Search

The interplay between slab dynamics and intraplate stresses in postcollisional times creates large near-surface deformation, particularly in highly bent orogens with significant lateral variations in mechanical properties. This deformation is expressed through abnormal foredeep geometries and contrasting patterns of vertical movements. Intraplate folding is often the controlling mechanism, particularly when the orogenic belt is locked. The study of these tectonic processes in the SE Carpathians indicates a generalized subsidence period during latest Miocene-Pliocene times driven by the slab-pull and an intraplate folding due to an overall Quaternary inversion. The latter accommodates ~5 km ESE-ward movement of this area with respect to the neighboring units, which creates complicated three-dimensional deformation patterns potentially driven at a larger scale by the interaction between the Adriatic indentor and the entire Carpathians system. The lithospheric anisotropy inherited from the subduction times concentrates strain and induces large-scale deformation far away from the active plate margins. This anisotropy is dynamic because of deep mantle processes related to the subducted slab during postcollisional times, such as thermal reequilibration or increase in slab dip. doi:10.1029/2006TC001951.

[1] In front of the SE Carpathians Bend a very deep basin (Focsani Depression) developed in Miocene to Recent times. An important part of its subsidence occurred after the main stages of thrusting in the Carpathians. Apparently, the basin lies in the 'wrong' place and evolved in the 'wrong' time. In this study, we constrain its architecture and evolution by analyzing a large database consisting of more than 1000 km two-dimensional seismic lines and more than 60 wells. Around 13 km thick, Badenian-to-Quaternary ( < 16.5 Myr) sediments were deposited in the central part of the Focsani Depression. During the Badenian (16.5-13 Myr), the foreland (south of Trotus fault) underwent NE-SW directed extension and NW trending basins opened in the eastern Moesian platform. A NW-SE oriented area of subsidence stretched from the Transylvania basin through the Focsani Depression to the SE of the Moesian platform while thrusting was going on in the East European/ Scythian platform, East Carpathians, and Getic Depression. Starting with the Sarmatian (13-10 Myr), the Focsani Depression depocenter moved out of the Carpathian belt coeval with the exhumation of the south and the East Carpathians north of the Trotus fault. The basin became wider and was tilted toward the belt. Tilting was accompanied by dextral shearing mainly along the Intramoesian and Peceneaga-Camena faults. After Sarmatian times, subsidence occurred practically only SSE of Trotus fault. During Meotian-Pontian (10-5 Myr), subsidence slowed down. Stronger, Pliocene-Quaternary subsidence is coeval with normal faulting and shearing in Moesian platform. The western margin of the Focsani Depression was then tilted eastward, coeval with the exhumation of the bend zone and opening of the intramontane basins in the inner part of the belt. INDEX TERMS: 8105 Tectonophysics: Continental margins and sedimentary basins (1212); 0905 Exploration Geophysics: Continental structures (8109, 8110); 9335 Information Related to Geographic Region: Europe; 9604 Information Related to Geologic Time: Cenozoic; KEYWORDS: Carpathians foredeep, Focsani Depression, basin subsidence, extension, shearing, tilting. 2003.

Apatite fission track (AFT) and (U-Th)/He (AHe) thermochronology have been combined to constrain the exhumation history of the SE Carpathians. Cooling ages generally decrease from Cretaceous for the internal basement nappes (AFT ages), to Miocene-Quaternary (AFT and AHe, respectively) for the external sedimentary wedge. The AFT and AHe data show a Paleogene age cluster, which confirms a suspected but never demonstrated tectonic event. The new data furthermore suggest that the SE Carpathians have been affected by a middle Miocene exhumation phase related to continental collision, which occurred at rates of~0.8 mm/yr, similar to the one previously inferred for the East Carpathians. The SE Carpathian tectonic evolution, however, is overprinted by two younger exhumation events in the Pliocene--Pleistocene. The first exhumation phase (latest Miocene--early Pliocene) occurred at high exhumation rates (~1.7 mm/yr) and is interpreted as a tectonic event and/or associated with a sea level drop in the Paratethys basins during the Messinian low stand. The youngest recorded tectonic phase suggests rapid Pleistocene exhumation (~1.6 mm/yr) and is interpreted to represent crustal-scale shortening different in mechanics from collisional processes. The data suggest that the SE Carpathians did not develop as a typical double-vergent orogenic wedge; instead, exhumation was related to a foreland-vergent sequence of nappe stacking during collision and was subsequently followed by a large out-of-sequence shortening event truncating the already locked collisional boundary. Citation: Merten, S., L. Matenco, J. P. T. Foeken, F. M. Stuart, and P. A. M. Andriessen (2010), From nappe stacking to out-of sequence postcollisional deformations: Cretaceous to Quaternary exhumation history of the SE Carpathians assessed by low-temperature thermochronology, Tectonics, 29, TC3013, doi: 10.1029/2009TC002550.

