Search

This editorial discusses the importance of job integration and reintegration for individuals with neuromuscular disorders and how advancements in technology can aid in this process. It emphasizes the need for rehabilitation, medical and surgical treatments, and ergonomic interventions to enable these individuals to fully benefit from vocational rehabilitation and overcome barriers to employment. The editorial also highlights the European Union's efforts to improve the social and economic status of persons with disabilities and the use of wearable monitoring sensors, feedback devices, exoskeletons, and collaborative robots in movement-related elements. The article proposes the use of a mobile collaborative robot with an interaction-assistive whole-body interface to help individuals who struggle with balance. [Extracted from the article]

The central nervous system (CNS) controls movements and regulates joint stiffness with muscle co-activation, but until now, few studies have examined muscle pairs during running. This study aims to investigate differences in lower limb muscle coactivation during gait at different speeds, from walking to running. Nineteen healthy runners walked and ran at speeds ranging from 0.8 km/h to 9.3 km/h. Twelve lower limb muscles' co-activation was calculated using the time-varying multi-muscle co-activation function (TMCf) with global, flexor–extension, and rostro–caudal approaches. Spatiotemporal and kinematic parameters were also measured. We found that TMCf, spatiotemporal, and kinematic parameters were significantly affected by gait speed for all approaches. Significant differences were observed in the main parameters of each co-activation approach and in the spatiotemporal and kinematic parameters at the transition between walking and running. In particular, significant differences were observed in the global co-activation (CIglob, main effect F(1,17) = 641.04, p < 0.001; at the transition p < 0.001), the stride length (main effect F(1,17) = 253.03, p < 0.001; at the transition p < 0.001), the stride frequency (main effect F(1,17) = 714.22, p < 0.001; at the transition p < 0.001) and the Center of Mass displacement in the vertical (CoMy, main effect F(1,17) = 426.2, p < 0.001; at the transition p < 0.001) and medial–lateral (CoMz, main effect F(1,17) = 120.29 p < 0.001; at the transition p < 0.001) directions. Regarding the correlation analysis, the CoMy was positively correlated with a higher CIglob (r = 0.88, p < 0.001) and negatively correlated with Full Width at Half Maximum (FWHMglob, r = −0.83, p < 0.001), whereas the CoMz was positively correlated with the global Center of Activity (CoAglob, r = 0.97, p < 0.001). Positive and negative strong correlations were found between global co-activation parameters and center of mass displacements, as well as some spatiotemporal parameters, regardless of gait speed. Our findings suggest that walking and running have different co-activation patterns and kinematic characteristics, with the whole-limb stiffness exerted more synchronously and stably during running. The co-activation indexes and kinematic parameters could be the result of global co-activation, which is a sensory-control integration process used by the CNS to deal with more demanding and potentially unstable tasks like running. [ABSTRACT FROM AUTHOR]

We present an avatar system designed to facilitate the embodiment of humanoid robots by human operators, validated through iCub3, a humanoid developed at the Istituto Italiano di Tecnologia. More precisely, the paper makes two contributions: First, we present the humanoid iCub3 as a robotic avatar that integrates the latest significant improvements after about 15 years of development of the iCub series. Second, we present a versatile avatar system enabling humans to embody humanoid robots encompassing aspects such as locomotion, manipulation, voice, and facial expressions with comprehensive sensory feedback including visual, auditory, haptic, weight, and touch modalities. We validated the system by implementing several avatar architecture instances, each tailored to specific requirements. First, we evaluated the optimized architecture for verbal, nonverbal, and physical interactions with a remote recipient. This testing involved the operator in Genoa and the avatar in the Biennale di Venezia, Venice—about 290 kilometers away—thus allowing the operator to visit the Italian art exhibition remotely. Second, we evaluated the optimized architecture for recipient physical collaboration and public engagement on stage, live, at the We Make Future show, a prominent world digital innovation festival. In this instance, the operator was situated in Genoa while the avatar operated in Rimini—about 300 kilometers away—interacting with a recipient who entrusted the avatar with a payload to carry on stage before an audience of approximately 2000 spectators. Third, we present the architecture implemented by the iCub Team for the All Nippon Airways (ANA) Avatar XPrize competition. [ABSTRACT FROM AUTHOR]

