Search

Abstract For effective ocean energy harvesting, it is necessary to understand the coupled motion of the piezoelectric nanogenerator (PENG) and ocean currents. Herein, we experimentally investigate power performance of the PENG in the perspective of the fluid–structure interaction considering ocean conditions with the Reynolds number (Re) values ranging from 1 to 141,489. A piezoelectric polyvinylidene fluoride micromesh was constructed via electrohydrodynamic (EHD) jet printing technique to produce the β-phase dominantly that is desirable for powering performance. Water channel was set to generate water flow to vibrate the flexible PENG. By plotting the Re values as a function of nondimensional bending rigidity (K B ) and the structure-to-fluid mass ratio (M*), we could find neutral curves dividing the stable and flapping regimes. Analyzing the flow velocities between the vortex and surroundings via a particle image velocimetry, the larger displacement of the PENG in the chaotic flapping regime than that in the flapping regime was attributed to the sharp pressure gradient. By correlating M*, Re, K B , and the PENG performance, we conclude that there is critical K B that generate chaotic flapping motion for effective powering. We believe this study contributes to the establishment of a design methodology for the flexible PENG harvesting of ocean currents.

—Micropumps have attracted considerable interest in micro-electro-mechanical systems (MEMS), microfluidic devices, and biomedical engineering to transfer fluids through capillaries. However, improving the sluggish capillary-driven flow of highly viscous fluids is critical for commercializing MEMS devices, particularly in underfill applications. This study investigated the behavior of different viscous fluid flows under the influence of capillary and electric potential effects. We observed that upon increasing the electric potential to 500 V, the underfill flow length of viscous fluids increased by 45% compared to their capillary flow length. To explore the dynamics of underfill flow under the influence of an electric potential, the polarity of highly viscous fluids was altered by adding NaCl. The results indicated an increase of 20–41% in the underfill flow length of highly viscous conductive fluids (0.5–4% NaCl additives in glycerol) at 500 V compared to that at 0 V. The underfill viscous fluid flow length improved under the electric potential effect owing to the polarity across the substance and increased permittivity of the fluid. A time-dependent simulation, which included a quasi-electrostatic module, level set module, and laminar two-phase flow, was executed using the COMSOL Multiphysics software to analyze the effect of the external electric field on the capillary-driven flow. The numerical simulation results agreed well with the experimental data, with an average deviation of 4–7% at various time steps for different viscous fluids. Our findings demonstrate the potential of utilizing electric fields to control the capillary-driven flow of highly viscous fluids in underfill applications.

Abstract The hydrogel of biomolecule-assisted metal/organic complex has the superior ability to form a uniform, continuous, and densely integrated structure, which is necessary for fine thin film fabrication. As a representative of nature-originated polymers with abundant reactive side chains, we select the gelatin molecule as an element for weaving the metal cations. Here, we demonstrate the interaction between the metal cation and gelatin molecules, and associate it with coating quality. We investigate the rheological property of gelatin solutions interacting with metal cation from the view of cross-linking and denaturing of gelatin molecules. Also, we quantitatively compare the corresponding interactions by monitoring the absorbance spectrum of the cation. The coated porous structure is systematically investigated from the infiltration of gelatin-mediated Gd0.2Ce0.8O2−δ (GDC) precursor into Sm0.5Sr0.5CoO3−δ (SSC) porous scaffold. By applying the actively interacting gelatin–GDC system, we achieve a thin film of GDC on SSC with excellent uniformity. Compare to the discrete coating from the typical infiltration process, the optimized thin film coated structure shows enhanced performance and stability.

Precise and rapid detection of biomolecules is a fast-growing research theme in the field of biomedical engineering. Based on the surface-enhanced Raman scattering, micro/nano-scale structures composed of noble metals (e.g., gold and silver) play a critical role in plasmonics. However, it is still limited to structuring nanomaterials in a specific manner. Here, we investigated a novel surface-enhanced Raman spectroscopy (SERS) application using one-dimensional nanomaterials and micro-encapsulation methods. With the immiscible nature of fluids, the nanomaterials were properly captured inside a number of droplets for encapsulation, deforming to micro-ring nanostructures. To yield uniform sizes of the silver micro-ring structures, a microchannel system was designed to characterize particle sizes via microscopic approaches. We were able to obtain printable silver nanowire micro-ring ink, and investigated the SERS substrate effect of the silver micro-ring structure. This fabrication method can be used in many other SERS-based biomedical engineering applications in the near future.

