Search

The significance of pork meat quality extends far beyond mere consumer satisfaction, encompassing crucial aspects such as health and nutrition, economic impact, reputation and branding, food safety, and sustainability within the global food system. Influenced by a multitude of factors, each playing a pivotal role in shaping its sensory attributes and consumer appeal, pork meat quality stands as a cornerstone of the meat industry. Thus, understanding these factors are imperative for ensuring consistent high-quality pork production, aligning with consumer preferences, and elevating overall satisfaction levels. In this review, we provide a comprehensive overview of the diverse factors affecting pork meat quality, including genetic characteristics, rearing systems, feed composition, gender differences, pre-slaughter handling, and meat aging processes.

This study aimed to confirm the applicability of the new nitrogen (N2) gas stunning method in the broiler slaughtering process by comparing the meat and small intestine quality following different stunning methods (electrical, carbon dioxide (CO2), N2, and halal). Four treatments were compared: (i) electrical stunning (Elec), (ii) 80% CO2 gas stunning (CO2-gas), (iii) 98% N2 gas stunning (N2-gas), and (iv) the non-stunning method (halal). N2 gas stunning (98%) and the halal method were conducted at the pilot plant abattoir of the national institute of animal science, Korea, and electrical and 80% CO2 stunning were performed on the nearest commercial slaughter house. Meat pH24h, color (lightness, redness and yellowness), proximate composition, water holding capacity (WHC), cooking loss, and Warner-Bratzler shear force (WBSF) were measured, and in the small intestine, pH24h, color, thickness, and WBSF were measured. The Elec treatment showed high lightness, yellowness, and low redness in both meat and the small intestine, indicated by a pale color; the CO2-gas treatment showed high redness, low lightness, and low yellowness, and the coloration of meat from the N2-gas treatment was intermediate between Elec and CO2-gas. For other quality traits, the N2-gas showed good results and was between Elec and CO2-gas. Additionally, severe stress (low pH in both meats), low WHC in meat, and cracked small intestine with numerous apertures were observed in the CO2-gas, and pale colored hemorrhagic breast meat was found in the Elec. Therefore, in view of animal welfare and quality traits of meat and the small intestine, 98% N2 gas can be considered in broiler stunning.

Objective Beef of Jeju black cattle (JBC) is considered as a healthy meat type due to its significantly higher unsaturated fatty acids (UFA). Lipid (e.g., UFA) is highly susceptible to oxidizing agents, which results in the quality deterioration and economic value loss of meat products. Therefore, development and application of novel preservative techniques is necessary to improve the shelf-life stability of high-UFA beef. The objective of this study was to assess the applicability of chitosan-based coatings in preservation of JBC beef. Methods Different coating solutions: 2% chitosan alone, and 2% chitosan containing 0.1% or 0.3% gallic acid were prepared to investigate their applicability in preservation of fresh beef during storage. Jeju black cattle beef (2-cm thick steaks) were non-coated (control) or coated with the above coating solutions, placed on trays, over-wrapped with plastic film and stored at 4°C. The microbiological indices, color, total volatile basic nitrogen (TVBN) and lipid oxidation of the beef were investigated after 1, 10, and 21 days of storage. Results Coating with 2% chitosan alone reduced the spoilage bacteria count, TVBN and thiobarbituric acid reactive substances levels in the beef compared with control during storage (p

Objective For decades, LYD ([Landrace×Yorkshire] ♀×Duroc ♂) pigs are the most commonly-used commercial breed for meat production in Korea. Recently, due to the increasing demand for premium pork, the National Institute of Animal Science (Korea) has synthesized a novel pig breed named Woori Heukdon (WHD). This study aimed at comparing the carcass traits, meat yield and quality characteristics between the LYD and WHD pigs under identical rearing condition. Methods The WHD and LYD pigs (n = 15 each) were reared under identical conditions and fed the same commercial diet until reaching recommended market weight (100 to 120 kg). After slaughter, the carcasses were evaluated for traits and meat yield, and the meat quality was assessed on shoulder butt and belly cuts. Results Although no significant differences (p>0.05) occurred in slaughter weight between two pig types, WHD had a lower meat yield (by about 6 kg corresponding to approximately 7%) compared to the LYD pigs (p

The objective of this study was to elucidate the effect of cattle breed on carcass and meat chemical composition, fatty acid profiles, and lipid-metabolism-related genes. For this study, same-age Hanwoo and Chikso steers (n = 6 per breed) reared under identical conditions were used. Immediately after slaughter, muscle tissues were collected for analysis of mRNA expression. At 24 h post-mortem, the carcasses were assessed for carcass traits (marbling score, meat yield, etc.), and meat quality and fatty acid profiles in the longissimus lumborum (LL) and semimembranosus (SM) muscles. The results showed that no differences in the slaughter weight, dressing rate, back-fat thickness, trimmed fat, and total meat yield occurred between the two breeds (p > 0.05). However, Hanwoo cattle had a higher marbling score, intramuscular fat (IMF) content, and expression level of lipid-metabolism-related genes such as lipoprotein lipase, peroxisome proliferator-activated receptor gamma, and fatty acid binding protein 4, compared with Chikso (p < 0.05). Contrastingly, Chikso had a higher total unsaturated fatty acid content and expression level of stearoyl CoA desaturase 1 (p < 0.05). It may be said that the difference in the expression levels of lipid-metabolism-related genes could be the molecular factors underlying IMF deposition and fatty acid profile differences in the beef from the two breeds.

