Search

Several molecular technologies aimed at regulating gene expression that have been recently developed as a strategy to combat inflammatory and neoplastic diseases. Among these, antisense technology is a specific, rapid, and potentially high-throughput approach for inhibiting gene expression through recognition of cellular RNAs. Advances in the understanding of the molecular mechanisms that drive tissue damage in different inflammatory diseases, including Crohn’s disease (CD) and ulcerative colitis (UC), the two major inflammatory bowel diseases (IBDs) in humans, have facilitated the identification of novel druggable targets and offered interesting therapeutic perspectives for the treatment of patients. This short review provides a comprehensive understanding of the basic concepts underlying the mechanism of action of the oligonucleotide therapeutics, and summarizes the available pre-clinical and clinical data for oligonucleotide-based therapy in IBD.

The case that is reported here describes the replanting of a 1.1 from an ectopic position during orthodontic therapy. The 9-year-old patient suffered from class 2 type malocclusion with the upper maxilla contracted, right-left posterior cross-bite. The clinical case presented the following details: in the upper incisor group, the 1.1 was overlapping the 1.2 and was distalised and completely vestibularised, whilst in the place of the 1.1, a 1.1 supernumerary persisted in occlusion. Following several medical investigations, such as OPT and, most importantly, TC cone beam investigation, the dangerous position of the dental element became clear. This did not present vestibular cortical bone but only gingival mucosa. Following these investigations, the difficulty in bringing the dental element into its natural position through orthodontic treatment became obvious since the natural position was without sufficient bone support. From this, it became obvious that surgery and replanting of the 1.1 immediately after the extraction of the supernumerary 1.1 was the only choice available.

Innate lymphoid cells (ILCs) are a group of hematopoietic cells devoid of antigen receptors that have important functions in lymphoid organogenesis, in the defense against extracellular pathogens, and in the maintenance of the epithelial barrier. Three distinct groups of ILCs have been identified on the basis of phenotypic and functional criteria and termed ILCs1, ILCs2, and ILCs3. Specifically, ILCs1 express the transcription factor T-bet and secrete T helper type-1- (Th1-) related cytokines, ILCs2 are dependent on the transcription factor RORα and express Gata-3 and the chemokine receptor homologous molecule (CRTH2) and produce Th2-related cytokines, and ILCs3 express the transcription factor RORγt and synthesize interleukin- (IL-) 17, IL-22, and, under specific stimuli, interferon-γ. ILCs represent a relatively small population in the gut, but accumulating evidence suggests that these cells could play a decisive role in orchestrating both protective and detrimental immune responses. In this review, we will summarize the present knowledge on the distribution of ILCs in the intestinal mucosa, with particular focus on their role in the control of both infections and effector cytokine response in immune-mediated pathologies.

Background: Modern cone beam computed tomography (CBCT) acquisition and three-dimensional (3D) image processing, combined with direct metal laser sintering (DMLS), allows custom-made, root-analogue implants (RAIs)., Purpose: To demonstrate how DMLS permits customized titanium RAI production, with immediate insertion and restoration in a fresh extraction socket of the anterior maxilla., Materials and Methods: A titanium RAI perfect copy of the radicular unit needed for replacement was created by customized DMLS, and inserted into a fresh extraction socket of the esthetic area of the anterior maxilla., Results: Follow-up after 1 year: the DMLS RAI implant showed a satisfactory functional and esthetic integration, with no bone resorption or soft tissue recessions., Conclusions: The production of customized DMLS RAIs opens new interesting perspectives for immediate implantation., Key Words: Direct metal laser sintering, Root analogue implant.

Periodontal disease is associated with endothelial dysfunction of the brachial artery and hemodynamic alterations of the common carotid artery. Periodontal therapy improves endothelial function. It is not known if it is able also to improve the hemodynamics of the carotid artery. The aim of the current study was to evaluate the efficacy of 2 different periodontal treatments on carotid hemodynamics: scaling and root planing (SRP) alone or together with low-level laser therapy (LLLT). Forty patients were recruited and randomly treated with SRP (n = 20) or SRP + LLLT (n = 20). Periodontal indices (plaque, gingival, and probing depth indices) were measured before and 5 months after treatment. Blood viscosity, common carotid wall shear stress, circumferential wall tension, and Peterson elastic modulus were evaluated before, soon after and 5 months after treatment. It was found that the periodontal indices improved in both groups, but significantly more so for SRP + LLLT than for SRP (decrease in gingival index 69.3% versus 45.4%, respectively, P = 0.04). In the SRP + LLLT group, after a transient reduction by 5% immediately after therapy, shear stress increased by 11% after 5 months. In SRP only group, however, shear stress variations were less marked. No significant changes were found for the other hemodynamic parameters in either of the groups. Periodontal disease treatment by SRP + LLLT can therefore be said to improve common carotid wall shear stress. This suggests a possible mechanism by which the treatment of periodontal disease has beneficial effects on the cardiovascular system.

The present study describes a new protocol for the manufacturing of custom-made hydroxyapatite scaffolds using computer-aided design/computer-aided manufacturing (CAD/CAM), to augment posterior mandibular bone and minimize surgery when severe atrophy is present. Computed tomographic images of an atrophic posterior mandible were acquired and modified into a 3-dimensional (3D) reconstruction model. This model was transferred as a stereolithographic file to a CAD program, where virtual 3D reconstructions of the alveolar ridge were performed, drawing 2 anatomically shaped, custom-made scaffolds. Computer-aided-manufacturing software generated a set of tool-paths for manufacture on a computer-numerical-control milling machine into the exact shape of the 3D projects. Clinically sized, anatomically shaped scaffolds were generated from commercially available porous hydroxyapatite blocks. The custom-made scaffolds well matched the shape of the bone defects and could be easily implanted during surgery. This matching of the shape helped to reduce the time for the operation and contributed to the good healing of the defects. At the 6-month recall, a newly formed and well-integrated bone was observed, completely filling the mandibular posterior defects, and implants were placed, with good primary stability. At the 1-year follow-up examination, the implant-supported restorations showed a good functional and esthetic integration. Although this is an interim report, this study demonstrates that anatomically shaped custom-made scaffolds can be fabricated by combining computed tomographic scans and CAD/CAM techniques. Further studies are needed to confirm these results.