This study aims at evaluating upper limb muscle coordination and activation in workers performing an actual use-case manual material handling (MMH). The study relies on the comparison of the workers' muscular activity while they perform the task, with and without the help of a dual-arm cobot (BAZAR). Eleven participants performed the task and the flexors and extensors muscles of the shoulder, elbow, wrist, and trunk joints were recorded using bipolar electromyography. The results showed that, when the particular MMH was carried out with BAZAR, both upper limb and trunk muscular co-activation and activation were decreased. Therefore, technologies that enable human-robot collaboration (HRC), which share a workspace with employees, relieve employees of external loads and enhance the effectiveness and calibre of task completion. Additionally, these technologies improve the worker's coordination, lessen the physical effort required to interact with the robot, and have a favourable impact on his or her physiological motor strategy. Practitioner summary: Upper limb and trunk muscle co-activation and activation is reduced when a specific manual material handling was performed with a cobot than without it. By improving coordination, reducing physical effort, and changing motor strategy, cobots could be proposed as an ergonomic intervention to lower workers' biomechanical risk in industry. [ABSTRACT FROM AUTHOR]

Biomechanical overload is considered a significant occupational risk in manufacturing and a potential cause of musculoskeletal disorders. This research aims to introduce new methodologies for the quantitative risk evaluation of biomechanical risk by combining surface electromyography with a motion acquisition system based on inertial measurement units. Due to the lack of experimental data in the literature acquired in a real industrial environment during the working shift, an on-the-field study regarding an automotive assembly line workstation has been carried out in collaboration with Fiat Chrysler Automobiles Italy S.p.A. Data related to the trunk flexion forward and the erector spinae muscle activity have been acquired for several consecutive working cycles by considering three different workers. Data analyses indicated kinematic and muscular activity patterns consistent with those expected and that the proposed wearable technologies can be integrated and used simultaneously during work activities. Furthermore, the results demonstrated data repeatability, strengthening the feasibility and usefulness of the combined use of kinematic and electromyography technologies to assess biomechanical overload in production lines. This study could lay the bases for the future definition of a method for assessing biomechanical overload due to awkward postures. [ABSTRACT FROM AUTHOR]

Background: Balance impairment is a common disability in post-stroke survivors, leading to reduced mobility and increased fall risk. Robotic gait training (RAGT) is largely used, along with traditional training. There is, however, no strong evidence about RAGT superiority, especially on balance. This study aims to determine RAGT efficacy on balance of post-stroke survivors. Methods: PubMed, Cochrane Library, and PeDRO databases were investigated. Randomized clinical trials evaluating RAGT efficacy on post-stroke survivor balance with Berg Balance Scale (BBS) or Timed Up and Go test (TUG) were searched. Meta-regression analyses were performed, considering weekly sessions, single-session duration, and robotic device used. Results: A total of 18 trials have been included. BBS pre-post treatment mean difference is higher in RAGT-treated patients, with a pMD of 2.17 (95% CI 0.79; 3.55). TUG pre-post mean difference is in favor of RAGT, but not statistically, with a pMD of −0.62 (95%CI − 3.66; 2.43). Meta-regression analyses showed no relevant association, except for TUG and treatment duration (β = −1.019, 95% CI − 1.827; −0.210, p-value = 0.0135). Conclusions: RAGT efficacy is equal to traditional therapy, while the combination of the two seems to lead to better outcomes than each individually performed. Robot-assisted balance training should be the focus of experimentation in the following years, given the great results in the first available trials. Given the massive heterogeneity of included patients, trials with more strict inclusion criteria (especially time from stroke) must be performed to finally define if and when RAGT is superior to traditional therapy. [ABSTRACT FROM AUTHOR]

