Search

This paper presents a methodology to learn surrogate models of steady state fluid dynamics simulations on meshed domains, based on Implicit Neural Representations (INRs). The proposed models can be applied directly to unstructured domains for different flow conditions, handle non-parametric 3D geometric variations, and generalize to unseen shapes at test time. The coordinate-based formulation naturally leads to robustness with respect to discretization, allowing an excellent trade-off between computational cost (memory footprint and training time) and accuracy. The method is demonstrated on two industrially relevant applications: a RANS dataset of the two-dimensional compressible flow over a transonic airfoil and a dataset of the surface pressure distribution over 3D wings, including shape, inflow condition, and control surface deflection variations. On the considered test cases, our approach achieves a more than three times lower test error and significantly improves generalization error on unseen geometries compared to state-of-the-art Graph Neural Network architectures. Remarkably, the method can drastically accelerate high fidelity numerical solver, achieving a five order of magnitude speedup on the RANS transonic airfoil dataset., (© 2024. The Author(s).)

Ultrasonic de-icing systems are energy-efficient solutions for ice protection. The systems generate high levels of stress in the ice by inducing vibrations in the substrate, resulting in bulk or adhesive ice failure and, ultimately, ice removal. For this purpose, two types of resonant modes can be excited: flexural and extensional modes. The extensional modes have the interesting ability to de-ice substantial areas of the underlying surface as long as they are pure and do not interfere with the flexural modes. However, the coupling between extensional and flexural modes occurs naturally for thin ice-covered substrates. The inertial effect that explains this coupling is demonstrated in this paper by means of the Euler-Lagrange approach. The Euler-Lagrange model also shows how the inertial effect can be eliminated by carefully adjusting the ratio of Young's modulus to substrate density to be close to that of ice. Finally, the paper details how multilayered or architectured materials can be used to design piezoelectric plate-like structures to achieve pure extensional modes for de-icing. The ultrasonic de-icing capabilities are demonstrated on prototypes covered with freezer ice., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

To contribute to the development of sustainable composites, this work investigates the effects of moisture on the key AE characteristics related to the damage mechanisms of a bio-based balsa wood core sandwich in 4-point bending tests, including cumulative counts, amplitude, peak frequency, and duration. Novel triple dog-bone balsa wood core sandwich specimens with different MC (moisture content) were studied by comparing microscopic observations and a proposed two-step clustering approach in AE analysis. Three MC states, i.e., dry, 50% MC, and 120% MC, are discussed. GFRP (glass-fiber-reinforced polymer) laminate skin damages were found to be predominant in most GFRP-balsa sandwich specimens, but balsa wood core damages play a more important role as MC increases. The degradation of the bending stiffness of the sandwich was proven to be faster in the first linear stage of the moisture absorption curve, while the decrease in bending strength was more pronounced at the MC saturation level. Finally, for all of the dry and wet sandwich specimens, peak frequency and duration were proven to be more helpful in identifying damages associated with the lighter bio-based balsa wood core, such as balsa core damages and skin/core debonding.

Despite the well-established nature of non-destructive testing (NDT) technologies, autonomous monitoring systems are still in high demand. The solution lies in harnessing the potential of intelligent structures, particularly in industries like aeronautics. Substantial downtime occurs due to routine maintenance, leading to lost revenue when aircraft are grounded for inspection and repairs. This article explores an innovative approach using intelligent materials to enhance condition-based maintenance, ultimately cutting life-cycle costs. The study emphasizes a paradigm shift toward structural health monitoring (SHM), utilizing embedded sensors for real-time monitoring. Active thin film piezoelectric materials are proposed for their integration into composite structures. The work evaluates passive sensing through acoustic emission (AE) signals and active sensing using Lamb wave propagation, presenting amplitude-based and frequency domain approaches for damage detection. A comprehensive signal processing approach is presented, and the damage index and damage size correlation function are introduced to enable continuous monitoring due to their sensitivity to changes in material properties and defect severity. Additionally, finite element modeling and experimental validation are proposed to enhance their understanding and applicability. This research contributes to developing more efficient and cost-effective aircraft maintenance approaches through SHM, addressing the competitive demands of the aeronautic industry.

