Search

Metal-support interactions have been widely utilized for optimizing the catalytic reactivity of oxide-supported Au nanoparticles. Optimized reactivity was mainly detected with small (1-5 nm) oxide-supported Au nanoparticles and correlated to highly reactive sites at the oxide-metal interface. However, catalytically active sites are not necessarily restricted to the interface but reside as well on the Au surface. Uncovering the interconnection between reactive sites located at the interface and those situated at the metal surface is of crucial importance for understanding the reaction mechanism on Au nanoparticles. Herein, high-spatial-resolution IR nanospectroscopy measurements were conducted to map the localized reactivity in hydrogenation reactions on oxide-supported Au particles while using nitro-functionalized ligands as probes molecules. Comparative analysis of the reactivity pattern on single particles supported on various oxides revealed that oxide-dependent reactivity enhancement was not limited to the oxide-metal interface but was detected throughout the Au particle, leading to site-independent reactivity. These results indicate that reactive Au sites on both the oxide-metal interface and metal surface can activate the nitro groups toward hydrogenation reactions. The observed influence of oxide support (TiO2 > SiO2 > Al2O3) on the overall reactivity pattern specified that hydrogen dissociation occurred at the oxide-metal interface, followed by highly efficient intraparticle hydrogen atom diffusion to the interior parts of the Au particle. In contrast to Au particles, the oxide-metal interface had only a minor impact on the reactivity of supported Pt particles in which hydrogen dissociation and nitro group reduction were effectively activated on Pt sites. Single-particle measurements provided insights into the relative reactivity pattern of oxide-supported Au particles, revealing that the less-reactive Au metal sites can activate hydrogenation reactions in the presence of hydrogen atoms that diffuse from the Au/oxide boundary.

N-heterocyclic carbenes (NHCs) have been widely utilized for the formation of self-assembled monolayers (SAMs) on various surfaces. The main methodologies for preparation of NHCs-based SAMs either requires inert atmosphere and strong base for deprotonation of imidazolium precursors or the use of specifically-synthesized precursors such as NHC(H)[HCO3] salts or NHC-CO2 adducts. Herein, we demonstrate an electrochemical approach for surface-anchoring of NHCs which overcomes the need for dry environment, addition of exogenous strong base or restricting synthetic steps. In the electrochemical deposition, water reduction reaction is used to generate high concentration of hydroxide ions in proximity to a metal electrode. Imidazolium cations were deprotonated by hydroxide ions, leading to carbenes formation that self-assembled on the electrode's surface. SAMs of NO2-functionalized NHCs and dimethyl-benzimidazole were electrochemically deposited on Au films. SAMs of NHCs were also electrochemically deposited on Pt, Pd and Ag films, demonstrating the wide metal scope of this deposition technique.

Catalytic nanoparticles are heterogeneous in their nature and even within the simplest particle various surface sites exist and influence the catalytic reactivity. Thus, detailed chemical information at the nanoscale is essential for understanding how surface properties and reaction conditions direct the reactivity of different surface sites of catalytic nanoparticles. In this work, hydroxyl-functionalized N-heterocyclic carbene molecules (NHCs) were anchored to the surface of Pt particles and utilized as chemical markers to detect reactivity variations between different surface sites under liquid and gas phase oxidizing conditions. Differences in the chemical reactivity of surface-anchored NHCs were identified using synchrotron-radiation-based infrared nanospectroscopy with a spatial resolution of 20 nanometers. By conducting IR nanospectroscopy measurements, along with complementary spatially averaged IR and X-ray spectroscopy measurements, we identified that enhanced reactivity occurred on the particles periphery under both gas and liquid phase oxidizing conditions. Under gas phase reaction conditions the NHCs hydroxyl functional groups underwent preferential oxidization to the acid along the perimeter of the particle. Exposure of the sample to harsher, liquid phase oxidizing conditions induced modification of the NHCs, which was mostly identified at the particles periphery. Analysis of X-ray absorption spectroscopy measurements revealed that exposure of the sample to oxidizing conditions induced aromatization of the NHCs, presumably due to oxidative dehydrogenation reaction, along with reorientation of the NHCs from perpendicular to parallel to the Pt surface. These results, based on single particle measurements, demonstrate the high reactivity of surface sites that are located at the nanoparticles periphery and the influence of reaction conditions on site-dependent reactivity.

