Search

The spatiotemporal interaction of large‐ and regional‐scale upper mantle forces can prevail in collisional settings. To better understand the role of these forces on post‐subduction tectonics, we focus on mantle dynamics in the East Anatolian Plateau, a well‐documented segment of the Arabian‐Eurasian continental collision zone. Specifically, we analyze multiple forces in the upper mantle, which have not been considered in previous studies in this region. To this end, we use a state‐of‐the‐art 3D instantaneous geodynamic model to quantify the dynamics of thermally defined upper mantle structures derived from seismic tomography data. Results reveal a prominent SW‐NE‐oriented mantle flow from the Arabian foreland to the Greater Caucasus–a plumelet–through a lithospheric channel under the East Anatolian Plateau. This plumelet induces localized dynamic topography (∼500 m) around the extensional Lake Van province, favoring NE‐directed compression and westward escape of the Anatolian plate. We suggest that the Lake Van region is an active magma‐rich intraplate rift in the Africa‐Arabia‐Anatolian plume‐rift system. The rift zone was probably initiated by Neotethyan subduction‐related forces and has been reactivated and/or sustained by the plumelet‐induced convective support. Our findings are consistent with numerous observations, including the recent low‐ultralow seismic velocities with a SW‐NE splitting anisotropy pattern, geochemical and petrological studies, and local kinematics showing upper mantle‐induced extensional tectonics in the collisional region. Plain Language Summary: Our goal is to better understand the active deformations of post‐subduction tectonics. To this end, we ran a 3D thermomechanical model of the East Anatolian Plateau, one of the most intriguing segments of the Arabian‐Eurasian continental collision zone. The model integrates seismically defined upper mantle structures and uses an open‐source code (ASPECT). Results reveal the significant role of large‐ and regional‐scale upper mantle forces in the study region. At long wavelengths, we find SW‐NE‐oriented mantle flow and associated dynamic topography. We interpret that such flow—a plumelet (regional upper‐mantle plume migration with neither a significant tail extending to the lower mantle nor a mushroom head reaching the hot spots on the surface)—is linked to the large‐scale mantle flow from the Arabian plate to the Greater Caucasus. At short wavelengths, we find localized dynamic topography and high stress and strain anomalies in the Lake Van zone. We argue that the plumelet, which became more forceful after the removal of the subducted Neotethyan slab, may have generated mantle tractions that contribute to magma‐rich‐intraplate rifting in the Lake Van region. Our results are in good agreement with local kinematics, low‐speed seismic velocities with SW‐NE anisotropy patterns, and geochemical‐petrological studies. Key Points: We present the 3D numerical model and observations related to the Africa‐Arabia‐Anatolian plume‐rift systemOur thermomechanical model provides new insight into the magma‐rich intraplate active rifting in collisional settingsIntegrated analyses from the 3D geodynamic model and observations reveal a SW‐NE‐oriented plumelet and its regional implications [ABSTRACT FROM AUTHOR]

The tectonic configuration of the Caribbean plate is defined by inward‐dipping double subduction at its boundaries with the North American and Cocos plates. This geometry resulted from a Paleogene plate reorganization, which involved the abandonment of an older subduction system, the Great Arc of the Caribbean (GAC), and conversion into a transform margin during Lesser Antilles (LA) arc formation. Previous models suggest that a collision between the GAC and the Bahamas platform along the North American passive margin caused this event. However, geological and geophysical constraints from the Greater Antilles do not show a large‐scale compressional episode that should correspond to such a collision. We propose an alternative model for the evolution of the region where lower mantle penetration of the Farallon slab promotes the onset of subduction at the LA. We integrate tectonic constraints with seismic tomography to analyze the timing and dynamics of the reorganization, showing that the onset of LA subduction corresponds to the timing of Farallon/Cocos slab penetration. With numerical subduction models, we explore whether slab penetration constitutes a dynamically feasible set of mechanisms to initiate subduction in the overriding plate. In our models, when the first slab (Farallon/Cocos) enters the lower mantle, compressive stresses increase at the eastern margin of the upper plate, and a second subduction zone (LA) is initiated. The resulting first‐order slab geometries, timings, and kinematics compare well with plate reconstructions. More generally, similar slab dynamics may provide a mechanism not only for the Caribbean reorganization but also for other tectonic episodes throughout the Americas. Plain Language Summary: The Caribbean tectonic plate is bounded by subduction to the east and west. However, it is unclear how this plate configuration was achieved. Previous models suggest that the North American continental margin entered an ancient Caribbean subduction zone between 66 and 34 Mya, converting the margin to strike‐slip and initiating subduction to the east at the Lesser Antilles. However, the deformation expected for this event is absent at the site of the supposed collision. Considering geological and geophysical constraints across the Caribbean, we instead suggest that mantle processes drove the reorganization. Combining tomographic images of the mantle with plate modeling, we reconstruct subduction below the Caribbean. Then, through numerical mantle convection modeling, we simulate the Caribbean subduction setting at the time of the reorganization. Our results show that when a subducting plate enters the lower, higher viscosity part of the mantle, it affects mantle flow, causing compression in the overriding plate and the potential initiation of a second subduction zone. The timing when the first slab enters the lower mantle and subduction initiates aligns well with our reconstructions and geological constraints in the Caribbean. We hypothesize that a similar process may explain other major deformation episodes throughout the Americas. Key Points: Tectonic constraints conflict with previously proposed collision and escape models for Paleogene Caribbean reorganizationSlab reconstructions and geodynamic models suggest Farallon slab anchoring induced tectonic reorganizationIn this model, lower mantle slab penetration triggers mantle flow, lithospheric compression, and subduction initiation [ABSTRACT FROM AUTHOR]