BACKGROUND: Robot-based treatments are developing in neurorehabilitation settings. Recently, the Italian National Health Systems recognized robot-based rehabilitation as a refundable service. Thus, the Italian neurorehabilitation community promoted a national consensus on this topic. OBJECTIVE: To conceptualize undisclosed perspectives for research and applications of robotics for neurorehabilitation, based on a qualitative synthesis of reference theoretical models. METHODS: A scoping review was carried out based on a specific question from the consensus Jury. A foreground search strategy was developed on theoretical models (context) of robot-based rehabilitation (exposure), in neurological patients (population). PubMed and EMBASE® databases were searched and studies on theoretical models of motor control, neurobiology of recovery, human-robot interaction and economic sustainability were included, while experimental studies not aimed to investigate theoretical frameworks, or considering prosthetics, were excluded. RESULTS: Overall, 3699 records were screened and finally 9 papers included according to inclusion and exclusion criteria. According to the population investigated, structured information on theoretical models and indications for future research was summarized in a synoptic table. CONCLUSION: The main indication from the Italian consensus on robotics in neurorehabilitation is the priority to design research studies aimed to investigate the role of robotic and electromechanical devices in promoting neuroplasticity. [ABSTRACT FROM AUTHOR]

Individuals of working age affected by neuromuscular disorders frequently experience issues with their capacity to get employment, difficulty at work, and premature work interruption. Anyway, individuals with a disability could be able to return to work, thanks to targeted rehabilitation as well as ergonomic and training interventions. Biomechanical and physiological indexes are important for evaluating motor and muscle performance and determining the success of job integration initiatives. Therefore, it is necessary to determinate which indexes from the literature are the most appropriate to evaluate the effectiveness and efficiency of the return-to-work programs. To identify current and future valuable indexes, this study uses a systematic literature review methodology for selecting articles published from 2011 to March 30, 2021 fromScopus, Web of Science, and PubMed and for checking the eligibility and the potential bias risks. The most used indexes for motor performance assessment were identified, categorized, and analyzed. This review revealed a great potential for kinetic, kinematic, surface electromyography, postural, and other biomechanical and physiological indexes to be used for job integration/reintegration. Indeed, wearable miniaturized sensors, kinematic, kinetic, and sEMG-based indexes can be used to control collaborative robots, classify residual motor functions, and assess pre-post-rehabilitation and ergonomic therapies. [ABSTRACT FROM AUTHOR]

Lifting tasks, among manual material handling activities, are those mainly associated with low back pain. In recent years, several instrumental-based tools were developed to quantitatively assess the biomechanical risk during lifting activities. In this study, parameters related to balance and extracted from the Centre of Pressure (CoP) data series are studied in fatiguing frequency-dependent lifting activities to: i) explore the possibility of classifying people with LBP and asymptomatic people during the execution of task; ii) examine the assessment of the risk levels associated with repetitive lifting activities, iii) enhance current understanding of postural control strategies during lifting tasks. Data were recorded from 14 asymptomatic participants and 7 participants with low back pain. The participants performed lifting tasks in three different lifting conditions (with increasing lifting frequency and risk levels) and kinetic and surface electromyography (sEMG) data were acquired. Kinetic data were used to calculated the CoP and parameters extracted from the latter show a discriminant capacity for the groups and the risk levels. Furthermore, sEMG parameters show a trend compatible with myoelectric manifestations of muscular fatigue. Correlation results between sEMG and CoP velocity parameters revealed a positive correlation between amplitude sEMG parameters and CoP velocity in both groups and a negative correlation between frequency sEMG parameters and CoP velocity. The current findings suggest that it is possible to quantitatively assess the risk level when monitoring fatiguing lifting tasks by using CoP parameters as well as identify different motor strategies between people with and without LBP. [ABSTRACT FROM AUTHOR]