The performance of catalysts depends on their nanoscale properties, and local variations in structure and composition can have a dramatic impact on the catalytic reactivity. Therefore, probing the localized reactivity of catalytic surfaces using high spatial resolution vibrational spectroscopy, such as infrared (IR) nanospectroscopy and tip-enhanced Raman spectroscopy, is essential for mapping their reactivity pattern. Two fundamentally different scanning probe IR nanospectroscopy techniques, namely, scattering-type scanning near-field optical microscopy (s-SNOM) and atomic force microscopy-infrared spectroscopy (AFM-IR), provide the capabilities for mapping the reactivity pattern of catalytic surfaces with a spatial resolution of ∼20 nm. Herein, we compare these two techniques with regard to their applicability for probing the vibrational signature of reactive molecules on catalytic nanoparticles. For this purpose, we use chemically addressable self-assembled molecules on Au nanoparticles as model systems. We identified significant spectral differences depending on the measurement technique, which originate from the fundamentally different working principles of the applied methods. While AFM-IR spectra provided information from all the molecules that were positioned underneath the tip, the s-SNOM spectra were more orientation-sensitive. Due to its field-enhancement factor, the s-SNOM spectra showed higher vibrational signals for dipoles that were perpendicularly oriented to the surface. The s-SNOM sensitivity to the molecular orientation influenced the amplitude, position, and signal-to-noise ratio of the collected spectra. Ensemble-based IR measurements verified that differences in the localized IR spectra stem from the enhanced sensitivity of s-SNOM measurements to the adsorption geometry of the probed molecules. [ABSTRACT FROM AUTHOR]

The recent development of high spatial resolution microscopy and spectroscopy tools enabled reactivity analysis of homogeneous and heterogeneous (electro)-catalysts at previously unattainable resolution and sensitivity. These techniques revealed that catalytic entities are more heterogeneous than expected and local variations in reaction mechanism due to divergences in the nature of active sites, such as their atomic properties, distribution, and accessibility, occur both in homogeneous and heterogeneous (electro)-catalysts. In this review, we highlight recent insights in catalysis research that were attained by conducting high spatial resolution studies. The discussed case studies range from reactivity detection of single particles or single molecular catalysts, inter- and intraparticle communication analysis, and probing the influence of catalysts distribution and accessibility on the resulting reactivity. It is demonstrated that multiparticle and multisite reactivity analyses provide unique knowledge about reaction mechanism that could not have been attained by conducting ensemble-based, averaging, spectroscopy measurements. It is highlighted that the integration of spectroscopy and microscopy measurements under realistic reaction conditions will be essential to bridge the gap between model-system studies and real-world high spatial resolution reactivity analysis. [ABSTRACT FROM AUTHOR]

Chemoselective reduction of nitro groups in multifunctional nitroaromatics is a challenging catalytic process with high interest due to the importance of the resulting anilines for the chemical industry. Molecular-level understanding of the ways by which adsorption geometry of nitroaromatics influence their affinity toward nitro reduction will enable the development of highly selective reactions. Herein, taking advantage of the well-ordered self-assembly of para- and ortho-nitrothiophenol (p-NTP and o-NTP, respectively) monolayers on Au(111), we examined the correlation between adsorption geometry and nitro reduction affinity. The anchoring geometry of NTPs and their nitro reduction affinity were determined by conducting polarized X-ray absorption spectroscopy while the influence of NTPs′ adsorption geometry on the interaction with the Au surface was analyzed by density functional theory (DFT) calculations. Exposure of surface anchored p-NTPs to reducing conditions led to their reorientation from a tilt angle of 52° to 25°, which enabled strong interactions between the π system of the molecules and the Au surface. Direct correlation was identified between the surface proximity of the nitro group, its parallel position to the surface and the resulting reduction yield. The asymmetric structure of o-NTP led to a tilted adsorption geometry in which the nitro group was rotated away from the plane of the aromatic ring and therefore was positioned parallel and in high proximity to the Au surface. This positioning led to surface-bonding that involved the oxygen atoms of o-NTP. The higher surface proximity and stronger surface interactions of the nitro group in o-NTP enabled nitro reduction already at 180 °C, while in p-NTP nitro reduction was achieved only at 230 °C, due to the longer distance between the NO2 group and the Au surface that led to weaker adsorbate-surface interactions. Thus, parallel positioning of the nitro group and high surface proximity were found as essential descriptors for nitro reduction affinity in both p-NTP and o-NTP on the Au surface. These findings provide explicit guidelines for tuning the reactant and surface properties in order to control the reactant's adsorption geometry for selective nitro reduction in multifunctional nitroaromatics. [ABSTRACT FROM AUTHOR]

