Search

Households in emerging economies are subject to significant income risk and have low access to financial markets. Leveraging multiple administrative microdata sources, this paper documents significant heterogeneity in asset holdings, income, and income cyclicality across the distribution of Chilean households, as well as considerable income risk. Considering this evidence, we compare the transmission mechanisms between Heterogeneous-Agent New-Keynesian models with search and matching (SAM) and sticky wage frictions (SW), and between one-liquid-asset (OA) and two-asset (TA) specifications. We propose a decomposition of consumption responses into direct, indirect, average, and cross-sectional effects. We show that the transmission mechanisms depend on the labor market setup: in SAM-OA the transmission operates through average and direct effects, while in SW-OA it is through cross-sectional effects. Assets also matter, the transmission in the SW-TA has stronger direct and average effects than SW-OA.

Abstract This Supplement issue, presents five research articles which are distributed, mainly due to the subject they address, from the 8th International Work-Conference on Bioinformatics and Biomedical Engineering (IWBBIO 2020), which was held on line, during September, 30th–2nd October, 2020. These contributions have been chosen because of their quality and the importance of their findings. Those contributions were then invited to participate in this supplement for the following journals of BMC: BMC Bioinformatics and BMC Genomics. In the present Editorial in BMC journal, we summarize the contributions that provide a clear overview of the thematic areas covered by the IWBBIO conference, ranging from theoretical/review aspects to real-world applications of bioinformatic and biomedical engineering.

Abstract Background Pancreatic ductal carcinoma patients have a really poor prognosis given its difficult early detection and the lack of early symptoms. Digital pathology is routinely used by pathologists to diagnose the disease. However, visually inspecting the tissue is a time-consuming task, which slows down the diagnostic procedure. With the advances occurred in the area of artificial intelligence, specifically with deep learning models, and the growing availability of public histology data, clinical decision support systems are being created. However, the generalization capabilities of these systems are not always tested, nor the integration of publicly available datasets for pancreatic ductal carcinoma detection (PDAC). Methods In this work, we explored the performace of two weakly-supervised deep learning models using the two more widely available datasets with pancreatic ductal carcinoma histology images, The Cancer Genome Atlas Project (TCGA) and the Clinical Proteomic Tumor Analysis Consortium (CPTAC). In order to have sufficient training data, the TCGA dataset was integrated with the Genotype-Tissue Expression (GTEx) project dataset, which contains healthy pancreatic samples. Results We showed how the model trained on CPTAC generalizes better than the one trained on the integrated dataset, obtaining an inter-dataset accuracy of 90.62% ± 2.32 and an outer-dataset accuracy of 92.17% when evaluated on TCGA + GTEx. Furthermore, we tested the performance on another dataset formed by tissue micro-arrays, obtaining an accuracy of 98.59%. We showed how the features learned in an integrated dataset do not differentiate between the classes, but between the datasets, noticing that a stronger normalization might be needed when creating clinical decision support systems with datasets obtained from different sources. To mitigate this effect, we proposed to train on the three available datasets, improving the detection performance and generalization capabilities of a model trained only on TCGA + GTEx and achieving a similar performance to the model trained only on CPTAC. Conclusions The integration of datasets where both classes are present can mitigate the batch effect present when integrating datasets, improving the classification performance, and accurately detecting PDAC across different datasets.

Que las formas de hacer persistan en el tiempo se debe no sólo a su efectividad inicial, sino también a la inercia. Pero cuando dejan de ser útiles en términos prácticos, se hace necesario desmontarlas y repensarlas en función del contexto. Este proyecto muestra cómo un entorno económico adverso puede llevar a deconstruir las formas de hacer, forzando una redefinición del diseño arquitectónico.

If the ways of doing persist over time, it is due not only to their initial effectiveness but also to inertia. However, when they cease to be helpful in practical terms, it becomes necessary to dismantle them and rethink them depending on the context. This project shows how adverse economic circumstances can lead to deconstructing the ways of doing, forcing a redefinition of architectural design.