Extensional basins often show along‐strike variability in terms of fault geometries, basement structures, subsidence, and thermal evolution. This is particularly pronounced when extension reactivates preexisting suture zones with opposing dip directions, that is, opposite polarities, which creates wide strike‐slip transfer zones. We have studied this extensional variability by means of thermomechanical lithospheric‐scale 3‐D numerical modeling. We conducted a series of experiments to model the extension of a thick lithosphere simulating a young orogenic area containing segmented suture zones inherited from former opposing subduction polarities, implemented as rheologically weak inclined layers with opposite dips. Numerical experiments demonstrate that the initial subduction sutures are reactivated by two long‐lived lithospheric‐scale detachment faults, which remain active until the onset of oceanic spreading. The opposite polarity of these faults causes their migration toward each other by asymmetric mantle lithosphere extension and thermal accretion. Crustal kinematics shows the formation of extensional detachment faults and high‐offset listric normal faults. These structures undergo gradual tilting during their footwall exhumation, while the rheological weak suture layers are redistributed beneath the crust. The results demonstrate an active interaction along the strike of the system between the two opposite dipping weak zones, where fault segments mechanically interact. During extension, the maximum horizontal fault offset switches the apparent sense of shear in the separating strike‐slip transfer zone. This kinematics explain the rapid change in the sense of shear in major strike‐slip transfer zones or transform faults, such as observed during the extension of the Pannonian back‐arc basin. Key Points: We have conducted 3‐D lithospheric‐scale numerical modeling of rift interactionExtensional reactivation of lithospheric‐scale suture zones has been analyzedStrike‐slip transfer faults evolve and change their sense of shear with time [ABSTRACT FROM AUTHOR]

The relationship between magma generation and the tectonic evolution of orogens during subduction and subsequent collision requires self-consistent numerical modelling approaches predicting volumes and compositions of the produced magmatic rocks. Here, we use a 2D magmatic-thermomechanical numerical modelling procedure to analyse rapid subduction of a narrow ocean, followed by Mediterranean style collision, which is characterized by the gradual accretion of lower plate material and slab migration towards the orogenic foreland. Our results suggest that magmatism has a large-scale geodynamic effect by focusing deformation throughout the entire subduction and collision process. The rheological structure and compositional layering of the crust impose a key control on the distribution of magmatic rocks within the orogen. Compared to previous simplified homogeneous crustal models, a compositionally layered crust causes an increase in felsic material influx during continental collision and results in shallower magmatic sources that migrate with time towards the foreland. Changes in the deformation style may be locally driven by magma emplacement rather than by slab movement. Our modelling also demonstrates that the migration pattern of the deformation front and the magmatic arc relative to the location of the suture zone may be driven by lower crustal indentation in the overriding plate during early stages of collision. The modelling predicts a gradual change in magma source composition with time from typical calc-alkaline to ones associated with relamination and eduction during subduction, collision and slab detachment. This transition explains the compositional changes of magma their temporal and spatial migration, as well as the observed link with deformation in the Dinarides orogen of Central Europe selected as a case study. [ABSTRACT FROM AUTHOR]

The architecture of sedimentary basins reflects the relationship between accommodation space and sediment supply, their rates and localization being variable during basin evolution. The mechanisms driving the interplay between tectonics and sedimentation in extensional back-arc basins overlying rheological weak zones inherited from an earlier orogenic evolution are less understood. A typical example is the Pannonian back-arc basin of Central Europe. It is floored by continental lithosphere and was affected by large amounts of extension driven by the subduction rollback that took place in the Carpathians and/or Dinarides. A novel kinematic and seismic sequence stratigraphic interpretation calibrated by wells allows the quantification of the link between the formation of half grabens and coeval sedimentation in the Great Hungarian Plain part of the basin. While the lower order tectonic-induced cycles characterize the main phases of extension in various subbasins, the higher-order cyclicity and associated unconformities define individual moments of fault (re)activation. Our novel interpretation of a temporal and spatial migration of extension during Miocene times explains the contrasting present-day strike of various subbasins as a result of their gradual clockwise rotation. Incorporating the observed asymmetry, in particular the associated footwall exhumation, infers that the amount of extension is much larger than previously thought. The quantitative link between tectonics and sedimentation has allowed the definition of a novel model of sedimentation in asymmetric basins that can be ported to other natural scenarios of similarly hyperextended back-arc basins observed elsewhere. [ABSTRACT FROM AUTHOR]

