Search

The anterior cruciate ligament (ACL) is crucial for knee stability and is often injured in sports, leading to significant issues like degenerative changes and meniscal tears. ACL tears are prevalent in high-school sports injuries, accounting for 50% of knee injuries in the U.S. Surgical reconstruction, often involving bone-patellar tendon-bone (BPTB) or hamstring autografts, is common, with varying success rates and complications. Emerging alternatives like the peroneus longus tendon show promise but require further comparative studies. This prospective and multicentric study included 110 patients who underwent ACL reconstruction from 2020 to 2022. Fifty-five patients received hamstring tendon autografts (Group H) and fifty-five received peroneus longus tendon autografts (Group P). Surgeries were performed by experienced surgeons using standardized techniques. Patients were evaluated using clinical tests and functional scores including the Lysholm Knee Questionnaire and IKDC-2000 at various postoperative intervals up to 24 months. Data were analyzed using SPSS with a significance level set at p < 0.05. Group H showed superior knee function preoperatively and at 24 months postoperatively compared to Group P. Group H had higher Lysholm and IKDC scores consistently throughout the study period. The anterior drawer and Lachman’s tests indicated better knee stability for Group H. Complications were comparable between groups, with specific issues related to donor site morbidity and muscle weakness observed in each. The six-strand hamstring tendon autograft (Group H) demonstrated superior functional outcomes and knee stability compared to the peroneus longus tendon autograft (Group P) for ACL reconstruction. Despite some donor site morbidity, the hamstring tendon showed better long-term recovery and fewer complications. Future studies should explore larger, multicentric cohorts and integrate regenerative medicine techniques to further enhance ACL reconstruction outcomes.

Introduction: Anterior Cruciate Ligament (ACL) injuries are a major concern in orthopedics, particularly affecting active individuals and often necessitating surgery. The incidence of ACL injuries is rising, especially in women, comprising half of knee joint injuries. These injuries, common in sports with pivoting actions, can lead to long-term joint issues like osteoarthritis. Advances in surgical methods and understanding of postoperative recovery are crucial for improving patient outcomes, with considerations for graft size, material, and reconstruction technique critical in the rehabilitation process. Material and Methods: A systematic review was conducted by searching PubMed, MEDLINE, and SCOPUS for studies from 2009 to 10 February 2024, focusing on “six-strand hamstring graft” outcomes in ACL reconstruction. Inclusion criteria were English publications on 6HS autografts’ biomechanical and clinical outcomes. Excluded were non-specific, BTB, or hybrid studies, and non-research articles. Out of 347 records, 9 were analyzed after rigorous screening and quality assessment. This review, emphasizing six-strand hamstring autografts, enriches orthopedic knowledge, particularly for ACL surgery. Results: This review evaluated studies on six-strand hamstring (6HS) autografts for ACL reconstruction, encompassing prospective, retrospective, and cadaveric studies with subjects ranging from 12 to 413. Findings indicate that 6HS autografts enhance knee stability and increase graft diameter, correlating with reduced graft failure rates and improved clinical outcomes, including high patient satisfaction and low re-injury rates. Rehabilitation varied, with recovery times quicker due to larger graft sizes, and most studies reported low complication rates, underscoring 6HS autografts’ efficacy in ACL surgery. Conclusions: Performing 6HS autografts in ACL reconstruction reveals that they offer improved knee stability and graft diameter, leading to better clinical outcomes. These autografts are associated with high patient satisfaction and low re-injury rates, suggesting their effectiveness in mimicking native ACL function and enhancing rehabilitation. However, research limitations highlight the need for further long-term, comprehensive studies.

The detection and defense against foreign agents and pathogens by the innate immune system is a crucial mechanism in the body. A comprehensive understanding of the signaling mechanisms involved in innate immunity is essential for developing effective diagnostic tools and therapies for infectious diseases. Innate immune response is a complex process involving recognition of pathogens through receptors, activation of signaling pathways, and cytokine production, which are all crucial for deploying appropriate countermeasures. Non-coding RNAs (ncRNAs) are vital regulators of the immune response during infections, mediating the body's defense mechanisms. However, an overactive immune response can lead to tissue damage, and maintaining immune homeostasis is a complex process in which ncRNAs play a significant role. Recent studies have identified microRNAs (miRNAs) and long non-coding RNAs (lncRNAs) as key players in controlling gene expression in innate immune pathways, thereby participating in antiviral defenses, tumor immunity, and autoimmune diseases. MiRNAs act by regulating host defense mechanisms against viruses, bacteria, and fungi by targeting mRNA at the post-transcriptional level, while lncRNAs function as competing RNAs, blocking the binding of miRNAs to mRNA. This review provides an overview of the regulatory role of miRNAs and lncRNAs in innate immunity and its mechanisms, as well as highlights potential future research directions, including the expression and maturation of new ncRNAs and the conservation of ncRNAs in evolution.