The diagnosis of different pathologies and stages of cancer using whole histopathology slide images (WSI) is the gold standard for determining the degree of tissue metastasis. The use of deep learning systems in the field of medical images, especially histopathology images, is becoming increasingly important. The training and optimization of deep neural network models involve fine-tuning parameters and hyperparameters such as learning rate, batch size (BS), and boost to improve the performance of the model in task-specific applications. Tuning hyperparameters is a major challenge in designing deep neural network models, having a large impact on the performance. This paper analyzes how the parameters and hyperparameters of a deep learning architecture affect the classification of colorectal cancer (CRC) histopathology images using the well-known VGG19 model. This paper also discusses the pre-processing of these images, such as the use of color normalization and stretching transformations on the data set. Among these hyperparameters, the most important neural network hyperparameter is the learning rate (LR). In this paper, different strategies for the optimization of LR are analyzed (both static and dynamic) and a new experiment based on the variation of LR is proposed (the relevance of dynamic strategies over fixed LR is highlighted), after each layer of the neural network together with decreasing variations according to the epochs. The results obtained are very remarkable, obtaining in the simulation an accurate system that achieves 96.4% accuracy on test images (for nine different tissue classes) using the triangular-cyclic learning rate.

The ITISE 2023 (9th International Conference on Time Series and Forecasting) sought to provide a discussion forum for scientists, engineers, educators and students about the latest ideas and realizations in the foundations, theory, models and applications for inter- disciplinary and multidisciplinary research encompassing the disciplines of computer science, mathematics, statistics, forecaster, econometric, etc [...]

Abstract Background Adenocarcinoma and squamous cell carcinoma are the two most prevalent lung cancer types, and their distinction requires different screenings, such as the visual inspection of histology slides by an expert pathologist, the analysis of gene expression or computer tomography scans, among others. In recent years, there has been an increasing gathering of biological data for decision support systems in the diagnosis (e.g. histology imaging, next-generation sequencing technologies data, clinical information, etc.). Using all these sources to design integrative classification approaches may improve the final diagnosis of a patient, in the same way that doctors can use multiple types of screenings to reach a final decision on the diagnosis. In this work, we present a late fusion classification model using histology and RNA-Seq data for adenocarcinoma, squamous-cell carcinoma and healthy lung tissue. Results The classification model improves results over using each source of information separately, being able to reduce the diagnosis error rate up to a 64% over the isolate histology classifier and a 24% over the isolate gene expression classifier, reaching a mean F1-Score of 95.19% and a mean AUC of 0.991. Conclusions These findings suggest that a classification model using a late fusion methodology can considerably help clinicians in the diagnosis between the aforementioned lung cancer cancer subtypes over using each source of information separately. This approach can also be applied to any cancer type or disease with heterogeneous sources of information.

Abstract In the current supplement, we are proud to present seventeen relevant contributions from the 6th International Work-Conference on Bioinformatics and Biomedical Engineering (IWBBIO 2018), which was held during April 25-27, 2018 in Granada (Spain). These contributions have been chosen because of their quality and the importance of their findings.

Early diagnosis of cancer is very important as it significantly increases the chances of appropriate treatment and survival. To this end, Deep Learning models are increasingly used in the classification and segmentation of histopathological images, as they obtain high accuracy index and can help specialists. In most cases, images need to be preprocessed for these models to work correctly. In this paper, a comparative study of different preprocessing methods and deep learning models for a set of breast cancer images is presented. For this purpose, the statistical test ANOVA with data obtained from the performance of five different deep learning models is analyzed. An important conclusion from this test can be obtained; from the point of view of the accuracy of the system, the main repercussion is the deep learning models used, however, the filter used for the preprocessing of the image, has no statistical significance for the behavior of the system.