Objective For improving meat quality especially tenderness, male cattle are usually castrated to removes both the testicles. This study was conducted to evaluate the effect castration method (half- and complete-castration) on meat yield and quality characteristics of Hanwoo male cattle. Methods Thirty-two similar age (5.9 months) Hanwoo male calves were divided into: half-castration (HC) and complete-castration (CC) groups (n = 16 per group). At 7 months of age, all the animals were castrated in which the HC calves had only one testicle surgically removed while, the CC calves had both testicles surgically removed. The castrated animals were reared under identical conditions until 25 months of age. After slaughter, the carcasses were evaluated for carcass traits and meat yield of primal cuts. For examination of the castration effect on meat quality, L. lumborum and semimembranosus muscles were used. The meat samples were analyzed for chemical composition, color, pH, shear force and water holding capacity, fatty acids, metabolites and volatile aroma compounds. Results The HC group showed higher meat yields of all primal cuts (p0.05). The meat from HC animals exhibited higher amount of free amino acids associated with sweetness (p< 0.05). Furthermore, the castration method only exhibited a negligible effect on metabolites and volatile aroma compounds in the cooked meat. Conclusion Half-castration emerged as an alternative practice to be used for increasing the yield and tenderness of male cattle meat.

Objective In most retail centers, primal pork cuts for sale are usually prepared into retail-ready slices and overwrapped with air-permeable plastic film. Also, meat of Korean native black pig (KNP) is reputed for its superior quality, however, its shelf life during retail display has not been studied. Thus, the objective of this study was to evaluate shelf life of prepackaged retail-ready KNP belly and shoulder butt slices during refrigerated display. Methods Bellies and shoulder butt obtained at 24 h post-mortem from finishing KNP were used. Each belly or shoulder butt was manually cut into 1.5 cm-thick slices. The slices in each cut type were randomly taken and placed on white foam tray (2 slices/tray) overwrapped with polyvinyl chloride film. The retail-ready packages were then placed in a retail display cabinet at 4°C. Shelf life and sensory quality of the samples were evaluated on day 1, 3, 6, 9, 12, and 15 of display. Results The shoulder butt reached the upper limit (20 mg/100 g) of volatile basic nitrogen for fresh meat after 9 days while, the belly remained within this limit throughout the display time (15 days). Both the cuts reached a thiobarbituric acid reactive substances level of above 0.5 mg malondialdehyde/kg after 9 days. The a* (redness) values remained unchanged during first 9 days in both cuts (p>0.05). After 9 days, off-flavor was not found in either cut, but higher off-flavor intensity was found in shoulder butt after 12 days. The shoulder butt was unacceptable for overall eating quality after 12 days while, belly still was acceptable after 12 days. Conclusion The belly showed a longer shelf life compared to the shoulder butt, and a shelf life of 9 and 12 days is recommended for the prepackaged retail-ready KNP shoulder butt and belly slices, respectively.

Objective Pork belly is considered as the most commercially important and preferable primal cut by consumers worldwide. Thus, this study was conducted to determine the effects of fat levels on the meat quality characteristics of pork bellies. Methods Seventy-eight growing-finishing pigs collected from different commercial pig farms were slaughtered and used in the present study. After slaughter 24 h, bellies were fabricated according to the Korean Pork Cutting Specification, and immediately sampled for analysis of their fat content. Based on the fat levels, the bellies were segregated into three different groups: low fat (LF, fat ≤20%, n = 15), medium fat (MF, fat 21% to 30%, n = 30), and high fat (HF, fat ≥31%, n = 33). The bellies were then analyzed for meat quality traits, fatty acids, flavor compounds and eating quality properties. Results The HF group had lower moisture and cooking loss levels compared to the other groups (p

Objective This study was conducted to evaluate the correlation between body size traits, carcass traits, and primal cuts in Hanwoo steers. Methods Sixty-one beef carcasses were classified for conformation and primal cut weight. Additionally, carcass weight, fat thickness, carcass dimensions, and longissimus muscle area were determined to complement the grading. Results The average live weight and cold carcass weight were 759 and 469 kg, respectively. The mean carcass meat, fat, and bone proportions were 551, 298, and 151 g/kg, respectively. Primal cuts weights showed significant positive correlations (p

