9 results on '"Gao, Liuqing"'
Search Results
2. Surface-Acoustic-Wave Devices Based on Lithium Niobate and Amorphous Silicon Thin Films on a Silicon Substrate.
- Author
-
Yang, Yansong, Gao, Liuqing, and Gong, Songbin
- Subjects
- *
SILICON films , *THIN films , *LITHIUM niobate , *AMORPHOUS silicon , *SOUND waves , *ACOUSTIC impedance - Abstract
This work presents an acoustic platform using solidly mounted thin-oriented lithium niobate (LiNbO3) film on silicon (Si). A thin layer of amorphous Si eliminates a conductive layer generated in the thin-film bonding processes and contributes to acoustic energy confinement and thermal frequency stability. The gigahertz operating frequency is achieved by resorting to the guided acoustic wave shear-horizontal wave (SH0) in a 400-nm-thick X-cut LiNbO3 thin film. Due to the elimination of the parasitic surface conduction (PSC) effect, the electromechanical coupling of the guide acoustic wave is maximized in the Si-based heterogeneous wafer. Due to the minimized acoustic impedance mismatch between surface material and substrate, longitudinal and higher order spurious modes are suppressed. Due to the stiff substrate with a small temperature expansion coefficient (TEC), the solidly mounted structure features a reduced temperature coefficient of frequency (TCF) and improved power handling. The fabricated resonator shows an extracted electromechanical coupling coefficient of 22.8%, a high loaded $Q$ of 1208 at 1.6 GHz, and a TCF of −36 p/min/K. The compressed filter is demonstrated with a minimum insertion loss (IL) of 0.6 dB, a fractional bandwidth (FBW) of 8%, an out-of-band rejection of 30 dB, a TCF of −38.5 p/min/K at roll-off, and a miniaturized footprint of 0.4 mm2. The performance has shown the strong potential of the LiNbO3–Si platform for front-end applications in 5G. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
3. Investigating Substrate Loss in MEMS Acoustic Resonators and On-Chip Inductors.
- Author
-
Gao, Liuqing, Yang, Yansong, and Gong, Songbin
- Subjects
- *
ACOUSTIC resonators , *PLASMA-enhanced chemical vapor deposition , *DIELECTRIC thin films , *LITHIUM niobate , *COPLANAR waveguides , *SILICON films - Abstract
This work studies the influence of substrate loss on the performance of acoustic resonators and on-chip inductors and investigates the effective substrate resistivity of seven commonly used substrates in silicon-based devices. The substrates include X-cut lithium niobate (LiNbO3) film with two different thicknesses (400 nm and 1.6 $\mu \text{m}$) on high-resistivity Si (HR-Si) and amorphous Si wafers, SiO2 film with two different thicknesses on HR-Si, and bare HR-Si. The effective resistivities of these substrates are extracted using coplanar waveguides (CPWs) over a frequency range from 1 to 40 GHz. Using the effective resistivity approach, the efficiency of two substrate loss reduction techniques—Si wafer removal and amorphous Si—in reducing substrate loss is quantified. Comparison of the extracted substrate resistivities of the suspended and un-suspended dielectric-on-Si structures and comparison of LiNbO3 on HR-Si and amorphous Si are carried out. Substrate loss reduction techniques are more advantageous for a thinner dielectric film and at a lower frequency range due to the higher filling factor of the electric field in the Si wafer. Finally, by comparison of the effective substrate resistivity of SiO2 film on an HR-Si with bare HR-Si, thick plasma-enhanced chemical vapor deposition (PECVD) SiO2 film is found to be a good insulation layer to reduce substrate loss. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
4. Lateral Spurious Mode Suppression in Lithium Niobate A1 Resonators.
- Author
-
Yang, Yansong, Gao, Liuqing, Lu, Ruochen, and Gong, Songbin
- Subjects
- *
LITHIUM niobate , *LAMB waves , *RESONATORS , *QUALITY factor , *LITHIUM cell electrodes , *ELECTRICAL load , *MEMS resonators - Abstract
This work presents an improved design that exploits dispersion matching to suppress the spurious modes in the lithium niobate first-order antisymmetric (A1) Lamb wave mode resonators. The dispersion matching in this work is achieved by micro-machining the lithium niobate thin film to balance the electrical and mechanical loadings of electrodes. In this article, the dispersion matchings of the A1 mode in lithium niobate based on different metals are analytically modeled and validated with finite-element analysis. The fabricated devices exhibit spurious-free responses with a quality factor of 692 and an electromechanical coupling coefficient of 28%. The demonstrated method herein could overcome a significant hurdle that is currently impeding the commercialization of A1 devices. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
5. Wideband Hybrid Monolithic Lithium Niobate Acoustic Filter in the K-Band.
- Author
-
Gao, Liuqing, Yang, Yansong, and Gong, Songbin
- Subjects
- *
ACOUSTIC filters , *LAMB waves , *LITHIUM niobate , *FINITE element method , *RESONATOR filters , *PIEZOELECTRIC devices - Abstract
This article presents the design approach and the first demonstration of a wideband hybrid monolithic acoustic filter in the K-band, which exceeds the limitation of electromechanical coupling on the fractional bandwidth (FBW) of acoustic filters. The hybrid filter utilizes the codesign of electromagnetic (EM) and acoustic to attain wide bandwidth while keeping the advantages of small sizes and high Q in the acoustic domain. The performance trade space and design flow of the hybrid filter are also presented in this article, which allows this technology to be applied for filters with different center frequencies and FBWs. The hybrid filter is simulated by hybridizing the EM and acoustic finite element analysis, which are carried out separately and combined at a system level. The fabricated filter built with resonators having an electromechanical coupling of 0.7% based on the seventh-order antisymmetric Lamb wave mode (A7) has a 3-dB FBW of 2.4% at 19 GHz and a compact footprint of 1.4 mm2. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