Wheelchair fencing is an opposition sport on a specific wheelchair, with a fixed distance between the two athletes. As for other Paralympic sports, different categories exist for the different pathologies of the athletes. Searching for biomechanical performance criteria is of primary interest for coaches, recruiters and trainers. Such performance criteria have been highlighted for able-bodied fencers but not for para-fencers. Through transposition, the corresponding parameters for para-fencers would be the weapon speed and the ability to move the trunk forward and backward on their wheelchair. Therefore, the objective of this study was to determine performance criteria for para-fencers. Eleven French para-fencers performed fencing activities with a motion capture system while facing each other, with their own equipment. Different activities were realised to quantify the allonge, the weapon speed, and the torso motion. Only the correlation between the range of motion of the torso and the mass of the athletes wielding an épée was significant ( p = 0.02 ). The comparison between the different categories showed significant differences for the torso motion, which was not found for the weapon speed. Future studies, with a larger cohort, might help validate, or not, tendencies found in this study.

Background: Although impairments in dorso-lumbar spine mobility have been previously reported in patients with low back pain, its exact mechanism is not yet clear. Therefore, the purpose of this systematic review and meta-analysis is to investigate and compare spinal kinematics between subjects with and without low back pain and identify appropriate tools to evaluate it., Methods: The PubMed, Scopus and Web of Science databases were searched for relevant literature. The search strategy was mainly focused on studies investigating lumbar kinematics in subjects with and without low back pain during clinical functional tests, gait, sports and daily functional activities. Papers were selected if at least one of these outputs was reported: lumbar range of motion, lumbar velocity, lumbar acceleration and deceleration, lordosis angle or lumbar excursion., Findings: Among 804 papers, 48 met the review eligibility criteria and 29 were eligible to perform a meta-analysis. Lumbar range of motion was the primary outcome measured. A statistically significant limitation of the lumbar mobility was found in low back pain group in all planes, and in the frontal and transverse planes for thoracic range of motion, but there is no significant limitation for pelvic mobility. The amount of limitation was found to be more important in the lumbar sagittal plane and during challenging functional activities in comparison with simple activities., Interpretation: The findings of this review provide insight into the impact of low back pain on spinal kinematics during specific movements, contributing to our understanding of this relationship and suggesting potential clinical implications., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Microscale residual stress may develop during the manufacturing of Carbon Fiber-Reinforced Polymer (CFRP) composites and negatively affect apparent macroscale mechanical properties. Accordingly, accurately capturing residual stress may be essential in computational methods used for composite material design. This work presents a new data-driven methodology for the evaluation of microscale residual stress in CFRPs using fiber push-out experiments with in situ scanning electron microscopy (SEM) imaging. SEM images reveal significant through-thickness matrix sink-in deformation in resin-rich areas after nearby fibers are pushed out, which is attributed to the release of microscale process-induced residual stress. The sink-in deformation is measured experimentally, and a Finite Element Model Updating (FEMU) method is used to retrieve the associated residual stress. The finite element (FE) analysis includes simulation of the curing process, test sample machining, and fiber push-out experiment. Significant out-of-plane matrix deformation larger than 1% of the specimen thickness is reported and associated with a high level of residual stress in resin-rich areas. This work emphasizes the importance of in situ data-driven characterization for integrated computational materials engineering (ICME) and material design.

