Search

Demarcating the continental–oceanic boundary (COB) is extremely important as it contributes to an understanding of the tectonic environments of marginal basins through plate reconstructions. In general, the COB is estimated by jointly interpreting the features of the basement geomorphology, bathymetry and geophysical datasets, including gravity, magnetic, seismic and geochemical data. We propose a novel methodology named the tilt-theta angles correlation (TTAC), a second-order filtering approach to estimate the COB using high-resolution satellite gravity data. This method computes the angular difference or correlation angle between the vectors computed from the gradients of the tilt and theta derivative-based first-order filters. Oceanic regions generally exhibit small correlation angles (∼0°), thereby indicating a direct correlation; in contrast, continental regions depict large correlation angles (∼180°) and thus display an inverse correlation. The TTAC method marks the COB at the spatial position where the correlation angles abruptly shift from inverse to direct. Tests using synthetic data and the larger spectral energy content of TTAC for long wavelengths over tilt, theta and minus of the sign of vertical derivative (-SiVD) filters attest the effectiveness of the new methodology over first-order derivative based filters. Additionally, tests utilizing real data over both the West African Transform Margin (WATM) and across the South Atlantic Conjugate Margin (SACM) provide favourable results compared with the previous methodologies used to demarcate the COB. The COB estimates derived using the new methodology are consistent with the COB estimates obtained during recent plate-reconstruction studies. We also compare our results with an earlier interpretation along a conjugate margin encompassing magma-poor and magma-rich regions. In the complex rifted environments of the SACM, in which volcanic rocks are dominant, the TTAC methodology substantially improves the previous COB estimates, thereby establishing it as an efficient edge marker by simultaneously reducing small-scale geological noise and enhancing regional-scale geological contributions. [ABSTRACT FROM AUTHOR]

ABSTRACT Marine magnetotelluric measurements using 'free-fall'' instruments without effective compasses suffer from the problem of unknown orientation of the receivers at the seafloor. While past works indicate that marine magnetotelluric orientation of the instruments can be estimated by reference to land deployments of known orientation using the transfer tensor method, there is limited published information on how this is implemented in practice. We document this method and propose a set of new time- and frequency-domain approaches to solve this orientation problem of the seafloor receivers. We test these methodologies in onshore and offshore magnetotelluric data whose orientations are well known and apply these techniques to marine magnetotelluric data with unknown orientation. For the controlled tests, both time- and frequency-domain approaches produce overall comparable results. To investigate the effects of the subsurface structure distribution on the orientation process, a dimensionality analysis of a controlled dataset is carried out. In subsequent analysis using the available disoriented marine magnetotelluric data from offshore Brazil and from the Vassouras magnetic observatory on the mainland for remote referencing, frequency-domain methods yield approximate orientation angles among themselves with low standard deviation each. Time-domain results are consistent for most cases but differ from frequency-domain results for some situations. [ABSTRACT FROM AUTHOR]

The commonest technique for determination of the continental-oceanic crustal boundary or transition (COB) zone is based on locating and visually correlating bathymetric and potential field anomalies and constructing crustal models constrained by seismic data. In this paper, we present a simple method for spatial correlation of bathymetric and potential field geophysical anomalies. Angular differences between gradient directions are used to determine different types of correlation between gravity and bathymetric or magnetic data. It is found that the relationship between bathymetry and gravity anomalies can be correctly identified using this method. It is demonstrated, by comparison with previously published models for the southwest African margin, that this method enables the demarcation of the zone of transition from oceanic to continental crust assuming that this it is associated with geophysical anomalies, which can be correlated using gradient directions rather than magnitudes. We also applied this method, supported by 2-D gravity modelling, to the more complex Liberia and Cote d'Ivoire-Ghana sectors of the West African transform margin and obtained results that are in remarkable agreement with past predictions of the COB in that region. We suggest the use of this method for a first-pass interpretation as a prelude to rigorous modelling of the COB in frontier areas. [ABSTRACT FROM AUTHOR]

ABSTRACT The magnetotelluric (MT) method has been applied to the determination of the deep resistivity structure of the northeastern margin of the Parnaiba Basin. Transient electromagnetic (TEM) and MT data were collected in early 1999 along a 95 km long N–S line, extending from the coast across the projected subcrop position of a discontinuous fault found to the west of the study area that is believed to be a possible basin-bounding fault. The MT data were processed to yield the TE- and TM-mode responses and then corrected for static shift using central-loop and single-loop TEM data, respectively. Regularized 2D MT inversion was subsequently undertaken using a structured initial model with the near-surface constrained by TEM inversion results. As a consistency check, we performed another set of 2D inversions using different smooth initial models. The various optimal 2D inversion models show clearly the presence of a major basement trough, over 2 km deep, located about 70 km from the coast. We interpret it as possibly marking the main basin margin and suggest that it may have implications for groundwater resource development in the area. [ABSTRACT FROM AUTHOR]

