Therefore, we performed a meta-analysis to clarify this issue.PubMed, Embase, and the Cochrane Library databases were searched to identify eligible studies. We extracted hazard ratios (HRs) and odds ratios (ORs) with their corresponding 95% confidence intervals (95% CIs) to estimate the effect sizes. In addition, subgroup analysis and sensitivity analysis were also conducted.A total of 19 studies involving 2242 patients were included. High generalised TAMs density was significantly associated with poor overall survival (OS) (HR 1.49, 95% CI 1.15-1.95). Subgroup analysis revealed that CD68+ TAMs had no significant effect on OS (HR 1.38, 95% CI 1.00-1.91). High M1 TAMs density was correlated with better OS (HR 0.45, 95% CI 0.32-0.65). By contrast, high density of M2 TAMs was correlated with a poor prognosis for OS (HR 1.48, 95% CI 1.25-1.75). Furthermore, high M2 TAMs density was correlated with larger tumor size, diffuse Lauren type, poor histologic differentiation, deeper tumor invasion, lymph node metastasis, and advanced TNM stage.Overall, this meta-analysis reveal that although CD68+ TAMs infiltration has the neutral prognostic effects on OS, the M1/M2 polarization of TAMs are predicative factor of prognosis in gastric cancer patients.

Background: The prognostic significance of proliferating cell nuclear antigen (PCNA) expression in gastric cancer has long been assessed, yet results remain controversial. Therefore, we performed a meta-analysis to assess the prognostic value and clinicopathological significance of PCNA in gastric cancer. Methods: A systematic literature search of PubMed, EMBASE, and the Cochrane Library databases was conducted. Summary odds ratios (ORs) and hazard ratios (HRs) with 95% confidence intervals (CIs) were calculated to investigate the correlations between PCNA expression and clinicopathological features, overall survival (OS), and disease-free survival (DFS). Results: A total of 19 studies involving 2,852 participants were included in our analysis. The pooled HR indicated that high PCNA expression was significantly associated with poor OS (HR 1.66, 95% CI 1.32-2.08) and DFS (HR 1.81, 95% CI 1.40-2.36). Subgroup analysis revealed that the association between PCNA and OS was also significant in Asian and European patients. In addition, the pooled ORs showed that high PCNA expression was significantly associated with deeper tumor invasion (OR 2.37, 95% CI 1.71-3.27), lymph node metastasis (OR 2.49, 95% CI 1.85-3.35), and advanced stage cancer (OR 1.89, 95% CI 1.36-2.63). Conclusion: Our meta-analysis indicates that high PCNA expression might be a prognosticator of poor survival and a promising therapeutic target for gastric cancer patients. [ABSTRACT FROM AUTHOR]

The microstructure and mechanical properties of pure W, sintered and swaged W-1.5ZrO2 composites after 1.5 × 1015 Au+/cm2 radiation at room temperature were characterized to investigate the impact of the ZrO2 phase on the irradiation resistance mechanism of tungsten materials. It can be concluded that the ZrO2 phase near the surface consists of two irradiation damage layers, including an amorphous layer and polycrystallization regions after radiation. With the addition of the ZrO2 phase, the total density and average size of dislocation loops, obviously, decrease, attributed to the reason that many more glissile 1/2 loops migrate to annihilate preferentially at precipitate interfaces with a higher sink strength of 7.8 × 1014 m−2. The swaged W-1.5ZrO2 alloys have a high enough density of precipitate interfaces and grain boundaries to absorb large numbers of irradiated dislocations. This leads to the smallest irradiation hardening change in hardness of 4.52 Gpa, which is far superior to pure W materials. This work has a collection of experiments and conclusions that are of crucial importance to the materials and nuclear communities.