La construcción con tableros contralaminados de madera (CLT) posee relevantes capacidades de prefabricación y desempeño ambiental, por lo que se ha comenzado a aplicar en algunas edificaciones. Este trabajo analiza las condiciones de modulación arquitectónica de construcciones de pequeño tamaño en CLT, con el fin de determinar estrategias de diseño y de estandarización productiva que fomenten su utilización. Se revisan primero características de los tableros, y luego dimensiones arquitectónicas en una muestra internacional de casos, identificando convergencias en las magnitudes y ordenaciones, así como una versatilidad de diseño y expresión espacial. Estas propiedades revelan la posibilidad de focalizar la producción de tableros en las dimensiones y configuraciones más utilizadas, para facilitar su elaboración y aplicación, como también diversificar disposiciones arquitectónicas para promover esta tecnología constructiva.

In this contribution, a novel methodology for multi-class classification in the field of Parkinson’s disease is proposed. The methodology is structured in two phases. In a first phase, the most relevant volumes of interest (VOI) of the brain are selected by means of an evolutionary multi-objective optimization (MOE) algorithm. Each of these VOIs are subjected to volumetric feature extraction using the Three-Dimensional Discrete Wavelet Transform (3D-DWT). When applying 3D-DWT, a high number of coefficients is obtained, requiring the use of feature selection/reduction algorithms to find the most relevant features. The method used in this contribution is based on Mutual Redundancy (MI) and Minimum Maximum Relevance (mRMR) and PCA. To optimize the VOI selection, a first group of 550 MRI was used for the 5 classes: PD, SWEDD, Prodromal, GeneCohort and Normal. Once the Pareto Front of the solutions is obtained (with varying degrees of complexity, reflected in the number of selected VOIs), these solutions are tested in a second phase. In order to analyze the SVM classifier accuracy, a test set of 367 MRI was used. The methodology obtains relevant results in multi-class classification, presenting several solutions with different levels of complexity and precision (Pareto Front solutions), reaching a result of 97% as the highest precision in the test data.

The demand for energy storage is increasing massively due to the electrification of transport and the expansion of renewable energies. Current battery technologies cannot satisfy this growing demand as they are difficult to recycle, as the necessary raw materials are mined under precarious conditions, and as the energy density is insufficient. Metal–air batteries offer a high energy density as there is only one active mass inside the cell and the cathodic reaction uses the ambient air. Various metals can be used, but zinc is very promising due to its disposability and non-toxic behavior, and as operation as a secondary cell is possible. Typical characteristics of zinc–air batteries are flat charge and discharge curves. On the one hand, this is an advantage for the subsequent power electronics, which can be optimized for smaller and constant voltage ranges. On the other hand, the state determination of the system becomes more complex, as the voltage level is not sufficient to determine the state of the battery. In this context, electrochemical impedance spectroscopy is a promising candidate as the resulting impedance spectra depend on the state of charge, working point, state of aging, and temperature. Previous approaches require a fixed operating state of the cell while impedance measurements are being performed. In this publication, electrochemical impedance spectroscopy is therefore combined with various machine learning techniques to also determine successfully the state of charge during charging of the cell at non-fixed charging currents.

Abstract Background Nowadays, many public repositories containing large microarray gene expression datasets are available. However, the problem lies in the fact that microarray technology are less powerful and accurate than more recent Next Generation Sequencing technologies, such as RNA-Seq. In any case, information from microarrays is truthful and robust, thus it can be exploited through the integration of microarray data with RNA-Seq data. Additionally, information extraction and acquisition of large number of samples in RNA-Seq still entails very high costs in terms of time and computational resources.This paper proposes a new model to find the gene signature of breast cancer cell lines through the integration of heterogeneous data from different breast cancer datasets, obtained from microarray and RNA-Seq technologies. Consequently, data integration is expected to provide a more robust statistical significance to the results obtained. Finally, a classification method is proposed in order to test the robustness of the Differentially Expressed Genes when unseen data is presented for diagnosis. Results The proposed data integration allows analyzing gene expression samples coming from different technologies. The most significant genes of the whole integrated data were obtained through the intersection of the three gene sets, corresponding to the identified expressed genes within the microarray data itself, within the RNA-Seq data itself, and within the integrated data from both technologies. This intersection reveals 98 possible technology-independent biomarkers. Two different heterogeneous datasets were distinguished for the classification tasks: a training dataset for gene expression identification and classifier validation, and a test dataset with unseen data for testing the classifier. Both of them achieved great classification accuracies, therefore confirming the validity of the obtained set of genes as possible biomarkers for breast cancer. Through a feature selection process, a final small subset made up by six genes was considered for breast cancer diagnosis. Conclusions This work proposes a novel data integration stage in the traditional gene expression analysis pipeline through the combination of heterogeneous data from microarrays and RNA-Seq technologies. Available samples have been successfully classified using a subset of six genes obtained by a feature selection method. Consequently, a new classification and diagnosis tool was built and its performance was validated using previously unseen samples.