In this work, the Iguatu basin in Northeastern Brazil was imaged by 49 broadband (~0.01–1,000s) magnetotelluric (MT) and transient electromagnetic (TEM) soundings displaced on a 3D arrangement effected by a NE-SW along-basin major axis profile and three NW-SE transversally oriented profiles. The Iguatu basin is an intracratonic sedimentary basin, with genesis related to the opening of the South Atlantic Ocean (160-115 Ma). The basin was implanted over Precambrian basement of the Borborema Province. The sedimentary rocks deposited from Early Cretaceous to Quaternary include medium to coarse sandstones with conglomerate levels at the bottom, siltstones, mudstones, followed by Tertiary similar sedimentary rocks and Quaternary unconsolidated alluvium coverings. The MT responses (impedance and tipper) were robustly estimated and static-shift corrected using transient electromagnetic (TEM) measurements. Both rotational invariant and phase tensor dimensionality analyses revealed a complex subsurface structure, characterized by 2D/1D structures for short period data (<1 s), associated to sedimentary rocks within the basin, and a 3D behavior for longer periods, related to crustal depths. Three-dimensional inversion of full impedance was performed yielding a preferred 3D resistivity model with nRMS error of 1.99, which recovered important geoelectrical structures within the basin and crust. Two remarkably low resistivity anomalies (<1 Ω m) were observed in the crust of the Borborema Province, a feature also observed other MT studies elsewhere in the province. They can be ascribed to either the Mesozoic reactivation of the Aiuaba-Orós-Jaguaribe shear zone or the percolation of aqueous fluids between the zones of weakness presented in the fractured basement beneath the Iguatu basin; or even be a combination of both mechanisms. The resistivity model varies appreciably within the basin alternating low resistivity (<1 Ω m) graben-like and resistive (>300 Ω m) horst-like features, reflecting a structurally complex rift tectonic system of this ~800 m deep pull apart basin. A good correlation between resistivity values and shallow unconfined aquifers were spotted. • 3D MT model of Iguatu basin in NE Brazil revealed prominent resistivity variations for basin and upper crust structure. • Highly conductive anomalies beneath Iguatu Basin can be associated to shear zones Mesozoic reactivation or fluids percolation. • Good correlation between conductivity well log values and the MT imaging suggest areas of potable water. [ABSTRACT FROM AUTHOR]

We present a resistivity model for the boundary of the Paleozoic Parnaíba Basin and the Cretaceous Sanfranciscana Basin (NE Brazil). The boundary underlies the Neoproterozoic Rio Preto belt, whose basement consists of reworked Archean and Paleoproterozoic rocks. In order to characterize the subsurface geoelectrically, 17 broadband magnetotelluric (MT) soundings were acquired and distributed along a ∼90 km profile across Rio Preto belt. The transfer functions were obtained with a robust code, thus obtaining reliable results for all four components of the impedance tensor. Some apparent resistivity and phase curves were shown to be heavily contaminated by local electromagnetic noise at low frequencies, and others showed minimal radio signals associated with the deadband frequency range. In this study, the MT data set was interpreted using 2D and 3D inversion procedures. Comparing the two MT models, the crustal-scale structure is well resolved in the 2D model, but the 3D model explains significantly better the measured data related to deep/shallow structures and proved to be more sensitive to conductive anomalies. The final resistivity image derived from the 3D inversion denotes a resistive basement with vertical conductive anomalies in the SE portion and a conductive domain in the NW portion. The homogeneous conductive block corresponds to the Archean domain of the Rio Preto belt, and the heterogeneous resistive block has the morphology and physical properties of the Paleoproterozoic block. Lateral geological correlation and gravity data support that the basement of the Parnaíba Basin in the study area is formed by the Archean block of the Rio Preto Belt. The boundary between the resistive blocks is a reverse fault that is also the tectonic front of a sub-horizontal detachment fault. In the Paleoproterozoic block, the conductors are associated with graphitic and volcano-sedimentary sequences, the dome and keel structures explain the geometry of the conductors. Additionally, graben-likes features were revealed in this block, interpreted as Cambrian basins filled by Cretaceous sediments of the Urucuia and Areado formations. These structures have a good correlation with those defined in the eastern edge of the Parnaíba Basin in previous studies. Towards the NW end of the section, the resistive blocks abruptly turn into a high conductivity domain (HCD) covered by a shallow conductive layer of Parnaíba Basin sandstones that modifies the electrical properties of the basement by interaction of basal fluids. • A crust resistivity model for the boundary of the Parnaíba Basin and the Sanfranciscana Basin from magnetotelluric inversion. • The resistivity image denotes a conductivity and a resistivity domain. • A Bouguer anomaly constraint that the conductivity domain corresponds to the Archean Basin, beneath the Parnaíba Basin. • A series of conductors located into the resistivity domain interpreted as metavolcano sedimentary sequences. • Grabenform structures were performed and interpreted as Cambrian Basins. [ABSTRACT FROM AUTHOR]