Sedimentary basins are affected by a large number of forcing factors during their evolution and as a result, it is often difficult to isolate the contribution of each individual factor. Many forcing factors are temporally and spatially heterogeneous; they do not affect all parts of the basin in the same way and at the same time. We show that this heterogeneity can be used to identify the contributions of forcing factors by comparing various parts of a basin. This approach is applied to the Pannonian Basin, a back-arc basin located in Central Europe. In the basin, the amounts of crustal extension, tectonic inversion and sediment influx varied in space and time, while the connection with the marine realm fluctuated. In this study we focus on two currently unresolved issues: firstly, we establish by what processes and from what directions the basin was filled in, and secondly, we investigate whether the basin was affected by the Messinian Salinity Crisis. The analysis of seismic and well data in the previously less studied SE part of the basin demonstrate that progradation occurred from the southern and eastern basin margins, complementing the previously described progradation from the northwestern and northern basin margins. Elsewhere in the basin, an unconformity observed in the progradational basin infill is intensely debated to be the result of either the Messinian Salinity Crisis ( MSC) or basin inversion. Having the advantage of minor Pliocene-Quaternary amounts of inversion in the studied part of the basin we show that no regional unconformity is present in the studied stratigraphic interval, which implies that the effects of the MSC on the basin were minor. We infer that being aware of the fact that the effects of relative sea/lake-level fluctuations may vary significantly across a basin is critical for understanding the evolution of semi-enclosed basins. [ABSTRACT FROM AUTHOR]

The transition zone between the Alps and Dinarides is a key area to investigate kinematic interactions of neighboring orogens with different subduction polarities. A study combining field kinematic and sedimentary data, microstructural observations, thermochronological data (Rb-Sr and fission track), and regional structures in the area of Medvednica Mountains has revealed a complex polyphase tectonic evolution. We document two novel stages of extensional exhumation. The first stage of extension took place along a Late Cretaceous detachment following the late Early Cretaceous nappe stacking, burial, and greenschist facies metamorphism. Two other shortening events that occurred during the latest Cretaceous-Oligocene were followed by a second event of extensional exhumation, characterized by asymmetric top-NE extension during the Miocene. Top-NW thrusting took place subsequently during the Pliocene inversion of the Pannonian Basin. The Cretaceous nappe burial, Late Cretaceous extension, and the Oligocene(-Earliest Miocene) contraction are events driven by the Alps evolution. In contrast, the latest Cretaceous-Eocene deformation reflects phases of Dinaridic contraction. Furthermore, the Miocene extension and subsequent inversion display kinematics similar with observations elsewhere in the Dinarides and Eastern Alps. All these processes demonstrate that the Medvednica Mountains were affected by Alpine phases of deformations to a much higher degree than previously thought. Similarly with what has been observed in other areas of contractional polarity changes, such as the Mediterranean, Black Sea, or New Guinea systems, the respective tectonic events are triggered by rheological weak zones which are critical for localizing the deformation created by both orogens. [ABSTRACT FROM AUTHOR]

Sea-level changes provide an important control on the interplay between accommodation space and sediment supply, in particular, for shallow-water basins where the available space is limited. Sediment exchange between connected basins separated by a subaqueous sill (bathymetric threshold) is still not well understood. When sea-level falls below the bathymetric level of this separating sill, the shallow-water basin evolution is controlled by its erosion and rapid fill. Once this marginal basin is filled, the sedimentary depocenter shifts to the open marine basin (outward shift). With new accommodation space created during the subsequent sea-level rise, sediment depocenter shifts backwards to the marginal basin (inward shift). This new conceptual model is tested here in the context of Late Miocene to Quaternary evolution of the open connection between Dacian and Black Sea basins. By the means of seismic sequence stratigraphic analysis of the Miocene- Pliocene evolution of this Eastern Paratethys domain, this case study demonstrates these shifts in sedimentary depocenter between basins. An outward shift occurs with a delay that corresponds to the time required to fill the remaining accommodation space in the Dacian Basin below the sill that separates it from the Black Sea. This study provides novel insight on the amplitude and sedimentary geometry of the Messinian Salinity Crisis ( MSC) event in the Black Sea. A large (1.3-1.7 km) sea-level drop is demonstrated by quantifying coeval sedimentation patterns that change to mass-flows and turbiditic deposits in the deep-sea part of this main sink. The post- MSC sediment routing continued into the present-day pattern of Black Sea rivers discharge. [ABSTRACT FROM AUTHOR]

Abstract: The evolution of sedimentary basins separated by uplifted topographic barriers is characterised by gradual regressive deposition until one of the basins is filled and its sedimentation bypasses to the adjacent basin, defining a depositional shift. One of the critical parameters controlling these depositional shifts is sea level variation, its drop potentially triggering a depositional shift by cancelling the available accommodation space. Conversely, a sea level rise can create new accommodation space resulting in a depositional shift towards a previously overfilled basin. Here we use a three dimensional numerical model to study the sedimentary response to sea level variations of a system of two basins. In this model, a single mountainous source area is feeding an intra-continental basin that is separated by a submarine barrier from another basin with normal marine bathymetry. The sedimentary response is modelled during a cycle of sea-level drop and subsequent rebound that exposes the barrier to sub-aerial erosion. The examined parameters are the barrier height, magnitude and duration of sea level change, climate and flexural rigidity. Modelling demonstrates that shifting the bulk of sedimentation from the continental basin to the open marine environment requires some minimum magnitudes and durations of sea level drop. Moreover, given the specific geometry and parameters of our model, an intervening barrier causes a delay of up to 0.35Myr, depending on the magnitude and duration of sea level change, to the onset of an outward depositional shift when compared to a situation without a barrier. These depositional shifts depend on changes in climate, magnitude and duration of sea level change. Model results are applied to the connectivity between the Black Sea and the Dacic Basin, suggesting that depositional shifts observed during the Messinian Salinity Crisis can be explained by a sea level drop of >1000m in the Black Sea. [Copyright &y& Elsevier]