In the last two decades, a growing interest has been focused on gait and balance robot-assisted rehabilitation in children with neurological disabilities. Robotic devices allow the implementation of intensive, task-specific training fostering functional recovery and neuroplasticity phenomena. However, limited attention has been paid to the protocols used in this research framework. This systematic review aims to provide an overview of the existing literature on robotic systems for the rehabilitation of gait and balance in children with neurological disabilities and their rehabilitation applications. The literature search was carried out independently and synchronously by three authors on the following databases: MEDLINE, Cochrane Library, PeDro, Institute of Electrical and Electronics Engineers, ScienceDirect, and Google Scholar. The data collected included three subsections referring to clinical, technical, and regulatory aspects. Thirty-one articles out of 81 found on the primary literature search were included in the systematic review. Most studies involved children with cerebral palsy. Only one-third of the studies were randomized controlled trials. Overall, 17 devices (nine end-effector systems and eight exoskeletons) were investigated, among which only 4 (24%) were bore the CE mark. Studies differ on rehabilitation protocols duration, intensity, and outcome measures. Future research should improve both rehabilitation protocols' and devices' descriptions. [ABSTRACT FROM AUTHOR]

Abstract Background Modulation of nociceptive withdrawal reflex (NWR) excitability was evaluated during gait initiation in 10 healthy subjects to investigate how load- and movement-related joint inputs activate lower spinal centres in the transition from quiet stance to walking. A motion analysis system integrated with a surface EMG device was used to acquire kinematic, kinetic and EMG variables. Starting from a quiet stance, subjects were asked to walk forward, at their natural speed. The sural nerve was stimulated and EMG responses were recorded from major hip, knee and ankle muscles. Gait initiation was divided into four subphases based on centre of pressure and centre of mass behaviours, while joint displacements were used to categorise joint motion as flexion or extension. The reflex parameters were measured and compared between subphases and in relation to the joint kinematics. Results The NWR was found to be subphase-dependent. NWR excitability was increased in the hip and knee flexor muscles of the starting leg, just prior to the occurrence of any movement, and in the knee flexor muscles of the same leg as soon as it was unloaded. The NWR was hip joint kinematics-dependent in a crossed manner. The excitability of the reflex was enhanced in the extensor muscles of the standing leg during the hip flexion of the starting leg, and in the hip flexors of the standing leg during the hip extension of the starting leg. No notable reflex modulation was observed in the ankle muscles. Conclusions Our findings show that the NWR is modulated during the gait initiation phase. Leg unloading and hip joint motion are the main sources of the observed modulation and work in concert to prepare and assist the starting leg in the first step while supporting the contralateral leg, thereby possibly predisposing the lower limbs to the cyclical pattern of walking.

Introduction: Gait deficits are debilitating in people with Parkinson's disease (PwPD), which inevitably deteriorate over time. Gait analysis is a valuable method to assess disease-specific gait patterns and their relationship with the clinical features and progression of the disease. Objectives: Our study aimed to i) develop an automated diagnostic algorithm based on machine-learning techniques (artificial neural networks [ANNs]) to classify the gait deficits of PwPD according to disease progression in the Hoehn and Yahr (H-Y) staging system, and ii) identify a minimum set of gait classifiers. Methods: We evaluated 76 PwPD (H-Y stage 1–4) and 67 healthy controls (HCs) by computerized gait analysis. We computed the time-distance parameters and the ranges of angular motion (RoMs) of the hip, knee, ankle, trunk, and pelvis. Principal component analysis was used to define a subset of features including all gait variables. An ANN approach was used to identify gait deficits according to the H-Y stage. Results: We identified a combination of a small number of features that distinguished PwPDs from HCs (one combination of two features: knee and trunk rotation RoMs) and identified the gait patterns between different H-Y stages (two combinations of four features: walking speed and hip, knee, and ankle RoMs; walking speed and hip, knee, and trunk rotation RoMs). Conclusion: The ANN approach enabled automated diagnosis of gait deficits in several symptomatic stages of Parkinson's disease. These results will inspire future studies to test the utility of gait classifiers for the evaluation of treatments that could modify disease progression. [ABSTRACT FROM AUTHOR]