Atomic and molecular layer deposition (ALD and MLD) are techniques based on surface‐directed self‐limiting reactions that afford deposition of films controlled at the monolayer level and with extreme conformality, even on ultra‐high‐aspect‐ratio and porous substrates. These methodologies are typically used to deposit thin films with desirable physical properties and functionality. Here, the MLD process is harnessed to demonstrate the growth of molecularly thin chiral films that inherit a desirable chemical property directly from the source precursor: using this innovative technique, enantioselective nanosurfaces are managed to be grown. Specifically, the formation of a Zn/Cysteine nanostructure by MLD is demonstrated for both the l‐ and d‐ enantiomers. The reaction and growth mechanism of these chiral hybrid inorganic‐organic nanosurfaces are studied via various experimental procedures; their enantioselectivity is also demonstrated. The findings contribute to the understanding of the structure and chiral nature of hybrid inorganic‐organic nanosurfaces and open the path to the bottom‐up synthesis of diverse chiral nanosurfaces. These chiral nanostructures may play a key role in many aspects of chiral chemistry and are valuable for both fundamental science and practical applications. [ABSTRACT FROM AUTHOR]

Nanoparticle-imprinted matrices (NAIMs) are an innovative approach for the efficient and selective recognition of nanoparticles (NPs). The NAIM system comprises the preparation of thin films in which NPs are embedded as a template. The removal of the template forms nanometric voids, which are subsequently used for the selective reuptake of NPs identical to those imprinted. The recognition ability depends on several parameters such as the geometrical compatibility between the voids and imprinted NPs, the thickness of the matrix, and the supramolecular interactions between the matrix and the NP capping agents. Herein, we studied carefully the NP–matrix interactions in three NAIM systems, which were prepared by imprinting identical-sized AuNPs, bearing different carboxylic acid-functionalized thiols as capping agents, in a carboxylic acid-functionalized matrix. This experimental setup has enabled us to meticulously examine the selectivity of the NAIM systems driven by matrix–shell interactions. The three studied NAIM systems have shown high and selective reuptake ability once exposed to solutions of NPs stabilized with the same capping agent used for the imprinting process. In particular, the reuptake percentage of the originally imprinted AuNPs ranges from 50 to 80%, whereas the reuptake of AuNPs bearing different carboxylic capping agents than those imprinted was substantially lower (1–11%). Surface-sensitive polarization-modulation infrared reflection-absorption spectroscopy was utilized to correlate the selectivity of the NAIM systems and hydrogen bonding detected between the capping agents and the matrix. This study paves the way for the rational design of NAIM systems, which can be tuned according to the desired shell–matrix interactions and eventually applied in sensing and separation technologies. [ABSTRACT FROM AUTHOR]

Self-assembly of photo-responsive molecules is a robust technology for reversibly tuning the properties of functional materials. Herein, we probed the crucial role of surface–adsorbate interactions on the adsorption geometry of stilbene-functionalized N-heterocyclic carbenes (stilbene-NHCs) monolayers and its impact on surface potential. Stilbene-NHCs on Au film accumulated in a vertical orientation that enabled high photoisomerization efficiency and reversible changes in surface potential. Strong metal–adsorbate interactions led to flat-lying adsorption geometry of stilbene-NHCs on Pt film, which quenched the photo-isomerization influence on surface potential. It is identified that photo-induced response can be optimized by positioning the photo-active group in proximity to weakly-interacting surfaces. [ABSTRACT FROM AUTHOR]

Site-dependent selectivity in oxidation reactions on Pt nanoparticles was identified by conducting IR nanospectroscopy measurements while using allyl-functionalized N-heterocyclic carbenes (allyl-NHCs) as probe molecules. Following exposure to oxidizing conditions the allyl groups in NHCs that were located on the center of Pt nanoparticles were oxidized to hydroxyl while those located on the nanoparticle's periphery were oxidized into carboxylic acid. The superior reactivity on the periphery of the nanoparticles was correlated to higher density of low coordinated atoms on these surface sites. [ABSTRACT FROM AUTHOR]

The formation of flexible self‐assembled monolayers (SAMs) in which an external trigger modifies the geometry of surface‐anchored molecules is essential for the development of functional materials with tunable properties. In this work, it is demonstrated that NO2‐functionalized N‐heterocyclic carbene molecules (NHCs), which were anchored on Au (111) surface, change their orientation from tilted into flat‐lying position following trigger‐induced reduction of their nitro groups. DFT calculations identified that the energetic driving force for reorientation was the lower steric hindrance and stronger interactions between the chemically reduced NHCs and the Au surface. The trigger‐induced changes in the NHCs′ anchoring geometry and chemical functionality modified the work function and the hydrophobicity of the NHC‐decorated Au surface, demonstrating the impact of a chemically tunable NHC‐based SAM on the properties of the metal surface. [ABSTRACT FROM AUTHOR]