Uno de los grandes contenidos de la enseñanza es el estudio del medio o entorno geográfico, el cual se traduce en el estudio del paisaje, en especial el paisaje urbano como un contenido pedagógico. El paisaje es un concepto trabajado de forma transversal por otras disciplinas y en diferentes niveles psicoevolutivos, especialmente para la comprensión de las Ciencias Sociales y el desarrollo de una ciudadanía responsable, participativa y crítica. Una de las formas de aprenderlo y enseñarlo es a través de la percepción directa, tutelada, reflexionada e intencionada, es decir, una percepción razonada como es la observación, la cual se puede realizar con el recurso didáctico de los estudios de campo o terreno y en especial con los denominados itinerarios urbanos. PALABRAS CLAVE: Paisaje urbano, medio, entorno, percepción, observación directa, itinerario, educación activa, heitmatkunde.

In more recent years, a significant increase in the number of available biological experiments has taken place due to the widespread use of massive sequencing data. Furthermore, the continuous developments in the machine learning and in the high performance computing areas, are allowing a faster and more efficient analysis and processing of this type of data. However, biological information about a certain disease is normally widespread due to the use of different sequencing technologies and different manufacturers, in different experiments along the years around the world. Thus, nowadays it is of paramount importance to attain a correct integration of biologically-related data in order to achieve genuine benefits from them. For this purpose, this work presents an integration of multiple Microarray and RNA-seq platforms, which has led to the design of a multiclass study by collecting samples from the main four types of leukemia, quantified at gene expression. Subsequently, in order to find a set of differentially expressed genes with the highest discernment capability among different types of leukemia, an innovative parameter referred to as coverage is presented here. This parameter allows assessing the number of different pathologies that a certain gen is able to discern. It has been evaluated together with other widely known parameters under assessment of an ANOVA statistical test which corroborated its filtering power when the identified genes are subjected to a machine learning process at multiclass level. The optimal tuning of gene extraction evaluated parameters by means of this statistical test led to the selection of 42 highly relevant expressed genes. By the use of minimum-Redundancy Maximum-Relevance (mRMR) feature selection algorithm, these genes were reordered and assessed under the operation of four different classification techniques. Outstanding results were achieved by taking exclusively the first ten genes of the ranking into consideration. Finally, specific literature was consulted on this last subset of genes, revealing the occurrence of practically all of them with biological processes related to leukemia. At sight of these results, this study underlines the relevance of considering a new parameter which facilitates the identification of highly valid expressed genes for simultaneously discerning multiple types of leukemia.

El presente artículo tiene como objetivo estudiar la concepción otológica planteada por el Realismo Estructural Óntico (REO), la que, a grandes rasgos, postula que el foco ontológico debiese estar puesto en las relaciones y no en los objetos. Esto, a su vez, constituiría una interpretación realista de las teorías físicas actuales. Como una posible defensa a la postura planteada por el REO, se estudiará el concepto de relaciones no-supervinientes y se afirmará que son este tipo de relaciones las que adquieren un carácter fundamental en Mecánica Cuántica, como, por ejemplo, en fenómenos como el denominado entrelazamiento cuántico (entaglement).