Thermometry techniques have been widely developed during the last decades to analyze thermal properties of various fluid flows. Following the increasing interest for microfluidic applications, most of these techniques have been adapted to the microscale and some new experimental approaches have emerged. In the last years, the need for a detailed experimental analysis of gaseous microflows has drastically grown due to a variety of exciting new applications. Unfortunately, thermometry is not yet well developed for analyzing gas flows at the microscale. Thus, the present review aims at analyzing the main currently available thermometry techniques adapted to microflows. Following a rapid presentation and classification of these techniques, the review is focused on optical techniques, which are the most suited for application at microscale. Their presentation is followed by a discussion about their applicability to gas microflows, especially in confined conditions, and the current challenges to be overcome are presented. A special place is dedicated to Raman and molecular tagging thermometry techniques due to their high potential and low intrusiveness.

Reactive thermoplastics matrices offer ease of processing using well-known molding techniques (such as Resin Transfer Molding) due to their initially low viscosity. For Polyamide 6 (PA6)/glass composites, the hydroxyl groups on the glass surface slow down the anionic ring-opening polymerization (AROP) reaction, and can ultimately inhibit it. This work aims to thoroughly control the hydroxyl groups and the surface chemistry of glass particulates to facilitate in situ AROP-an aspect that has been barely explored until now. A model system composed of a PA6 matrix synthesized by AROP is reinforced with calcinated and silanized glass microparticles. We systematically quantify, by TGA and FTIR, the complete particle surface modification sequence, from the dehydration, dehydroxylation and rehydroxylation processes, to the silanization step. Finally, the impact of the particle surface chemistry on the polymerization and crystallization of the PA6/glass composites was quantified by DSC. The results confirm that a careful balance is required between the dehydroxylation process, the simultaneous rehydroxylation and silane grafting, and the residual hydroxyl groups, in order to maintain fast polymerization and crystallization kinetics and to prevent reaction inhibition. Specifically, a hydroxyl concentration above 0.2 mmol OH·g -1 leads to a slowdown of the PA6 polymerization reaction. This reaction can be completely inhibited when the hydroxyl concentration reaches 0.77 mmol OH·g -1 as in the case of fully rehydroxylated particles or pristine raw particles. Furthermore, both the rehydroxylation and silanization processes can be realized simultaneously without any negative impact on the polymerization. This can be achieved with a silanization time of 2 h under the treatment conditions of the study. In this case, the silane agent gradually replaces the regenerated hydroxyls. This work provides a roadmap for the preparation of reinforced reactive thermoplastic materials.

This paper presents an analytical solution for the thermomechanical buckling of functionally graded material (FGM) sandwich plates. The solution is obtained using a four-variable equivalent-single-layer (ESL) plate theory. Two types of sandwich plates are included: one with FGM facesheets and homogeneous core, and vice versa for the other. The governing equations are derived based on the principle of minimum total potential energy. For simply supported boundary conditions, these equations are solved via the Navier method. The results on critical buckling load and temperature increment of simply supported FGM sandwich plates are compared with the available solutions in the literature. Several results are presented considering various material and geometrical parameters as well as their effect on the thermomechanical buckling response of FGM sandwich plates. The relationship between the mechanical load and the temperature increment for uniform/linear temperature rise of FGM sandwich plates under combined mechanical and thermal loads is studied.

This paper reports the design, fabrication and measured performance of a passive microelectromechanical transducer for the wireless monitoring of high irradiation doses in nuclear environments. The sensing device is composed of a polymer material (high-density polyethylene) sealed inside a cavity. Subjected to ionizing radiation, this material releases various gases, which increases the pressure inside the cavity and deflects a dielectric membrane. From the measurement of the deflection, the variation of the applied pressure can be estimated, and, in turn, the dose may be determined. The microelectromechanical structure can also be used to study and validate the radiolysis properties of the polymer through its gas emission yield factor. Measurement of the dielectric membrane deflection is performed here to validate on the one hand the required airtightness of the cavity exposed to doses about 4 MGy and on the other hand, the functionality of the fabricated dosimeter for doses up to 80 kGy. The selection of appropriate materials for the microelectromechanical device is discussed, and the outgassing properties of the selected high-density polyethylene are analysed. Moreover, the technological fabrication process of the transducer is detailed.