The relationship between syn- to post-collisional orogenic shortening and stresses transmitted from other neighboring plate boundaries is important for understanding the kinematics of mountain belts, but has received little attention so far. The Apuseni Mountains are an example of an orogen in the interference zone between two other subduction systems located in the external Carpathians and Dinarides. This interference is demonstrated by the results of a combined thermochronological and structural field study that quantifies the post-collisional latest Cretaceous-Tertiary evolution. The exhumation history derived from apatite fission track and (U-Th)/He thermochronology indicates that the present-day topography of the Apuseni Mountains originates mainly from latest Cretaceous times, modified by two tectonic pulses during the Paleogene. The latter are suggested by cooling ages clustering around ∼45 Ma and ∼30 Ma and the associated shortening recorded along deep-seated fault systems. Paleogene exhumation pulses are similar in magnitude (∼3.5 km) and are coeval with the final collisional phases recorded in the Dinarides and with part of the Carpathian rotation around the Moesian promontory. These newly quantified Paleogene exhumation and shortening pulses contradict the general view of tectonic quiescence, subsidence and overall sedimentation for this time interval. The Miocene collapse of the Pannonian Basin did not induce significant regional exhumation along the western Apuseni flank, nor did the subsequent Carpathian collision. This is surprising in the overall context of Pannonian Basin formation and its subsequent inversion, in which the Apuseni Mountains were previously interpreted as being significantly uplifted in both deformation stages. [ABSTRACT FROM AUTHOR]

Abstract: The Pannonian and Dacic Basins in SE Europe are presently connected by the Danube River across the South Carpathians, to which they are in a back-arc and foreland position respectively. Part of the Paratethys realm during the Neogene, open water communication between the basins was interrupted by the Late Miocene uplift of the Carpathians. Different mechanisms have been proposed for the formation of the Danube gateway: capture of the upstream lake or an upstream river or incision of an antecedent river. Estimates on its age range from Late Miocene to Quaternary. A related issue is the effect of the large Mediterranean sea level fall related to the Messinian Salinity Crisis on the Paratethys subbasins, specifically the “isolated” Pannonian Basin. In a synthetic numerical modelling study, using a pseudo-3D code integrating tectonics, surface processes and isostasy, we addressed the causes and effects of changes in connectivity between two large sedimentary basins separated by an elevated barrier. Specifically, we aimed to find the expression of connectivity events in the sedimentary record in general and the consequences for the evolution of the Pannonian–Dacic area in particular. We studied a range of parameters including the geometry and uplift rate of the barrier, downstream sea level change and lithosphere rigidity. We found that changes in connectivity are expressed in the sedimentary record through their effect on base level in the upstream basin and supply in the downstream basin. The most important factors controlling the response are the elevation difference between the basins and the upstream accommodation space at the time of reconnection. The most pronounced effect of reconnection through lake capture is predicted for a large elevation difference and limited upstream accommodation space. Downstream increase in sediment supply is dependent on the latter rather than the reconnection event itself. Of the parameters we tested, the rigidity of the lithosphere was found to be of major importance by its control on sediment loaded subsidence and generation of accommodation space. A downstream sea level change is unlikely to induce capture, but may affect the upstream lake level by enhancing incision in a pre-existing gateway. In the Pannonian–Dacic region, the mechanically weak, continuously subsiding Pannonian lithosphere allowed accommodation of significant volumes of continental sedimentation and as a consequence, transfer of excess sediment to the downstream Dacic Basin was only gradual. The Messinian sea level fall in the Dacic Basin could have been recorded in the Pannonian Basin only if a connection between the basins already existed. More detailed modelling of river incision taking into account lateral differences in erodibility in the South Carpathians will be required to give better time constraints on the formation of the Danube Gateway. [Copyright &y& Elsevier]

Postcollisional tectonic movements in orogens and their adjacent foreland basins related to intraplate stresses and the presence of a remnant slab are likely to induce significant deformations overprinting the existing patterns of nappe emplacement. In the Carpathian Bend Zone, Romania, vertical motions associated with very limited postorogenic intraplate shortening are of similar magnitude as those generally caused by large orogenic deformations. In the Latest Miocene–Pliocene, up to 6 km of postcollisional sediments of remarkably parallel stratification were deposited in a basin extending over a large part of the present-day orogen. The Early Quaternary featured a dramatical change as the orogen was uplifted while subsidence continued in the basin, tilting the basin flank adjacent to the orogen to a vertical position. The remnant slab presently below the Bend zone in Vrancea is the prime mechanism to have driven the Pliocene subsidence. The Quaternary changes and the eastwards migration of the pattern of vertical motions can be explained by large-scale folding, in response to the overall compressive regime that is recorded in the whole Pannonian-Carpathian area. [ABSTRACT FROM AUTHOR]