Applying differentially expressed genes (DEGs) to identify feasible biomarkers in diseases can be a hard task when working with heterogeneous datasets. Expression data are strongly influenced by technology, sample preparation processes, and/or labeling methods. The proliferation of different microarray platforms for measuring gene expression increases the need to develop models able to compare their results, especially when different technologies can lead to signal values that vary greatly. Integrative meta-analysis can significantly improve the reliability and robustness of DEG detection. The objective of this work was to develop an integrative approach for identifying potential cancer biomarkers by integrating gene expression data from two different platforms. Pancreatic ductal adenocarcinoma (PDAC), where there is an urgent need to find new biomarkers due its late diagnosis, is an ideal candidate for testing this technology. Expression data from two different datasets, namely Affymetrix and Illumina (18 and 36 PDAC patients, respectively), as well as from 18 healthy controls, was used for this study. A meta-analysis based on an empirical Bayesian methodology (ComBat) was then proposed to integrate these datasets. DEGs were finally identified from the integrated data by using the statistical programming language R. After our integrative meta-analysis, 5 genes were commonly identified within the individual analyses of the independent datasets. Also, 28 novel genes that were not reported by the individual analyses ('gained' genes) were also discovered. Several of these gained genes have been already related to other gastroenterological tumors. The proposed integrative meta-analysis has revealed novel DEGs that may play an important role in PDAC and could be potential biomarkers for diagnosing the disease.

Most of the research studies developed applying microarray technology to the characterization of different pathological states of any disease may fail in reaching statistically significant results. This is largely due to the small repertoire of analysed samples, and to the limitation in the number of states or pathologies usually addressed. Moreover, the influence of potential deviations on the gene expression quantification is usually disregarded. In spite of the continuous changes in omic sciences, reflected for instance in the emergence of new Next-Generation Sequencing-related technologies, the existing availability of a vast amount of gene expression microarray datasets should be properly exploited. Therefore, this work proposes a novel methodological approach involving the integration of several heterogeneous skin cancer series, and a later multiclass classifier design. This approach is thus a way to provide the clinicians with an intelligent diagnosis support tool based on the use of a robust set of selected biomarkers, which simultaneously distinguishes among different cancer-related skin states. To achieve this, a multi-platform combination of microarray datasets from Affymetrix and Illumina manufacturers was carried out. This integration is expected to strengthen the statistical robustness of the study as well as the finding of highly-reliable skin cancer biomarkers. Specifically, the designed operation pipeline has allowed the identification of a small subset of 17 differentially expressed genes (DEGs) from which to distinguish among 7 involved skin states. These genes were obtained from the assessment of a number of potential batch effects on the gene expression data. The biological interpretation of these genes was inspected in the specific literature to understand their underlying information in relation to skin cancer. Finally, in order to assess their possible effectiveness in cancer diagnosis, a cross-validation Support Vector Machines (SVM)-based classification including feature ranking was performed. The accuracy attained exceeded the 92% in overall recognition of the 7 different cancer-related skin states. The proposed integration scheme is expected to allow the co-integration with other state-of-the-art technologies such as RNA-seq.

Low back pain is the most prevalent musculoskeletal condition. This disorder constitutes one of the most common causes of disability worldwide, and as a result, it has a severe socioeconomic impact. Endurance tests are normally considered in low back pain rehabilitation practice to assess the muscle status. However, traditional procedures to evaluate these tests suffer from practical limitations, which potentially lead to inaccurate diagnoses. The use of digital technologies is considered here to facilitate the task of the expert and to increase the reliability and interpretability of the endurance tests. This work presents mDurance, a novel mobile health system aimed at supporting specialists in the functional assessment of trunk endurance by using wearable and mobile devices. The system employs a wearable inertial sensor to track the patient trunk posture, while portable electromyography sensors are used to seamlessly measure the electrical activity produced by the trunk muscles. The information registered by the sensors is processed and managed by a mobile application that facilitates the expert’s normal routine, while reducing the impact of human errors and expediting the analysis of the test results. In order to show the potential of the mDurance system, a case study has been conducted. The results of this study prove the reliability of mDurance and further demonstrate that practitioners are certainly interested in the regular use of a system of this nature.