Objective This study was conducted to determine the composition and diversity of the fungal flora at various control points in cheese ripening rooms of 10 dairy farms from six different provinces in the Republic of Korea. Methods Floor, wall, cheese board, room air, cheese rind and core were sampled from cheese ripening rooms of ten different dairy farms. The molds were enumerated using YM petrifilm, while isolation was done on yeast extract glucose chloramphenicol agar plates. Morphologically distinct isolates were identified using sequencing of internal transcribed spacer region. Results The fungal counts in 8 out of 10 dairy farms were out of acceptable range, as per hazard analysis critical control point regulation. A total of 986 fungal isolates identified and assigned to the phyla Ascomycota (14 genera) and Basidiomycota (3 genera). Of these Penicillium, Aspergillus, and Cladosporium were the most diverse and predominant. The cheese ripening rooms was overrepresented in 9 farms by Penicillium (76%), while Aspergillus in a single farm. Among 39 species, the prominent members were Penicillium commune, P. oxalicum, P. echinulatum, and Aspergillus versicolor. Most of the mold species detected on surfaces were the same found in the indoor air of cheese ripening rooms. Conclusion The environment of cheese ripening rooms persuades a favourable niche for mold growth. The fungal diversity in the dairy farms were greatly influenced by several factors (exterior atmosphere, working personnel etc.,) and their proportion varied from one to another. Proper management of hygienic and production practices and air filtration system would be effective to eradicate contamination in cheese processing industries.

Objective Although the slaughter of cull sows (CS) for human consumption and meat products processing appears quite common throughout the world, relatively limited scientific information regarding the meat quality parameters of this pork type is available. The present study aimed at providing the technological quality characteristics and eating quality of CS meat, and comparing with those of commercial pork. Methods Longissimus thoracis et lumborum muscle samples of CS and finisher pigs (FP) at 24 h postmortem were collected and used for investigation of the meat quality traits (pH, color, shear force, cooking loss, water holding capacity), fatty acids, flavor compounds and sensory characteristics. Results The CS meat had significantly higher moisture content (p = 0.0312) and water holding capacity (p = 0.0213) together with lower cooking loss (p = 0.0366) compared to the FP meat. The CS meat also exhibited higher (p = 0.0409) contents of unsaturated fatty acids, especially polyunsaturated fatty acids (PUFA, p = 0.0213) and more desirable PUFA/total saturated fatty acids ratio (p = 0.0438) compared to the FP meat. A total of 56 flavor compounds were identified, amongst the amount of 16 compounds differed significantly between the two pork groups. Most of the PUFA-derived flavor compounds (e.g., hexanal, benzaldehyde, and hydrocarbons) showed higher amounts in the CS meat. While, 3-(methylthio)-propanal and 4-methylthiazole associated with pleasant aromas (meaty and roast odor notes) were only found in the FP meat. Furthermore, no differences were reported by panelists for flavor, juiciness, tenderness, and acceptability scores between the two pork groups studied. Conclusion The sow meat exhibited better technological quality and its eating quality could be comparable to the commercial pork. This study provides meat processors and traders with valuably scientific information which may help to improve the utilization and consumption level of sow meat.

The aim of this study was to compare the meat quality and taste-and-aroma-related components of beef between breeds. For this purpose, Hanwoo and Chikso steers (n = 7 per breed) raised under identical conditions until 30 months old were used. After 24 h of slaughter, longissimus lumborum (LL) and semimembranosus (SM) muscles were collected and analyzed for technological quality, free amino acids, metabolites, and volatile compounds. The Chikso meat showed lower values for shear force and color traits (lightness, redness, and yellowness) compared to Hanwoo (p < 0.05). The Chikso presented a higher amount of sweetness-related free amino acids (alanine, proline, and threonine) in the LL muscle, while Hanwoo had a higher amount of methionine and glutamine associated with umami taste (p < 0.05). A total of 36 metabolites were identified and quantified in the meat samples; out of them, 7 compounds were affected by breed (p < 0.05). Regarding aroma compounds, a significantly higher amount of fat-derived aldehydes associated with fatty and sweet notes was found in Hanwoo, whereas a higher amount of pyrazines associated with roasty notes was found in Chikso (p < 0.05). Thus, under identical feeding conditions, breed showed a significant effect on the quality and taste-and-aroma-related components that may influence the eating quality of beef between the two breeds studied.