Patients affected by neurological pathologies with motor disorders when they are of working age have to cope with problems related to employability, difficulties in working, and premature work interruption. It has been demonstrated that suitable job accommodation plans play a beneficial role in the overall quality of life of pathological subjects. A well-designed return-to-work program should consider several recent innovations in the clinical and ergonomic fields. One of the instrument-based methods used to monitor the effectiveness of ergonomic interventions is surface electromyography (sEMG), a multi-channel, non-invasive, wireless, wearable tool, which allows in-depth analysis of motor coordination mechanisms. Although the scientific literature in this field is extensive, its use remains significantly underexploited and the state-of-the-art technology lags expectations. This is mainly attributable to technical and methodological (electrode-skin impedance, noise, electrode location, size, configuration and distance, presence of crosstalk signals, comfort issues, selection of appropriate sensor setup, sEMG amplitude normalization, definition of correct sEMG-related outcomes and normative data) and cultural limitations. The technical and methodological problems are being resolved or minimized also thanks to the possibility of using reference books and tutorials. Cultural limitations are identified in the traditional use of qualitative approaches at the expense of quantitative measurement-based monitoring methods to design and assess ergonomic interventions and train operators. To bridge the gap between the return-to-work rehabilitation and other disciplines, several teaching courses, accompanied by further electrodes and instrumentations development, should be designed at all Bachelor, Master and PhD of Science levels to enhance the best skills available among physiotherapists, occupational health and safety technicians and ergonomists. [ABSTRACT FROM AUTHOR]

Work-related low-back disorders (WLBDs) can be caused by manual lifting tasks. Wearable devices used to monitor these tasks can be one possible way to assess the main risk factors for WLBDs. This study aims at analyzing the sensitivity of kinematic data to the risk level changes, and to define an instrument-based tool for risk classification by using kinematic data and artificial neural networks (ANNs). Twenty workers performed lifting tasks, designed by following the rules of the revised NIOSH lifting equation, with an increasing lifting index (LI). From the acquired kinematic data, we computed smoothness parameters together with kinetic, potential and mechanical energy. We used ANNs for mapping different set of features on LI levels to obtain an automatic risk estimation during these tasks. The results show that most of the calculated kinematic indexes are significantly affected by changes in LI and that all the lifting condition pairs can be correctly distinguished. Furthermore, using specific set of features, different topologies of ANNs can lead to a reliable classification of the biomechanical risk related to lifting tasks. In particular, the training sets and numbers of neurons in each hidden layer influence the ANNs performance, which is instead independent from the numbers of hidden layers. Reliable biomechanical risk estimation can be obtained by using training sets combining body and load kinematic features. [ABSTRACT FROM AUTHOR]

The design of patient-tailored rehabilitative protocols represents one of the crucial factors that influence motor recovery mechanisms, such as neuroplasticity. This approach, including the patient in the control loop and characterized by a control strategy adaptable to the user's requirements, is expected to significantly improve functional recovery in robot-aided rehabilitation. In this paper, a novel 3D bio-cooperative robotic platform is developed. A new arm-weight support system is included into an operational robotic platform for 3D upper limb robot-aided rehabilitation. The robotic platform is capable of adapting therapy characteristics to specific patient needs, thanks to biomechanical and physiological measurements, and thus closing the subject in the control loop. The level of arm-weight support and the level of the assistance provided by the end-effector robot are varied on the basis of muscular fatigue and biomechanical indicators. An assistance-as-needed approach is applied to provide the appropriate amount of assistance. The proposed platform has been experimentally validated on 10 healthy subjects; they performed 3D point-to-point tasks in two different conditions, i.e., with and without assistance-as-needed. The results have demonstrated the capability of the proposed system to properly adapt to real needs of the patients. Moreover, the provided assistance was shown to reduce the muscular fatigue without negatively influencing motion execution. [ABSTRACT FROM AUTHOR]

