Search

Spongy moth (Lymantria dispar dispar) has caused considerable damage to oak trees across eastern deciduous forests. Forest management, post-outbreak, is resource intensive and typically focused on ecosystem restoration or resource loss mitigation. Some local forest managers and government partners are exploring developing technologies such as Unpiloted Aerial Systems (UASs, UAVs, or drones) to enhance their ability to gather reliable fine-scale information. However, with limited resources and the complexity of investing in hardware, software, and technical expertise, the decision to adopt UAS technologies has raised questions on their effectiveness. The objective of this study was to evaluate the abilities of two UAS surveying approaches for classifying the health of individual oak trees following a spongy moth outbreak. Combinations of two UAS multispectral sensors and two Structure from Motion (SfM)-based software are compared. The results indicate that the overall classification accuracy differed by as much as 3.8% between the hardware and software configurations. Additionally, the class-specific accuracy for 'Declining Oaks' differed by 5–10% (producer's and user's accuracies). The processing experience between open-source and commercial SfM software was also documented and demonstrated a 25-to-75-fold increase in processing duration. These results point out major considerations of time and software accessibility when selecting between hardware and software options for fine-scale forest mapping. Based on these findings, future stakeholders can decide between cost, practicality, technical complexity, and effectiveness. [ABSTRACT FROM AUTHOR]

Simple Summary: Spongy moth, formerly known as European gypsy moth, is an invasive forest pest in the United States and is under quarantine in the eastern part of the country. The flighted spongy moth complex, a group of related spongy moths formerly known as Asian gypsy moth, are pests that are not currently present in the United States. As part of our research to characterize spongy moth pathogens, we determined the genome sequences and relative amounts of genomes of an iflavirus, an RNA-based virus, from spongy moths in two locations in the USA and flighted spongy moths in two locations in China. The iflaviruses from the USA and China spongy moth populations were distinguishable from each other on the basis of their genome sequences. Iflavirus genome levels in all moth samples were very high, but these high genome levels were not associated with any obvious disease symptoms. The information in this study raises questions about the effect of RNA viruses such as iflaviruses on their hosts, and will be of interest to scientists who work with iflaviruses, spongy moth, and other forest pests. The spongy moth virus Lymantria dispar iflavirus 1 (LdIV1), originally identified from a Lymantria dispar cell line, was detected in 24 RNA samples from female moths of four populations from the USA and China. Genome-length contigs were assembled for each population and compared with the reference genomes of the first reported LdIV1 genome (Ames strain) and two LdIV1 sequences available in GenBank originating from Novosibirsk, the Russian Federation. A whole-genome phylogeny was generated for these sequences, indicating that LdIV1 viruses observed in North American (flightless) and Asian (flighted) spongy moth lineages indeed partition into clades as would be expected per their host's geographic origin and biotype. A comprehensive listing of synonymous and non-synonymous mutations, as well as indels, among the polyprotein coding sequences of these seven LdIV1 variants was compiled and a codon-level phylogram was computed using polyprotein sequences of these, and 50 additional iflaviruses placed LdIV1 in a large clade consisting mostly of iflaviruses from other species of Lepidoptera. Of special note, LdIV1 RNA was present at very high levels in all samples, with LdIV1 reads accounting for a mean average of 36.41% (ranging from 1.84% to 68.75%, with a standard deviation of 20.91) of the total sequenced volume. [ABSTRACT FROM AUTHOR]

Predictive models of ectotherm responses to environmental change often rely on thermal performance data from the literature. For insects, the majority of these data focus on two traits, development rate and thermal tolerance limits. Data are also often limited to the adult stage. Consequently, predictions based on these data generally ignore other measures of thermal performance and do not account for the role of ontogenetic variation in thermal physiology across the complex insect life cycle. Theoretical syntheses for predicting metabolic rate also make similar assumptions despite the strong influence of body size as well as temperature on metabolic rate. The aim of this study was to understand the influence of ontogenetic variation on ectotherm physiology and its potential impact on predictive modeling. To do this, we examined metabolic rate-temperature (MR-T) relationships across the larval stage in a laboratory strain of the spongy moth (Lymantria dispar dispar). Routine metabolic rates (RMRs) of larvae were assayed at eight temperatures across the first five instars of the larval stage. After accounting for differences in body mass, larval instars showed significant variation in MR-T. Both the temperature sensitivity and allometry of RMR increased and peaked during the third instar, then declined in the fourth and fifth instar. Generally, these results show that insect thermal physiology does not remain static during larval ontogeny and suggest that ontogenetic variation should be an important consideration when modeling thermal performance., Competing Interests: Competing interests The authors declare no competing or financial interests., (© 2024. Published by The Company of Biologists Ltd.)

