Search

SMES technology based on MgB 2 superconductor and cryogenic-free cooling can offer a viable solution to power-intensive storage in the short term. One of the main obstacles to the development of dry-cooled SMES systems is the heat load removal due to the AC loss of the superconductor during fast charging and discharging cycles at high power. Accurate knowledge of the amount and distribution of AC loss in the coil is of paramount importance for the sizing and the design of the cooling system and for assessing the possible operational limits of the technology. In this manuscript, the AC loss of a 500 kJ/200 kW multifilamentary MgB 2 SMES during charge–discharge cycling at full power is numerically investigated. The methodology and assumptions of the calculation are briefly resumed, and numerical results are reported and discussed in detail. In particular, the time profile and the distribution of the dissipated power all over the coil are reported. An average dissipation of 85.5 mW/m is found all over the coil during one charge–discharge cycle at full power, with a peak of 150.1 mW/m in the turns lying at the ends of the coil. [ABSTRACT FROM AUTHOR]

A three-year research project, called DRYSMES 4GRID, was recently funded by the Italian Minister of Economic Development, Italy. The project, which involves five Italian partners (companies, universities, and research institutes), is aimed to demonstrate the feasibility of cost-competitive SMES based on magnesium diboride (MgB2 ) with a cryogen-free cooling bymeans of the manufacturing and the testing of a demonstrator with an objective rating of 500 kJ/200 kW. This rating is deemed suitable for disclosing the critical technological aspects of all components in view of practical applications. A further goal of the project is the assessment of the technical and economic benefits that the SMES can bring to real-world electric grids. The general outline and technical objectives of the project are presented in this paper. Preliminary design assumptions and results concerning the MgB2 coil and the power condition system are also discussed. [ABSTRACT FROM AUTHOR]

A saturated iron-core superconducting fault current limiter (SI-SFCL) can significantly limit the magnitude of the fault current and reduce the stress on circuit breakers in direct current (DC) power systems. The SI-SFCL consists of three main parts: one magnetic iron-core, one normal conductive primary coil (CPC), and one superconducting secondary coil (SSC). This paper deals with the design options for the coil system of the SI-SFCL and confirms their operating characteristics through a physical experiment. The electromagnetic characteristics and operational features of the SI-SFCL was analyzed by a 3D finite element method simulation model. The design of the SSC was based on shape, wire types, required fault current limit and protection aspects. In the CPC, the bobbin was designed based on material selection, cost, structural design, and the effects of the SI-SFCL on the fault current limit. Based on these simulation results, a laboratory-scale SI-SFCL was developed, specifically fabricated to operate on a 500 V, 50 A direct current (DC) power system. In the experiment, the operating characteristics of each coil were analyzed, and the fault current limit of the SI-SFCL according to the operating currents of the SSC and bobbin design of the CPC were confirmed. Finally, the cost analysis of the SI-SFCL with the proposed design options of the coil system was implemented. The results obtained through this study can be effectively used to large-scale SI-SFCL development studies for high-voltage direct current (HVDC) power systems. [ABSTRACT FROM AUTHOR]

A three-year research project, called DRYSMES 4GRID, was recently funded by the Italian Minister of Economic Development, Italy. The project, which involves five Italian partners (companies, universities, and research institutes), is aimed to demonstrate the feasibility of cost-competitive SMES based on magnesium diboride (MgB2 ) with a cryogen-free cooling bymeans of the manufacturing and the testing of a demonstrator with an objective rating of 500 kJ/200 kW. This rating is deemed suitable for disclosing the critical technological aspects of all components in view of practical applications. A further goal of the project is the assessment of the technical and economic benefits that the SMES can bring to real-world electric grids. The general outline and technical objectives of the project are presented in this paper. Preliminary design assumptions and results concerning the MgB2 coil and the power condition system are also discussed. [ABSTRACT FROM AUTHOR]