Presents a derivation of the tectonic evolution of the South Carpathians-Moesian platform area. Depth-interpreted seismic sections of the Getic Depression foredeep; Analysis of outcrop- to regional-scale structures; Opening of WSW-ENE to E-W trending extensional basins; Dextral transpressive to transtensional movement within an E-W trending corridor.

Fragmentation of large continental areas by post-orogenic extension requires favourable geodynamic conditions and frequently occurs along pre-existing suture zones or nappe contacts, as exemplified by the Stong and Taku magmatic and metamorphic complexes of northern Peninsular Malaysia. For this case, we have employed a field and microstructural kinematic study combined with low temperature thermo-chronology to analyse the tectonic and exhumation history. The results show that the Late Palaeozoic - Triassic Indosinian orogeny created successive phases of burial related metamorphism, shearing and contractional deformation. This orogenic structure was subsequently dismembered during a Cretaceous thermal event that culminated in the formation of a large scale Late Santonian - Early Maastrichtian extensional detachment, genetically associated with crustal melting, the emplacement of syn-kinematic plutons and widespread migmatisation. The emplacement of these magmatic rocks led to an array of simultaneously formed structures that document deformation conditions over a wide temperature range, represented by amphibolite- and greenschist- facies mylonites and as well as brittle structures, such as cataclastic zones and normal faults that formed during exhumation in the footwall of the detachment. The formation of this detachment and a first phase of Late Cretaceous cooling was followed by renewed Eocene - Oligocene exhumation, as evidenced from our fission track ages. We infer that an initial Cretaceous thermal anomaly was responsible for the formation of an extensional gneiss dome associated with simple shear and rotation of normal faults. These Cretaceous processes played a critical role in the establishment of the presently observed crustal structure of Peninsular Malaysia. [ABSTRACT FROM AUTHOR]

Recent studies imply that the formation and evolution of many SE Asian basins was driven by extensional detachments or systems of low-angle normal faults that created significant crustal exhumation in their footwalls. In this context, the architecture of the Triassic Indosinian orogen presently exposed in Peninsular Malaysia is compatible with significant extension post-dating the orogenic event. In this study we performed a kinematic analysis based on fieldwork and microstructural observations in the Taku Schist, Kemahang granite and the surrounding Gua Musang sediments of northern Peninsular Malaysia in order to shed light on processes related to the build-up and subsequent demise of the Indosinian orogen. The first three phases of deformation were related to an overall period of E–W oriented contraction and burial metamorphism. These phases of deformation are characterized by isoclinal folding with flat lying axial plane cleavages (D1), asymmetrical folding, top-to-the-W–SW shearing (D2) and upright folding (D3). All are in general agreement with observations of the previously inferred Permo–Triassic Indosinian orogeny. During these times, the Taku Schist, a sequence of Paleozoic clastic sediments with mafic intercalations was metamorphosed to amphibolite facies. These rocks are most likely equivalent to the ones exposed in the Bentong–Raub suture zone. Structural relations suggest that the Triassic Kemahang pluton is syn-kinematic, which provides important constraints for the timing of these contractional events. We demonstrate that the overall shortening was followed by a hitherto undescribed extension in NW–SE direction resulting in the formation of a large-scale detachment, the Taku detachment, in northern Peninsular Malaysia. Extension probably reactivated the former subduction plane as a detachment and exhumed previously buried and metamorphosed rocks of similar lithological composition to the neighboring Bentong–Raub suture zone. Such a mechanism is similar to that observed in other regions, such as the Aegean, Apennines, Dinarides or the Betics–Rif system, where exhumation of (high-pressure) metamorphic rocks is largely controlled by detachments or low angle normal shear/fault systems. [ABSTRACT FROM AUTHOR]

Highlights: [•] Gravity and magnetic crustal model of the earthquake prone Vrancea Zone, Romania. [•] The crust of the East European Craton (EEC) terminates west of the Vrancea Zone. [•] The Tornquist-Tesseyre Zone in Romania lies beneath the south-eastern Carpathians. [•] Vrancea Zone intermediate depth earthquakes occur within the EEC lithosphere. [ABSTRACT FROM AUTHOR]