Recently, many slaughterhouses have begun to introduce automation and quality evaluation sensing equipment to the slaughter processing line to overcome insufficient human resources, improve the efficiency of the slaughter process, and standardize meat quality. Various processing instruments and sensing technologies may be used depending on the livestock to be slaughtered, but a standardized process design for a smart slaughterhouse remains to be established. Slaughterhouses are becoming more industrialized, leveraging data collection and analysis to drive growth and increase production. Therefore, slaughterhouse automation is essential for meeting production demand, and an optimized design suitable for the size of each company is required to maximize economical equipment and systems. We introduce robot technology used in the slaughterhouse and detail the visceral laparotomy, carcass preprocessing, and deboning robot technology. In this study, we examine slaughterhouse automation equipment and technologies, focusing on optimizing the processing lines, the direction of application, and the hygiene of robot technique. We hope this review will provide insight into slaughterhouse automation for decision making in the slaughter industry.

The objectives of this study were to elucidate the effect of different high-concentration levels of inert gases (Ar and N2) on heme-pigment solutions and on the color of the blood, meat, and small intestine of rabbits; and to figure out the proper concentration level of inert gas (Ar or N2) for the complete stunning of the rabbit. To observe the changing of color attributes, a research study was conducted in the abattoir of the National Institute of Animal Science (NIAS), RDA, Republic of Korea. This experiment had 2 parts, (i) A trial on heme-pigment solutions (hemoglobin and myoglobin solution) was conducted in a gas chamber with different high-concentration levels of carbon dioxide, argon, nitrogen, and normal air; and (ii) a rabbit experiment was conducted—stunning with different high-concentration levels of carbon dioxide, argon, nitrogen, and the Halal method (non-stunning). A small-size digital gas chamber was used for this experiment (size: width 850 mm × depth 1350 mm). Artificial hemoglobin (Hb) and myoglobin (Mb) solutions were created from “porcine hemoglobin lyophilized powder” and “equine skeletal muscle myoglobin lyophilized powder”, respectively. In the heme-pigment solutions trial, 10 treatments were used: (i) 80% carbon dioxide (T1), (ii) 85% carbon dioxide (T2), (iii) 90% carbon dioxide (T3), (iv) 80% argon (T4), (v) 85% argon (T5), (vi) 90% argon (T6), (vii) 80% nitogen (T7), (viii) 85% nitogen (T8), (ix) 90% nitogen (T9), and (x) normal air (T10). Heme-pigment solutions (both Hb and Mb) were exposed with each treatment for four separate durations of time (30 s, 1 min, 2 min, and 4 min); and every sample (Hb and Mb) was exposed during each duration of time for 10 times (n = 10). In the rabbit experiment, seven treatments were used (i) 85% carbon dioxide (T1), (ii) 90% carbon dioxide (T2), (iii) 85% argon (T3), (iv) 90% argon (T4), (v) 96% nitrogen (T5), (vi) 98% nitogen (T6), and (vii) the Halal method (non-stunning) (T7). Forty-two rabbits (mixed-breed) were collected from the nearest commercial farm and randomly selected for a treatment group (n = 6). The average body weight was 2.3 kg. For stunning, each individual rabbit was separately kept in a gas chamber, after which each specific gas was used to fulfill the desired level in the pit. After reaching the desired level of concentration, rabbits were stunned within a very short time. It was observed that the time required for stunning in the T1, T2, T3, T4, T5 and T6 treatment was 79–82, 68–73, 97–103, 88–91, 164–173, and 108–115 s, respectively. In the case of the Halal method (non-stunning), as per the rules of Islam, rabbits were slaughtered without stunning. After slaughtering, in all treatments, the blood, meat, and small intestine of each animal were collected carefully and kept in a cool room in which the temperature was −2 °C, and after 24 h, the color attributes—lightness (L*), redness (a*), and yellowness (b*)—were measured via a Chroma Meter. It was found that in both experiments (trial on heme-pigment solutions and rabbit stunning), the color values (L*, a* and b*) showed a significant difference (p < 0.05) among the treatment groups. The CO2-treated groups showed high redness (a*) and low lightness (L*) and yellowness (b*), which indicated a dark-red color, and N2-treated groups showed high lightness (L*) and yellowness (b*) and low redness (a*), which implied a bright-red color. The effect of the Ar was in between the CO2- and N2-treated groups. These phenomena were observed both in the heme-pigment solutions (Hb and Mb) and in the blood, meat, and small intestine of the rabbits. N2-stunned animals fulfill the fundamental desire of consumers to purchase bright red-colored fresh meat. Therefore, in view of color attributes, consumer satisfaction, and animal welfare, N2 gas can be thought of as a valuable alternative to stunning. Considering the time required for complete stunning and desirable color attributes, a 98% concentration of N2 is best for rabbit stunning. As such, it could be used as a better option for the gas stunning of animals.