In this paper we report on the results of the simulations of the electromagnetic properties of a metasurface composed of a 2D-array of plasmonic nanoantennas acting as polarisation insensitive dual band THz perfect absorber able to achieve absorption coefficients and quality factors up to 99.6% and 122, respectively. The 2D-array is designed on top of a polyimide flexible film separating it from an Ag ground layer. The plasmonic nanoantenna is composed of two Ag quadrangular rings and an Ag diamond-shape dot is placed at their geometrical centre. The absorption resonances show a linear frequency shift with respect to variations of the refractive index of transparent substances adsorbed on the metasurface. This allows the dual-band absorber to be employed as a sensor of the chemical/physical modifications taking place on the substance. In particular, in terms of the refractive index units, the sensor based on the dual-band absorber can achieve sensitivities up to 310 GHz/RIU.

In recent years, microbial fuel cells (MFCs) have gained much attention due to their potential to generate energy in a sustainable manner from living microorganisms. Research has shown that electrode design is a critical factor for MFCs power enhancement. In this study, we designed and fabricated MFCs energy-harvesting devices with living bacteria, and we investigated the effect of the surface roughness of the electrodes on power generation. In batch experiments of our MFCs, we found that the total power delivered could be enhanced using electrodes having rough surfaces with protruded micro-structures relative to that of electrodes with a flat surface. This was due to the delayed acidification resulting from the changes in bio-film formation between them. [ABSTRACT FROM AUTHOR]

Invisible Ag-grid transparent electrodes (TEs) were prepared by electrohydrodynamic (EHD) jet printing using Ag nano-particle inks. Ag-grid width less than 10 µm was achieved by the EHD jet printing, which was invisible to the naked eye. The Ag-grid line-to-line distance (pitch) was modulated in order to investigate the electrical and optical properties of the EHD jet-printed Ag-grid TEs. The decrease in the sheet resistance at the expense of the transmittance was observed as the Ag-grid pitch decreased. The figure of merit of Ag-grid TEs with various Ag-grid pitches was investigated in order to determine the optimum pitch condition for both electrical and optical properties. With the 150 µm Ag-grid pitch, the EHD jet-printed Ag-grid TE has the sheet resistance of 4.87 Ωsq-1 and the transmittance of 81.75% after annealing at 200 °C under near-infrared. Ag filling factor (FF) was defined to predict the electrical and optical properties of Ag-grid TEs. It was found that the measured electrical and optical properties were well simulated by the theoretical equations incorporating FF. The EHD jet-printed invisible Ag-grid TE with good electrical and optical properties implies its promising application to the printed optoelectronic devices. [ABSTRACT FROM AUTHOR]

We present an improvement in the electrical properties of silica nanotubes by coating metal nanoparticles on their surfaces. The silica nanotubes are formed from bacterial flagella bio-templates having a tubular structure. Successive depositions of metal nanoparticles on the silica nanotubes are performed through easily functionalized silica surfaces. The results show uniform metal nanoparticle sizes and a high surface area coverage. By incorporating gold, palladium and iron oxide nanoparticles, the metallized silica nanotubes gain electrical properties with the potential to create unique nanoelectronic materials. In this study, the metallized silica nanotubes with network structures are aligned and their electrical behaviors are investigated in both dry and wet conditions. The metallized silica nanotubes are found to be electrically conductive along the network structures. The current-voltage characteristics show remarkably improved electrical conductivities depending on the type of metal nanoparticle loading and nanotube network concentration. [ABSTRACT FROM AUTHOR]

This paper presents numerical quasistatic simulation results of the air entrainment phenomenon between a web and a spirally grooved roller. The numerical results show that during one complete rotation of the spirally grooved roller, the traction coefficient between the web and the roller changes with time due to the changing shape of the groove in the contact region, and the average traction coefficient of the cireumferentially grooved roller is higher than that of the spirally grooved roller. Using a laser sensor, web deflection is measured and compared with the numerical results at the inlet. Furthermore, a smoke wire experiment shows a clear view of the air entrainment phenomenon at the entrance, between the web and the roller. [ABSTRACT FROM AUTHOR]