Abstract: This finite element modelling study addresses the contraction of rheologically layered and laterally heterogeneous lithosphere representative for the Pannonian Basin and its surroundings. The time interval and strain rate adopted in the experiments reflect the Pliocene–Quaternary inversion of the basin. Several sets of fully coupled elastoviscoplastic thermo-mechanical, plane strain 2D models explore the evolution of buckling, and stress/strain changes across the lithosphere. The viscous rheology of the asthenosphere allows for a detailed simulation of isostatic rebound during deformation. The numerical models predict the successive development of surface undulations, caused by crustal and/or lithosphere folding, at three different characteristic wavelengths. Among these, the longest wavelength folds occur systematically at the rim of the basin as marginal bulges, while the short wavelength folds overprint the earlier folds and are observed at a later stage during compression. The thermo-mechanical evolution of the lithosphere in response to progressive horizontal contraction is described in terms of a characteristic delay of the changes in the stress regime and a reduction of elastic strain in the strong crustal layers. The models predict a change in stress state along the flanks of the basin, caused by the development of weak basin lithosphere in their vicinity. Comparing the modelling results with tectonic features of the Pannonian Basin has resulted in the identification of three different stages in the Pliocene–Quaternary basin inversion of the Pannonian–Carpathian system. [Copyright &y& Elsevier]

Abstract: The Romanian East Carpathians display large-scale heterogeneities along the mountain belt, unusual foredeep geometries, significant post-collisional and neotectonic activity, and major variations in topography, mostly developed in the aftermath of late Miocene (Sarmatian; ∼11 Ma) subduction/underthrusting and continental collision between the East European/Scythian/Moesian foreland and the inner Carpathians Tisza-Dacia unit. In particular, the SE corner of the arcuate orogenic belt represents the place of still active large-scale differential vertical movements between the uplifting mountain chain and the subsiding Focşani foredeep basin. In this key area, we have analysed the configuration of the present day landforms and the drainage patterns in order to quantify the amplitude, timing and kinematics of these post-collisional late Pliocene–Quaternary vertical movements. A river network is incising in the upstream a high topography consisting of the external Carpathians nappes and the Pliocene–Lower Pleistocene sediments of the foreland. Further eastwards in the downstream, this network is cross-cutting a low topography consisting of the Middle Pleistocene–Holocene sediments of the foreland. Geological observations and well-preserved geomorphic features demonstrate a complex succession of geological structures. The late Pliocene–Holocene tectonic evolution is generally characterised by coeval uplift in the mountain chain and subsidence in the foreland. At a more detailed scale, these vertical movements took place in pulses of accelerated motion, with laterally variable amplitude both in space and in time. After a first late Pliocene uplifting period, subsidence took place during the Earliest Pleistocene resulting in a basal Quaternary unconformity. This was followed by two, quantifiable periods of increased uplift, which affected the studied area at the transition between the Carpathians orogen and the Focşani foreland basin in the late Early Pleistocene and the late Middle to late Pleistocene. Both large-scale deformation events affected the western Focşani basin flank, tilting the entire structure with ∼9° during the late Early Pleistocene and uplifted it as a block during the early Late Pleistocene. The late Early Pleistocene tilting resulted in ∼750 m uplift near the frontal monocline and by extrapolation in a presumed 3000 m uplift near the central parts of the Carpathians. The late Middle to late Pleistocene cumulative uplift reaches ∼250 m and correlates with a contemporaneous progradation of the uplifted areas towards the Focşani Basin. The uplifting events are separated by a second Quaternary unconformity. On the whole, the late Pliocene–Quaternary evolution of the Carpathians orogen/Focşani basin structure indicate large-scale differential uplift during the latest stages of a continuous post-collisional orogenic evolution. [Copyright &y& Elsevier]

The thermal evolution of collisional orogens is largely controlled by their kinematic and burial/exhumation history, where sedimentation and erosion rates, as well as shear heating and deep heat flow supply conditions for the temperature distribution, fluid flow and the associated fluid-rock interactions. The aim of our research is to understand this coupled kinematic and thermal evolution to ultimately infer the conditions favourable for subsurface geo-resources. We achieve this aim by means of numerical modelling and its application to one of the best available orogenic indentation examples, which is the Dinarides Mountains chain in Central Europe. Based on the analysis and modelling of an integrated onshore and offshore geological cross-section, we quantified the shortening, erosion/exhumation and sedimentation/burial rates, maturity of potential petroleum source rocks and the gross potential for sustainable geothermal resources. The coupled kinematic/thermal modelling revealed a general pattern of heat flow variations associated with crustal deformations. The hanging-wall and upper parts of the footwalls show increased conductivity and heat flow during episodes of thrusting, whereas the deepest parts of footwalls have lower heat flow values. Fluids are observed to migrate towards the foreland during the latest Cretaceous – Early Oligocene thrusting. The largest amounts of post-Middle Miocene shortening took place in the SE external parts of the orogen, where deep-sourced fluid ascent took place towards the foreland. In this region, significant footwall burial enhanced the maturation of potential source rocks. Modelling results infer a considerable hydrocarbon potential for the Dalmatian unit and the South Adriatic basin. The kinematic and thermal model combined with geothermal well design and well performance calculations infer a viable geothermal energy potential for the Dalmatian and High-Karst units. Results of this novel workflow allowed to quantify the orogenic kinematic and thermal history, and its bearing on conventional and sustainable geo-resources. • Coupled kinematic and thermal processes in collisional orogens. • Geodynamic processes influence on thin- and thick-skinned tectonics. • Implications of heat evolution for subsurface geo-resources. • Shortening, exhumation, erosion and sedimentation during the Dinarides evolution. [ABSTRACT FROM AUTHOR]

