Search

This research presents a new drillability value (SJ*) that corrects the most-used Sievers' J-value (SJ) by removing the accommodation effect of the drill bit in the first tenths of a millimetre to better represent the real drillability of limestones. Moreover, this research demonstrates how such an effect is more notable when porosity and micro-cracking increase, which in this study has been achieved by inducing thermal damage in the samples. To do so, limestone samples from the Prada formation were subjected to temperatures of 105, 300 and 600 °C and then cooled at fast and slow rates to induce porosity and micro-cracking. Two characteristic zones were identified in the penetration–time plots: (a) a shallow region (Zone 1) with a variable drilling rate including an initial peak and (b) a deeper region (Zone 2) where the drilling rate stabilises. These drilling rates increase with thermally induced porosity and micro-cracking, and the authors propose a new method to delimit Zones 1 and 2. Zone 1 is attributed to the time it takes for the drill bit to adjust and settle in the rock surface, while Zone 2 more realistically represents the drillability of the material. The above influences the SJ value derived from Sievers' J-miniature drill tests, so a new drillability value SJ* is proposed that corrects SJ by excluding Zone 1 and giving more weight to Zone 2. The novel SJ* presented in this research constitutes a more accurate tool to assess and predict the drilling performance in limestones. [ABSTRACT FROM AUTHOR]

This paper describes an in-depth soil characterization study in the La Carolina financial district of Quito (Ecuador). As there was very little information available on the geotechnical structure of Quito's volcanic soil, particularly in this area, where large-scale property development has taken place, the aim was to provide information on soil parameters to engineers working on large geotechnical and civil engineering projects based on the results of a thorough and comprehensive study of such properties. A series of field tests were performed at three different sites, where thin-walled tube samples were collected for lab testing to estimate the index properties and mechanical parameters. These index properties were then combined with conventional two-way drainage oedometer tests and stress-path triaxial testing to evaluate compressibility, stiffness and strength. The subsoil was found to be partly composed of slightly overconsolidated volcanic soils. X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses were also conducted to determine mineralogical and microstructural features and evaluate their influence on the mechanical behavior of the volcanic soil. This type of research is frequently applied to the study of landslides in urban environments, where it is essential to understand their failure mechanisms, especially in slopes generated by the construction of important engineering works. Therefore, based on this geotechnical characterization study, parameters were subsequently determined for the Mohr–Coulomb (MC), Hardening Soil (HS), and Hardening Soil with Small-Strain Stiffness (HSsmall) soil constitutive models, and these were applied to a numerical study of the Soil Nailing system behavior for the construction of a five-level underground car parking structure of an important building located in the north-central sector of the city of Quito. It was verified that the HSsmall and HS constitutive soil models better reproduce the behavior of this type of structure. Finally, the multiple geotechnical parameters determined in this study significantly contribute to the analysis of these structures in this soil type. [ABSTRACT FROM AUTHOR]

This work evaluates the effect of high temperatures and cooling methods on the drillability of Prada limestone. Samples from boreholes drilled during the design stage of the Tres Ponts Tunnel in the Catalan south Pyrenean zone (Spain) were subjected to temperatures of 105, 200, 300, 400, and 600 °C, and then cooled at a slow rate or by quenching. Sievers' J-value (SJ) and brittleness (S20) were determined on thermally treated samples, and the drilling rate index (DRI) was calculated for each temperature. The results show that thermal treatment implied a sustained increase in the drillability of the rock of up to 40% at 600 °C and a change in the drillability category (from medium to high). At 600 °C, SJ and S20 tripled and doubled, respectively, the initial values obtained for the intact rock. The results were inconclusive about the influence of the cooling method on the drilling performance of Prada limestone for the tested range of temperatures. The substantial improvement observed in the drillability of Prada limestone when heated, measured in terms of DRI, could help in the development of novel thermally-assisted mechanical excavation methods. Additionally, strong correlations between drillability variables (i.e., SJ and S20) and physical and mechanical variables of Prada limestone (i.e., P- and S-wave velocities, uniaxial compression strength, elastic modulus, and Poisson's ratio) are proposed. Correlations will help make preliminary predictions of drillability based on properties such as uniaxial compression strength and ultrasound wave velocities. [ABSTRACT FROM AUTHOR]

During construction of road and railway projects, expansive soils may be encountered. Their use as construction material for embankments presents difficulties, due to their tendency to swell or shrink. Traditional solutions include mixing soil with cement or quicklime, or to import materials from other locations. As an alternative to these solutions, the present paper proposes a less expensive and more sustainable solution, consisting in mixing the natural expansive soil with rubber particles obtained from scrap tyres. Especially, the “Facies Tap” (a typical soil of southeastern Spain) is studied in this paper. This soil, which is mainly a white argillaceous marlstone, is mixed with six different amounts of rubber content (2.5, 5, 10, 15, 20 and 25% in terms of weight) and submitted to several geotechnical tests, including compaction, free swelling, unidimensional consolidation, direct shear testing and undrained shear compression. The addition of rubber particles to the soil up to a 15% makes it lighter and less prone to swelling, while compressibility remains similar to the natural soil and the drained shear strength slightly increases. Based on experimental results, the optimum rubber content mixed with the soil to prevent its swelling is established at around 3%. [ABSTRACT FROM AUTHOR]

• Prada limestone shows a steep drop in UCS even at low temperatures (T < 200 °C). • Important properties variation at 300 and 400 °C due to micro-fissure progression. • Severe thermal damage at 500 °C due to trans -granular micro-fissure connection. • Dramatic properties variation at 600 °C, even greater in water-cooled samples. • Best predictions of mechanical parameters using exponential and potential functions. Temperature and cooling methods strongly affect the stability of tunnels drilled in rock masses and so condition interventions for fire emergencies. Samples from two horizontal boreholes drilled in Prada limestone during the design stage of the Tres Ponts Tunnel in the Catalan south Pyrenean zone (Spain) are heated from 105 to 600 °C, and subsequently cooled with air or water to simulate fire extinguishing interventions. Changes in chemical composition and microstructure, physical properties (open porosity, volume, dry total weight, P and S-wave velocity), and mechanical properties (uniaxial compressive strength, elastic modulus, and Poisson's ratio) are analysed. Rock weakening is observed even at low temperatures (T < 300 °C). The influence of the cooling method appeared at intermediate temperatures of 300-400 °C and open porosity, P and S-wave velocities, and elastic modulus show greater variation for water-cooled samples. A temperature of 500 °C is of paramount importance for 'Prada' limestone as it leads to a dramatic increase in porosity and a notable decrease in P and S-wave velocities under both cooling methods. Trans-granular micro-crack progression is observed at 500 °C using scanning electron microscope (SEM), and water-cooled samples show a greater loss in uniaxial compressive strength (UCS), and this is due to micro-crack connections and growing fissures. Thermal damage at 600 °C is also greater when samples are quickly cooled. An ANOVA and a simple regression analysis are performed to discard the influence of the natural location of the borehole samples in the obtained experimental results. Finally, correlations to predict UCS and elastic modulus from volume, open porosity, and P-wave velocity after thermal treatment are proposed using simple exponential and potential functions to help make preliminary decisions after a tunnel fire. These predictive results on the effects of fire on Prada limestone will be considered for the definition of future fire intervention protocols in the Tres Ponts Tunnel. [ABSTRACT FROM AUTHOR]