Search

The Quaternary Mercure basin is a complex fault structure located in the Pollino region of the southern Apennines (Italy). A persistent seismic gap makes the Mercure basin structure one of Italy’s highest seismic risk zones. The southernmost termination of the Mercure basin is the Timpa della Manca fault. The fault’s mirror is characterised by distinctive, lineated, black-coloured striae decorating a cataclasite made of carbonate clasts. These black-coloured striae consist of a mixture of Mn phases, including hollandite, todorokite, birnessite, and orientite, which are associated with goethite and hematite along with minor amounts of phyllosilicates (chlorite, muscovite), quartz, and sursassite. This mineral association and their phase stability suggest that hydrothermal circulating fluids may have mobilised and re-precipitated low-temperature Mn hydrous phases within the shear zone, leaving remnants of higher-temperature minerals. Oceanic crust remnant blocks within the Frido Unit appear to be the most likely source of the Mn. The uniqueness of the Mn striae on the Timpa della Manca fault offers intriguing insights into fluid circulation within the Mercure basin tectonic system, with potential implications for the seismotectonic characteristics of the Pollino region.

The present paper is focused to understand the reinforcement mechanisms exerted by GO nanosheets to both strengthen and toughen cement-matrix composites since, despite intensive research, such mechanisms are still not completely clear. To such an aim, the mechanical characteristics (that is, mechanical strengths and fracture toughness) of a cement-matrix nanocomposite, with the 0.05 % of GO used as an additive, are experimentally investigated at different curing times. Since reinforcement mechanisms are closely related to cement hydration products, they are qualified and quantified by chemical, mineralogical and microstructural analyses performed at the above times of curing. The present investigation leads to the conclusion that the role of both CSH and AFt content is dominant in strengthen and toughen of cement matrix-nanocomposites with GO used as an additive.

Introduction: Bottom ashes (BA) from municipal solid waste incinerators (MSWIs) are currently classified by the European Waste Catalogue as industrial non-hazardous waste. To promote their reuse, identification and characterization of the heavy metal-bearing phases (both glass and minerals), as well as their weathering behavior, must be addressed for what concern the chemical composition, mineralogical phases, and in high concentrations and pollutants’ mobility. An important point to be noted is whether the results from a given plant can be generalized.Materials and methods: In this work, BA from five waste-to-energy (WtE) plants in northern Italy were sorted based on different grain sizes. The area showed similar MSW production, collected from a culturally homogeneous area, and similar collection management. For each grain size, a mineralogical, chemical, and physical characterization was carried out using XRF, XRD, TGA, and the leaching test.Results and discussion: We found that for major elements, the average chemical composition of the incinerators is similar, with some differences in minor elements. Ferrara (FE) and Forlì-Cesena (FC) BA show portlandite, higher ettringite, and less amorphous than the Torino (TO), Parma (PR), and Piacenza (PC) BA. This affects the pH, the release, and toxicity of the leachates. In FE and FC ashes, ettringite is insoluble, and we not only have low sulfate but also Ni and Ba beyond reglementary limits, suggesting that Ni and Ba are present as hydroxides with portlandite, which are soluble. In TO, PR, and PC, Cr and sulfates are beyond limits, suggesting that Cr comes from dissolution in ettringite. Cu and Cl are always beyond limits; the dissolution of chlorides accounts for only 30%–35% of the global Cl leachate. We observe that in the assessment of the potential toxicity of the ashes, mineralogy has a higher effect than the bulk chemical composition. Grain size sorting, although useful together with other techniques, is not by itself able to comply with the PTE risk level.Conclusion: The findings contribute to the development of efficient treatment strategies for BA, highlighting the need for a more thorough investigation to understand composition and properties and to find innovative ways to reuse, promoting the circular economy and sustainable waste management practices.

This paper reports supplementary information to “Understanding room-temperature magnetic properties of anthropogenic ashes from municipal solid waste incineration to assess potential impacts and resources” [1]. The sample-set is composed of 47 samples of bottom (BA) and fly (FA) ashes from Municipal Solid Waste Incineration (MSWI), including eight magnetic extracts of selected BA and FA materials. The sampling relies on a simple random sampling strategy at four different MSWI sites in Northern Italy [2]. X-Ray Fluorescence (XRF) analysis on pressed powder pellets, microscopic observations on thin sections and stubs, and magnetic analysis were carried out.Various magnetic measurements are presented: the magnetic susceptibility measured at two different frequencies (0.47 and 4.7 kHz); the mass-specific susceptibility of ARM (χARM), expressed in m3/kg, calculated after mass-normalization and bias DC field correction; experiments for isothermal remanent magnetization (IRM) experimented were also conducted. The latter measurement allowed the calculation of additional parameters, such as the coercivity of remanence (B0cr) and the S-ratio [3]. The IRM acquired in a field of 1.0 T was regarded as the saturation IRM (SIRM). Mass-specific magnetic susceptibility (χ) was calculated by dividing the volume susceptibility by the sample mass. Finally, hysteresis loops and backfield curves at room temperature were measured on selected samples and are available. Data can be reused as groundwork information in future studies on MSWI residues. It would be essential to produce new data on geochemical and magnetic characteristics of MSWI residues to assure good coverage of data for enhanced sustainability of these heterogeneous streams of anthropogenic materials. This combination of methods will contribute to paving the way for quick and reliable resource assessment as well as to promote environmental sustainability.

Vinte e oito corações de javalis foram estudados, observando-se a freqüência, largura e localização das pontes de miocárdio. Para o estudo macroscópico, a artéria coronária foi injetada com solução corada de Neoprene látex "450", com posterior fixação com solução de formaldeido a 10% para posterior dissecação. Pontes de miocárdio foram encontradas em 57,14% dos corações estudados, com altura variando por volta de 1,47 cm, sendo usualmente localizadas nas porções ventral (30,76%) e dorsal (26,92%) sobre as artérias coronárias direita e esquerda. Múltiplas pontes foram observadas em 31,25% dos corações e seu número variou de 2 a 6.