Objective This study identified angiotensin I-converting enzyme (ACE) inhibitory peptides in beef M. longissimus injected with thermolysin (80 ppm) and stored for 3 days at 5°C. Methods Crude peptides (molecular weight

This study aimed to identify angiotensin I-converting enzyme (ACE) inhibitory peptides in enzymatic hydrolysates from pork loin. Pork hydrolysates were produced by injecting different enzymes to the loins as follows: un-injected pork (fresh pork), injected with water (no enzyme control), 100 ppm protease type XIII (E1), 80 ppm thermolysin (E2), and the combination of 100 ppm protease type XIII and 80 ppm thermolysin (E3). The highest degree of hydrolysis (96.7%) and ACE inhibitory activity (90.1%) were observed in the E2-treated hydrolysate. Next, the E2-treated hydrolysate was fractionated and purified by using two different chromatographic methods, and the fractions with the highest ACE inhibitory activity were selected at each step. Finally, two peptides (Leu-Val-Gly-Arg-Pro-Arg-His-Gly-Gln and Val-Phe-Pro-Ser) were identified in the E2-treated hydrolysate using UPLC-QTOF-MS/MS. The smaller peptide, Val-Phe-Pro-Ser, showed a lower IC50 value for ACE inhibitory activity than the nona-peptide and captopril, a commercial ACE inhibitor. The results of this study suggest that the isolated nona-peptide, Leu-Val-Gly-Arg-Pro-Arg-His-Gly-Gln, possessed strong ACE inhibitory activity. Therefore, overnight incubation of fresh pork in a refrigerator after thermolysin injection may make the pork more beneficial for human consumption.

The objective of present study was to investigate the feasibility of utilizing only high concentration of nitrogen gas in the stunning of pigs and its effects on the quality traits of the meat and small intestine.To conduct this experiment, three treatment groups were compared: (i) electric stunning (T1), (ii) CO2 (80%) gas stunning (T2), and (iii) N2 (98%) gas stunning (T3). A total of 21 standard pigs (Landrace × Yorkshire × Duroc; LYD) were collected from a commercial pig farm, randomly selecting seven pigs for each group (body weight of 104.5 to 120.6 kg). For stunning, each individual pig was separately kept in a gas chamber, after which each specific gas was used to fulfill the desired level in the pit. To obtain the desired level of concentration for each gas (N2 at 98% and CO2 at 80%), approximately 80 min and 35 min were required, respectively. It was observed that after reaching the desired level of concentration, pigs were stunned within a very short time (for CO2, 90 s and for N2, 120 s). For electric stunning, standard quality electric devices were used. After slaughtering, the meat and small intestine of each animal was collected separately and kept in a cool room where temperature was −2 °C. In the meat and small intestine, L* (Lightness) and b* (Yellowness) were high (p < 0.05) in the T1 and T3 groups. The T2 group showed high a* (Redness) (p < 0.05) values in both the meat and small intestine. A proximate composition of meat showed no significant differences except moisture. The water holding capacity (WHC), cooking loss (CL), and Warner-Bratzler shear force (WBSF) of meat were lowest in the T2 group, but not at a notable difference compared to T3. In the small intestine, L* (Lightness), a* (Redness), b* (Yellowness), and thickness significantly differed (p < 0.05) in each group, but WBSF showed no significance between the T2 and T3 groups. It is concluded that a high concentration of N2 gas (98%) may be considered in the stunning of pigs, and its effect on meat and small intestine is favorable.

This study evaluated the effects of crust derived from dry-aged beef (Hanwoo cattle) on the quality of pork patties. Pork patty samples were prepared with different amounts of crust (0—control, 1, 2, and 3%). The protein, fat, and ash contents in the crust samples were significantly higher than those in the control sample (p < 0.05). The CIE b* value of uncooked pork patties with crust added was significantly lower than that of the control patties (p < 0.05). The pH and CIE L* values of uncooked patty batter samples decreased with increasing concentrations of crust (p < 0.05). However, the viscosity increased proportionally with an increase in crust (p < 0.05). Samples containing 3% crust showed significantly higher uncooked and cooked CIE a*, water-holding capacity, cooking yield, and shear force than the control sample (p < 0.05). Moreover, samples containing 2% and 3% crust showed significantly lower diameter and thickness reductions than those of the control sample (p < 0.05). The sensory evaluation conferred by the crust was significantly higher than that of the control sample (p < 0.05). Overall, our results suggest that pork patties supplemented with 3% crust have improved properties.

This study aimed at evaluating the applicability of a newly-developed chitosan/oleic acid edible coating for extending the shelf-life of fresh pork under aerobic-packaging conditions. Various coating formulations were used: 2% chitosan alone (CHI), 0.5% (v/v) oleic acid in 2% chitosan (CHI/0.5%OA) and 1% (v/v) oleic acid in 2% chitosan (CHI/1%OA) were prepared. For coating, fresh pork slices were fully immersed in the coating solutions for 30 s and dried naturally at 4 °C for 30 min. The coated samples were placed on trays, over-wrapped with plastic film, stored at 4 °C for 21 days, and were analyzed for shelf-life stability. Samples without coating were used as control. It was found that the aerobic bacteria and Pseudomonas spp. counts, and total volatile basic nitrogen (TVBN) content were almost two to three times lower in the CHI/OA-coated samples compared to the control after 21 days of storage (p < 0.05). The CHI/OA coating combination completely inhibited growth of E. coli, and protected the meat from discoloration after 21 days of storage. In particular, the addition of OA increased the concentration of volatiles associated with pleasant aromas. This study provides an application potential of chitosan/oleic acid edible coating in preservation of fresh pork to prolong the shelf-life and improve safety.