Abstract: The early Cretaceous and younger opening of the Black Sea has obliterated much of the older record of Tethyan subduction below southeastern Europe. The earlier Mesozoic evolution was dominated by opening and closure of Tethyan oceans between Gondwana and Laurasia with their consumption, at least in part, accommodated along the southern Eurasian margin. Crimea (Ukraine), a peninsula in the northern Black Sea, represents the northernmost region of southeastern Europe that exposes a record of a pre-Cretaceous Tethyan active margin. To shed new light on the paleosubduction zone configuration of the southeastern European margin in the Jurassic, we report 40Ar/39Ar isotope dating on 10 samples and whole rock geochemistry on 31 samples from supposedly Jurassic magmatic rocks from the Crimean peninsula. The samples can be subdivided into two age groups: middle Jurassic (~172–158Ma) and uppermost Jurassic to lowermost Cretaceous (~151–142Ma), that both have a subduction-related geochemical signature. The ages of the younger group are in conflict with previously assigned biostratigraphic ages of the units under- and overlying the volcanic complex. This might suggest a scenario where the latter were juxtaposed by faulting. We argue that the Crimean volcanics represent a fragment of a volcanic arc overlying the southeastern European continental margin. These data therefore provide evidence for Jurassic northwards subduction below the Eurasian margin, preceding the opening of the Black Sea as a back-arc basin. We argue that the corresponding Jurassic trench was already positioned south of the Turkish Pontides and the Caucasus belt, implying a very shallow slab angle in the Jurassic. [ABSTRACT FROM AUTHOR]

Abstract: Lateral variations in lithospheric strength have been adopted often in flexural modeling (both 2D and 3D) to better fit the observed basement deflections, typically supported by gravity data. This approach provides essentially a “snap-shot” of the role of lithosphere strength in determining the present day geometry. In contrast, we investigate and quantify the effects of a lateral change in lithospheric strength on the evolution of the foredeep in front of an advancing orogen. Transitions in lithospheric strength are common in the foreland of orogens and show large variations in the width of the transition zone and the strength difference. Former passive margins, for instance, will display strength changes distributed over several tens to hundreds of kilometers. Other transitions may originate from juxtaposition or accretion of pieces of lithosphere with different properties and may be characterized by a much smaller width than former passive margins. In our modeling, a constant load, representing an advancing orogenic belt, is displaced towards and across a transition from a weak to a strong plate in a 2D elastic thin plate model. The effect of different transition widths and strength contrasts on foredeep geometry and bending stress is investigated. Interference of flexural wavelengths across the transition affects foredeep geometry by causing rapid basin widening, oscillation of the bulge and volume increase. The bending stresses are found to concentrate and amplify around the strength transition. Large transition gradients, i.e. large strength contrast or small transition width, cause the highest rates of change. Basin widening caused by the orogenic load advancing towards the transition between the East European Craton and the Moesian Platform, appears to control the Sarmatian transgression over the East Carpathian foreland in Romania. [Copyright &y& Elsevier]

Abstract: The Western Black Sea basin opened during Cretaceous times by back-arc rifting in association with a north dipping subduction at the rear of the Cretaceous–Early Tertiary Pontide volcanic arc. The sedimentary wedge developed on the shelf of the Romanian Black Sea sector reflects a complex interplay between large scale rifting, uplift of the orogenic flanks, large-scale post-rift subsidence and sea level changes. We examine the detailed structural configuration of this sector for a regional correlation with the adjacent offshore in Ukraine and Bulgaria. The evolution of the western Black Sea basin started in the Albian–Cenomanian times, when two extensional phases with significantly different directions (N–S and subsequently E–W) lead to the formation of a complex interplay between isolated blocks organised in horsts and grabens generally deepening eastwards. Superposition of normal faults footwall blocks from the two extensional episodes generated a deeply subsided area with enhanced accommodation space, i.e., the Histria Depression, and, consequently, recorded a larger thickness of Paleogene sediments in the post-rift stage. (Re)activation of faults and associated folding reflects repeated inversion during the Late Cretaceous–Oligocene times, associated with subsequent periods of non-deposition and/or erosion during moments of basin fill exposure. These periods of inversion recorded in the Black Sea are controlled by coeval orogenic deformations taking place in the Balkans, Pontides and the Crimean thrust belt. Sea level fluctuations during the Neogene and late Alpine tectonics in the neighbouring orogens caused massive sedimentation followed by sediment starvation and/or significant erosion. Large thicknesses of sediments accumulated during the Pontian, presumably associated with an extensional episode deepening the distal parts of the basin and with differential compaction structures. The interpretation of a high-quality seismic dataset combined with published data allowed the correlation of major structural units and lineaments defined onshore towards the Carpathians with the ones deeply buried below the western Black Sea basin sediments. Unit correlations are furthermore used to derive an integrated tectonic image of the western Black Sea area. [Copyright &y& Elsevier]

