Search

Liquid mulching film is an emerging film material to replace the traditional plastic film, which causes wide public concern. In this study, a graft copolymer (LS-AA) was synthesized from sodium lignosulfonate (LS) by free radical polymerization, which was added as enhancer to the cationic starch (CS) solutions to obtain the CLA based film. The grafting conditions was optimized by response surface methodology (RSM) for the preparation of LS-AA, after that the LS-AA was characterized by FTIR, XRD, and TG. The highest grafting rate was obtained under the reaction conditions of 80 °C for 2.6 h with the mass ratio of monomer and LS of 5.5/5 at initiator dosage of 1 %. The fabricated liquid mulching film with addition of LS-AA showed outstanding anti-ultraviolet, biodegradation, anti-erosion, which provided theoretical base and practical references for popularizing and application of liquid mulching film in the dust prevention and sand fixation. [ABSTRACT FROM AUTHOR]

The utilization of lignin in material fabrication has garnered significant attention despite its complex structure that greatly limits its applications. This study reports a green method for grading and modifying lignin to prepare stable hydrophobic coatings via the solvent/anti-solvent (ethanol/water) self-assembly method. First, the formic acid lignin particle (FLP) is prepared and the underlying mechanism is primarily ascribed to the hydrogen bonding, π–π interactions among aromatic groups within and between molecules, and hydrophobic interactions. The lignin nanoparticles were utilized to chelate with metal ions (iron) in order to obtain the stable hydrophobic coatings using the special nanostructures of FLP. This hydrophobic coating could be applied to different substrates (blocks, straw, and fabric). The cotton fabric exhibited an initial water contact angle (WCA) that increased from 73.4° to 129.6°, and excellent chemical and physical hydrophobic performance. Moreover, this coating has strong self-cleaning ability and could be used for oil–water separation. In this newly proposed fabrication, ethanol can be recovered in the preparation of lignin nanoparticles, which makes the green and facile preparation of a stable hydrophobic coating possible. Additionally, this work is important in upgrading formic acid lignin by controlling the polarity into value-added hydrophobic materials via green classification. [ABSTRACT FROM AUTHOR]

Solar desalination devices utilizing sustainable solar energy and the abundant resource of seawater has great potential as a response to global freshwater scarcity. Herein, a bilayered solar evaporator was designed and fabricated utilizing a facile paper sheet forming technology, which was composed of cellulose fibers decorated with Fe3O4 nanoparticles as the top absorbent layer and the original cellulose fibers as the bottom supporting substrate. The characterization of the cellulose fibers decorated with Fe3O4 nanoparticles revealed that the in situ formed Fe3O4 nanoparticles were successfully loaded on the fiber surface and presented a unique rough surface, endowing the absorber layer with highly efficient light absorption and photothermal conversion. Moreover, due to its superhydrophilic property, the cellulose fiber-based bottom substrate conferred ultra-speed water transport capability, which could enable an adequate water supply to combat the water loss caused by continuous evaporation on the top layer. With the advantages mentioned above, our designed bilayered paper-based evaporator achieved an evaporation rate ~1.22 kg m−2 h−1 within 10 min under 1 sun irradiation, which was much higher than that of original cellulose cardboard. Based on the simple and scalable manufacture process, the bilayered paper-based evaporator may have great potential as a highly efficient photothermal conversion material for real-world desalination applications. [ABSTRACT FROM AUTHOR]

The Jinyang Basin is a typical volcanic-sedimentary basin, located in the southern peripheral area of the Songliao Basin. Hydrothermal activity is often closely related to the intrusion or eruption of magma. It was recently suggested that dolomite in the Jurassic Beipiao Formation was formed under the influence of magmatic-hydrothermal activity and magmatic-hydrothermal activity might have impacts on the organic matter of the source rocks. No investigation has been aimed at the effect of magmatic-hydrothermal activities on the accumulation of organic matter in the Beipiao Formation source rocks and a comprehensive study is urgent, which would be indicative in unravelling the accumulation mechanism of organic matter and useful in further petroleum exploration. To provide important insights into these issues, we carried out a detailed investigation of geological and geochemical analysis for Wolong (WL) and Dongkuntouyingzi (DK) outcrop shales from the Lower Jurassic Beipiao Formation in the Jinyang Basin. The hydrothermal indicator discrimination diagram (Zn-Ni-Co triangular plot) and rare earth element anomalies (δEu and δCe) indicate that the formation of WL samples is associated with hydrothermal activity, but DK is not. The TOC values suggest that most of the WL and DK samples are good to very good and fair to good source rocks, respectively. The Ro values suggest that both WL (Ro = 1.17%) and DK (Ro = 1.01%) samples have entered the oil-generating stage, and WL samples were influenced by the magmatic activity with higher maturity. The biomarkers such as high steranes/hopanes, high 4-methyl steranes/C29 steranes, low Pr/Ph values and high gammacerane index suggest that WL samples were deposited in an anoxic-prone saline environment with significant contributions of algal sources. Contrarily, the DK samples were deposited in oxic-prone and freshwater paleolake with significant contributions of terrigenous organic matter. The magmatic-hydrothermal activities in the Wolong area brought numerous nutrients to the lake basin, which may facilitated the reproduction of aquatic organisms. At the same time, the magmatic-hydrothermal activities increased the salinity of water and promoted the formation of a water reducing environment, which provided an excellent environment for the preservation and enrichment of organic matter. Therefore, the magmatic-hydrothermal activities in the Wolong area promoted the formation of organic-rich source rocks and the hydrocarbon generation process. [ABSTRACT FROM AUTHOR]