Search

Although rare, trans-kingdom infection features an interesting infection biology concept, in which highly versatile pathogenic attributes allow successful infections in evolutionarily highly divergent species. Corynespora cassiicola is a phytopathogenic fungus and occasionally causes human infections. Herein, we report a phaeohyphomycosis case caused by C. cassiicola. Given that sporadic reports may contribute to a lack of awareness of the transmission route, clinical manifestations, and diagnostic and clinical management, we systematically reviewed the cases reported thus far. Nine patients were identified and included in the pooled analysis, 88.9% (8/9) of whom were reported after 2010. All patients were from Asian, African, and Latin American countries, among whom 77.8% (7/9) were farmers or lived in areas with active agriculture. Exposed body parts were the major affected infection area, and clinical manifestations were mainly non-specific inflammatory reactions. Although biochemical and morphological examinations confirmed the presence of fungal infection, molecular analysis was used for the final diagnosis, with 77.8% (7/9) being identified by internal transcribed spacer sequencing. Whereas voriconazole, terbinafine, and AmB, either alone or in combination, resulted in successful infection resolution in most cases (5/9; 55.5%), those suffering from invasive facial infections and CARD9 deficiency showed poor outcomes. Our patient is the third case of invasive facial infection caused by C. cassiicola and was successfully treated with intravenous LAmB followed by oral voriconazole combined with topical antifungal irrigation. Molecular identification of fungus and prompt antifungal treatment is pivotal in the clinical success of patients suspected to have phaeohyphomycosis. Moreover, as evidenced by our data, itraconazole treatment is not recommended.

The technical bottleneck of carbon materials as counter electrodes (CEs) lies in their limited electrical conductivity, extended ion diffusion paths, poor dispersion, and high contact resistance. Problem-oriented in-situ self-grown N-doped CNTs-coated Ni nanoparticles based on N-doped carbonaceous structures derived from pitaya peel (PC) are adopted to construct Ni-N-C hybrid 3D ionized network sites (Ni@NCNTs/PC-4) as CEs. Structural characterization, micromorphological and chemical composition analyses revealed the 3D network structure of Ni@NCNTs/PC-4 with abundant active sites. They effectively shorten the diffusion distance of I3− ions with a smaller charge transfer resistance (5.21 Ω) than that of PC (12.53 Ω). DSSCs based on Ni@NCNTs/PC-4 display good optoelectronic properties, in which the short-circuit current density (Jsc) is 13.27 mA/cm2, higher than those of Pt (11.66 mA/cm2) and PC (6.99 mA/cm2). The PCE value (5.13%) of DSSCs based on Ni@NCNTs/PC-4 is also higher than that of DSSCs based on PC (2.47%). Overall, this work provides a preliminary research and new ideas for further in-depth study of biomass-derived 3D structured-carbons that contribute to key electrodes in DSSCs.

Trichophyton is the most pathogenic type of fungal skin infection. It often invades and grows in a keratin-rich matrix, and lesions include human skin, hair, and fingernails (toenails). We designed LAMP primers for Trichophyton and developed a LAMP-Microfluidic chip detection system for Trichophyton. This system detects six common species of Trichophyton in the genus Trichophyton, including Trichophyton rubrum, Trichophyton mentagrophyte, Trichophyton violaceum, Trichophyton tonsurans, Trichophyton verrucosum, and Trichophyton schoenleinii. The specificity reached 100%, and the sensitivity could reach about 1 × 102 copies/μl. The entire detection process can be completed within 60 min and does not cross-react with other dermatophytes. The established LAMP-Microfluidic chip detection system has the advantages of simple operation, high specificity, and high sensitivity, and has the potential for clinical application.

Abstract Background The clinical profiles and outcomes of cryptococcal meningitis have been shown to vary depending on the underlying condition. The aim of this study was to investigate clinical characteristics and outcomes in patients with and without type II diabetes mellitus. Methods A retrospective study was performed. Clinical data of HIV-negative cryptococcal meningitis patients with type II diabetes mellitus (n = 26) and without type II diabetes mellitus (n = 52) referring to the Jiangxi Chest Hospital between January 2012 to December 2018 were analyzed. The data were analyzed using chi square, none-parametric tests, and logistic regression. P-values

