Search

This paper introduces a quasi-resonant high-efficiency high-step-up DC–DC converter requiring a reduced number of components. The proposed circuit uses a coupled inductor associated with voltage multiplier cells to ensure high-voltage-gain operation without the necessity of an extremely high number of turns ratio. Quasi-resonant operation guarantees zero current switching (ZCS) for some diodes of the converter. A detailed steady-state analysis is carried out aiming at the adequate design of the circuit. Experimental results taken from the testing of a 400 W prototype operating in closed loop with an input voltage range of 25–48 V, output voltage of 400 V and switching frequency of 100 kHz validate the analysis carried out and demonstrate the feasibility of the proposed converter. [ABSTRACT FROM AUTHOR]

An electronic ballast employing the voltage sourcecharge pump power factor correction concept is presented in this paper. Such characteristics as reliability, simplicity, and a small number of components are found in this electronic ballast. From the developed mathematical analysis, the unity power factor condition is obtained. Experimental results for a prototype applying the developed methodology to two 40-W lamps, using a fixed frequency drive, and to a second prototype with two 40-W lamps, using a self-oscillating drive, prove the efficiency of the proposed electronic ballast. Index Terms--Electronic equipment, lighting, lighting control, power electronics.

A single-stage high-power-factor LED driver based on the integration of the bridgeless boost rectifier with the nonresonant half-bridge converter (BLB-HB-NR) employing a hybrid modulation strategy is introduced in this article. A key feature of the proposal is that the system can operate with universal input voltage range and dimming from 100% to 10% of rated output power while keeping the dc-link voltage limited to a safe level. In the proposed hybrid scheme, the LEDs current is regulated by pulse-frequency-modulation (PFM) while the dc-link is controlled using an asymmetrical-pulsewidth-modulation strategy. The system owns important operational and constitutive features, such as reduced component count, high-power factor and soft switching on the main switches, thus a high-efficiency operation is achieved. Steady-state and dynamic analyses are discussed in the article and a complete control strategy is also elaborated. Finally, experimental results for a universal input voltage, 42 W output power prototype demonstrates the feasibility of the proposed lighting system. [ABSTRACT FROM AUTHOR]

A nonisolated single-stage electronic lighting system with a high power factor for driving power light-emitting diodes (LEDs) is proposed in this paper. The presented topology is based on the integration of a bridgeless boost rectifier with a nonresonant half-bridge converter. Accurate steady-state analyses of the nonresonant- and resonant-based circuits are reported, serving as the basis for designing the lighting systems. The LEDs current is adjusted by means of frequency modulation, being the converter switches driven by complementary symmetrical signals. A small-signal analysis is detailed for the proposed nonresonant scheme, providing fundamental information regarding its dynamic behavior. Also, a step-by-step design procedure based on the performed mathematical analysis is elaborated, allowing the adequate design of the proposed lighting system. In order to confirm the validity and the feasibility of the proposed converter, experimental results for a 42-W, 127- \rmV{\rm{rms}}, 50-kHz, 94.2% peak efficiency prototype are presented. [ABSTRACT FROM PUBLISHER]

During the last decade the chaotic behavior in MEMS resonators have been reported in a number of works. Here, the chaotic behavior of a micro-mechanical resonator is suppressed. The aim is to control the system forcing it to an orbit of the analytical solution obtained by the multiple scales method. The State Dependent Riccati Equation (SDRE) and the Optimal Linear Feedback Control (OLFC) strategies are used for controlling the trajectory of the system. Additionally, the SDRE technique is used in the state estimator design. The state estimation and the control techniques proved to be effective in controlling the trajectory of the system. Additionally, the robustness of the control strategies are tested considering parametric errors and measurement noise in the control loop. [ABSTRACT FROM AUTHOR]

This work presents an adaptive control that integrates two linear control strategies applied to a step-down converter: Proportional Integral Derivative (PID) and Linear Quadratic Regulator (LQR) controls. Considering the converter open loop transfer function and using the poles placement technique, the designs of the two controllers are set so that the operating point of the closed loop system presents the same natural frequency. With poles placement design, the overshoot problems of the LQR controller are avoided. To achieve the best performance of each controller, a hyperbolic tangent weight function is applied. The limits of the hyperbolic tangent function are defined based on the system error range. Simulation results using the Altera DSP Builder software in a MATLAB/SIMULINK environment of the proposed control schemes are presented. [ABSTRACT FROM AUTHOR]