A disposable, self-contained polymerase chain reaction (PCR) chip with on-board stored, just-on-time releasable, paraffin-passivated, dry reagents is described. During both storage and sample preparation, the paraffin immobilizes and protects the stored reagents. Fluid flow through the reactor leaves the reagents undisturbed. Prior to the amplification step, the chamber is filled with target analyte suspended in water. Upon heating the PCR chamber to the DNA's denaturation temperature, the paraffin melts and moves out of the way, and the reagents are released and hydrated. To better understand the reagent release process, a scaled up model of the reactor was constructed and the paraffin migration was visualized. Experiments were carried out with a 30 µl reactor demonstrating detectable amplification (with agarose gel electrophoresis) of 10 fg (∼200 copies) of lambda DNA template. The in-reactor storage and on-time release of the PCR reagents reduce the number of needed operations and significantly simplifies the flow control that would, otherwise, be needed in lab-on-chip devices. [ABSTRACT FROM AUTHOR]

Slippage effects in microchannels that depend on the surface characteristics are investigated, taking into account hydrophilic, hydrophobic, and superhydrophobic wettabilities. Microscale grooves are fabricated along the vertical walls to form superhydrophobic surfaces, which enable both the visualization of the flow field near the walls and the direct measurement of the slip length. Velocity profiles are measured using microparticle image velocimetry and those in hydrophilic glass, hydrophobic polydimethylsiloxane (PDMS), and superhydrophobic PDMS microchannels are compared. For the hydrophilic glass surface, the velocity near the wall smoothly decreases to zero, which is consistent with the well-known, no-slip boundary condition. On the other hand, for the flow in the hydrophobic PDMS microchannel, the velocity profile approaches some finite value at the wall, showing a slip length of approximately 2 μm. In addition, to directly measure the velocity in the superhydrophobic microchannel, transverse groove structures are fabricated along the vertical walls in the microchannel. For this surface, the velocity profile approaches a value that is larger than that for the PDMS case. Incidentally, instabilities in the velocity profile are observed at the interface with the air gap. Furthermore, the velocity profile near the wall shows a larger slip length than for any of the other experimental setups. For groove structures that are high and wide, the liquid meniscus forms curves in the cavity so that a wavy flow is created beyond the grooves. Moreover, if the pitch-to-width ratio of the groove structure increases, meniscus penetration into the cavity is observed. [ABSTRACT FROM AUTHOR]

In this study, we manipulated the swimming direction of bacteria and controlled the switching off movement by using dc and ac galvanotaxis. The microstructures blotted by Serratia marcescens could be spontaneously manipulated and switched off at the desired position. The optimum ac frequency for switching off the microstructural motion was 7 Hz. We built a mathematical model to analyze and understand the oscillating motion of microstructure. [ABSTRACT FROM AUTHOR]

Flight behaviors of charged droplets are presented for electrohydrodynamic (EHD) inkjet printing. Three different kinds of EHD spraying techniques, pulsed dc, ac, and single potential (SP) ac, have been investigated and both conductive and dielectric target surfaces were considered. Experimental results show that the flight paths of charged droplets may deviate from their regular straight route, i.e., directly from the nozzle to the substrate. Depending on the droplet charge and applied electric field, droplets may deflect, reflect, or retreat to the meniscus. We can solve these drawbacks by SP EHD printing. [ABSTRACT FROM AUTHOR]

Recently, inkjet printing technology has become crucial in many industrial fabrication fields mainly due to its advantages of noncontact and fast pattern generation. In this paper, we investigate an electrostatic field induced inkjet printing system, which is based on an electrohydrodynamic process, for drop-on-demand jetting. In order to locate the optimal jetting conditions, we tested jetting performance for various bias voltages and pulse signals. To investigate the characteristics of drop-on-demand operation and micropatterning, we used conductive silver ink and examined the drops and lines patterned on a substrate. [ABSTRACT FROM AUTHOR]

We report on a simple process to fabricate electrohydrodynamic spraying devices with superhydrophobic nozzles. These devices are useful, among other things, in mass spectrometry and printing technology. The superhydrophobic nozzle is created by roughening the surface of the polyfluorotetraethylene (PTFE) by argon and oxygen plasma treatment. We have developed a polymer-based electrospray device with a flat, superhydrophobic nozzle capable of maintaining a high contact angle and stable jetting. [ABSTRACT FROM AUTHOR]

