Search

Industrial wireless control systems are mainly designed on the premise of time-sensitive ultra-reliable low-latency communications (URLLC). With the introduction of survival time to the quality of service requirements of such systems, the design paradigm has evolved from typical link reliability (i.e., minimizing packet error rate), to service availability, that is, minimizing the chance of burst errors, which can cause loss of communication for longer than survival time. In this article, we address the implications of this evolution and present a set of survival time strategies that are designed to guarantee end-to-end dependable industrial wireless control. To ensure service availability, transmissions are divided into normal and survival modes. The presented strategies include scheduling and link adaptation that are designed to target the differences between these modes of operation, traffic prioritization to enhance service availability for users in survival mode, and more efficient multi-node, multi-path, and multi-carrier communications techniques. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel nonlinear digital self-interference canceller algorithm, its implementation details on a software-defined radio (SDR) platform, and performance results of real-time full-duplex experiments on both device and link level. The canceller algorithm is based on an augmented Hammerstein model, with a nonlinear part modeling the transmitter non-idealities followed by a linear filter to model the self-interference (SI) channel. The nonlinear part includes a spline-based model for the nonlinear power amplifier, a polynomial model for baseband nonlinearities, as well as models for I/Q mismatch and LO leakage. The canceller is implemented on an FPGA as a part of an OFDM transceiver testbed for real-time measurements. Extensive real-time measurements show excellent performance: (1) the digital canceller, together with an RF isolator, can suppress the SI to within 1–2 dB’s of the receiver noise floor, with total SI suppression of up to 103 dB; (2) digital cancellation of up to 46 dB is evidenced, which is among the highest real-time cancellations in literature; (3) system-level measurements with OFDM signals demonstrate the benefit of utilizing the proposed canceller in a two-way communication scenario, showing up to 90 % increase in sum-rate compared to half-duplex communication. [ABSTRACT FROM AUTHOR]

In this paper, we present a class of cascaded nonlinear models for complex-valued system identification, aimed at baseband modeling of nonlinear radio systems. The proposed models consist of serially connected elementary linear and nonlinear blocks, with the nonlinear blocks implemented as uniform spline-interpolated look-up tables (LUT) and the linear blocks as FIR filters. Wiener, Hammerstein, and Wiener-Hammerstein models are built, and simple but efficient gradient based adaptive learning rules are derived for all the models. This approach leads to remarkably simple solutions in terms of computational complexity, making the techniques suitable for real-time implementation. The proposed methods are then applied to full-duplex self-interference cancellation and digital predistortion in various real-life scenarios. First, evaluations with measured data from an in-band full-duplex prototype working at 2.4 GHz ISM band show that the algorithms are capable of obtaining similar cancellation performance as existing state-of-the-art solutions, regardless of the clearly reduced complexity. Second, a mmW active antenna array working at 28 GHz center frequency is digitally predistorted with the proposed solutions. The unwanted emissions and nonlinear distortion are suppressed to similar levels as with other state-of-the art solutions, and the corresponding linearity specifications are fulfilled in all cases, while the processing complexity is again drastically reduced. [ABSTRACT FROM AUTHOR]

As low Earth orbit (LEO) satellite communication systems are gaining increasing popularity, new theoretical methodologies are required to investigate such networks’ performance at large. This is because deterministic and location-based models that have previously been applied to analyze satellite systems are typically restricted to support simulations only. In this paper, we derive analytical expressions for the downlink coverage probability and average data rate of generic LEO networks, regardless of the actual satellites’ locality and their service area geometry. Our solution stems from stochastic geometry, which abstracts the generic networks into uniform binomial point processes. Applying the proposed model, we then study the performance of the networks as a function of key constellation design parameters. Finally, to fit the theoretical modeling more precisely to real deterministic constellations, we introduce the effective number of satellites as a parameter to compensate for the practical uneven distribution of satellites on different latitudes. In addition to deriving exact network performance metrics, the study reveals several guidelines for selecting the design parameters for future massive LEO constellations, e.g., the number of frequency channels and altitude. [ABSTRACT FROM AUTHOR]