The aims of this study were: (i) to determine kinematic, kinetic, and electromyographic characteristics of Junzuki karate punch in professional karate athletes; (ii) to identify biomechanical parameters that correlate with punch force and lead to a higher punching performance; (iii) to verify the presence of muscle co-activation in the upper limb, trunk, and lower limb muscles. Data were collected from nine experienced karatekas from the Accademia Italiana Karate e Arti Marziali during the execution of the specific punch. Mean punch forces (181.2 N) delivered to the target, the range of motion of both right and left knees (1.13 and 0.82 rad) and right elbow (1.49 rad) joints, and the angles at impact (knee: 0.81 and 0.91 rad; elbow: 1.19 rad) in the sagittal plane were computed. Furthermore, the trunk rotational angular acceleration (63.1 rad s-2), force related to the lower limbs (550.2 and 425.1 N), and co-activation index for the upper limb (36.1% and 34.7%), trunk (24.5% and 16%), and lower limbs (16.0% and 16.1%) muscles were evaluated bilaterally. Significant positive correlations were found between the punch force and both right and left knee flexion at the instant of impact and right and left leg force. Significant negative correlation was found between the punch force and maximum trunk angular acceleration. Significant differences (p = .03) in the co-activation index among the upper limb, trunk, and lower limbs muscles highlighted a rostro-caudal gradient on both body sides. This research could be of use to performers and coaches when considering training preparations. [ABSTRACT FROM AUTHOR]

A formal machine reader is a tool able to transform natural language text into formal structured knowledge so as the latter can be interpreted by machines, according to a shared semantics. FRED is a formal machine reader for the semantic web: its output is a RDF/OWL graph, whose design is based on frame semantics. FRED's graph are domain- and task-independent, making the tool suitable to be used as a semantic middleware for domain- or task-specific applications. To serve this purpose, it is available both as REST service and as Python library. This paper provides details about FRED's capabilities, design issues, implementation and evaluation. [ABSTRACT FROM AUTHOR]

The aims of the present work were: to calculate lifting energy consumption (LEC) in work activities designed to have a growing lifting index (LI) by means of revised NIOSH lifting equation; to evaluate the relationship between LEC and forces at the L5-S1 joint. The kinematic and kinetic data of 20 workers were recorded during the execution of lifting tasks in three conditions. We computed kinetic, potential and mechanical energy and the corresponding LEC by considering three different centers of mass of: 1) the load (CoML); 2) the multi-segment upper body model and load together (CoMUpp+L); 3) the whole body and load together (CoMTot). We also estimated compression and shear forces. Results shows that LEC calculated for CoMUpp+L and CoMTot grew significantly with the LI and that all the lifting condition pairs are discriminated. The correlation analysis highlighted a relationship between LEC and forces that determine injuries at the L5-S1 joint. [ABSTRACT FROM AUTHOR]

Background: Spastic gait is a key feature in patients with hereditary spastic paraparesis, but the gait characterization and the relationship between the gait impairment and clinical characteristics have not been investigated. Objectives: To describe the gait patterns in hereditary spastic paraparesis and to identify subgroups of patients according to specific kinematic features of walking. Methods: We evaluated fifty patients by computerized gait analysis and compared them to healthy participants. We computed time-distance parameters of walking and the range of angular motion at hip, knee, and ankle joints, and at the trunk and pelvis. Lower limb joint moments and muscle co-activation values were also evaluated. Results: We identified three distinct subgroups of patients based on the range of motion values. Subgroup one was characterized by reduced hip, knee, and ankle joint range of motion. These patients were the most severely affected from a clinical standpoint, had the highest spasticity, and walked at the slowest speed. Subgroup three was characterized by an increased hip joint range of motion, but knee and ankle joint range of motion values close to control values. These patients were the most mildly affected and had the highest walking speed. Finally, subgroup two showed reduced knee and ankle joint range of motion, and hip range of motion values close to control values. Disease severity and gait speed in subgroup two were between those of subgroups one and three. Conclusions: We identified three distinctive gait patterns in patients with hereditary spastic paraparesis that correlated robustly with clinical data. Distinguishing specific features in the gait patterns of these patients may help tailor pharmacological and rehabilitative treatments and may help evaluate therapeutic effects over time. [ABSTRACT FROM AUTHOR]