This article presents a comprehensive thermomechanical analysis and failure assessment in the drilling of glass fiber-reinforced polymer (GFRP) composites with different thicknesses using a CNC machine and cemented carbide drill with a diameter of 6 mm and point angles of ϕ = 118°. The temperature distribution through drilling was measured using two techniques. The first technique was based on contactless measurements using an IR Fluke camera. The second was based on contact measurements using two thermocouples inserted inside the drill bit. A Kistler dynamometer was used to measure the cutting forces. The delamination factors at the hole exit and hole entry were quantified by using the image processing technique. Multi-variable regression analysis and surface plots were performed to illustrate the significant coefficients and contribution of the machining variables (i.e., feed, speed, and laminate thickness) on machinability parameters (i.e., the thrust force, torque, temperatures, and delamination). It is concluded that the cutting time, as a function of machining variables, has significant control over the induced temperature and, thus, the force, torque, and delamination factor in drilling GFRP composites. The maximum temperature recorded by the IR camera is lower than that of the instrumented drill because the IR camera cannot directly measure the tool-work interaction zone during the drilling process. At the same cutting condition, it is observed that by increasing the thickness of the specimen, the temperature increased. Increasing the thickness from 2.6 to 7.7 had a significant effect on the heat distribution of the HAZ. At a smaller thickness, increasing the cutting speed from 400 to 1600 rpm decreased the maximum thrust force by 15%. The push-out delaminations of the GFRP laminate were accompanied by edge chipping, spalling, and uncut fibers, which were higher than those of the peel-up delaminations., Competing Interests: The authors declare no conflict of interest.

Understanding the behavior of a single particle flowing in a microchannel is a necessary step in designing and optimizing efficient microfluidic devices for the separation, concentration, counting, detecting, sorting, or mixing of particles in suspension. Although the inertial migration of spherical particles has been deeply investigated in the last two decades, most of the targeted applications involve shaped particles whose behavior in microflows is still far from being completely understood. While traveling in a channel, a particle both rotates and translates: it translates in the streamwise direction driven by the fluid flow but also in the cross-section perpendicular to the streamwise direction due to inertial effects. In addition, particles' rotation and translation motions are coupled. Most of the existing works investigating the transport of particles in microchannels decouple their rotational and lateral migration behaviors: particle rotation is mainly studied in simple shear flows, whereas lateral migration is neglected, and studies on lateral migration mostly focus on spherical particles whose rotational behavior is simple. The aim of this review is to provide a summary of the different works existing in the literature on the inertial migration and the rotational behavior of non-spherical particles with a focus and discussion on the remaining scientific challenges in this field.

Metal Additive Manufacturing and Laser Powder Bed Fusion (LPBF), in particular, have come forth in recent years as an outstanding innovative manufacturing approach. The LPBF process is notably characterized by very high solidification and cooling rates, as well as repeated abrupt heating and cooling cycles, which generate the build-up of anisotropic microstructure and residual stresses. Post-processing stress-relieving heat treatments at elevated temperatures are often required in order to release some of these stresses. The effects of 1 h-hold heat treatments at different specific temperatures (solutionizing, annealing, stress-relieve and low-temperature stress-relieve) on residual stress levels together with microstructure characterization were therefore investigated for the popular Alloy 625 produced by LPBF. The build-up of residual stress is accommodated by the formation of dislocations that produce local crystallographic misorientation within grains. Electron backscattered diffraction (EBSD) was used to investigate local misorientation by means of orientation imaging, thereby assessing misorientation or strain levels, in turn representing residual stress levels within the material. The heavily constrained as-built material was found to experience full recrystallization of equiaxed grains after solutionizing at 1150 °C, accompanied by significant drop of residual stress levels due to this grains reconfiguration. Heat treatments at lower temperatures however, even as high as the annealing temperature of 980 °C, were found to be insufficient to promote recrystallization though effective to some extent to release residual stress through apparently dislocations recovery. Average misorientation data obtained by EBSD were found valuable to evaluate qualitatively residual stress levels. The effects of the different heat treatments are discussed and suggest that the peculiar microstructure of alloys produced by LPBF can possibly be transformed to suit specific applications.