Aim: In patients affected by periodontal disease, hypertension and systemic inflammation might cause an arterial hemodynamic derangement; this, in turn, can act as a mediator of the atherogenic process often seen in these patients. This study aimed at a comprehensive hemodynamic evaluation in periodontal patients., Methods: Fourty-eight subjects participating to a cardiovascular prevention programme were enrolled. Periodontitis, classical risk factors for atherosclerosis, and shear and tensile forces in both carotid and brachial arteries were evaluated. Calculated periodontal indexes were plaque, gingival and pocket deep (PD) indexes. Simple and multiple regression analyses were performed. Afterwards, 30 of them with normal PD index were compared with 30 carefully - matched patients with periodontitis., Results: Brachial and carotid parietal tension were significantly associated with periodontal indexes, especially PD-Sum, in both simple (r = 0.42, p < 0.001 for carotid artery and r = 0.36, p < 0.02 for brachial artery) and multiple regression analyses. Shear stress gave similar results. In case-control analysis, shear stress was lower by 15% and 30%, respectively, in carotid and brachial artery in patients with high PD; common carotid parietal tension was higher. Arterial stiffness resulted not associated with periodontitis., Conclusions: Periodontal disease is associated to a complex atherosclerotic prone hemodynamic derangement, particularly in large elastic arteries., (© 2013 John Wiley & Sons A/S.)

This prospective clinical study evaluated the survival rate and the implant-crown success of 201 direct laser metal forming (DLMF) implants in different clinical applications, after short-term follow-up of functional loading. At the 1-year scheduled follow-up examination, several clinical, radiographic, and prosthetic parameters were assessed. Success criteria included absence of pain, sensitivity, suppuration, exudation; absence of implant mobility; absence of continuous peri-implant radiolucency, DIB <1.5 mm; absence of prosthetic complications at the implant-abutment interface. A total of 201 implants (106 maxilla, 95 mandible) were inserted in 62 patients (39 males, 23 females; aged between 26 and 65 years) in eight different clinical centers. The sites included anterior (n = 79) and posterior (n = 122) implants. The overall implant survival rate was 99.5%, with one implant loss (maxilla: 99.0%, 1 implant failure; mandible: 100.0%, no implant failures). The mean DIB was 0.4 ± 0.2 mm. Among the survived implants (200), five did not fulfill the success criteria, giving an implant-crown success of 97.5%. This 1-year follow-up prospective clinical study gives evidence of very high survival (99.5%) and success (97.5%) rates using DLMF implants.

Objectives: In contrast to the excellent long-term outcomes described for implant-supported mandibular overdentures, less favorable long-term survival and success rates have been reported for maxillary implants supporting overdentures. The aim of this study was to evaluate the treatment outcome of "planned" bar-retained maxillary and mandibular overdentures supported by Morse taper connection implants, investigating implant survival, peri-implant tissue health, marginal bone resorption and prosthetic complications., Material and Methods: Over a 2-year period, 60 patients were enrolled in this study, in four different clinical centers. The overdentures (maxilla 38, mandible 34) were planned with support from four implants anchored on a bar. A total of 288 Morse taper connection implants (Leone Implant System(®)) were inserted (152 maxilla, 136 mandible). Implants were evaluated 5 years after insertion. Success criteria included the absence of pain, suppuration or clinical mobility, the distance between implant shoulder and first crestal bone-implant contact (DIB) <2 mm and no exudate history., Results: The overall 5-year implant survival rate was 98% (maxilla 97.4%, mandible 98.6%), with 282 implants still in function. Among these surviving implants, 278 (98.6%) were classified in the success group. At the 5-year examination, the mean DIB was 0.7 mm (±0.53). Few prosthetic complications were reported., Conclusions: With "planned" bar-retained maxillary and mandibular overdentures supported by Morse taper connection implants, satisfactory survival and success rate can be achieved., (© 2010 John Wiley & Sons A/S.)

Background: The aim of this study is to evaluate the implant survival, the implant-crown success, and the prosthetic complications of 2,549 Morse taper interference-fit connection implants., Methods: A total of 2,549 Morse taper connection implants were inserted in 893 patients from January 2003 until December 2008. At each annual recall, clinical, radiographic, and prosthetic parameters were assessed. The implant-crown success criteria included the absence of pain, suppuration, and clinical mobility; an average distance between the implant shoulder and the first visible bone contact <2 mm from initial surgery; and the absence of prosthetic complications at the implant-abutment interface. Prosthetic restorations were fixed partial prostheses (462 units); fixed full-arch prostheses (60 units); single crowns (531 units); and overdentures (93 units)., Results: The cumulative implant survival rate was 98.23% (97.25% maxilla, 99.05% mandible). The implant-crown success was 92.49%. A few prosthetic complications at implant-abutment interface were reported (0.37%). After 6 years, distance between the implant shoulder and the first visible bone contact was 1.10 mm (± 0.30 mm)., Conclusion: The use of Morse taper connection implants represents a successful procedure for the rehabilitation of partially and completely edentulous arches.