Search

This paper focuses on the mathematical and numerical modeling of the electric arc + laser beam welding (HLAW) process using an innovative model of the Yb:YAG laser heat source. Laser energy distribution is measured experimentally using a UFF100 analyzer. The results of experimental research, including the beam profile and energetic characteristics of an electric arc, are used in the model. The laser beam description is based on geostatistical kriging interpolation, whereas the electric arc is modeled using Goldak's distribution. Hybrid heat source models are used in numerical algorithms to analyze physical phenomena occurring in the laser–arc hybrid welding process. Thermal phenomena with fluid flow in the fusion zone (FZ) are described by continuum conservation equations. The kinetics of phase transformations in the solid state are determined using Johnson–Mehl–Avrami (JMA) and Koistinen–Marburger (KM) equations. A continuous cooling transformation (CCT) diagram is determined using interpolation functions and experimental research. An experimental dilatometric analysis for the chosen cooling rates is performed to define the start and final temperatures as well as the start and final times of phase transformations. Computer simulations of butt-welding of S355 steel are executed to describe temperature and melted material velocity profiles. The predicted FZ and heat-affected zone (HAZ) are compared to cross-sections of hybrid welded joints, performed using different laser beam focusing. The obtained results confirm the significant influence of the power distribution of the heat source and the laser beam focusing point on the temperature distribution and the characteristic zones of the joint. [ABSTRACT FROM AUTHOR]

T-joints are often used in large-scale welded constructions. The use of a laser beam for welding allows to create joints using various techniques. Used welding method affects the shape and size of heat affected zone, deformation of welded elements and consequently the quality of the joint. This work concerns the numerical modeling of the size of heat affected zone and welding deformations in T-joint obtained with two different welding techniques: single-side fillet T-joint and butt welded T-joint, called I-core welded joint. Numerical simulations are carried out in the commercial Abaqus FEA software, supplemented by an additional numerical subroutines which enabled the analysis of thermomechanical phenomena occurring in welding process. Mathematical model of a moveable welding source and the description of heat source positioning relative to the edges of the connected elements are described in numerical subroutines. The material parameters of austenitic steel are taken into account. The size of deformations of welded joints are determined as well as the influence of two different joininig techniques of T-joint on the amount of generated welding deformations are analyzed and compared.

Laser beam cutting technology is becoming increasingly popular in various industries. Advantages of this method is a very high cutting speed and a precision of edges of cut elements. Good quality depends on many technological parameters. Numerical prediction of the effect of cutting process parameters on the quality of the surface can be useful for technologists. The work concerns the numerical analysis of the laser cutting process of sheet made of steel. The influence of selected parameters on the energy efficiency of the heat source and the cutting speed are analyzed. Numerical calculations are performed in Abaqus software. Three-dimensional discrete model of the analyzed system is developed. The standard material parameters of austenitic steel changing with the temperature are taken into account. Gauss model describing the distribution of movable heat source of a laser beam power are assumed in the solution algorithms. The influence of various parameters of the laser beam on obtained temperature field and shape of cut zone is estimated on the basis of numerical calculations. The results are compared with the results of the experiment.

This work concerns mathematical and numerical modelling of temperature field during Yb:YAG laser heating of sheets made of S355 steel with the motion of liquid steel in the fusion zone taken into account. Laser power distribution and the caustics are determined on the basis of the geostatistical kriging method. Temperature field and melted material velocity field in the fusion zone are obtained from the numerical solution of continuum mechanics equations using projection method and finite volume method. Numerical algorithms are implemented into computer solver using ObjectPascal programming language. Computer simulations of Yb:YAG laser heating process are performed for different process parameters. Characteristic zones of experimentally obtained cross sections of heated elements are compared to numerically predicted fusion zone and heat affected zone.

The numerical analysis of laser welding process with consideration analytical methods determining phase transformations and mechanical properties of welded joints are presents in this paper. The analytical CCT diagram and final structural composition of S355 steel are presented. The empirical relations presents in paper are determined by chemical compositions investigated steel and cooling rate between temperatures 800-500°C (t8/5). Phase composition and mechanical properties each of structures of steel in weld and heat affected zone (HAZ) are determined on the basis of analytical methods. Laser welded flat is used in numerical simulations in ABAQUS. Mathematical modes of volumetric welding source are used in the calculations. Temperature fields, shape and size of melting zone for selected points in the cross-section of the joint are determined on the basis of thermal cycles obtained numerical.