There is increasing interest in furfurylated wood, but the polymerization mechanism between its internal polyfurfuryl alcohol (PFA) and lignin is still uncertain. This paper investigated the distribution of PFA and the feasibility of the polymerization of PFA with lignin in furfurylated balsa wood. The wood first immersed in the furfuryl alcohol (FA) solution followed by in situ polymerization and the distribution of PFA was characterized by Raman, fluorescence microscopy, SEM, and CLSM. Then, the mill wood lignin (MWL) of balsa wood and lignin model molecules were catalytically polymerized with PFA, respectively, studying the mechanism of interaction between PFA and lignin. It was concluded that PFA was mainly deposited in cell corner with high lignin concentration, and additionally partly deposited in wood cell cavity due to high concentration of FA and partial delignification. TGA, FTIR, and NMR analysis showed that the cross-linked network structure generated by the substitution of MWL aromatic ring free position by PFA hydroxymethyl enhanced the thermal stability. New chemical shifts were established between PFA and C5/C6 of lignin model A and C2/C6 of model B, respectively. The above results illustrated that lignin-CH2-PFA linkage was created between PFA and lignin in the wood cell wall.

CircRNAs are a recently well-known regulator that mediates a variety of biological processes. Cryptococcus neoformans is an environmental fungal pathogen that can cause fatal cryptococcal meningitis in immunocompromised individuals. However, the involvement of circRNA in cryptococcal infection remains unclear. In this study, high-throughput microarray was performed to identify the circRNA expression profile in cryptococcal meningitis patients. Circ_0001806 was significantly decreased in cryptococcal meningitis individuals. Then the effects of circ_0001806 and its interaction with miRNAs were explored in vivo and in vitro. The knock-down of circ_0001806 led to higher fungal infection and shorter survival in an experimental murine cryptococcosis model. Transcriptome analysis showed that decreased circ_0001806 regulated pathways related to the host antimicrobe response in T cells. Furthermore, in vitro experiments showed that circ_0001806 positively modulates ADM level, decreasing cell apoptosis and G1S arrest in T cells. Finally, we found circ_0001806 exerted its effects by sponging miRNA-126 in T cells. Taken together, our results reveal the role of circRNA-1806/miRNA-126 in the regulation of cell cycle and apoptosis in cryptococcal infection and can provide a new insights of the pathogenesis of cryptococcal infection.

Microcrystalline cellulose (MCC) was functionalized with quaternary amine groups for use as an adsorbent to remove Congo Red dye (CR) from aqueous solution. The ultrasonic pretreatment of MCC was investigated during its functionalization. Characterization was conducted using infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The batch adsorption of the functionalized MCC was studied to evaluate the effects of dye concentration, pH of solution, temperature, and NaCl concentration on the adsorption CR. The adsorbent (FM-1) obtained using ultrasonic pretreatment of MCC under 10.8 kJ•g–1 exhibited an adsorption capacity of 304 mg•g–1 at initial pH under a dose of 0.1 g•L–1 and initial concentration of 80 mg•L–1. After functionalization, the FT-IR and XPS results indicated that the quaternary amine group was successfully grafted onto the cellulose, the surface was transformed to be coarse and porous, and the crystalline structure of the original cellulose was disrupted. FM-1 has been shown to be a promising and efficient adsorbent for the removal of CR from an aqueous solution.

High-purity and high-yield boron nitride nanotubes with large aspect ratio were prepared by a facile two-step process, including the synthesis of boron/nickel containing precursors by precipitation reactions and subsequent thermally catalytic chemical vapor deposition reactions. The influence of catalyst content and annealing temperature on the phase composition and microstructure of the products were investigated. The results show that it is difficult to exert the catalytic effect of nickel-based catalyst at low temperatures (

Cationized Eucalyptus wood chips cellulose (DEC, HEC and OEC) were prepared via grafting with a quaternary ammonium group using N,N-dimethyl-1-dodecylamine, N,N-dimethyl-1-hexadecylamine or N,N-dimethyl-1-octadecylamine as modification agents onto Eucalyptus wood chips cellulose (EC) microstructure. The characterization results showed that the molecular structure and morphology of EC changed with the quaternary ammonium group being successfully grafted onto the EC molecular structure. DEC, HEC and OEC with the same degree of substitution were selected as adsorbents for the adsorption of Acid Blue 93 dye to evaluate the dye adsorption performance and mechanism of cationized cellulose with different molecular structures. The adsorption process was well-described by pseudo-second-order and Langmuir models. We found that the adsorption capacity increased with the increasing length of the alkyl chain of the DEC, HEC and OEC. The adsorbents exhibited high reusability and high adsorption performance for dye removal. Thermodynamic parameters indicated that the adsorption process is a spontaneous and feasible process, and that increasing the temperature is conducive to the adsorption process. [ABSTRACT FROM AUTHOR]