Drought stress causes a reduction in tree growth and forest productivity, which could be aggravated by climate warming and defoliation due to moth outbreaks. We investigate how European gypsy moth (Lymantria dispar dispar L., Lepidoptera: Erebidae) outbreak and related climate conditions affected growth and wood features in host and non-host tree species in north-western Spain. There, radiata pine (Pinus radiata D. Don) plantations and chestnut (Castanea sativa Mill.) stands were defoliated by the moth larvae, whereas Maritime pine (Pinus pinaster Ait.) was not defoliated. The gypsy moth outbreak peaked in 2012 and 2013, and it was preceded by very warm spring conditions in 2011 and a dry-warm 2011–2012 winter. Using dendrochronology we compared growth responses to climate and defoliation of host species (radiata pine, chestnut) with the non-host species (Maritime pine). We also analyzed wood density derived from X-ray densitometry in defoliated and non-defoliated trees of radiata pine. We aimed to: (i) disentangle the relative effects of defoliation and climate stress on radial growth, and (ii) characterize defoliated trees of radiata pine according to their wood features (ring-width, maximum and minimum density). Radial growth during the outbreak (2012–2013) decreased on average 74% in defoliated (>50% of leaf area removed) trees of radiata pine, 43% in defoliated trees of chestnut, and 4% in non-defoliated trees of Maritime pine. After applying a BACI (Before-After-Control-Impact) type analysis, we concluded that the difference in the pattern of radial growth before and during the defoliation event was more likely due to the differences in climate between these two periods. Radiata pines produced abundant latewood intra-annual density fluctuations in 2006 and 2009 in response to wet summer conditions, suggesting a high climatic responsiveness. Minimum wood density was lower in defoliated than in non-defoliated trees of radiata pine prior to the outbreak, but increased during the outbreak. The pre-outbreak difference in minimum wood density suggests that the trees most affected by the outbreak produced tracheids with wider lumen and were more susceptible to drought stress. Results of this study illustrate (i) that the pattern of radial growth alone may be not a good indicator for reconstructing past defoliation events and (ii) that wood variables are reliable indicators for assessing the susceptibility of radiata pine to defoliation by the gypsy moth.

Drought stress causes a reduction in tree growth and forest productivity, which could be aggravated by climate warming and defoliation due to moth outbreaks. We investigate how European gypsy moth (Lymantria dispar dispar L., Lepidoptera: Erebidae) outbreak and related climate conditions affected growth and wood features in host and non-host tree species in north-western Spain. There, radiata pine (Pinus radiata D. Don) plantations and chestnut (Castanea sativa Mill.) stands were defoliated by the moth larvae, whereas Maritime pine (Pinus pinaster Ait.) was not defoliated. The gypsy moth outbreak peaked in 2012 and 2013, and it was preceded by very warm spring conditions in 2011 and a dry-warm 2011-2012 winter. Using dendrochronology we compared growth responses to climate and defoliation of host species (radiata pine, chestnut) with the non-host species (Maritime pine). We also analyzed wood density derived from X-ray densitometry in defoliated and non-defoliated trees of radiata pine. We aimed to: (i) disentangle the relative effects of defoliation and climate stress on radial growth, and (ii) characterize defoliated trees of radiata pine according to their wood features (ring-width, maximum and minimum density). Radial growth during the outbreak (2012-2013) decreased on average 74% in defoliated (>50% of leaf area removed) trees of radiata pine, 43% in defoliated trees of chestnut, and 4% in non-defoliated trees of Maritime pine. After applying a BACI (Before-After-Control-Impact) type analysis, we concluded that the difference in the pattern of radial growth before and during the defoliation event was more likely due to the differences in climate between these two periods. Radiata pines produced abundant latewood intra-annual density fluctuations in 2006 and 2009 in response to wet summer conditions, suggesting a high climatic responsiveness. Minimumwood density was lower in defoliated than in non-defoliated trees of radiata pine prior to the outbreak, but increased during the outbreak. The pre-outbreak difference in minimum wood density suggests that the trees most affected by the outbreak produced tracheids with wider lumen and were more susceptible to drought stress. Results of this study illustrate (i) that the pattern of radial growth alone may be not a good indicator for reconstructing past defoliation events and (ii) that wood variables are reliable indicators for assessing the susceptibility of radiata pine to defoliation by the gypsy moth. [ABSTRACT FROM AUTHOR]