The application of multilayered monolithic scaffolds to repair osteochondral defects has become a hot research topic due to the advantage of simulating native osteochondral physiological structure. However, it was difficult to promote proliferation and migration of different kinds of cells in the corresponding layers under the same culture condition. Besides, the methods utilized in previous researches to construct tissue-engineered osteochondral construct were time-consuming, laborious, complicated, costly and difficult to ensure the quality and integration of multilayered construction. Inspired by the application of titanium mesh cage (TMC) for bone graft in spinal fusion surgery, we attempt to 3D print an integrated tri-layered scaffold with Titanium-Mesh-Cage base which could be filled with autogenous cancellous bone for bone graft to the osteochondral defect. Finally, the results of repairing cartilage defects of knee with this scaffold in goat model were evaluated. The results of in-vivo experiments suggested that utilizing the integrated tri-layered scaffold with Titanium-Mesh-Cage base to repair osteochondral defect was a convenient, cost-effective and time-saving procedures, which could achieve a satisfactory repair result as good as that of Mosaicplasty.

To enhance the wear resistance of high chromium cast iron (HCCI, Cr26), a new wear resistant alloy with high vanadium and chromium contents (HCCI-V, 15Cr5V4MoSiMn) was designed and prepared by sand mold casting. The microstructure and the phase composition were analyzed by SEM, EDS and XRD, and the abrasive wear property was tested compared with HCCI. Results show that the new wear resistant alloy is characterized by multi-scale and multi-type carbides distributed in a metal matrix composed of martensite and retained austensite. The carbides include VC, M _7 C _3 , M _2 C and M _23 C _6 (M stands for (Cr, Fe)), with dimensions ranging from tens of nanometers to tens of micrometers. The hardness and impact toughness of HCCI-V are 65 ± 0.2 HRC and 10 ± 0.12 J cm ^−2 , respectively, far higher than that of HCCI (57 ± 0.2 HRC, 8 ± 0.12 J cm ^−2 ). When the abrasive particle size and load are 6.5 μ m and 1.41 MPa respectively, the wear weight loss of HCCI and HCCI-V are 5.6 ± 0.1 mg and 0.8 ± 0.1 mg respectively, and the relative wear resistance of HCCI-V is 7. The excellent wear resistance of HCCI-V is attributed to the multi-scale carbides. The micro-scale carbides resist scratch, and the nano-scale carbides strengthens matrix. The multi-scale carbides can work collaboratively to resist abrasive wear efficiently.

In the published paper [1], there is an error in Figure 8. The labels in Figure 8 was incorrect, it should be corrected as follows [...]

In order to realize a micro-mechanic performance test of biaxial tensile-bending-combined loading and solve the problem of incompatibility of test apparatus and observation apparatus, novel biaxial-combined tensile-bending micro-mechanical performance test apparatus was designed. The working principle and major functions of key constituent parts of test apparatus, including the servo drive unit, clamping unit and test system, were introduced. Based on the finite element method, biaxial tensile and tension-bending-combined mechanical performances of the test-piece were studied as guidance to learn the distribution of elastic deformation and plastic deformation of all sites of the test-piece and to better plan test regions. Finally, this test apparatus was used to conduct a biaxial tensile test under different pre-bending loading and a tensile test at different rates; the image of the fracture of the test-piece was acquired by a scanning electron microscope and analyzed. It was indicated that as the pre-bending force rises, the elastic deformation phase would gradually shorten and the slope of the elastic deformation phase curve would slightly rise so that a yield limit would appear ahead of time. Bending speed could exert a positive and beneficial influence on tensile strength but weaken fracture elongation. If bending speed is appropriately raised, more ideal anti-tensile strength could be obtained, but fracture elongation would decline.

In this work, a series of quaternary AlxInyGa1−x−yN thin films have been successfully achieved using metal organic chemical vapor deposition (MOCVD) method with adjustable trimethylaluminum (TMA) flows. Surface morphology and optical properties of AlxInyGa1−x−yN films have been evaluated. The indium segregation effect on the enhancement of UV luminescence emission in AlxInyGa1-x-yN films with increasing TMA flows was investigated. Our results shed some lights on future optical materials design and LED/LD applications.