Most wearable activity recognition systems assume a predefined sensor deployment that remains unchanged during runtime. However, this assumption does not reflect real-life conditions. During the normal use of such systems, users may place the sensors in a position different from the predefined sensor placement. Also, sensors may move from their original location to a different one, due to a loose attachment. Activity recognition systems trained on activity patterns characteristic of a given sensor deployment may likely fail due to sensor displacements. In this work, we innovatively explore the effects of sensor displacement induced by both the intentional misplacement of sensors and self-placement by the user. The effects of sensor displacement are analyzed for standard activity recognition techniques, as well as for an alternate robust sensor fusion method proposed in a previous work. While classical recognition models show little tolerance to sensor displacement, the proposed method is proven to have notable capabilities to assimilate the changes introduced in the sensor position due to self-placement and provides considerable improvements for large misplacements.

Signal segmentation is a crucial stage in the activity recognition process; however, this has been rarely and vaguely characterized so far. Windowing approaches are normally used for segmentation, but no clear consensus exists on which window size should be preferably employed. In fact, most designs normally rely on figures used in previous works, but with no strict studies that support them. Intuitively, decreasing the window size allows for a faster activity detection, as well as reduced resources and energy needs. On the contrary, large data windows are normally considered for the recognition of complex activities. In this work, we present an extensive study to fairly characterize the windowing procedure, to determine its impact within the activity recognition process and to help clarify some of the habitual assumptions made during the recognition system design. To that end, some of the most widely used activity recognition procedures are evaluated for a wide range of window sizes and activities. From the evaluation, the interval 1–2 s proves to provide the best trade-off between recognition speed and accuracy. The study, specifically intended for on-body activity recognition systems, further provides designers with a set of guidelines devised to facilitate the system definition and configuration according to the particular application requirements and target activities.

Feature or variable selection still remains an unsolved problem, due to the infeasible evaluation of all the solution space. Several algorithms based on heuristics have been proposed so far with successful results. However, these algorithms were not designed for considering very large datasets, making their execution impossible, due to the memory and time limitations. This paper presents an implementation of a genetic algorithm that has been parallelized using the classical island approach, but also considering graphic processing units to speed up the computation of the fitness function. Special attention has been paid to the population evaluation, as well as to the migration operator in the parallel genetic algorithm (GA), which is not usually considered too significant; although, as the experiments will show, it is crucial in order to obtain robust results.

The main objective of fusion mechanisms is to increase the individual reliability of the systems through the use of the collectivity knowledge. Moreover, fusion models are also intended to guarantee a certain level of robustness. This is particularly required for problems such as human activity recognition where runtime changes in the sensor setup seriously disturb the reliability of the initial deployed systems. For commonly used recognition systems based on inertial sensors, these changes are primarily characterized as sensor rotations, displacements or faults related to the batteries or calibration. In this work we show the robustness capabilities of a sensor-weighted fusion model when dealing with such disturbances under different circumstances. Using the proposed method, up to 60% outperformance is obtained when a minority of the sensors are artificially rotated or degraded, independent of the level of disturbance (noise) imposed. These robustness capabilities also apply for any number of sensors affected by a low to moderate noise level. The presented fusion mechanism compensates the poor performance that otherwise would be obtained when just a single sensor is considered.

Heart disease is currently one of the leading causes of death in developed countries. The electrocardiogram is an important source of information for identifying these conditions, therefore, becomes necessary to seek an advanced system of diagnosis based on these signals. In this paper we used samples of electrocardiograms of MIT-related database with ten types of pathologies and a rate corresponding to normal (healthy patient), which are processed and used for extraction from its two branches of a wide range of features. Next, various techniques have been applied to feature selection based on genetic algorithms, principal component analysis and mutual information. To carry out the task of intelligent classification, 3 different scenarios have been considered. These techniques allow us to achieve greater efficiency in the classification methods used, namely support vector machines (SVM) and decision trees (DT) to perform a comparative analysis between them. Finally, during the development of this contribution, the use of very non-invasive devices (2 channel ECG) was analyzed, we could practically classify them as wearable, which would not need interaction by the user, and whose energy consumption is very small to extend the average life of the user been on it.