In this study,Lymantria dispar disparlarvae, collected from three different localities in Turkey, were examined for the presence of inclusion bodies under phase contrast and electron microscopes. Inclusion bodies from infected larvae were subjected to polymerase chain reaction using the conserved primers forpolyhedrin(polh),late expression factor8 (lef-8) andlate expression factor9 (lef-9) genes. Sequence analysis confirmed that larvae collected from the three different localities contained multiple nucleopolyhedrosis viruses (MNPVs). These isolates were designated LdMNPV-T1, LdMNPV-T2 and LdMNPV-T3. Phylogenetic analyses of these isolates were performed using target genespolh,lef-8 andlef-9. Restriction endonuclease analysis of the three geographic isolates withEcoRI andPstI enzymes demonstrated some differences existed among the isolates. According to theEcoRI profile, the mean estimated size for the complete genome of each isolate (LdMNPV-T1, LdMNPV-T2 and LdMNPV-T3) was calculated to be approximately 170, 153 and 170 kb,respectively. Insecticidal activities of each isolate were tested onL. d. disparlarvae using four different viral concentrations between 103and 106 OBs/ml. Results showed that the mortalities for LdMNPV-T1, -T2 and -T3 ranged between 13–53%, 47–100% and 46–93%, respectively. The LC50and LC95values of LdMNPV-T2 were not significantly different from the respective corresponding values of the other two isolates. However, isolate LdMNPV-T2 killed larvae with a LC50value that was lower than the other two isolates. Our results suggested there are promising LdMNPV isolates in Turkey that can be used for microbial control ofL. d. disparlarvae. [ABSTRACT FROM AUTHOR]

An invasive moth, Lymantria dispar dispar , also known as the gypsy moth, originates from Europe and first came to Ontario, Canada, in 1969. The moth is a defoliator which feeds on oak and other deciduous trees, and less commonly, conifers. Outbreaks of Lymantria dispar dispar moth infestation occur every 7-10 years with rapid expansion of the population until there is a natural collapse due to pathogens and predators. In addition to the extensive environmental impact of defoliation of the tree canopy, the Lymantria dispar dispar moth larva (caterpillar) is responsible for causing a significant cutaneous eruption in exposed individuals. In our report, we describe six cases of Lymantria dispar dispar dermatitis which occurred in Ontario, Canada, in May of 2021. It is important for dermatologists to be aware of this potential diagnosis and to be aware of local infestation in affected areas., Competing Interests: Declaration of conflicting interests: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article., (© The Author(s) 2021.)

Species distribution models can be used to direct early detection of invasive species, if they include proxies for invasion pathways. Due to the dynamic nature of invasion, these models violate assumptions of stationarity across space and time. To compensate for issues of stationarity, we iteratively update regionalized species distribution models annually for European gypsy moth (Lymantria dispar dispar) to target early detection surveys for the USDA APHIS gypsy moth program. We defined regions based on the distances from the invasion spread front where shifts in variable importance occurred and included models for the non-quarantine portion of the state of Maine, a short-range region, an intermediate region, and a long-range region. We considered variables that represented potential gypsy moth movement pathways within each region, including transportation networks, recreational activities, urban characteristics, and household movement data originating from gypsy moth infested areas (U.S. Postal Service address forwarding data). We updated the models annually, linked the models to an early detection survey design, and validated the models for the following year using predicted risk at new positive detection locations. Human-assisted pathways data, such as address forwarding, became increasingly important predictors of gypsy moth detection in the intermediate-range geographic model as more predictor data accumulated over time (relative importance = 5.9%, 17.36%, and 35.76% for 2015, 2016, and 2018, respectively). Receiver operating curves showed increasing performance for iterative annual models (area under the curve (AUC) = 0.63, 0.76, and 0.84 for 2014, 2015, and 2016 models, respectively), and boxplots of predicted risk each year showed increasing accuracy and precision of following year positive detection locations. The inclusion of human-assisted pathway predictors combined with the strategy of iterative modeling brings significant advantages to targeting early detection of invasive species. We present the first published example of iterative species distribution modeling for invasive species in an operational context. [ABSTRACT FROM AUTHOR]