Formaldehyde (HCHO), a chemical compound used in the fabrication process of a broad range of household products, is present indoors as an airborne pollutant due to its high volatility caused by its low boiling point ( T = - 19 °C). Miniaturization of analytical systems towards palm-held devices has the potential to provide more efficient and more sensitive tools for real-time monitoring of this hazardous air pollutant. This work presents the initial steps and results of the prototyping process towards on-chip integration of HCHO sensing, based on the Hantzsch reaction coupled to the fluorescence optical sensing methodology. This challenge was divided into two individually addressed problems: (1) efficient airborne HCHO trapping into a microfluidic context and (2) 3,5-diacetyl-1,4-dihydrolutidine (DDL) molecular sensing in low interrogation volumes. Part (2) was addressed in this paper by proposing, fabricating, and testing a fluorescence detection system based on an ultra-low light Complementary metal-oxide-semiconductor (CMOS) image sensor. Two three-layer fluidic cell configurations ( quartz -SU-8-quartz and silicon -SU-8-quartz) were tested, with both possessing a 3.5 µL interrogation volume. Finally, the CMOS-based fluorescence system proved the capability to detect an initial 10 µg/L formaldehyde concentration fully derivatized into DDL for both the quartz and silicon fluidic cells, but with a higher signal-to-noise ratio ( SNR ) for the silicon fluidic cell ( S N R s i l i c o n = 6.1 ) when compared to the quartz fluidic cell ( S N R q u a r t z = 4.9 ). The signal intensity enhancement in the silicon fluidic cell was mainly due to the silicon absorption coefficient at the excitation wavelength,   a ( λ a b s = 420   nm ) = 5 × 10 4   cm - 1 , which is approximately five times higher than the absorption coefficient at the fluorescence emission wavelength, a ( λ e m = 515   nm ) = 9.25 × 10 3   cm - 1 .

Direct measurements of the slip velocity in rarefied gas flows produced by local thermodynamic non-equilibrium at the wall represent crucial information for the validation of existing theoretical and numerical models. In this work, molecular tagging velocimetry (MTV) by direct phosphorescence is applied to argon and helium flows at low pressures in a 1-mm deep channel. MTV has provided accurate measurements of the molecular displacement of the gas at average pressures of the order of 1 kPa. To the best of our knowledge, this work reports the very first flow visualizations of a gas in a confined domain and in the slip flow regime, with Knudsen numbers up to 0.014. MTV is cross-validated with mass flowrate measurements by the constant volume technique. The two diagnostic methods are applied simultaneously, and the measurements in terms of average velocity at the test section are in good agreement. Moreover, preliminary results of the slip velocity at the wall are computed from the MTV data by means of a reconstruction method.

A hydrogel can be formed by an organogelator in the presence of a nanoemulsion. It is expected that this is due to a gelation transfer from oil to water. The system started with an oil-in-water nanoemulsion prepared according to a phase inversion temperature (PIT) process. Into this nanoemulsion consisting of Kolliphor® RH40 and Brij® L4 as surfactants, and Miglyol® 812 as oil and water, we introduced the organogelator 12-hydroxyoctadecanoic acid (12-HOA) in the oil phase. After cooling at room temperature, a slow reversible gelation of the water phase occurred with persistence of the nanoemulsion. This thermally reversible system was investigated using various techniques (rheology, turbidimetry, optical and electron microscopies, scattering techniques). Successive stages appeared during the cooling process after the nanoemulsion formation, corresponding to the migration and self-assembly of the organogelator from the oil nanodroplets to the water phase. According to our measurements and the known self-assembly of 12-HOA, a mechanism explaining the formation of the gelled nanoemulsion is proposed.