In this study, crude peptide fractions from Hanwoo loins were released by injecting with proteolytic enzymes [no enzymes (control); protease type XIII (E1); thermolysin (E2); and combination of E1 and E2 (E3)] and their bioactivities were determined. The peptides derived from E2-injected Hanwoo loin exhibited the highest angiotensin I–converting enzyme (ACE) inhibitory activity and vitamin C equivalents antioxidant capacity among the treatments. The released peptide by treatment of E2 and E3 had similar (P > 0.05) inhibitory activity in HT29 cancer cell viability compared with luteolin as a positive control and non-cytotoxic effect on normal cell (3T3-L1). Therefore, the released peptide fraction from thermolysin (E2)-injected Hanwoo beef might contain potent bioactive peptides with ACE inhibitory and antioxidative activity and inhibition effect on certain cancer cell viability.

Geographical origin and authenticity are the two crucial factors that propel overall cheese perception in terms of quality and price; therefore, they are of great importance to consumers and commercial cheese producers. Herein, we demonstrate a rapid, accurate method for discrimination of domestic and import mozzarella cheeses in the Republic of Korea by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The protein profiles’ data aided by multivariate statistical analysis successfully differentiated farmstead and import mozzarella cheeses according to their geographical location of origin. A similar investigation within domestic samples (farmsteads/companies) also showed clear discrimination regarding the producer. Using the biomarker discovery tool, we identified seven distinct proteins, of which two (m/z 7407.8 and 11,416.6) were specific in farmstead cheeses, acting as potential markers to ensure authentication and traceability. The outcome of this study can be a good resource in building a database for Korean domestic cheeses. This study also emphasizes the combined utility of MALDI-TOF MS and multivariate analysis in preventing fraudulent practices, thereby ensuring market protection for Korean farmstead cheeses.

To evaluate the safety and risk assessment of cheese consumption in the Republic of Korea, sixty cheese samples purchased from the farmstead and retails markets (imported) were analyzed for their biogenic amine (BA) contents. The BA profiles and quantities of eight amines (tryptamine, 2-phenylethylamine, putrescine, cadaverine, histamine, tyramine, spermidine, and spermine) were determined using high-performance liquid chromatography (HPLC). Spermine was the only amine detectable in all the samples. The BAs of fresh cheeses from both farmstead and retail markets were mostly undetectable, and comparatively at lower levels (1000 mg/kg, of which histamine accounts nearly 86 and 77% of the total levels, respectively. The tolerable limits of the potential toxic amines, histamine and tyramine surpassed in four and three imported ripened samples, respectively. Furthermore, the presence of potentiators (putrescine and cadaverine) together in samples even with a lower level of toxic amines alarms the risk in consumption. Therefore, adoption of strict hygienic practices during the entire chain of cheese production, along with obligatory monitoring and regulation of BA in cheeses seems to be mandatory to ensure the safety of the consumers.

Cryopreservation of boar semen is continually researched in reproductive technologies and genetic resource banking in breed conservation. For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Various researches have been trying to improve the quality of semen post-thawed in boar. Recently, polymorphism (g.358A>T) of cluster-of-differentiation antigen 9 (CD9) gene reported to be significant association with MOT. Also, CD9 gene was expressed in the male germ line stem cells is crucial for sperm-egg fusion, and was therefore selected as candidate gene for boar semen. This study was conducted to evaluate the pig SNP (g.358A>T) of CD9 gene as a positional controlling for semen parameters of post-thawed boar semen. To results, the g.358A>T SNP of the CD9 gene was significantly associated with the traits such as MOT, curve linear velocity, straight line velocity, average path velocity and amplitude of lateral head displacement. Particularly, the g.358A>T SNP significantly has the highest association with MOT and animals with AA genotype (pT in the intron 6 region of the porcine CD9 may be used as a molecular marker for Duroc boar Post-thawed semen quality, although its functional effect was not defined yet.