Geochemistry, Geophysics, Geosystems (G‐Cubed) is a respected Earth science journal that publishes research papers, methods, and coding applications. In 2023, the journal received 485 manuscripts and published 244 of them. The journal credits its success to the voluntary contributions of over 764 reviewers who provided more than 937 reviews. The journal expresses gratitude to the reviewers for their time and expertise, as their efforts ensure that the published papers meet the high standards expected by the research community. The journal welcomes feedback on its peer review process and anticipates exciting advancements in the field. Additionally, the document is a list of names of individuals who have contributed to a report or study, organized alphabetically. The purpose of the document is to acknowledge the participation of these individuals, who come from diverse fields, in the research or study. [Extracted from the article]

Transpressional margins are widespread, and their dynamics are relevant for plate boundary evolution globally. Though transpressional orogen evolution involves a topographic response to deformation, many studies focus only on the structural development of the system ignoring surface processes. Here, we present a new set of analog models constructed to investigate how tectonic and surface processes interact at transpressive plate boundaries and shape topography. Experiments are conducted by deforming a previously benchmarked crustal analog material in a meter‐scale plexiglass box while controlling erosion through misting nozzles mounted along the transpressional wedge. To analyze the experiments, we generate digital elevation models from laser scans and conduct image correlation analysis on photos taken during experiments. We focus on three experiments that cover a range of erosional conditions and shortening stages (two end‐member erosion models and a dry reference). In all experiments, a bivergent wedge forms, and strain partitioning broadly evolves according to previously established models. Regarding drainage networks, we find that the streams in our models develop differently through feedback between fault development and drainage rearrangement processes. Differences between end‐member erosional models can be explained by the varying response of streams to structure modulated by rainfall. Additionally, erosion may influence the structural evolution of transpressional topography, leading to accelerated strike‐slip partitioning. From these results, we create a model for developing structures, streams, and topography where incision and valley formation along main structures localize exhumation. We apply insights from the models to natural transpressional systems, including the Transverse Ranges, CA, and the Venezuelan Andes. Key Points: Feedback between fault and drainage network development regulates the deformation, exhumation, and morphology of transpressional systemsIncreased erosion accelerates the progression from distributed deformation to complete strike‐slip strain partitioningDue to heightened rock uplift and incision, the maximum exhumation in a transpressional wedge is along the master fault and axial valley [ABSTRACT FROM AUTHOR]

Orogenic plateaus of continental collision zones exhibit landforms and fluvial networks that retain first‐order information on their topographic evolution and vertical growth. The inversion of river longitudinal profiles allows to reconstruct the base level fall history of plateaus, supporting the study of landscape evolution in the frame of geodynamic models. The Eastern Anatolian Plateau (EAP) of the Arabia‐Eurasia collision zone is a plateau at an early stage of development. It stands at ∼2,000 m, presents endorheic basins, and is drained by three main river networks. Seismic data indicate a thinned lithospheric mantle that explains the late Cenozoic volcanic activity. Despite the number of studies on the EAP uplift, its history is still debated. In this study we investigated the EAP hydrography and topography, and we inverted the longitudinal profile of one of the main rivers: the Arax River. The results describe a high‐standing, low‐relief plateau drained by a hydrography, controlled by active tectonics. Longitudinal profiles and χ‐plots illustrate rivers in disequilibrium with channel steepness increasing downstream. The elevation of marine deposits indicates a surface uplift of ∼2,000 m, ∼500 m of which are of residual topography. This upheaval occurred by two increases: the first one at 10–11 Ma with the opening of a slab window and the arrival of a mantle flow from Arabia and the second one at ∼5 Ma with the continued inflow coupled with isostasy. Our results describe the early stage of collisional plateau development, distinguishing the contribution of deep processes and isostasy to the topographic growth. Key Points: The Eastern Anatolian Plateau (EAP) is a continent‐continent collisional plateau at an early stage of developmentThe EAP was affected by a surface uplift of ∼2,000 m according to geologic and geomorphic data; ∼500 m of it are dynamically supportedThe base level fall history of EAP documents a three steps increase in uplift rate due to the contribution of deep and crustal processes [ABSTRACT FROM AUTHOR]

Abstract: Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle [...]

Abstract: Since the Mesozoic, Africa has been under extension with shorter periods of compression associated with obduction of ophiolites on its northern margin. Less frequent than 'normal' subduction, obduction is [...]

