593 results on '"Karimipour, Arash"'
Search Results
2. Developing a Novel Hybrid Nanofluid Preparation Method Using the Droplet Generation Method: Predicting the Thermal Conductivity, Viscosity, and Magnetic Properties Compared to the Conventional Two-Step Method
3. Experimental Study to Improve the Hydrodynamic and Thermal Efficiencies of a Cross-Flow Car Radiator Using a New Prepared Hybrid Nanofluid Composed of Graphene Oxide and Silicon Oxide Nanoparticles Dispersed in Water–Ethylene Glycol Fluid
4. New structure for better thermal resistance of building with phase change material: Response to milder thermal change than common walls
5. Simulating non-Newtonian fluid free convection heat transfer through the meshless method
6. Correction: Investigation of free convection heat transfer and entropy generation of nanofluid flow inside a cavity affected by magnetic field and thermal radiation
7. The effects of graphene oxide nanoparticles on the mechanical and thermal properties of polyurethane/polycaprolactone nanocomposites; a molecular dynamics approach
8. Investigating the effects of chitosan atomic ratio and drug type on mechanical properties of silica aerogel/chitosan nanocomposites using molecular dynamics approach
9. Investigation the effect of dissimilar laser welding parameters on temperature field, mechanical properties and fusion zone microstructure of inconel 600 and duplex 2205 stainless steel via response surface methodology
10. Application extension of the meshless local Petrov-Galerkin method: Non-Newtonian fluid flow implementations
11. The effect of external heat flux on the phase change materials composed of two phase water/PCM-graphene nanofluid in a copper nanochannel
12. Numerical investigation of two-phase Al2O3 nanofluid in a microchannel equipped with bump through slip flow
13. Investigation on the size and percentage effects of magnesium nanoparticles on thermophysical properties of reinforced calcium phosphate bone cement by molecular dynamic simulation
14. The thermal performance and mechanical stability of methacrylic acid porous hydrogels in an aqueous medium at different initial temperatures and hydrogel volume fraction using the molecular dynamics simulation
15. Computational thermal performance analysis by LBM for cooling a hot oval object via magnetohydrodynamics non-Newtonian free convection by using magneto-ferrofluid
16. Simulation of nanofluid flow in a solar panel cooling system to investigate the panel's electrical-thermal efficiency with artificial neural network
17. The effects of atomic percentage and size of Zinc nanoparticles, and atomic porosity on thermal and mechanical properties of reinforced calcium phosphate cement by molecular dynamics simulation
18. Analysis of the Non-Newtonian Behavior and Viscosity of GNSs-CuO/Liquid EG Hybrid Nanofluid: An Experimental and Feed-Forward ANN Study
19. Experimental Study of Pool Boiling Heat Transfer Coefficient for DI-Water-Based Nanofluids Containing Nickel Oxide in a Constant Magnetic Field
20. Phase change process in a porous Carbon-Paraffin matrix with different volume fractions of copper oxide Nanoparticles: A molecular dynamics study
21. Fabrication and characterization of synthesized hydroxyapatite/ethanolamine for bone tissue engineering application
22. Effect of lithium-ion batteries on heating a residential building using PCM: Changing the horizontal distance between batteries
23. Reducing electricity demand by integrating a sustainable pack into HVAC- adding PCM in sustainable pack as well as building envelopes
24. Thermal analysis of battery cells placed in triangular enclosures filled with PCM in the presence of forced airflow in an air duct
25. Using PCM for building energy management to postpone the electricity demand peak load and approving a new PID controller to activate alternative chiller
26. Numerical and experimental study of thermal efficiency of a spiral flat plate solar collector by changing the spiral diameter, flow rate, and pipe diameter
27. Introducing a new PID controller to control the addition of PCM to the building with ventilation heat recovery installation to reduce the energy demand of the cooling system
28. Using proportional-integral-derivative controllers and PCM and a new design of building air intake with five scenarios to present a multi-zone CAV-AHU for tackling high energy consumption
29. Thermal systems energy optimization employing two independent circuits of double vertical ground U-tube with PCM as the backfill material for building
30. Fabrication and characterization of nanocrystalline hydroxyapatite reinforced with silica-magnetite nanoparticles with proper thermal conductivity
31. Atomic coatings effects on the combustion of aluminium hydride nanoparticles dispersed in liquid oxygen: Molecular dynamics simulation for the oxygenated environments
32. Numerical study of the cooling effect of a PVT on its thermal and electrical efficiency using a Cu tube of different diameters and lengths
33. The effects of initial temperature and pressure on the mechanical properties of reinforced calcium phosphate cement with magnesium nanoparticles: A molecular dynamics approach
34. Effects of various temperature and pressure initial conditions to predict the thermal conductivity and phase alteration duration of water based carbon hybrid nanofluids via MD approach
35. Examining the effects of interior setpoint temperature on phase change materials usefulness through a performing annual analysis in the air handling units: A building energy management study
36. Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge
37. The Molecular Dynamics study of atomic structure behavior of LL-37 peptide as the antimicrobial agent, derived from the human cathelicidin, inside a nano domain filled by the aqueous environment
38. The investigation of Fe3O4 atomic aggregation in a nanochannel in the presence of magnetic field: Effects of nanoparticles distance center of mass, temperature and total energy via molecular dynamics approach
39. Water molecules adsorption by a porous carbon matrix in the presence of NaCl impurities using molecular dynamic simulation
40. Molecular dynamics method to investigate the effect of variable electric field on the first charge of Li-Ion Nanobattery with carbon anode.
41. The effect of sedimentation phenomenon of the additives silver nano particles on water pool boiling heat transfer coefficient: A comprehensive experimental study
42. Experimental and numerical model for mechanical properties of concrete containing fly ash: Systematic review
43. Phase change material dependency on solar power plant building through examination of energy-saving
44. An experimental study on the cooling efficiency of magnetite–water nanofluid in a twisted tube exposed to a rotating magnetic field
45. Water–copper nanofluid flow in flat and ribbed microchannels: numerical modeling and optimization
46. A thorough study on the effect of red mud, granite, limestone and marble slurry powder on the strengths of steel fibres-reinforced self-consolidation concrete: Experimental and numerical prediction
47. Improve the efficiency and heat transfer rate’ trend prediction of a flat-plate solar collector via a solar energy installation by examine the Titanium Dioxide/Silicon Dioxide-water nanofluid
48. Improve thermal performance of Simulated-Body-Fluid as a solution with an ion concentration close to human blood plasma, by additive Zinc Oxide and its composites: ZnO/Carbon Nanotube and ZnO/Hydroxyapatite
49. Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation
50. The investigation of energy management and atomic interaction between coronavirus structure in the vicinity of aqueous environment of H2O molecules via molecular dynamics approach
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.