Objective: For decades, LYD ([Landrace×Yorkshire] ♀×Duroc ♂) pigs are the most commonlyused commercial breed for meat production in Korea. Recently, due to the increasing demand for premium pork, the National Institute of Animal Science (Korea) has synthesized a novel pig breed named Woori Heukdon (WHD). This study aimed at comparing the carcass traits, meat yield and quality characteristics between the LYD and WHD pigs under identical rearing condition. Methods: The WHD and LYD pigs (n = 15 each) were reared under identical conditions and fed the same commercial diet until reaching recommended market weight (100 to 120 kg). After slaughter, the carcasses were evaluated for traits and meat yield, and the meat quality was assessed on shoulder butt and belly cuts. Results: Although no significant differences (p>0.05) occurred in slaughter weight between two pig types, WHD had a lower meat yield (by about 6 kg corresponding to approximately 7%) compared to the LYD pigs (p<0.05). The WHD had a higher fat content (by 4.26% and 13.52% in the shoulder butt and belly, respectively) compared to those of LYD pigs (p<0.05). The WHD meat showed a lower cooking loss and higher a* (redness) value (p<0.05). The WHD belly had a significantly (p<0.05) higher oleic acid content and concentrations of nonanal, octanal and decanal associated with fatty odor while, the LYD meat had a higher number of pyrazines associated with roasty odor. Regarding sensory quality, higher flavor, juiciness, and acceptability higher scores were given for the WHD meat than for the LYD meat (p<0.05). Conclusion: Under identical rearing conditions the WHD exhibited a better meat quality and sensory properties. However, the use of this diet resulted in a high fat level that may be associated with high trimming loss for the WHD. [ABSTRACT FROM AUTHOR]

The present study was undertaken to investigate the quality characteristics of Korean Woori black pig (KWP) bellies and loins by different slaughter weight (SW) groups. The loin and belly samples collected from KWPs with different body weights (50, 75, 90, 105, and 120 kg) at 24 h post-mortem were used in the present investigation. The samples were analyzed for quality traits, fatty acid profiles, and volatile flavor compounds. Results showed that the fat content of the loin (8.64%) and belly samples (46.78%) was significantly higher in the 120 kg SW group compared to those of other SW groups (p<0.05). However, a lower protein content (12.20-12.67%) was found in the belly cuts of the heavier SW groups (105-120 kg) compared to those of the lighter SW groups (p<0.05). The lowest cooking loss (24.34%) was found in the loin cuts of the 120 kg SW group (p<0.05). Both the loin and belly cuts were observed to be redder in color with increasing SW (p<0.05). Higher oleic acid (C18:1, n9) and total monounsaturated fatty acid content and lower linolenic acid(C18:3, n3) and total polyunsaturated fatty acid content were observed in both cuts of the 120 kg SW group (p<0.05). Out of the flavor compounds identified, 11 and 17 compounds in the loin and belly, respectively, were associated with the SW. An increase in the SW resulted in increased concentrations of C18:1n9- and amino acid-derived flavor compounds. Overall, the meat samples of the heavier SW groups (120 kg) exhibited better quality and higher concentrations of volatile compounds associated with pleasant flavors. However, the meat of the 120 kg SW group also contained a much higher fat level (8.64 and 46.78% in the loin and belly, respectively) that may result in high trimming loss and hence a high rejection risk by consumers. [ABSTRACT FROM AUTHOR]

Predicting aspects of lean meat yield and eating quality of pork based on some particular carcass traits become increasingly important from an economic profitability point of view. The present study aimed to determine the relationship between the back-fat (BF) thickness with lean meat yield and meat quality traits of crossbred pigs. A total of 220 crossbred pigs [(Landrace × Yorkshire) ♀ × Duroc ♂] reared under identical conditions and harvested at 180 days old were slaughtered and screened for BF thickness. Four BF thickness groups: 12-15, 16-20, 21-25, and 26-30 mm were classified, and longissimus dorsi (LD) muscles from these groups were used to analyze meat quality characteristics. Results showed that increasing BF thickness decreased the lean meat yield and loin lean area. Increasing BF thickness up to 26-30 mm increased intramuscular fat content and pH of LD muscles. The LD muscles of the thicker BF (21-30 mm) groups received significantly higher flavor, juiciness, and overall acceptability scores than those of the thinner back-fat (12-20 mm) groups. Overall, when all the pre-harvest factors are kept the same, BF thickness could be considered as a primary index for predicting lean meat yield, and the minimal back-fat thickness of 21-30 mm is required to improve the overall acceptability of pork meat. [ABSTRACT FROM AUTHOR]

