Search

Analytes, from sample preparation, until entering an analytical instrument, are prone to adsorb to surfaces, driven by the chemical properties of the surface and the liquids they are dissolved in. This problem can be addressed with internal standards when a single or few known analytes are quantified that are usually not available in omics. However, minimal to no loss of analytes is the aim. Here, we present a novel assay for qualifying and quantifying interactions responsible for adsorption of molecules to surfaces (APS) by using LC–MS/MS‐based differential quantitative analysis. To reflect a broad range of chemical interactions with surfaces, a reference mixture of thousands of tryptic peptides, with known compositions was selected, representing a variety of different chemical characteristics. The assay was tested by investigating the adsorption properties of several different vials with different surface chemistries. A significant number of hydrophobic peptides adsorbed to conventional polypropylene vials. In contrast, only few peptides adsorbed to polypropylene vials, assigned as low‐protein‐binding. The highest number of peptides adsorbed to glass vials driven by electrostatic interactions. In summary, the new assay is suitable to characterize adsorption properties of different surfaces and to approximate the loss of analytes during sample preparation. [ABSTRACT FROM AUTHOR]

Background Lassa fever is endemic in large parts of West Africa. The recommended antiviral treatment is ribavirin. Two treatment regimens are currently endorsed in Nigeria: the "McCormick regimen" based on a study published in 1986 and the "Irrua regimen" constituting a simplified schedule developed at the Irrua Specialist Teaching Hospital, Nigeria. Evidence for the safety and efficacy of ribavirin in Lassa fever patients is poor and pharmacokinetic data for both regimens are lacking Methods Polymerase chain reaction-confirmed Lassa fever patients with mild to moderate disease severity were invited to participate in this prospective, observational pharmacokinetic study. Pharmacokinetics of ribavirin, clinical, virologic, and clinical laboratory parameters were assessed. Results Using a population pharmacokinetic approach, plasma concentrations of ribavirin were best described by a 3-compartment model. Drug exposure was remarkably consistent between participants. Overall, drug clearance was 28.5% lower in female compared with male participants. Median (5th-95th percentile) time above half maximal inhibitory concentration (IC50) was 37.3% (16.9%–73.1%), 16.7% (8.2%–58.5%), and 9.6% (4.9%–38.4%) on days 1, 7, and 8, respectively. Clinical laboratory parameters indicated reduction of cell damage and development of hemolytic anemia in the course of the treatment period. Conclusions This observational study characterizes the pharmacokinetics of ribavirin in the treatment of Lassa fever indicating consistent exposure across patients. Whereas only a short time interval of concentrations above the IC50 implies rather low antiviral efficacy in vivo, the prominent reduction of cell damage markers might point to indirect—potentially anti-inflammatory—effects of ribavirin. The role of ribavirin in the treatment of Lassa fever requires further scrutiny. [ABSTRACT FROM AUTHOR]

Hemodialysis fails to remove protein-bound uremic toxins that are attributed with high cardiovascular risk. Application of adsorption materials is a viable strategy, but suitable biocompatible adsorbents are still not available. Here, we demonstrate that adsorbents based on the bottom-up assembly of the intrinsically biocompatible protein cage ferritin are applicable for toxin adsorption. Due to the size-exclusion effect of its pores, only small molecules such as uremic toxins can enter the protein cage. Protein redesign techniques that target selectively the inner surface were used to introduce anchor sites for chemical modification. Porous crystalline adsorbents were fabricated by bottom-up assembly of the protein cage. Linkage of up to 96 phenylic or aliphatic molecules per container was verified by ESI-MS. Materials based on unmodified ferritin cages can already adsorb the uremic toxins. The adsorption capacity could be increased by about 50% through functionalization with hydrophobic molecules reaching 458 μg g−1 for indoxyl sulfate. The biohybrid materials show no contamination with endotoxins and do not activate blood platelets. These findings demonstrate the great potential of protein-based adsorbents for the clearance of uremic toxins: modifications enhance toxin adsorption without diminishing the biocompatibility of the final protein-based material. [ABSTRACT FROM AUTHOR]

For patients with myelofibrosis, allogeneic hematopoietic stem cell transplantation (allo-HSCT) remains the only curative treatment to date. Busulfan-based conditioning regimens are commonly used, although high inter-individual variability (IIV) in busulfan drug exposure makes individual dose selection challenging. Since data regarding the IIV in patients with myelofibrosis are sparse, this study aimed to develop a population pharmacokinetic (PopPK) model of busulfan and its metabolite sulfolane in patients with myelofibrosis. The influence of patient-specific covariates on the pharmacokinetics of drug and metabolite was assessed using non-linear mixed effects modeling in NONMEM®. We obtained 523 plasma concentrations of busulfan and its metabolite sulfolane from 37 patients with myelofibrosis. The final model showed a population clearance (CL) and volume of distribution (Vd) of 0.217 L/h/kg and 0.82 L/kg for busulfan and 0.021 L/h/kg and 0.65 L/kg for its metabolite. Total body weight (TBW) and a single-nucleotide polymorphism of glutathione-S-transferase A1 (GSTA1 SNP) displayed a significant impact on volume of distribution and metabolite clearance, respectively. This is the first PopPK-model developed to describe busulfan's pharmacokinetics in patients with myelofibrosis. Incorporating its metabolite sulfolane into the model not only allowed the characterization of the covariate relationship between GSTA1 and the clearance of the metabolite but also improved the understanding of busulfan's metabolic pathway. [ABSTRACT FROM AUTHOR]