In this paper, the development of a new device for high temperature emissivity measurement is described. This device aims at measuring both spectral and total emissivity for a thermal range of 600-1000 °C. The main targeted properties of this device are versatility and simplicity. To achieve this, a rigorous selection of components such as heating systems, heat sources, sample holders, and measuring devices was made. Sample dimensions and the corresponding sample holder were optimized through a ray tracing model computation. Selection of sensors to compute the total emissivity was also discussed. A near-infrared (NIR) spectrometer and two mid-infrared (MIR) cameras equipped with optical filters covering the bandwidth of 3-5 and 7.5-13 μm were chosen for spectral measurements. The major impediment was the separation of the sample signal and various spurious signals emitted by the environment. A specific measurement methodology was then made for each bandwidth to resolve this issue. Platinum was chosen as the reference material for the device validation. Spectral emissivity measurements were then compared to values from a commercial spectrometer. A good agreement was found between NIR and MIR band I measurements, and a higher error rate was seen in MIR band II which is explained by a less favorable signal to noise ratio. Integrated emissivity is then calculated and compared to values found in the literature. A good agreement between these values is found, and similar trends with temperature are observed. The device is then validated for spectral and total emissivity measurements. Device versatility and simplicity allow for an easy adaptation to a large area of applications.

In the aviation industry, automated inspection is essential for ensuring quality of production. It allows acceleration of procedures for quality control of parts or mechanical assemblies. As a result, the demand of intelligent visual inspection systems aimed at ensuring high quality in production lines is increasing. In this work, we address a very common problem in quality control. The problem is verification of presence of the correct part and verification of its position. We address the problem in two parts: first, automatic selection of informative viewpoints before the inspection process is started (offline preparation of the inspection) and, second, automatic treatment of the acquired images from said viewpoints by matching them with information in 3D CAD models is launched. We apply this inspection system for detecting defects on aeronautical mechanical assemblies with the aim of checking whether all the subparts are present and correctly mounted. The system can be used during manufacturing or maintenance operations. The accuracy of the system is evaluated on two kinds of platform. One is an autonomous navigation robot, and the other one is a handheld tablet. The experimental results show that our proposed approach is accurate and promising for industrial applications with possibility for real-time inspection.

The manufacturing process and architecture of three Knudsen type micropumps are discussed and the associated flow performance characteristics are investigated. The proposed fabrication process, based on the deposition of successive dry film photoresist layers with low thermal conductivity, is easy to implement, adaptive to specific applications, cost-effective, and significantly improves thermal management. Three target application designs, requiring high mass flow rates (pump A), high pressure differences (pump B), and relatively high mass flow rates and pressure differences (pump C), are proposed. Computations are performed based on kinetic modeling via the infinite capillary theory, taking into account all foreseen manufacturing and operation constraints. The performance characteristics of the three pump designs in terms of geometry (number of parallel microchannels per stage and number of stages) and inlet pressure are obtained. It is found that pumps A and B operate more efficiently at pressures higher than 5 kPa and lower than 20 kPa, respectively, while the optimum operation range of pump C is at inlet pressures between 1 kPa and 20 kPa. In all cases, it is advisable to have the maximum number of stages as well as of parallel microchannels per stage that can be technologically realized.