We analyze an inband full-duplex access node that is serving mobile users while simultaneously connecting to a core network over a wireless backhaul link, utilizing the same frequency band for all communication tasks. Such wireless self-backhauling is an intriguing option for the next generation wireless systems since a wired backhaul connection might not be economically viable if the access nodes are deployed densely. In particular, we derive the optimal transmit power allocation for such a system in closed form under quality-of-service (QoS) requirements, which are defined in terms of the minimum data rates for each mobile user. For comparison, the optimal transmit power allocation is solved also for two reference scenarios: a purely half-duplex access node, and a relay-type full-duplex access node. Based on the obtained expressions for the optimal transmit powers, we then show that the systems utilizing a full-duplex capable access node have a fundamental feasibility boundary, meaning that there are circumstances under which the QoS requirements cannot be fulfilled using finite transmit powers. This fundamental feasibility boundary is also derived in closed form. The feasibility boundaries and optimal transmit powers are then numerically evaluated in order to compare the different communication schemes. In general, utilizing the purely full-duplex access node results in the lowest transmit powers for all the communicating parties, although there are some network geometries under which such a system is not capable of reaching the required minimum data rates. In addition, the numerical results indicate that a full-duplex capable access node is best suited for relatively small cells. [ABSTRACT FROM AUTHOR]

This paper proposes an active radio frequency (RF) cancellation solution to suppress the transmitter (TX) passband leakage signal in radio transceivers supporting simultaneous transmission and reception. The proposed technique is based on creating an opposite-phase baseband equivalent replica of the TX leakage signal in the transceiver digital front-end through adaptive nonlinear filtering of the known transmit data, to facilitate highly accurate cancellation under a nonlinear power amplifier (PA). The active RF cancellation is then accomplished by employing an auxiliary TX chain to generate the actual RF cancellation signal, and combining it with the received signal at the receiver (RX) low-noise amplifier (LNA) input. A closed-loop parameter learning approach, based on the decorrelation learning rule, is also developed to efficiently estimate the coefficients of the nonlinear cancellation filter in the presence of a nonlinear PA with memory, finite passive isolation, and a nonlinear LNA. The performance of the proposed cancellation technique is evaluated through comprehensive RF measurements adopting commercial LTE-Advanced transceiver hardware components. The results show that the proposed technique can provide an additional suppression of up to 54 dB for the TX passband leakage signal at the LNA input, even at very high transmit power levels and with wide transmission bandwidths. Such a novel cancellation solution can, therefore, substantially improve the TX–RX isolation, hence reducing the requirements on passive isolation and RF component linearity, as well as increasing the efficiency and flexibility of the RF spectrum use in the emerging 5G radio networks. [ABSTRACT FROM PUBLISHER]

Inband FD operation has great potential in civilian/commercial wireless communications, because it can as much as double transmission links? spectral efficiency by exploiting the newfound capability for STAR that is facilitated by advanced SIC techniques. This article surveys the prospects of exploiting the emerging FD radio technology in military communication applications as well. In addition to enabling high-rate twoway tactical communications, the STAR capability could give a major technical advantage to armed forces by allowing their radio transceivers to conduct electronic warfare at the same time that they are also receiving or transmitting other signals at the same frequency bands. After comprehensively introducing FD transceiver architectures and SIC requirements in military communications, this article outlines and analyzes all the most promising defensive and offensive applications of the STAR capability. It is not out of the question that this disruptive technology could even bring about a paradigm shift in operations at the cyber-electromagnetic battleground. At least, forward-looking innovators in the military communications community would right now have a window of opportunity to engage in original, potentially high-impact scientific research on FD military radio systems, which we would like to spur on by this speculative tutorial article. [ABSTRACT FROM AUTHOR]

In this communication, the self-interference (SI) channel and the novel enabling techniques for a compact inband full-duplex relay are described and characterized in different operating environments. The full-duplex operation is based on a novel antenna design that uses wavetraps to provide passive isolation of up to 70 dB between the transmit and receive antenna ports. The passive isolation is complemented with novel active RF and digital cancellation stages that further suppress the residual SI to the receiver noise floor. Measurement results of a complete prototype implementation show that the proposed design can achieve an overall SI cancellation performance of over 100 dB even with an ambitious instantaneous bandwidth of 80 MHz. Similar results are obtained both in an anechoic chamber as well as in realistic multipath indoor environments. [ABSTRACT FROM PUBLISHER]

In this article, we address the challenges of transmitter-receiver isolation in mobile full-duplex devices, building on shared-antenna-based transceiver architecture. First, self-adaptive analog RF cancellation circuitry is required, since the ability to track time-varying self-interference coupling characteristics is of utmost importance in mobile devices. In addition, novel adaptive nonlinear DSP methods are also required for final self-interference suppression at digital baseband, since mobile-scale devices typically operate under highly nonlinear low-cost RF components. In addition to describing the above kind of advanced circuit and signal processing solutions, comprehensive RF measurement results from a complete demonstrator implementation are also provided, evidencing beyond 40 dB of active RF cancellation over an 80 MHz waveform bandwidth with a highly nonlinear transmitter power amplifier. Measured examples also demonstrate the good self-healing characteristics of the developed control loop against fast changes in the coupling channel. Furthermore, when complemented by nonlinear digital cancellation processing, the residual self-interference level is pushed down to the noise floor of the demonstration system, despite the harsh nonlinear nature of the self-interference. These findings indicate that deploying the full-duplex principle can indeed also be feasible in mobile devices, and thus be one potential technology in, for example, 5G and beyond radio systems. [ABSTRACT FROM PUBLISHER]