Objective: This study was conducted to determine the composition and diversity of the fungal flora at various control points in cheese ripening rooms of 10 dairy farms from six different provinces in the Republic of Korea. Methods: Floor, wall, cheese board, room air, cheese rind and core were sampled from cheese ripening rooms of ten different dairy farms. The molds were enumerated using YM petrifilm, while isolation was done on yeast extract glucose chloramphenicol agar plates. Morphologically distinct isolates were identified using sequencing of internal transcribed spacer region. Results: The fungal counts in 8 out of 10 dairy farms were out of acceptable range, as per hazard analysis critical control point regulation. A total of 986 fungal isolates identified and assigned to the phyla Ascomycota (14 genera) and Basidiomycota (3 genera). Of these Penicillium, Aspergillus, and Cladosporium were the most diverse and predominant. The cheese ripening rooms was overrepresented in 9 farms by Penicillium (76%), while Aspergillus in a single farm. Among 39 species, the prominent members were Penicillium commune, P. oxalicum, P. echinulatum, and Aspergillus versicolor. Most of the mold species detected on surfaces were the same found in the indoor air of cheese ripening rooms. Conclusion: The environment of cheese ripening rooms persuades a favourable niche for mold growth. The fungal diversity in the dairy farms were greatly influenced by several factors (exterior atmosphere, working personnel etc.,) and their proportion varied from one to another. Proper management of hygienic and production practices and air filtration system would be effective to eradicate contamination in cheese processing industries. [ABSTRACT FROM AUTHOR]

Objective: The present work aimed at evaluating the effects of carcass quality grade (QG) on the quality characteristics of pork meat according to Korean carcass QG system. Methods: Pork carcasses with varying in QG: 1+ (QG1+, n = 10), 1 (QG1, n = 10) and 2 (QG2, n = 10), were used to evaluate the relationship between carcass QG and meat quality. The meat quality traits, fatty acid profiles, flavor compounds and sensory qualities were measured on the longissimus dorsi muscle samples of these carcasses. Results: Pork meat of higher QG (QG1+) presented significantly higher fat content (5.43%), C18:2n-6 level (19.03%) and total unsaturated fatty acids content (62.72%). Also, the QG1+ meat was significantly higher in levels of classes of flavor compounds such as aldehydes, alcohols and hydrocarbons in comparison to those of the meat samples from the lower QG groups. The sensory evaluation results (flavor, juiciness, tenderness, and acceptability scores) of QG1+ meat was significantly higher than the QG1 and QG2 meats. The pork with lower QG (i.e., QG2) was found positively correlated to redness (r = 0.987), C18:1n-9 level (r = 1.000) but negatively correlated to the fat content (r = --0.949), and flavor (r = --0.870), juiciness (r = --0.861), tenderness (r = --0.862) and acceptability (r = --0.815) scores. Conclusion: The pork with higher QG had higher fat content, total unsaturated fatty acids and better eating quality, thus producing pork with higher QGs should be considered in order to satisfy the consumer's expectation. [ABSTRACT FROM AUTHOR]

Background: Cholesterol is an important biological compound; however, its oxidation products have been proven to be harmful to human health. Cooking, storage, and reheating methods significantly affect the safety of meat products, as they contribute to the production of cholesterol oxidation products (COPs). Methods: Three cooking methods were used to cook sausages, loin ham, bacon, luncheon meat, and pressed ham, in order to investigate the effect of cooking, storage, and reheating on total cholesterol and on the formation of COPs. Cooked samples were stored at 4 °C and reheated after 3 and 6 storage days by the same cooking method or by microwaving. The samples were assessed for total lipids, cholesterol, and cholesterol oxides. Results: The average cholesterol content in the processed meat varied from 76.0 mg/100 g to 201.70 mg/100 g. Microwaved ham showed the lowest cholesterol content compared to that of other processed meat products. Significant differences were found in cholesterol content and cholesterol oxidation products depending on cooking, storage, and reheating methods. Six cholesterol oxides were found in processed meat, of which 7β-hydroxycholesterol and α-epoxides were detected as the major oxidation products. Conclusions: Microwaving and oven grilling resulted in higher production of COPs in processed meat as compared with other cooking methods. Refrigerated storage tended to significantly increase the COPs content. [ABSTRACT FROM AUTHOR]

Background: Cholesterol oxidation products (COPs) are produced during thermal processing of animal origin foods and are considered to have negative health impacts. The model systems are helpful to understand the impact of various factors on oxidation changes in foods during cooking process. Methods: The study presented herein investigates the effects of pH, presence of unsaturated fatty acids, and heat on the formation of cholesterol oxidation products (COPs). Two model systems were designed to investigate the formation of cholesterol oxidation products in different lipid environments. The cholesterol oxides produced were quantified using gas chromatography. Results: The level of cholesterol oxidation products decreased significantly at higher pH (above 5.8) and shorter heating time (3 h). The presence of unsaturated fatty acids (linoleic and oleic acids) significantly increased the amount of COPs under low-temperature heating conditions (100 °C and 1 h) but did not affect the production of COPs at higher temperature (150 °C). Increasing the temperature to 200 °C significantly increased the amount of COPs during the first hour of heating and this amount decreased upon further heating. The most frequently observed COPs in samples were α-epoxide, 20α-hydroxycholesterol, and 25-hydroxycholesterol. Conclusions: In conclusion, pH below 5.8, presence of unsaturated fatty acid, and high cooking temperature (>150 °C) leads to increased production of cholesterol oxidation products. [ABSTRACT FROM AUTHOR]