BackgroundTridimensional medical knowledge of human anatomy is a key step in the undergraduate and postgraduate medical education, especially in surgical fields. Training simulation before real surgical procedures is necessary to develop clinical competences and to minimize surgical complications.MethodsLatex injection of vascular system in brain and in head-neck segment is made after washing out of the vascular system and fixation of the specimen before and after latex injection.ResultsUsing this latex injection technique, the vascular system of 90% of brains and 80% of head-neck segments are well-perfused. Latex-injected vessels maintain real appearance compared to silicone, and more flexible vessels compared to resins. Besides, latex makes possible a better perfusion of small vessels.ConclusionsLatex vascular injection technique of the brain and head-neck segment is a simulation model for neurosurgical training based on real experiencing to improve surgical skills and surgical results.

Background: The sciatic nerve (SN) is the widest nerve of the human body that exits the pelvis through the greater sciatic foramen, usually below the piriformis muscle (PM), and descends between the greater trochanter of the femur and ischial tuberosity of the pelvis to the knee. The aim of this paper is to examine and identify the SN variations in relation to the PM, its prevalence, pattern, and course. Methods: A prospective-descriptive cross-sectional study was carried out to determine the frequency of anatomical variations in the exit of the SN in relation with the PM in 20 anatomical bodies (corpses) of both genders, in equal numbers. Results: The dissection of 40 SNs in corpses of both sexes in equal numbers showed that the SN exited inferior to the PM in 37 lower limbs (92.5%); between the fascicles of the PM and inferior to the PM in two lower limbs (5%); and in one thigh, between the fascicles of the PM and superior to the PM (2.5%). Our study reported that the SN divides in its terminal branches more commonly in the proximal part of the popliteal fossa in 55% of cases, in the gluteal region in 35% of cases, and in the middle third of the thigh in 10% of cases. Conclusions: Anatomical variations of the SN in relation to the PM are challenging for the diagnostic and therapeutic procedure in many clinical and surgical cases. Rapid recognition of the SN changes makes surgical approaches more accurate and effective. Our study confirmed that the SN exits the pelvis most commonly below the PM, although some anatomical variations may occur.

Objectives: Variations in the morphological anatomy of the median nerve such as formation, distribution, and communication have been well documented. All these variations should be taken into account when practicing any surgical approach for the treatment of injuries affecting the median nerve. Furthermore, they are of the utmost importance for interpretation of the clinical presentation. Methods: The objective of this investigation was to determine the anatomical variations in the formation of the median nerve in cadavers at the Forensic Pathology department in Central Clinical Hospital of the Academy of Sciences of the Russian Federation between January 2022 and April 2022. A descriptive, cross-sectional, and prospective information source study was conducted on 42 anatomical bodies (corpses) and 84 brachial plexuses. Results: After analyzing the results obtained in this investigation, we concluded that the median nerve presented variation in its formation in 22.6% of the investigated cases. These variations were more common in males (81.8%) than females (18.2%). The anatomical variation was unilateral in 7.1% and bilateral in 19% of all anatomical bodies examined. Conclusions: The median nerve presented a great number of variations in its formation in roughly 23% of the anatomical bodies, with male being the predominant gender. Furthermore, the most frequent region of formation was the axillary region (92.9%). For clinicians, it is important to remember these variations during surgical procedures in this area and during brachial plexus block.