In-band full-duplex relays transmit and receive simultaneously at the same center frequency, hence offering enhanced spectral efficiency for relay deployment. In order to deploy such full-duplex relays, it is necessary to efficiently mitigate the inherent self-interference stemming from the strong transmit signal coupling to the sensitive receive chain. In this article, we present novel state-of-the-art antenna solutions as well as digital self-interference cancellation algorithms for compact MIMO fullduplex relays, specifically targeted for reduced-cost deployments in local area networks. The presented antenna design builds on resonant wavetraps and is shown to provide passive isolations on the order of 60?70 dB. We also discuss and present advanced digital cancellation solutions, beyond classical linear processing, specifically tailored against nonlinear distortion of the power amplifier when operating close to saturation. Measured results from a complete demonstrator system, integrating antennas, RF cancellation, and nonlinear digital cancellation, are also presented, evidencing close to 100 dB of overall self-interference suppression. The reported results indicate that building and deploying compact full-duplex MIMO relays is already technologically feasible. [ABSTRACT FROM PUBLISHER]

This paper addresses the modeling and cancellation of self-interference in full-duplex direct-conversion radio transceivers, operating under practical imperfect radio frequency (RF) components. First, detailed self-interference signal modeling is carried out, taking into account the most important RF imperfections, namely, transmitter power amplifier nonlinear distortion as well as transmitter and receiver IQ mixer amplitude and phase imbalances. The analysis shows that after realistic antenna isolation and RF cancellation, the dominant self-interference waveform at the receiver digital baseband can be modeled through a widely linear transformation of the original transmit data, opposed to classical purely linear models. Such widely linear self-interference waveform is physically stemming from the transmitter and receiver IQ imaging and cannot be efficiently suppressed by classical linear digital cancellation. Motivated by this, novel widely linear digital self-interference cancellation processing is then proposed and formulated, combined with efficient parameter estimation methods. Extensive simulation results demonstrate that the proposed widely linear cancellation processing clearly outperforms the existing linear solutions, hence enabling the use of practical low-cost RF front ends utilizing IQ mixing in full-duplex transceivers. [ABSTRACT FROM PUBLISHER]

Despite the intensive recent research on wireless single-channel full-duplex communications, relatively little is known about the transceiver chain nonidealities of full-duplex devices. In this paper, the effect of nonlinear distortion occurring in the transmitter power amplifier (PA) and the receiver chain is analyzed, beside the dynamic range requirements of analog-to-digital converters (ADCs). This is done with detailed system calculations, which combine the properties of the individual electronics components to jointly model the complete transceiver chain, including self-interference cancellation. They also quantify the decrease in the dynamic range for the signal of interest caused by self-interference at the analog-to-digital interface. Using these system calculations, we provide comprehensive numerical results for typical transceiver parameters. The analytical results are also confirmed with full waveform simulations. We observe that the nonlinear distortion produced by the transmitter PA is a significant issue in a full-duplex transceiver and, when using cheaper and less linear components, also the receiver chain nonlinearities become considerable. It is also shown that, with digitally intensive self-interference cancellation, the quantization noise of the ADCs is another significant problem. [ABSTRACT FROM PUBLISHER]

This paper addresses the analysis of oscillator phase-noise effects on the self-interference cancellation capability of full-duplex direct-conversion radio transceivers. Closed-form solutions are derived for the power of the residual self-interference stemming from phase noise in two alternative cases of having either independent oscillators or the same oscillator at the transmitter and receiver chains of the full-duplex transceiver. The results show that phase noise has a severe effect on self-interference cancellation in both of the considered cases, and that by using the common oscillator in upconversion and downconversion results in clearly lower residual self-interference levels. The results also show that it is in general vital to use high quality oscillators in full-duplex transceivers, or have some means for phase noise estimation and mitigation in order to suppress its effects. One of the main findings is that in practical scenarios the subcarrier-wise phase-noise spread of the multipath components of the self-interference channel causes most of the residual phase-noise effect when high amounts of self-interference cancellation is desired. [ABSTRACT FROM PUBLISHER]