BACKGROUND: There are few epidemiological data regarding musculoskeletal disorders (MSDs) in retail industry. Biomechanical risk assessment in ergonomics is commonly performed in retail sector using standardized protocols. However, such protocols have numerous limitations, such as the lack of objectivity or applicability and restrictive conditions. OBJECTIVE: The aim of this study was to analyze one of the most commonly used shelves in vegetable and fruit departments in order to investigate the effect of different shelf levels (i.e. with variations in height and horizontal distance) and load weights on the workers' biomechanical load. METHODS: We investigated trunk, shoulder, elbow, hip, knee and ankle joint ROMs, as well as the mean and peak EMG values of the upper limb, trunk and lower limb muscles. RESULTS: We found that shelf level has a significant effect on most of the parameters examined, whereas within this limited range of 6 and 8 kg, weight does not affect the biomechanical load. We also identified the shelf levels that place the least and most strain on the musculoskeletal system. CONCLUSIONS: We therefore recommend that the height and horizontal distance be carefully considered when shelves are being designed. Kinematic and EMG approach may help to objectively assess shelf-related risks. Our findings are in agreement with RNLE LI values and therefore support RNLE. [ABSTRACT FROM AUTHOR]

Low-back disorders (LBDs) are the most common and costly musculoskeletal problem. Muscle co-activation, a mechanism that stabilises the spine, is adopted by the central nervous system to provide added protection and avoid LBDs. However, during high-risk lifting tasks, the compressive load on the spine grows owing to increased co-activation. The aim of this study was to develop a method for the sample-by-sample monitoring of the co-activation of more than two muscles, and to compare this method with agonist–antagonist methods. We propose a time-varying multi-muscle co-activation function that considers electromyographic (EMG) signals as input. EMG data of 10 healthy subjects were recorded while they manually lifted loads at three progressively heavier conditions. The repeated measures ANOVA revealed a significant effect of lifting condition on our co-activation index. Heavier conditions resulted in higher muscle co-activation values. Significant correlations were found between the time-varying multi-muscle co-activation index and other agonist–antagonist methods. Practitioner Summary:We have developed a method to quantify muscle co-activation during the execution of a lifting task. To do this we used surface electromyography. Our algorithm provides a measure of time-varying co-activation between more than two muscles. [ABSTRACT FROM AUTHOR]

Copyright of Giornale Italiano di Medicina del Lavoro ed Ergonomia is the property of Giornale Italiano di Medicina del Lavoro ed Ergonomia Editorial Board and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Lifting tasks are manual material-handling activities and are commonly associated with work-related low back disorders. Instrument-based assessment tools are used to quantitatively assess the biomechanical risk associated with lifting activities. This study aims at highlighting different motor strategies in people with and without low back pain (LBP) during fatiguing frequency-dependent lifting tasks by using parameters of muscle coactivation. A total of 15 healthy controls (HC) and eight people with LBP performed three lifting tasks with a progressively increasing lifting index (LI), each lasting 15 min. Bilaterally erector spinae longissimus (ESL) activity and rectus abdominis superior (RAS) were recorded using bipolar surface electromyography systems (sEMG), and the time-varying multi-muscle coactivation function (TMCf) was computed. The TMCf can significantly discriminate each pair of LI and it is higher in LBP than HC. Collectively, our findings suggest that it is possible to identify different motor strategies between people with and without LBP. The main finding shows that LBP, to counteract pain, coactivates the trunk muscles more than HC, thereby adopting a strategy that is stiffer and more fatiguing. [ABSTRACT FROM AUTHOR]