Search

Part I of this publication deals with the analysis of fission product releases consecutive to the Fukushima Dai-ichi accident. Reactor core damages are assessed relying on radionuclide detections performed by the CTBTO radionuclide network, especially at the particulate station located at Takasaki, 210 km away from the nuclear power plant. On the basis of a comparison between the reactor core inventory at the time of reactor shutdowns and the fission product activities measured in air at Takasaki, especially Nb and Ru, it was possible to show that the reactor cores were exposed to high temperature for a prolonged time. This diagnosis was confirmed by the presence of Sn in air at Takasaki. The Xe assessed release at the time of reactor shutdown (8 × 10 Bq) turned out to be in the order of 80 % of the amount deduced from the reactor core inventories. This strongly suggests a broad meltdown of reactor cores. [ABSTRACT FROM AUTHOR]

The verification regime of the comprehensive test ban treaty (CTBT) is based on a network of three different waveform technologies together with global monitoring of aerosols and noble gas in order to detect, locate and identify a nuclear weapon explosion down to 1 kt TNT equivalent. In case of a low intensity underground or underwater nuclear explosion, it appears that only radioactive gases, especially the noble gas which are difficult to contain, will allow identification of weak yield nuclear tests. Four radioactive xenon isotopes, Xe, Xe, Xe and Xe, are sufficiently produced in fission reactions and exhibit suitable half-lives and radiation emissions to be detected in atmosphere at low level far away from the release site. Four different monitoring CTBT systems, ARIX, ARSA, SAUNA, and SPALAX™ have been developed in order to sample and to measure them with high sensitivity. The latest developed by the French Atomic Energy Commission (CEA) is likely to be drastically improved in detection sensitivity (especially for the metastable isotopes) through a higher sampling rate, when equipped with a new conversion electron (CE)/X-ray coincidence spectrometer. This new spectrometer is based on two combined detectors, both exhibiting very low radioactive background: a well-type NaI(Tl) detector for photon detection surrounding a gas cell equipped with two large passivated implanted planar silicon chips for electron detection. It is characterized by a low electron energy threshold and a much better energy resolution for the CE than those usually measured with the existing CTBT equipments. Furthermore, the compact geometry of the spectrometer provides high efficiency for X-ray and for CE associated to the decay modes of the four relevant radioxenons. The paper focus on the design of this new spectrometer and presents spectroscopic performances of a prototype based on recent results achieved from both radioactive xenon standards and air sample measurements. Major improvements in detection sensitivity have been reached and quantified, especially for metastable radioactive isotopes Xe and Xe with a gain in minimum detectable activity (about 2 × 10 Bq) relative to current CTBT SPALAX™ system (air sampling frequency normalized to 8 h) of about 70 and 30 respectively. [ABSTRACT FROM AUTHOR]

The atomic and nuclear masses of 4He and 3He have been measured using doubly charged ions in a Penning trap connected to an electron beam ion source. Recent technical improvements allow mass determinations with uncertainties of a few parts in 1010. The obtained atomic masses are 4.002 603 256 8(13) u and 3.016 029 323 5(28) u respectively. These values deviate by as much as 5 standard deviations from the accepted values. [ABSTRACT FROM AUTHOR]

A global-scale simulation of the 133 Xe atmospheric background is automated at the French National Data Center (NDC) for the purpose of categorizing the radionuclide measurements of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) International Monitoring System (IMS). These simulations take into account 133 Xe releases from all known major industrial emitters in the world, compiled from the literature and described as constant values. Emission data measured directly at the stack of the Institute for Radio Elements (IRE), a medical isotope production facility located in Fleurus (Belgium), were implemented in the simulations with a time resolution of 15 minutes. This work discusses the contribution of real (measured) emissions to the prediction of the 133 Xe atmospheric background at IMS noble gas stations and at a location near Paris, for which IMS-like 133 Xe measurements were available. For the purpose of this study, simulations initiated with the IRE measured emissions were run in parallel to those with the a priori emissions used to date. The benefits of including actual emissions in the simulations were found as a function of the distance between the station and the source of the release. At the closest stations, i.e., near Paris (France) and at Schauinsland, Freiburg (Germany), respectively 250 and 400 km from Fleurus, the simulated activity concentrations differed by a factor greater than 2 more than one third of the time, and by a factor of more than 5 about 10% of the time. No significant or detectable differences were found beyond 1500-2000 km. Furthermore, at the Paris station, the timing of the measured peaks was better reproduced with the actual emission data. However, not all peak amplitudes were correctly reproduced even though the real emissions were used, highlighting the remaining uncertainties, primarily in the meteorological data and transport modeling., (Copyright © 2022. Published by Elsevier Ltd.)