Understanding the causes of intraplate earthquakes is challenging, as it requires extending plate tectonic theory to the dynamics of continental deformation. Seismicity in the western United States away from the plate boundary is clustered along a meandering, north-south trending 'intermountain' belt (1). This zone coincides with a transition from thin, actively deforming to thicker, less tectonically active crust and lithosphere. Although such structural gradients have been invoked to explain seismicity localization (2,3), the underlying cause of seismicity remains unclear. Here we show results from improved mantle flow models that reveal a relationship between seismicity and the rate change of 'dynamic topography' (that is, vertical normal stress from mantle flow). The associated predictive skill is greater than that of any of the other forcings we examined. We suggest that active mantle flow is a major contributor to seismogenic intraplate deformation, while gravitational potential energy variations have a minor role. Seismicity localization should occur where convective changes in vertical normal stress are modulated by lithospheric strength heterogeneities. Our results on deformation processes appear consistent with findings from other mobile belts (4), and imply that mantle flow plays a significant and quantifiable part in shaping topography, tectonics, and seismic hazard within intraplate settings., Interplate earthquakes are well described by plate tectonics as a consequence of horizontal motion gradients within the surface boundary layer of thermo-chemical mantle convection. For seismicity away from plate boundaries, [...]

The interplay between tectonics and surface processes defines the evolution of mountain belts. However, correlating these processes through the evolution of natural orogens represents a scientific challenge. Analog models can be used for analyzing and interpreting the effect of such interaction. To fulfill this purpose it is necessary to understand how the imposed boundary conditions affect analog models' evolution in time and space. We use nine analog models characterized by different combinations of imposed regional slope and rainfall rates to investigate how surface processes respond to the presence of tectonically built topography (imposed slope) under different climatic conditions (rainfall rate). We show how the combination of these parameters controls the development of drainage networks and erosional processes. We quantify the morphological differences between experimental landscapes in terms of a proposed Se/R ratio, accounting for both observables and boundary conditions. We find few differences between analog models and natural prototypes in terms of parametrization of the detachment-limited stream power law. We observe a threshold in the development of channelization, modulated by a tradeoff between applied boundary conditions. [ABSTRACT FROM AUTHOR]

Key Points: The editors thank the 2022 peer reviewers [ABSTRACT FROM AUTHOR]

The interplay between tectonics and surface processes defines the evolution of mountain belts. However, correlating these processes through the evolution of natural orogens represents a scientific challenge. Analogue models can be used for analyzing and interpreting the effect of such interaction. We use nine analog models characterized by different combinations of imposed regional slope and rainfall rates to investigate how a small scale orogen evolves in response to tectonics and surface processes. We show how the combination of these parameters control the development of drainage networks and erosional processes. We quantify the different morphological expression of analogue landscapes in terms of a proposed Ae number that accounts for both observables and boundary conditions. We find few differences between analogue models and natural prototypes, in terms of parametrization of the detachment-limited stream power law. We observe a threshold in the development of channelization, modulated by a tradeoff between applied boundary conditions. [ABSTRACT FROM AUTHOR]

Apatite fission track (AFT) and (U-Th)/He (AHe) thermochronometry are applied to constraint the thermal history of the basement rock forming the Peloritani Mountains in northeast Sicily, Italy. AFT ages range between 29.0 [+ or -] 5.5 Ma and 5.5 [+ or -] 0.9 Ma while AHe ages vary from 19.4 Ma to 3.3 Ma. Most AFT ages are younger than the overlying terrigenous sequence that, in turn, postdates the main orogenic phase. Through the coupling of the thermal modeling with the stratigraphic record, a middle Miocene thermal event is revealed. This event affected an inner-intermediate portion of the Peloritani Mountains and is confined by the distribution of the AFT ages < 15 Ma. The U-shaped pattern of AFT ages along N-S transects across the mountain chain is consistent with burial below a thrust stack that is a few km thick, created by an out-of-sequence thrusting phase that affected the inner portion of the belt. The tectonic load was then removed initially by erosion enhanced by the high relief at 10-7 Ma. The difference between young AFT and AHe ages is used to infer a rate of exhumation of 0.3 mm/yr for this stage. The gap between the youngest AHe ages and the sedimentary record above indicate a final exhumation stage with increasing rates of denudation (1-3 mm/yr) since the Pliocene times due to extensional tectonics. doi: 10.1029/2009TC002659.

The opening of the Tyrrhenian Sea has been punctuated by short-lived episodes of oceanic accretion on separate small backarc basins during early Pliocene (Vavilov basin) and early Pleistocene (Marsili basin) time. These spreading pulses are related to slab rollback and are synchronous with the reduction of the subduction zone width during the formation of the narrow Calabrian arc. Using laboratory models, we investigated the long-term and transient effects of the reduction of slab width on the subduction kinematics. We found that the abrupt reduction in slab width results in a pulse of acceleration of the trench retreat velocity, as the balance between driving and resisting forces acting on the slab is temporarily modified. Our findings also show that the time scale and amplitude of spreading observed in the Tyrrhenian Sea can be experimentally fitted if the scaled viscosity of the uppermost part of the mantle ranges between [10.sup.19] and [10.sup.20] Pa s. doi: 10.1130/G31038.1