206 results on '"Mi, Gaoyang"'
Search Results
2. Formation, microstructure, and mechanical properties of oscillating laser-welded joints of 8-mm 304 stainless steel
3. In-situ intragranular multiple phases reinforced lamellar SiCp/Al-Cu joint induce excellent strength-plasticity without heat treatment
4. Research on the laser welding process and performance analysis of SiCp/Al composite and 2A14 aluminum alloy dissimilar metals
5. Simultaneous reduction in laser welding energy consumption and strength improvement of aluminum alloy joint by addition of trace carbon nanotubes
6. Surface morphological evolution and microhardness change of Cr12MoV steel by pulsed laser polishing
7. Study on the effect of ZrC and CNTs particles on Inconel 625 coatings fabricated by coaxial-wire-feed laser cladding
8. Microstructure and properties of Al–Cu–Mg alloy welded by 14 μm single-mode laser small oscillation welding
9. Investigation on the evolution of deposition layer grain structure and its effect on mechanical properties in aluminum alloy fabricated by laser directed energy deposition
10. Investigation of Ti alloying for microstructural evolution and strengthening mechanism: Avoiding Al4C3 formation in SiCp/Al composites via laser directed energy deposition
11. Ti3SiC2 reinforced Inconel 625 composites prepared via laser directed energy deposition: New insights into microstructure evolution and mechanical properties
12. Dispersion of reinforcing micro-particles in the laser welding of metal matrix composites: High-fidelity modeling with experimental characterization
13. Microstructure and mechanical properties of in-situ formation TiB2 reinforced TC4 joint prepared via corona model laser welding
14. Effects of solidification on flow dynamics: A novel comprehension of defects formation in laser penetration welding
15. A study of the effect of laser micro-texture on bond strength and fracture mechanism of paint layer
16. L12-(Al,Si)3Ti + TiC hybrids reinforced laser welded SiCp/2A14Al joint with extraordinary strength
17. Microstructure evolution, interface and mechanical properties of SiCp/2A14 joint during laser keyhole welding
18. Microstructure evolution and tribological properties of (TiB+TiC)/Ti–6Al–4V composites fabricated via in situ laser-directed energy deposition of wire and powders in an underwater environment
19. Numerical simulation of molten pool flow behavior and keyhole evolution behavior in dual-laser beam oscillating bilateral synchronous welding of T-joints
20. Silicon nitride assisted carbon nanotubes induced stacking faults and twins in aluminum alloy composite joint
21. Planetary laser welding system induced equiaxed and refined grains in 2A12 aluminum alloy weldments
22. Research on fiber laser welding formation, microstructure, and mechanical properties of 7.5 mm 304 stainless steel
23. Microstructure and mechanical properties of SiCp/Al composite fabricated by concurrent wire-powder feeding laser deposition
24. Solidification sequence and crystal growth during laser welding stainless steel to copper
25. New insight into microstructure and mechanical properties of heterostructures 7075 Al joint prepared via single mode laser welding
26. Effect of liquid column on process stability and weld formation under ultra-high power fiber laser-arc hybrid welding of thick plates
27. Evolution of as-solidified and heat-affected microstructures under different thermal manufacturing processes for 316 L stainless steel
28. Revealing the mechanism of laser welded aluminum alloy joints in-situ reinforced by carbon nanotubes based on microstructural evolution
29. In situ study on fracture behaviors of SiC/2A14Al composite joint: Co-construction of microstructure and mechanical properties via laser welding
30. Formation, microstructure, and performance of laser-welded 6061 Al alloy joint with Ti3AlC2 additive
31. EBSD study on magnetic field altering crystal texture and grain growth during laser-hybrid welding
32. Research on the mechanism of laser removal for the oxide layer in TA15 titanium alloy by analyzing in-situ high-speed camera and product characteristics
33. Effects of sinusoidal oscillating laser beam on weld formation, melt flow and grain structure during aluminum alloys lap welding
34. Multiphase-field simulation of grain coalescence behavior and its effects on solidification cracking susceptibility during welding of Al-Cu alloys
35. Solidification features and tensile performance altered by increased welding speed during laser welding GH909 superalloy
36. Influence of cleaning modes on the microstructure and performance of 5083 alloy substrate
37. Laser beam oscillation welded SiCp/2xx Al alloy: Microstructure, phase interface and mechanical properties
38. New insight into laser butt welded nonporous SiCp/2A14Al joint: Interfaces, precipitation phase and mechanical properties
39. Numerical analysis of the deformation behavior of 2205 duplex stainless steel TIG weld joint based on the microstructure and micro-mechanical properties
40. In-situ reactions and mechanical properties of 6061 aluminum alloy weld joint with SiCp by laser melting injection
41. Effect of microstructure and microtexture modified by magnetic field on as-weld notch bending performance
42. Ultrafast laser ablation of tungsten carbide: Quantification of threshold range and interpretation of feature transition.
43. Altering morphological, crystalline and compositional features in 316 L laser-MIG weldments with an external magnetic field
44. Application of sensing techniques and artificial intelligence-based methods to laser welding real-time monitoring: A critical review of recent literature
45. The metallurgical behaviors and crystallographic characteristic on macro deformation mechanism of 316 L laser-MIG hybrid welded joint
46. Modification of droplet morphology and arc oscillation by magnetic field in laser-MIG hybrid welding
47. Microstructural, porosity and mechanical properties of lap joint laser welding for 5182 and 6061 dissimilar aluminum alloys under different place configurations
48. Optimal design for dual laser beam butt welding process parameter using artificial neural networks and genetic algorithm for SUS316L austenitic stainless steel
49. Microstructure and performance of hybrid laser-arc welded high-strength low alloy steel and austenitic stainless steel dissimilar joint
50. The influence of induction pre-heating on microstructure and mechanical properties of S690QL steel joints by laser welding
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.