The FDA announced a boxed warning for tigecycline due to progression of infections caused by Gram-negative bacteria and increased risk of mortality during treatment. Plasma exposure of tigecycline might not prevent bacteraemia in these cases from the focuses. Hence, we evaluated intensified dosing regimens and breakpoints that might suppress bloodstream infections, caused by progression of infection by e.g., Gram-negatives. A pharmacometric model was built from tigecycline concentrations (100–600 mg daily doses) against clinical Klebsiella pneumoniae isolates (MIC 0.125–0.5 mg/L). Regrowth occurred at clinically used doses and stasis was only achieved with 100 mg q8h for the strain with the lowest studied MIC of 0.125 mg/L. Stasis at 24 h was related to f AUC/MIC of 38.5. Our study indicates that even intensified dosing regimens might prevent bloodstream infections only for MIC values ≤0.125 mg/L for tigecycline. This indicates an overly optimistic breakpoint of 1 mg/L for Enterobacterales, which are deemed to respond to the tigecycline high dose regimen (EUCAST Guidance Document on Tigecycline Dosing 2022). [ABSTRACT FROM AUTHOR]

Analytes, from sample preparation, until entering an analytical instrument, are prone to adsorb to surfaces, driven by the chemical properties of the surface and the liquids they are dissolved in. This problem can be addressed with internal standards when a single or few known analytes are quantified that are usually not available in omics. However, minimal to no loss of analytes is the aim. Here, we present a novel assay for qualifying and quantifying interactions responsible for adsorption of molecules to surfaces (APS) by using LC-MS/MS-based differential quantitative analysis. To reflect a broad range of chemical interactions with surfaces, a reference mixture of thousands of tryptic peptides, with known compositions was selected, representing a variety of different chemical characteristics. The assay was tested by investigating the adsorption properties of several different vials with different surface chemistries. A significant number of hydrophobic peptides adsorbed to conventional polypropylene vials. In contrast, only few peptides adsorbed to polypropylene vials, assigned as low-protein-binding. The highest number of peptides adsorbed to glass vials driven by electrostatic interactions. In summary, the new assay is suitable to characterize adsorption properties of different surfaces and to approximate the loss of analytes during sample preparation., (© 2024 The Author(s). Chemistry - A European Journal published by Wiley-VCH GmbH.)

Hemodialysis fails to remove protein-bound uremic toxins that are attributed with high cardiovascular risk. Application of adsorption materials is a viable strategy, but suitable biocompatible adsorbents are still not available. Here, we demonstrate that adsorbents based on the bottom-up assembly of the intrinsically biocompatible protein cage ferritin are applicable for toxin adsorption. Due to the size-exclusion effect of its pores, only small molecules such as uremic toxins can enter the protein cage. Protein redesign techniques that target selectively the inner surface were used to introduce anchor sites for chemical modification. Porous crystalline adsorbents were fabricated by bottom-up assembly of the protein cage. Linkage of up to 96 phenylic or aliphatic molecules per container was verified by ESI-MS. Materials based on unmodified ferritin cages can already adsorb the uremic toxins. The adsorption capacity could be increased by about 50% through functionalization with hydrophobic molecules reaching 458 μg g -1 for indoxyl sulfate. The biohybrid materials show no contamination with endotoxins and do not activate blood platelets. These findings demonstrate the great potential of protein-based adsorbents for the clearance of uremic toxins: modifications enhance toxin adsorption without diminishing the biocompatibility of the final protein-based material.

Colloidal approaches allow for the synthesis of Au nanoclusters (NCs) with atomic precision and sizes ranging from a few to hundreds of atoms. In most of the cases, these processes involve a common strategy of thiol etching of initially polydisperse Au nanoparticles into atomically precise NCs, resulting in the release of Au-thiolate complexes as byproducts. To the best of our knowledge, neither the removal of these byproducts nor the mass spectra in the relevant mass region were shown in previous studies. A thorough analysis of inorganic byproducts in the synthesis of [Au25(PPh3)10(PET)5X2]2+ NC, abbreviated as Au25 NC, reveals that published protocols lead to Au25 NCs in vanishingly small quantities compared to their byproducts. Three purification methods are presented to separate byproducts from the desired Au25 NCs which are proposed to be applicable to other promising Au NC systems. Additionally, critical factors for a successful synthesis of Au25 NCs are identified and discussed including the role of residual water. An important finding is that the etching duration is very critical and must be monitored by UV-Vis spectroscopy resulting in synthetic yields as high as 40%.