Atmospheric transport modeling has been used to interpret the unprecedented number of multi-isotope detections of radioxenons observed during the six months of the qualification process by the Comprehensive Nuclear-Test-Ban Treaty Organization of the new SPALAX-NG system (Système de Prélèvement Automatique en Ligne avec l'Analyse du Xénon - Nouvelle Génération). Highest 133 Xe activity concentrations were found to be systematically associated with the concomitant measurement of several other radioxenons at the prevailing wind direction of north/northeast pointing to the Institute for Radio Elements (IRE), a medical isotope production facility located in Fleurus (Belgium). The lowest 133 Xe activity concentrations were not associated with a prevailing wind direction or other radioxenons, indicating the contribution of distant sources (global background). The IRE's average source terms for 133m Xe and to a lesser extent for 133 Xe (slightly overestimated by a factor of 1.7) showed good agreement with the literature values, while corrections by a factor of ~23 and ~53 were proposed for 131m Xe and 135 Xe since the initial values were underestimated. However, detections of 131m Xe alone and some low-activity concentrations of 133 Xe associated with only one of the other radioxenons could not be linked to the IRE releases. Analysis of these cases suggests the contribution of local source releases that have been difficult to identify to date. In addition to the global background, releases from such local sources, if not identified, could affect the analysis of the isotopic ratios measured following a nuclear test. The characterization of these local contributions is now possible owing to the capacity of the SPALAX-NG and other new generation measurements systems., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The SPALAX-NG is a new-generation system that is designed to detect radioactive xenon at trace levels in the atmosphere following a nuclear explosion or civilian source release. This new system formed part of a validation program led by the Provisional Technical Secretary of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) Organization. In this study, the first SPALAX-NG unit was tested for six months between October 2018 and April 2019 at the CEA/DIF premises near Paris, France. This test period provided an outstanding opportunity to illustrate the high level of detectability and reliability of the system. The data availability obtained over this period was approximately 99%, which was well above the CTBT Data Availability criteria of 95%. The data reliability was demonstrated by a comparison with a collocated SPALAX-1 unit (former version of SPALAX) and by re-measuring several samples at the CTBT-certified French laboratory FRL08. The high sensitivity to the detection of the four relevant radioxenon isotopes was fully demonstrated and enabled the recording of a major dataset for western Europe. A large set of isotopic ratios was measured, which enabled the discrimination criteria between civilian sources and nuclear test signatures to be refined., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The SPALAX (Système de Prélèvement Automatique en Ligne avec l'Analyse du Xénon) is one of the systems used in the International Monitoring System of the Comprehensive Nuclear Test Ban Treaty (CTBT) to detect radioactive xenon releases following a nuclear explosion. Approximately 10 years after the industrialization of the first system, the CEA has developed the SPALAX New Generation, SPALAX-NG, with the aim of increasing the global sensitivity and reducing the overall size of the system. A major breakthrough has been obtained by improving the sampling stage and the purification/concentration stage. The sampling stage evolution consists of increasing the sampling capacity and improving the gas treatment efficiency across new permeation membranes, leading to an increase in the xenon production capacity by a factor of 2-3. The purification/concentration stage evolution consists of using a new adsorbent Ag@ZSM-5 (or Ag-PZ2-25) with a much larger xenon retention capacity than activated charcoal, enabling a significant reduction in the overall size of this stage. The energy consumption of the system is similar to that of the current SPALAX system. The SPALAX-NG process is able to produce samples of almost 7 cm(3) of xenon every 12 h, making it the most productive xenon process among the IMS systems., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The present work reports on the results of Monte Carlo simulations performed with MCNP on an assembly of two HPGe detectors facing each other regarding detector efficiencies. Report is also made when a third detector is added to the previous configuration from below. Moreover cross talk between detectors is investigated and found of limited impact. The choice for an actual detector goes to the three detector configuration for accommodating most geometries while cost and engineering constrains remain acceptable., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Some unexpected behaviours of PTW/Nucletron well-type ionization chambers have been discovered. A significant undesired detection volume is present in the region surrounding the electrical terminals. A finite-element code has been used to compute electrical fields in this region, and it showed that the magnitude of the undesired volume was dependent on the electrical connector type. An experimental confirmation of this assumption has been obtained. A source activity dependence of the calibration coefficients has also been revealed. A set of recommendations for the optimal use of this detector is proposed.

An indirect comparison has been made in the air kerma standards for high dose rate (HDR) 192Ir brachytherapy sources at the Laboratoire National Henri Becquerel (LNHB) and the National Physical Laboratory (NPL). The measurements were carried out at both laboratories between November and December 2004. The comparison was based on measurements using well-type transfer ionization chambers and two different source types, Nucletron microSelectron HDR Classic and version 2. The results show the reported calibration coefficients to agree within 0.47% to 0.63%, which is within the overall standard uncertainty of 0.65% reported by both laboratories at the time of this comparison. Following this comparison, some of the NPL primary standard correction factors were re-evaluated resulting in a change of +0.17% in the overall correction factor. The new factor was implemented in May 2006. Applying the revised chamber factor to the measurements reported in this comparison report will reduce the difference between the two standards by 0.17%.

The influence of ambient humidity on the current delivered by a vented ionization chamber has been re-investigated. A Nucletron 077.091 well-type chamber together with a (192)Ir HDR brachytherapy source was enclosed in a climatic test chamber and the current was recorded for various humidity values. Great care has been taken for the design of the experimental setup in order to obtain reliable measurements of currents and humidity values inside the chamber active volume. A +/-0.35% linear variation of the measured currents has been observed over a common range of humidities. This result is larger than the expected variation. No formal explanation of such a discrepancy has been found yet, however the present results could lead to a set of recommendations.

A bilateral comparison of national dosimetric standards for high dose rate brachytherapy has been conducted between the Laboratoire National Henri Becquerel and the University of Wisconsin Accredited Dosimetry Calibration Laboratory. A complete overview of the methods that are currently in use to establish the two national standards is given. The comparison has been carried out using well-type transfer ionization chambers. Three units have been calibrated in both laboratories, and calibration coefficients have been compared. The discrepancies between the two measurements are within 0.3%.

The Q value of the (76)Ge double beta decay has been determined by measuring the masses of (76)Ge and (76)Se in a Penning trap using neon- and fluorinelike ions. The obtained masses are 75.921 402 758(96) u and 75.919 213 795(81) u, respectively. The systematic errors of these two determinations are nearly equal, and therefore, the remaining systematic uncertainty of the Q value is drastically reduced. A Q value of 2 039.006(50) keV was obtained improving the accuracy of the accepted value by a factor of 6.