Search

Abstract Semiconductor nanowires are widely considered as the building blocks that revolutionized many areas of nanosciences and nanotechnologies. The unique features in nanowires, including high electron transport, excellent mechanical robustness, large surface area, and capability to engineer their intrinsic properties, enable new classes of nanoelectromechanical systems (NEMS). Wide bandgap (WBG) semiconductors in the form of nanowires are a hot spot of research owing to the tremendous possibilities in NEMS, particularly for environmental monitoring and energy harvesting. This article presents a comprehensive overview of the recent progress on the growth, properties and applications of silicon carbide (SiC), group III‐nitrides, and diamond nanowires as the materials of choice for NEMS. It begins with a snapshot on material developments and fabrication technologies, covering both bottom‐up and top‐down approaches. A discussion on the mechanical, electrical, optical, and thermal properties is provided detailing the fundamental physics of WBG nanowires along with their potential for NEMS. A series of sensing and electronic devices particularly for environmental monitoring is reviewed, which further extend the capability in industrial applications. The article concludes with the merits and shortcomings of environmental monitoring applications based on these classes of nanowires, providing a roadmap for future development in this fast‐emerging research field.

Tuning the natural frequency of a resonator is an innovative approach for the implementation of mechanical resonators in a broad range of fields such as timing applications, filters or sensors. The conventional electrothermal technique is not favorable towards large tuning range because of its reliance on metallic heating elements. The use of metallic heaters could limit the tuning capability due to the mismatch in thermal expansion coefficients of materials forming the resonator. To solve this drawback, herein, the design, fabrication, and testing of a highly-doped SiC bridge resonator that excludes the use of metallic material as a heating element has been proposed. Instead, free-standing SiC structure functions as the mechanical resonant component as well as the heating element. Through the use of the Joule heating effect, a frequency tuning capability of almost ∆f/fo ≈ 80% has been demonstrated. The proposed device also exhibited a wide operating frequency range from 72.3 kHz to 14.5 kHz. Our SiC device enables the development of highly sensitive resonant-based sensors, especially in harsh environments.

This work describes a novel architecture to realize high-performance gallium nitride (GaN) bulk acoustic wave (BAW) resonators. The method is based on the growth of a thick GaN layer on a metal electrode grid. The fabrication process starts with the growth of a thin GaN buffer layer on a Si (111) substrate. The GaN buffer layer is patterned and trenches are made and refilled with sputtered tungsten (W)/silicon dioxide (SiO2) forming passivated metal electrode grids. GaN is then regrown, nucleating from the exposed GaN seed layer and coalescing to form a thick GaN device layer. A metal electrode can be deposited and patterned on top of the GaN layer. This method enables vertical piezoelectric actuation of the GaN layer using its largest piezoelectric coefficient (d33) for thickness-mode resonance. Having a bottom electrode also results in a higher coupling coefficient, useful for the implementation of acoustic filters. Growth of GaN on Si enables releasing the device from the frontside using isotropic xenon difluoride (XeF2) etch and therefore eliminating the need for backside lithography and etching.

We report on the device structure and performance of germanium telluride phase change material based ohmic RF switches. Two main types of the phase change switches using direct and indirect heating methods have been designed, fabricated and measured to analyze and compare the performance of germanium telluride in RF switch applications. Both types of switches are proven to have an insertion loss of less than 0.6 dB and an isolation of more than 13 dB for up to 20 GHz. Good linearity and power handling capability results are also measured. A reconfigurable bandpass filter using the indirectly heated phase change switch has also been developed, and shows promising performance. Efforts have been made to further analyze the issues with switching reliability, and explore possible ways of improving the performance of phase change RF switches. [ABSTRACT FROM AUTHOR]