6. X-Band Miniature Filters Using Lithium Niobate Acoustic Resonators and Bandwidth Widening Technique.
- Author
-
Yang, Yansong, Gao, Liuqing, and Gong, Songbin
- Subjects
- *
LITHIUM niobate , *ACOUSTIC resonators , *LAMB waves , *INTERDIGITAL transducers , *BUS lines , *TRANSMISSION zeros , *TRANSDUCERS , *MEMS resonators - Abstract
This work presents a class of micro-electro-mechanical system (MEMS)-driven radio frequency filters in the X-band. The X-band center frequencies are achieved by resorting to the third-order antisymmetric Lamb wave mode (A3) in a 650-nm-thick Z-cut lithium niobate thin film. A novel bandwidth (BW) widening technique based on using the self-inductance of the top interdigital transducers and bus lines is proposed to overcome the limitations set by the electromechanical coupling (${k} _{t}^{2}$) and satisfy the demands in miniaturization and wide BW. Four different designs of the filters are designed and fabricated to show the trade-off among BW, insertions loss (IL), out-of-band rejections, and footprint. Due to the spurious-free and high- ${Q}$ performance of the A3 lithium niobate resonators, the fabricated A3 lithium niobate filters have demonstrated small in-band ripples and sharp roll-offs. One of these fabricated has demonstrated a 3-dB BW of 190 MHz, an IL of 1.5 dB, and a compact footprint of 0.56 mm2. Another design is fabricated to demonstrate a 3-dB BW of 170 MHz, an IL of 2.5 dB, an out-of-band rejection of 28 dB, and a compact footprint of 1 mm2. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
7. 10–60-GHz Electromechanical Resonators Using Thin-Film Lithium Niobate.
- Author
-
Yang, Yansong, Lu, Ruochen, Gao, Liuqing, and Gong, Songbin
- Subjects
MEMS resonators ,ELECTROMECHANICAL devices ,RESONATORS ,LAMB waves ,MICROELECTROMECHANICAL systems ,WIRELESS communications ,LITHIUM niobate ,LEAD zirconate titanate - Abstract
This work presents a new class of microelectromechanical system (MEMS) resonator toward 60 GHz for the fifth-generation (5G) wireless communications. The wide range of the operating frequencies is achieved by resorting to different orders of the antisymmetric Lamb wave modes in a 400-nm-thick Z-cut lithium niobate thin film. The resonance of 55 GHz demonstrated in this work marks the highest operating frequency for piezoelectric electromechanical devices. The fabricated device shows an extracted mechanical $Q$ of 340 and an $f\times Q$ product of $1.87\times 10^{13}$ in a footprint of $2 \times 10^{-3}$ mm2. The performance has shown the strong potential of LiNbO3 antisymmetric mode devices for front-end applications in 5G high-band. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
8. A Radio Frequency Nonreciprocal Network Based on Switched Acoustic Delay Lines.
- Author
-
Lu, Ruochen, Manzaneque, Tomas, Yang, Yansong, Gao, Liuqing, Gao, Anming, and Gong, Songbin
- Subjects
ACOUSTIC delay lines ,CIRCULATORS (Electrical engineering) ,DESIGN ,INSERTION loss (Telecommunication) ,LITHIUM niobate - Abstract
This paper demonstrates the first nonreciprocal network based on switched low-loss acoustic delay lines. The four-port circulator is built upon a recently reported frequency-independent, programmable, nonreciprocal framework based on switched delay lines. The design space for such a system, including the origins of the insertion loss (IL) and harmonic responses, is theoretically investigated, illustrating that the key to better performance and low-cost modulation signal synthesis lies in a large delay. To implement a large delay, we resort to in-house fabricated low-loss, wideband lithium niobate (LiNbO3)SH0 mode acoustic delay lines employing single-phase unidirectional transducers. The four-port circulator, consisting of two switch modules and one delay line module, has been modularly designed, assembled, and tested. The design process employs time-domain full circuit simulation, and the results match well with measurements. An 18.8-dB nonreciprocal contrast between IL (6.6 dB) and isolation (25.4 dB) has been achieved over a fractional bandwidth of 8.8% at a center frequency 155 MHz, using a record low switching frequency of 877.19 kHz. The circulator also shows 25.9-dB suppression for the intramodulated tone and 30 dBm for IIP3. Upon further development, such a system can potentially lead to future wideband, low-loss chip-scale nonreciprocal radio frequency systems with unprecedented programmability. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
9. 4.5 GHz Lithium Niobate MEMS Filters With 10% Fractional Bandwidth for 5G Front-Ends.
- Author
-
Yang, Yansong, Lu, Ruochen, Gao, Liuqing, and Gong, Songbin
- Subjects
SUBSTRATE integrated waveguides ,LITHIUM niobate ,FILTERS & filtration ,BANDWIDTHS - Abstract
This paper presents a new class of micro-electro-mechanical system (MEMS) C-band filters for 5G front-ends. The filter is comprised of resonators based on the first-order asymmetric Lamb wave (A1) mode in thin-film lithium niobate. Two filters have been demonstrated at 4.5 GHz with sharp roll-off, flat in-band group delay, and spurious-free response over a wide frequency range. The first design shows a 3-dB fractional bandwidth (FBW) of 10%, an insertion loss (IL) of 1.7 dB, an out-of-band (OoB) rejection of −13 dB, and a compact footprint of 0.36 mm2, while the second design shows a 3-dB FBW of 8.5%, an IL of 2.7 dB, an OoB rejection of −25 dB, and a footprint of 0.9 mm2. The demonstrations herein mark the largest FBW achieved for acoustic-only filters at 5G frequencies. [2019-0083] [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.