Performance Status (PS) variability is a powerful tool to evaluate overall condition, treatment needs and survival chances of cancer patients. Traditionally, its assessment has relied on the experience of oncologists when interpreting results of clinical tests and when interviewing the patients. Meanwhile, consumer-level activity trackers have obtained good results in behavior-change oriented intervention trials and Fitbit devices have demonstrated enough reliability to provide objective data related to physical activity, but the clinical possibilities of the data collected has been neglected. This work presents a system design for ubiquitous assessment of PS by means of objective and quantifiable data from different sources: medical history, self-reported quality-of-life questionnaires and a commercial activity tracker Fitbit Alta HR. The system proposed aims to contextualize and model the recovery process of breast cancer patients during chemotherapy treatment.

The present work analyses the wireless sensor network protocol (DARP) and the impact of different configuration parameter sets on its performance. Different scenarios have been considered, in order to gain a better understanding of the influence of the configuration on network protocols. The developed statistical analysis is based on the method known as Analysis of Variance (ANOVA), which focuses on the effect of the configuration on the performance of DARP. Three main dependent variables were considered: number of control messages sent during the set-up time, energy consumption and convergence time. A total of 20,413 simulations were carried out to ensure greater robustness in the statistical conclusions. The main goal of this work is to discover the most critical configuration parameters for the protocol, with a view to potential applications in Smart City type scenarios.

In this paper, a temperature control in real time control process was presented using several control algorithms. A quantitative comparison based on the real power consumption and (the precision and the robustness) of these controllers during the same control process and under the same conditions will be done. The proposed Adaptive and Self Organizing Fuzzy policy has been able to prove its superiority against the remaining controllers. The new Adaptive and Self Organizing Fuzzy Logic Controller starts the control with a very limited information about the controlled process (delay and the monotonicity sign) and without any kind of offline pre-training, the adaptive controller acts online to collect the necessary background to adapt their rules consequents and to self organize their membership functions from the real behavior of the controlled process. During 200 minutes and under the same conditions all the performed controllers have been used to control the room temperature, each simulation has been repeated five times with two different sets of set points. These amounts of results was used as a set of sampling for the statistical tool ANOVA (Analysis of Variance) that can prove and illustrate the validity and the extrapolability of the conclusions extracted from several stages of this work.

Technological advances on the development of mobile devices, medical sensors, and wireless communication systems support a new generation of unobtrusive, portable, and ubiquitous health monitoring systems for continuous patient assessment and more personalized health care. There exist a growing number of mobile apps in the health domain; however, little contribution has been specifically provided, so far, to operate this kind of apps with wearable physiological sensors. The PhysioDroid, presented in this paper, provides a personalized means to remotely monitor and evaluate users’ conditions. The PhysioDroid system provides ubiquitous and continuous vital signs analysis, such as electrocardiogram, heart rate, respiration rate, skin temperature, and body motion, intended to help empower patients and improve clinical understanding. The PhysioDroid is composed of a wearable monitoring device and an Android app providing gathering, storage, and processing features for the physiological sensor data. The versatility of the developed app allows its use for both average users and specialists, and the reduced cost of the PhysioDroid puts it at the reach of most people. Two exemplary use cases for health assessment and sports training are presented to illustrate the capabilities of the PhysioDroid. Next technical steps include generalization to other mobile platforms and health monitoring devices.

Recent years have witnessed a huge progress in the automatic identification of individual primitives of human behavior, such as activities or locations. However, the complex nature of human behavior demands more abstract contextual information for its analysis. This work presents an ontology-based method that combines low-level primitives of behavior, namely activity, locations and emotions, unprecedented to date, to intelligently derive more meaningful high-level context information. The paper contributes with a new open ontology describing both low-level and high-level context information, as well as their relationships. Furthermore, a framework building on the developed ontology and reasoning models is presented and evaluated. The proposed method proves to be robust while identifying high-level contexts even in the event of erroneously-detected low-level contexts. Despite reasonable inference times being obtained for a relevant set of users and instances, additional work is required to scale to long-term scenarios with a large number of users.