Search

Multi-component polymer nanomaterials have attracted great attention because of their applications in areas such as biomedicine, tissue engineering, and organic solar cells. The precise control over the morphologies of multi-component polymer nanomaterials, however, is still a great challenge. In this work, the fabrication of poly(methyl methacrylate)(PMMA)/poly­styrene (PS) nanostructures that contain PMMA shells and encapsulated PS nanospheres is studied. The nanostructures are prepared using a triple solution wetting method with anodic aluminum oxide (AAO) templates. The nanopores of the templates are wetted sequentially by PS solutions in dimethylformamide (DMF), PMMA solutions in acetic acid, and water. The compositions and morphologies of the nanostructures are controlled by the interactions between the polymers, solvents, and AAO walls. This work not only presents a feasible method to prepare multi-component polymer nanomaterials, but also leads to a better understanding of polymer-solvent interactions in confined geometries. [ABSTRACT FROM AUTHOR]

Back Cover: The fabrication of poly(methyl methacrylate) (PMMA)/polystyrene (PS) nanostructures that contain PMMA shells and encapsulated PS nanospheres is studied. The nanostructures are prepared using a triple solution wetting method with anodic aluminum oxide (AAO) templates. The shape of the prepared nanostructures is similar to that of a candied gourd, a traditional Chinese snack prepared by coating tomatoes skewered on a wood stick with sugar. Further details can be found in the article by H.‐W. Ko, M.‐H. Chi, C.‐W. Chang, C.‐H. Su, T.‐H. Wei, C.‐C. Tsai, C.‐H. Peng, and J.‐T. Chen* on page 439. [ABSTRACT FROM AUTHOR]

Block copolymers have attracted great attention because of their abilities to self-assemble into well-ordered microphase-separated structures. To generate nanopatterns of block copolymers with long-range ordering and low-defect densities in shorter time scales, microwave annealing has recently been applied. Microwave annealing, however, has so far only been used for block copolymer bulks and thin films. In this work, we discover that microwave annealing can be successfully applied to three-dimensional block copolymer nanostructures by studying the infiltration and microphase separation of block copolymers in cylindrical nanopores upon microwave irradiation. Cylinder-forming and lamella-forming poly(styrene-block-dimethylsiloxane) (PS-b-PDMS) are introduced into the nanopores of anodic aluminum oxide (AAO) templates. In addition, AAO templates with different pore sizes are used to study the effect of the commensurabilities between the pore diameters and the repeating periods of the block copolymers on the morphologies of the block copolymer nanostructures.

The microphase separation of block copolymers in confined geometries has been widely investigated over the last few decades. The controllability and versatility of the confinement-induced morphologies, however, are still difficult to be achieved because of the limited experimental parameters in the process of fabricating the confined nanostructures. In this work, we study the morphology transitions of lamellae-forming polystyrene-block-polydimethylsiloxane (PS-b-PDMS) nanorods confined in the nanopores of anodic aluminum oxide (AAO) templates. The nanorods are formed by solvent-assisted template wetting, and the morphologies are compared to those in the bulk state. By blending PS-b-PDMS with homopolystyrene (hPS), the morphologies of the nanorods can be controlled because of the changes of the effective volume fractions. Special morphology transitions from concentric lamellar morphology, to multihelical morphology, and finally to spherical-like morphology are observed by increasing the weight ratios of hPS. hPS with different molecular weights is also applied to investigate the effect of hPS on the morphologies of the PS-b-PDMS/hPS blend nanostructures. The unusual morphologies are further confirmed by a selective removal process, which also generates nanochannels for possible refilling with functional materials.

We demonstrate a novel wetting method to prepare hierarchical polymer films with polymer nanotubes on selective regions. This strategy is based on the selective wetting abilities of polymer chains, annealed in different solvent vapors, into the nanopores of porous templates. Phase-separated films of polystyrene (PS) and poly(methyl methacrylate) (PMMA), two commonly used polymers, are prepared as a model system. After anodic aluminum oxide (AAO) templates are placed on the films, the samples are annealed in vapors of acetic acid, in which the PMMA chains are swollen and wet the nanopores of the AAO templates selectively. As a result, hierarchical polymer films containing PMMA nanotubes can be obtained after the AAO templates are removed. The distribution of the PMMA nanotubes of the hierarchical polymer films can also be controlled by changing the compositions of the polymer blends. This work not only presents a novel method to fabricate hierarchical polymer films with polymer nanotubes on selective regions, but also gives a deeper understanding in the selective wetting ability of polymer chains in solvent vapors.

Spherical core-shell structures have been widely investigated in recent years, and they can be used for various applications, such as drug delivery, biological labeling, and batteries. Although many methods have been developed to prepare core-shell structures, it is still a great challenge to fabricate core-shell structures in the nanoscale with well-controlled morphologies and sizes. In this work, we present a simple method to fabricate core-shell polymer nanospheres consisting of polystyrene (PS) cores and poly(methyl methacrylate) (PMMA) shells. The nanostructures are prepared by a solution-based template wetting method. After the nanopores of anodic aluminum oxide (AAO) templates are wetted sequentially by PS/PMMA blend solutions and water, the core-shell nanostructures can be formed. The formation process is related to the Rayleigh-instability-type transformation. Selective removal techniques are also used to confirm the morphologies of the core-shell nanostructures.