The paper concerns numerical analysis of thermal phenomena occurring in the butt welding of two different materials by a laser beam welding. The temperature distribution for the welded butt-joint is obtained on the basis of numerical simulations performed in the ABAQUS program. Numerical analysis takes into account the thermophysical properties of welded plate made of two different materials. Temperature distribution in analysed joints is obtained on the basis of numerical simulation in Abaqus/Standard solver, which allowed the determination of the geometry of laser welded butt-joint.

The paper concerns numerical simulations of progressive hardening include phase transformations in solid state of steel. Abaqus FEA software is used for numerical analysis of temperature field and phase transformations. Numerical subroutines, written in fortran programming language are used in computer simulations where models of the distribution of movable heat source, kinetics of phase transformations in solid state as well as thermal and structural strain are implemented. Model for evaluation of fractions of phases and their kinetics is based on continuous heating diagram and continuous cooling diagram. The numerical analysis of thermal fields, phase fractions and strain associated progressive hardening of elements made of steel were done.

Laser welding technology is applied to many types of welded joints. The determination of the influence of technological parameters on the properties of resulting joint is a significant problem for technologists. Numerical estimation of the shape of the weld and its deformation is important in the initial stage of construction design. The paper concerns computer analysis of thermal and mechanical phenomena in laser welded lap joint made of austenitic steel. Three dimensional discrete model of analyzed lap joint is created in Abaqus FEA engineering software. Numerical analysis takes into account temperature dependent thermomechanical properties of austenitic steel. The movable heat source power distribution is modelled using Gaussian distribution. Computational model takes into account the gap between the joined plates. Temperature distribution in analysed joints is presented on the basis of performed numerical simulations. The shape and size of the fusion zone as well as deformation of the joint are estimated.

The paper presents a numerical model based on the finite element method (FEM) to predict deformations and residual stresses in socket welding of different diameter stainless steel pipes made of X5CrNi18-10 steel. The next part of the paper concerns the determination of strength properties of a welded joint in terms of a shear test. A thermo-elastic–plastic numerical model is developed using Abaqus FEA software in order to determine the thermal and mechanical phenomena of the welded joint. This approach requires the implementation of moveable heat source power intensity distribution based on circumferentially moving Goldak's heat source model. This model is implemented in the additional DFLUX subroutine, written in Fortran programming language. The correctness of the assumed model of thermal phenomena is confirmed by examinations of the shape and size of the melted zone. The strength of the welded joint subjected to shear is verified by performing a compression test of welded pipes as well as computer simulations with validation of the computational model using the Dantec 3D image correlation system. [ABSTRACT FROM AUTHOR]

The welding process of dissimilar materials causes a lot of technological issues related to different properties of materials of joined elements. Thermal conductivity is one of most important factors influencing the deformation of the weld. The change of thermal conductivity in the function of the temperature can produce various strains that cannot be predicted during construction design. Different structures of materials appear during joining of dissimilar materials as well as different characteristic zones of the joint and its mechanical properties. The most important is the proper identification of joint zones and the size of deformation at the production stage of welded construction. This work presents the numerical analysis of physical phenomena in overlap welding of two sheets made of S355 carbon steel and 304 austenitic steel using a laser beam. A three-dimensional discrete model is developed taking into account thermophysical properties changing with temperature. Temperature distribution and the shape of the welding pool is predicted on the basis of performed computer simulations. The influence of thermal load on the formation of stress and strain fields is determined. [ABSTRACT FROM AUTHOR]

The paper concerns the numerical analysis of the influence for three different of welding heat source inclinations on the weld pool shape and mechanical properties of the resulting joint. Numerical analysis is based on the experimental tests of single-side welding of two sheets made of X5CrNi18-10 stainless steel. The joint is made using a laser welding heat source. Experimental test was performed for one heating source inclination. As a part of the work metallographic tests are performed on which the quality of obtained joints are determined. Numerical calculations are executed in Abaqus FEA. The same geometrical model is assumed as in the experiment. Material model takes into account changing with temperature thermophysical properties of austenitic steel. Modeling of the motion of heating source is performed in additional subroutine. The welding source parameters are assumed in accordance with the welding process parameters. Numerical calculations were performed for three different inclinations of the source. One inclination is consistent with experimental studies. The performed numerical calculations allowed to determine the temperature field, shape of welding pool as well as deformations and stress state in welded joint. The obtained results are compared to results of the experiment. [ABSTRACT FROM AUTHOR]