Abstract: The DACIA PLAN (Danube and Carpathian Integrated Action on Process in the Lithosphere and Neotectonics) deep seismic sounding survey was performed in August–September 2001 in south-eastern Romania, at the same time as the regional deep refraction seismic survey VRANCEA 2001. The main goal of the experiment was to obtain new information on the deep structure of the external Carpathians nappes and the architecture of Tertiary/Quaternary basins developed within and adjacent to the seismically-active Vrancea zone, including the Focsani Basin. The seismic reflection line had a WNW–ESE orientation, running from internal East Carpathians units, across the mountainous south-eastern Carpathians, and the foreland Focsani Basin towards the Danube Delta. There were 131 shot points along the profile, with about 1 km spacing, and data were recorded with stand-alone RefTek-125s (also known as “Texans”), supplied by the University Texas at El Paso and the PASSCAL Institute. The entire line was recorded in three deployments, using about 340 receivers in the first deployment and 640 receivers in each of the other two deployments. The resulting deep seismic reflection stacks, processed to 20 s along the entire profile and to 10 s in the eastern Focsani Basin, are presented here. The regional architecture of the latter, interpreted in the context of abundant independent constraint from exploration seismic and subsurface data, is well imaged. Image quality within and beneath the thrust belt is of much poorer quality. Nevertheless, there is good evidence to suggest that a thick (∼10 km) sedimentary basin having the structure of a graben and of indeterminate age underlies the westernmost part of the Focsani Basin, in the depth range 10–25 km. Most of the crustal depth seismicity observed in the Vrancea zone (as opposed to the more intense upper mantle seismicity) appears to be associated with this sedimentary basin. The sedimentary successions within this basin and other horizons visible further to the west, beneath the Carpathian nappes, suggest that the geometry of the Neogene and recent uplift observed in the Vrancea zone, likely coupled with contemporaneous rapid subsidence in the foreland, is detached from deeper levels of the crust at about 10 km depth. The Moho lies at a depth of about 40 km along the profile, its poor expression in the reflection stack being strengthened by independent estimates from the refraction data. Given the apparent thickness of the (meta)sedimentary supracrustal units, the crystalline crust beneath this area is quite thin (<20 km) supporting the hypothesis that there may have been delamination of (lower) continental crust in this area involved in the evolution of the seismic Vrancea zone. [Copyright &y& Elsevier]

We provide lithological, sedimentological and micropalaeontological descriptions of 39 sections and boreholes crossing the upper Miocene deposits of the Rifian Corridor. These deposits represent the sedimentary remnants of the marine gateway that connected the Atlantic to the Mediterranean in the late Miocene. Results from these 39 sites were adopted to reconstruct the palaeogeographic evolution of the gateway presented in the associated research article (Capella et al., 2018) [1]. For each outcrop we present a synthesis of field observations, lithofacies, key sedimentological features, planktic and benthic assemblages.

Understanding the natural evolution of a river-delta-sea system is important to develop a strong scientific basis for efficient integrated management plans. The distribution of sediment fluxes is linked with the natural connection between sediment source areas situated in uplifting mountain chains and deposition in plains, deltas and, ultimately, in the capturing oceans and seas. The Danube River-western Black Sea is one of the most active European systems in terms of sediment re-distribution that poses significant societal challenges. We aim to derive the tectonic and sedimentological background of human-induced changes in this system and discuss their interplay. This is obtained by analysing the tectonic and associated vertical movements, the evolution of relevant basins and the key events affecting sediment routing and deposition. The analysis of the main source and sink areas is focused in particular on the Miocene evolution of the Carpatho-Balkanides, Dinarides and their sedimentary basins including the western Black Sea. The vertical movements of mountains chains created the main moments of basin connectivity observed in the Danube system. Their timing and effects are observed in sediments deposited in the vicinity of gateways, such as the transition between the Pannonian/Transylvanian and Dacian basins and between the Dacian Basin and western Black Sea. The results demonstrate the importance of understanding threshold conditions driving rapid basins connectivity changes superposed over the longer time scale of tectonic-induced vertical movements associated with background erosion and sedimentation. The spatial and temporal scale of such processes is contrastingly different and challenging. The long-term patterns interact with recent or anthropogenic induced modifications in the natural system and may result in rapid changes at threshold conditions that can be quantified and predicted. Their understanding is critical because of frequent occurrence during orogenic evolution, as commonly observed in the Mediterranean area and discussed elsewhere., (Copyright © 2015 Elsevier B.V. All rights reserved.)