Background: The trunk of the basilar artery has not been included in microanatomy studies. Anatomical variants of the perforant branches of the vertebrobasilar trunk and their relationship with neural structures are very important in surgical approaches. Surgical dissection for the treatment of vascular lesions requires a perfect knowledge of the microsurgical anatomy. Methods: We conducted a descriptive analysis of 50 brains, which were fixed with formalin at 10% for 2 weeks, and the arterial system was injected with colored latex. After microsurgical dissection, it was divided into three segments: the lower portion went from the anterior spinal artery to the anteroinferior cerebellar artery, the middle segment was raised from the upper limit of the lower portion to the origin of the superior cerebellar artery, and the upper segment ranged from the previous portion until the origin of the posterior cerebral artery. Results: The basilar artery had an average length of 30 mm. The average diameter at its junction with the vertebral arteries was 4.05 mm. The average middle segment was 3.4 mm in diameter and 15.2 mm in length. The diameter of the upper segment was 4.2 mm, and its average length was 3.6 mm. The average number of bulbar arteries was three, and their average diameter was 0. 66 mm. The number of caudal perforator arteries were five on average, with a diameter of 0.32 mm. We found three rare cases of anatomical variants in the vertebra–basilar junction. Conclusions: The basilar artery emits penetrating branches in its lower, middle, and upper portions. The origin of penetrating branches was single or divided after forming a trunk. However, we observed long branches from perforant arteries.

Convolution is an indispensable operation for solving problems from a variety of subject areas: machine learning problems, data analysis, signal processing, image processing filters. However, due to the complexity of the algorithms that implement them, in practice, even three-dimensional convolutions are used much less often than one-and two-dimensional ones. The main reason for this lies in the absence of a single strict definition of the operation and the overload of the term “convolution” in mathematics. The multidimensional matrix algebra includes operations that are semantically similar to convolutions, and it is easily parallelized using natural generalizations of operations on flat matrices to the multidimensional case and has already proved its effectiveness in tensor algebra. Therefore, it is advisable to construct the definition of convolution through operations on the algebra of multidimensional matrices. The article considers an approach to improving the efficiency of convolution algorithms in software systems based on it, including convolutional neural networks. The author proposes a multidimensional matrix definition of the convolution operation. On its basis, a multidimensional matrix model of calculations is built, which will allow us to effectively formalize problems whose solution uses multidimensional convolution operations, as well as to implement an effective solution to these problems due to the natural parallelism inherent in the operations of the algebra of multidimensional matrices. As a result, a mathematical model of convolution operations based on the algebra of multidimensional matrices with the operation the (0, µ)-convolution product is obtained. In practice, in solving applied problems, the proposed mathematical model of convolution operations serves as the basis for developing libraries of programs that effectively implement these operations by parallelizing the operation the (0, µ)-convolution product.

Background: The advance in imaging techniques is useful for 3D models and printing leading to a real revolution in many surgical specialties, in particular, neurosurgery. Methods: We report on a clinical study on the use of 3D printed models to perform cranioplasty in patients with craniosynostosis. The participants were recruited from various medical institutions and were divided into two groups: Group A (n = 5) received traditional surgical education (including cadaveric specimens) but without using 3D printed models, while Group B (n = 5) received training using 3D printed models. Results: Group B surgeons had the opportunity to plan different techniques and to simulate the cranioplasty. Group B surgeons reported that models provided a realistic and controlled environment for practicing surgical techniques, allowed for repetitive practice, and helped in visualizing the anatomy and pathology of craniosynostosis. Conclusion: 3D printed models can provide a realistic and controlled environment for neurosurgeons to develop their surgical skills in a safe and efficient manner. The ability to practice on 3D printed models before performing the actual surgery on patients may potentially improve the surgeons’ confidence and competence in performing complex craniosynostosis surgeries.

Background: Simulation-based techniques using three-dimensional models are gaining popularity in neurosurgical training. Most pre-existing models are expensive, so we felt a need to develop a real-life model using 3D printing technology to train in endoscopic third ventriculostomy. Methods: The brain model was made using a 3D-printed resin mold from patient-specific MRI data. The mold was filled with silicone Ecoflex™ 00-10 and mixed with Silc Pig® pigment additives to replicate the color and consistency of brain tissue. The dura mater was made from quick-drying silicone paste admixed with gray dye. The blood vessels were made from a silicone 3D-printed mold based on magnetic resonance imaging. Liquid containing paprika oleoresin dye was used to simulate blood and was pumped through the vessels to simulate pulsatile motion. Results: Seven residents and eight senior neurosurgeons were recruited to test our model. The participants reported that the size and anatomy of the elements were very similar to real structures. The model was helpful for training neuroendoscopic 3D perception and navigation. Conclusions: We developed an endoscopic third ventriculostomy training model using 3D printing technology that provides anatomical precision and a realistic simulation. We hope our model can provide an indispensable tool for young neurosurgeons to gain operative experience without exposing patients to risk.