Search

For guiding the growth regulation of high-purity TaC coatings for semiconductor high-temperature furnace components, the high-throughput thermodynamic simulation calculation of TaC coating growth process was carried out by Thermo-calc software, and the effects of deposition temperature, pressure and precursor component ratio on raw material utilization efficiency and TaC coating purity were investigated. Simulation results demonstrated that X(Ta)∶X(C)(Mole fraction ratio) determined the phase composition of the products, while X(H)∶X(C) defined the formation window of the high-purity TaC coating in the “TaCl5+C3H6+H2” system. When X(Ta)∶X(C)X(Ta)∶X(C) of 0.8～1.0 and X(H)∶X(C)≥400, the deposition temperature of 1 800～2 100 K and deposition pressure of 5 000～10 000 Pa. Under the above conditions, the high purity(>99%) and high material utilization(>99%) TaC coatings could be obtained.

The Fe–N–C material represents an attractive oxygen reduction reaction electrocatalyst, and the FeN4 moiety has been identified as a very competitive catalytic active site. Fine tuning of the coordination structure of FeN4 has an essential impact on the catalytic performance. Herein, we construct a sulfur‐modified Fe–N–C catalyst with controllable local coordination environment, where the Fe is coordinated with four in‐plane N and an axial external S. The external S atom affects not only the electron distribution but also the spin state of Fe in the FeN4 active site. The appearance of higher valence states and spin states for Fe demonstrates the increase in unpaired electrons. With the above characteristics, the adsorption and desorption of the reactants at FeN4 active sites are optimized, thus promoting the oxygen reduction reaction activity. This work explores the key point in electronic configuration and coordination environment tuning of FeN4 through S doping and provides new insight into the construction of M–N–C‐based oxygen reduction reaction catalysts. [ABSTRACT FROM AUTHOR]

High-performance pressure sensors provide the necessary conditions for smart shoe applications. In this paper, the elastic Macroporous Graphene Aerogel (MGA) was synthesized via the modified Hummers' method, and it was further combined with Expanded-Thermoplastic polyurethane (ETPU) particles to assemble MGA-ETPU flexible sensors. The MGA-ETPU has a low apparent density (3.02 mg/cm3), high conductivity (0.024 S/cm) and fast response time (50 ms). The MGA-ETPU has a large linear sensing range (0–10 kPa) and consists of two linear regions: the low-pressure region (0 to 8 kPa) and the high-pressure region (8 to 10 kPa), with sensitivities of 0.08 kPa−1, and 0.246 kPa−1, respectively. Mechanical test results show that the MGA-ETPU sensor showed 19% reduction in maximum stress after 400 loading–unloading compression cycles at 40% strain. Electrical performance tests showed that the resistance of MGA-ETPU sensor decreased by 12.5% when subjected to sudden compression at 82% strain and returned to its original state within 0.05 s. Compared to existing flexible sensors, the MGA-ETPU sensors offer excellent performance and several distinct advantages, including ease of fabrication, high sensitivity, fast response time, and good flexibility. These remarkable features make them ideally suited as flexible pressure sensors for smart shoes. [ABSTRACT FROM AUTHOR]

Fusarium oxysporum f. sp. cucumerinum (Foc) is a prominent pathogen that adversely affects cucumber (Cucumis sativus) production. In the pathogen's parasitic lifestyle, the pathogenesis and virulence evolution may be regulated by lysine acetylation, as demonstrated in many living organisms. However, its specific function in Foc remains poorly understood. In this study, the acetylome profiles of a mild virulence strain (foc-3b) and its derived virulence-enhanced strain (Ra-4) were analyzed before and post-inoculation on cucumber plants. In total, 10,664 acetylation sites were identified corresponding to 3874 proteins, and 45 conserved acetylation motifs were detected. Through comparison of the acetylomes, numerous differentially lysine-acetylated proteins were enriched in energy metabolism and protein processing processes, indicating the critical role of lysine acetylation during the transition from the saprotrophic lifestyle to the parasitic lifestyle. Comparative acetylome analyses on the two virulence-differentiated strains revealed that several differentially lysine-acetylated proteins were involved in pathways of defense response and energy metabolism. Ra-4 showed enhanced energy metabolism compared to foc-3b. This indicates that robust metabolic activity is required to achieve high virulence and facilitating adaptive evolution. Additionally, faster host responses are supported by an ample energy supply enhancing virulence. Thus, lysine acetylation plays a crucial role in the pathogenesis and virulence evolution of Foc. [ABSTRACT FROM AUTHOR]

Cucumber plants commonly suffer from Fusarium wilt disease, which is caused by Fusarium oxysporum f. sp. cucumerinum (Foc). Although resistant cultivars assist with Fusarium wilt disease control, enhancement of the virulence of Foc has been identified after monoculture of wilt-resistant cultivars. To investigate the biological characteristics that contribute to the virulence evolution of Foc, a wildtype strain foc-3b (WT) and its virulence-enhanced variant Ra-4 (InVir) were compared in terms of their growth, reproduction, stress tolerance, and colonization in cucumber plants. The InVir strain showed similar culture characteristics on PDA media to the WT strain but produced significantly more conidia (>two fold), with a distinctly higher germination rate (>four fold) than the WT strain. The colony diameter of the InVir strain increased faster than the WT strain on PDA plates; however, the mycelia dry weight of the InVir was significantly lower (<70%) than that of the WT harvested from PDB. The InVir strain exhibited a significant increase in tolerance to osmolality (1 M NaCl, 1 M KCl, etc.). The GFP-labeled InVir strain propagated in the cucumber vascular faster than the WT strain. These results suggest that increased conidia production and germination in vitro may correlate with virulence enhancement in Fusarium oxysporum f. sp. cucumerinum. This study will provide an insight into its virulence evolution and help us understand the mechanisms underlying the evolutionary biology of F. oxysporum. [ABSTRACT FROM AUTHOR]

The rapid advancement of electronic communication technology has greatly aided human productivity and quality of life, but it has also resulted in significant electromagnetic pollution issues. Traditional metals and alloys are often used for electromagnetic interference (EMI) shielding due to their excellent electrical conductivity. However, they have drawbacks such as being heavy, expensive, and having low corrosion resistance, which limits their application in electromagnetic shielding. Therefore, it is crucial to develop novel EMI shielding materials. Polymers, being highly flexible, corrosion-resistant, and possessing high specific strength, are frequently employed in electromagnetic shielding materials. In this review, we firstly introduce the basic theory of electromagnetic shielding. Then, we outline the processing methods and recent developments of polymer-based electromagnetic shielding composites, including uniform-, foam-, layered-, and segregated structures. Lastly, we present the challenges and prospects for the field, aiming to provide direction and inspiration for the study of polymer-based electromagnetic shielding composite materials. [ABSTRACT FROM AUTHOR]