A coffee-ring pattern can be yielded on the three-phase contact line following evaporation of sessile droplets with suspended insoluble solutes, such as particles, DNA molecules, and mammalian cells. The formation of such coffee-ring, together with their suppression has been applied in printing and coating technologies. We present here an experimental study on the assembly of silver nanowires inside an evaporating droplet of a colloidal suspension. The effects of nanowire length and concentration on coffee-ring formation of the colloidal suspension were investigated. Several sizes of NWs with an aspect ratio between 50 and 1000 were systematically investigated to fabricate coffee-ring patterns. Larger droplets containing shorter nanowires formed clearer ring deposits after evaporation. An order-to-disorder transition of the nanowires’ alignment was found inside the rings. A printing technique with the evaporation process enabled fabrication of arrays of silver nanowire rings. We could manipulate the patterns silver nanowire rings, which might be applied to the transparent and flexible electrode. [ABSTRACT FROM AUTHOR]

We demonstrated the fabrication of terahertz metamaterial sensor for the accurate and on-site detection of yeast using electrohydrodynamic jet printing, which is inexpensive, simple, and environmentally friendly. The very small sized pattern up to 5 µm-width of electrical split ring resonator unit structures could be printed on a large area on both a rigid substrate and flexible substrate, i.e. silicon wafer and polyimide film using the drop on demand technique to eject liquid ink containing silver nanoparticles. Experimental characterization and simulation were performed to study their performances in detecting yeast of different weights. It was shown that the metamaterial sensor fabricated on a flexible polyimide film had higher sensitivity by more than six times than the metamaterial sensor fabricated on a silicon wafer, due to the low refractive index of the PI substrate and due to the extremely thin substrate thickness which lowers the effective index further. The resonance frequency shift saturated when the yeast weights were 145 µg and 215 µg for metamaterial structures with gap size 6.5 µm fabricated on the silicon substrate and on the polyimide substrate, respectively. [ABSTRACT FROM AUTHOR]

Recently, the three-dimensional (3D) printing technique has received much attention for shape forming and manufacturing. The fused deposition modeling (FDM) printer is one of the various 3D printers available and has become widely used due to its simplicity, low-cost, and easy operation. However, the FDM technique has a limitation whereby its patterning resolution is too low at around 200 μm. In this paper, we first present a hybrid mechanism of electrohydrodynamic jet printing with the FDM technique, which we name E-FDM. We then develop a novel high-resolution 3D printer based on the E-FDM process. To determine the optimal condition for structuring, we also investigated the effect of several printing parameters, such as temperature, applied voltage, working height, printing speed, flow-rate, and acceleration on the patterning results. This method was capable of fabricating both high resolution 2D and 3D structures with the use of polylactic acid (PLA). PLA has been used to fabricate scaffold structures for tissue engineering, which has different hierarchical structure sizes. The fabrication speed was up to 40 mm/s and the pattern resolution could be improved to 10 μm. [ABSTRACT FROM AUTHOR]

The fabrication of 3D metamaterials, such as multilayer structures, is of great interest in practical applications of the metamaterial. Here we present an electrohydrodynamic jet printing technique as a direct fabrication method of 3D multilayer metamaterial. By alignment of the nozzle movement, we could fabricate multiple layers of the metamaterial. Controlling an electrical pulse to make droplets on-demand, we fabricated a high refractive index metamaterial and compared the optical performances of a single layer and multiple layers, with 10 µm width and 5 µm gap of I-shaped meta-atoms on the polyimide substrate. The peak refractive index was 25.7 at 0.46 THz for a four-layer metamaterial. [ABSTRACT FROM AUTHOR]

Invisible Ag mesh transparent electrodes (TEs), with a width of 7 μm, were prepared on a curved glass surface by electrohydrodynamic (EHD) jet printing. With a 100 μm pitch, the EHD jet printed the Ag mesh on the convex glass which had a sheet resistance of 1.49 Ω/□. The printing speed was 30 cm s−1 using Ag ink, which had a 10 000 cPs viscosity and a 70 wt% Ag nanoparticle concentration. We further showed the performance of a 3-D transparent heater using the Ag mesh transparent electrode. The EHD jet printed an invisible Ag grid transparent electrode with good electrical and optical properties with promising applications on printed optoelectronic devices. [ABSTRACT FROM AUTHOR]