In this work, a compact gas chromatograph prototype for near real-time benzene, toluene, ethylbenzene and xylenes (BTEX) detection at sub-ppb levels has been developed. The system is composed of an aluminium preconcentrator (PC) filled with Basolite C300, a 20 m long Rxi-624 capillary column and a photoionization detector. The performance of the device has been evaluated in terms of adsorption capacity, linearity and sensitivity. Initially, PC breakthrough time for an equimolar 1 ppm BTEX mixture has been determined showing a remarkable capacity of the adsorbent to quantitatively trap BTEX even at high concentrations. Then, a highly linear relationship between sample volume and peak area has been obtained for all compounds by injecting 100-ppb samples with volumes ranging from 5⁻80 mL. Linear plots were also observed when calibration was conducted in the range 0⁻100 ppb using a 20 mL sampling volume implying a total analysis time of 19 min. Corresponding detection limits of 0.20, 0.26, 0.49, 0.80 and 1.70 ppb have been determined for benzene, toluene, ethylbenzene, m/p-xylenes and o-xylene, respectively. These experimental results highlight the potential applications of our device to monitor indoor or outdoor air quality., Competing Interests: The authors declare no conflict of interest.

The rheological behavior of mechanically dewatered sewage sludges is complex but essential as it affects almost all treatment, utilization and disposal operations, such as storage, pumping, land-spreading, or drying. In this work, a specific methodology coupling experiments and modelling is developed to characterize the rheological and textural properties of highly concentrated sludge. The experimental part based on a uniaxial compression method has been presented in a previous paper (Liang et al., 2017). This article is dedicated to the modelling part, which includes the behavior identification and the parameters optimization. Previous and additional mechanical tests allow the identification of a visco-elasto-plastic behavior. This behavior is then modelled with a Burgers-Ludwik model, with 7 rheological parameters. This model is able to simulate the viscoelastic behavior of sludge under the yield stress, and the visco-elasto-plastic hardening behavior over the yield stress. The optimization of model parameters is carried out in two steps and relies on the calculation of basins of attraction and confidence intervals with initial conditions estimated from the mechanical tests. Finally, the entire characterization methodology, from experimental mechanical tests to model parameter optimization, is applied to sludge samples at different operating conditions and structural states. The determination of the rheological properties of sludge is achieved with excellent matching between simulation and experimental results. Being able to take into account these impact factors, the rheological model can be used to predict the sludge behavior in various operating conditions., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Background: The aim was to compare the efficacy of the passive ultrasonic irrigation PUI and the Xp-endo Finisher (FKG-Dentaire, La-Chaux-de-Fonds, Switzerland) in removing the calcium hydroxide paste from root canals and from the apical third., Material and Methods: Sixty-eight root canals of single-rooted teeth were shaped using the BT-Race files (FKG-Dentaire, La-Chaux-de-Fonds, Switzerland). Ca(OH)2 was placed in all samples except for the negative control group (n=4). Remaining teeth were randomly divided into three groups: G1-Xp (n=30), G2-PUI (n=30) and the positive control group (n=4). Removal procedure consisted of three repeated one-minute-cycles. Samples were split longitudinally, photos of halves were taken at X6.4 magnification and were analyzed using the ImageJ-Software (The National Institutes of Health NIH, Bethesda, Maryland, USA) to calculate the percentage of surfaces with residual Ca(OH)2; the results were compared using the Wilcoxon-Mann Whitney test. Photos of the apical thirds were taken at X16 and X40 magnifications and were scored by two examiners from (0) to (4). Scores of the apical third were compared using the Fisher test., Results: The Xp-endo Finisher removed completely the Ca(OH)2 dressing from four teeth (13.33%) whereas the PUI in one tooth (3.33%). The mean values of the remaining Ca(OH)2 were (2.1%, 3.6%) respectively and the difference was not significant ( p = 0.195). Both examiners found the Xp-endo Finisher more efficient in the apical third and the difference was significant; p = (0.025, 0.047) respectively., Conclusions: The Xp-endo Finisher showed a superiority over the PUI in removing the Ca(OH)2 from the apical third after 3 minutes of activation. Key words: Calcium hydroxide removal, Passive ultrasonic irrigation, Xp-endo Finisher., Competing Interests: Conflict of interest statement:This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors All authors have contributed significantly and are in agreement with the content of the manuscript. This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors. The authors deny any conflict of interest.