Although native chemical ligation has enabled the synthesis of hundreds of proteins, not all proteins are accessible through typical ligation conditions. The challenging protein, 125-residue human phosphohistidine phosphatase 1 (PHPT1), has three cysteines near the C-terminus, which are not strategically placed for ligation. Herein, we report the first sequential native chemical ligation/deselenization reaction. PHPT1 was prepared from three unprotected peptide segments using two ligation reactions at cysteine and alanine junctions. Selenazolidine was utilized as a masked precursor for Nterminal selenocysteine in the middle segment, and, following ligation, deselenization provided the native alanine residue. This approach was used to synthesize both the wild-type PHPT1 and an analogue in which the active-site histidine was substituted with the unnatural and isosteric amino acid βthienyl- l-alanine. The activity of both proteins was studied and compared, providing insights into the enzyme active site. [ABSTRACT FROM AUTHOR]

Invited for the cover of this issue are Elad Gross, F. Dean Toste, and co‐workers at The Hebrew University and UC Berkeley. The image depicts the flexible anchoring geometry of addressable carbene molecules on Au surface, which upon exposure to reducing conditions changed their orientation from a standing into a flat‐lying position. Read the full text of the article at 10.1002/chem.201903434. [ABSTRACT FROM AUTHOR]

N-heterocyclic carbenes (NHCs) have been extensively studied to modulate the reactivity of molecular catalysts, colloids, and their supported analogues, being isolated sites, clusters, or nanoparticles. While the interaction of NHCs on metal surfaces has been discussed in great detail, showing specific coordination chemistry depending on the type of NHC ligands, much less is known when the metal is dispersed on oxide supports, as in heterogeneous catalysts. Herein, we study the interaction of NHC ligands with Au surface sites dispersed on silica, a nonreducible oxide support. We identify the easy formation of bis-NHC ligated Au(I) surface sites parallel to what is found on metallic Au surfaces. These species display a specific 13 C NMR spectroscopic signature that clearly distinguishes them from the mono-NHC Au(I) surface sites or supported imidazoliums. We find that bis-ligated surface species are not unique to supported Au(I) species and are found for the corresponding Ag(I) and Cu(I) species, as well as for the isolobal surface silanols. Furthermore, the interaction of NHC ligand with silica-supported Au nanoparticles also yields bis-NHC ligated Au(I) surface sites, indicating that metal atoms can also be easily extracted from nanoparticles, further illustrating the dynamics of these systems and the overall favorable formation of such bis-ligated species across a range of systems, besides what has been found on crystalline metal facets.

Fundamental understanding of the correlation between the structure and reactivity of chemically addressable N-heterocyclic carbene (NHC) molecules on various surfaces is essential for the design of functional NHC-based self-assembled monolayers. In this work, we identified the ways by which the deposition of chemically addressable OH-NHCs on Au(111) or Pt(111) surfaces modified the anchoring geometry and chemical reactivity of surface-anchored NHCs. The properties of surface-anchored NHCs were probed by conducting X-ray photoelectron spectroscopy and polarized near-edge X-ray absorption fine structure measurements. While no preferred orientation was identified for OH-NHCs on Pt(111), the anchored molecules adopted a preferred flat-lying position on Au(111). Dehydrogenation and aromatization of the imidazoline ring along with partial hydroxyl oxidation were detected in OH-NHCs that were anchored on Au(111). The dehydrogenation and aromatization reactions were facilitated, along with partial decomposition, for OH-NHCs that were anchored on Pt(111). The spectroscopic results reveal that stronger metal-adsorbate interactions increase the reactivity of surface-anchored OH-NHCs while decreasing their molecular orientational order.

The development of chemically addressable N-heterocyclic carbene (NHC) based self-assembled monolayers (SAMs) requires in-depth understanding of the influence of NHC's anchoring geometry on its chemical functionality. Herein, it is demonstrated that the chemical reactivity of surface-anchored NO 2 -functionalized NHCs (NO 2 -NHCs) can be tuned by modifying the distance between the functional group and the reactive surface, which is governed by the deposition technique. Liquid deposition of NO 2 -NHCs on Pt(111) induced a SAM in which the NO 2 -aryl groups were flat-lying on the surface. The high proximity between the NO 2 groups and the Pt surface led to high reactivity, and 85% of the NO 2 groups were reduced at room temperature. Lower reactivity was obtained with vapor-deposited NO 2 -NHCs that assumed a preferred upright geometry. The separation between the NO 2 groups in the vapor-deposited NO 2 -NHCs and the reactive surface circumvented their surface-induced reduction, which was facilitated only after exposure to harsher reducing conditions.