Search

Infrared reflection absorption spectroscopy (IRRAS) is a powerful surface-sensitive analytical technique to characterize the adsorbed molecules on metal surfaces down to (sub)monolayer coverage. In this paper, a new (inert) gas cell is presented that expands the scope of the commercially available Bruker PMA50 module. The cell is designed as a sample holder to measure thin films of molecules adsorbed on a metal substrate under a specific gaseous atmosphere. The dimensions of the cell are chosen in such a way that it can be transferred into a glovebox via the standard entrance port (Ø150 mm), allowing the investigation of air-sensitive molecules under an inert-gas atmosphere. The cell has two hose connections through which the gas atmosphere can be varied as desired. This also allows for studying the reactivity of the adsorbed structures toward the surrounding gas in situ and in a (potentially) time-dependent fashion. Furthermore, the metal substrate can be irradiated via an exposure window to investigate the influence of light on the adsorbed molecules and/or their reactivity. Using the polarization-modulation (PM-) IRRAS technique along with the described gas cell, an air-sensitive molybdenum(0) tricarbonyl complex adsorbed on an Au(111) surface is investigated. This complex reacts with molecular oxygen to the molybdenum(VI) trioxo analog, and this conversion is accelerated by irradiation with light of 365 and 440 nm. [ABSTRACT FROM AUTHOR]

Adsorption of metal‐organic complexes on metallic surfaces to produce well‐defined single site catalysts is a novel approach combining the advantages of homogeneous and heterogeneous catalysis. To avoid the "surface trans‐effect" a dome‐shaped molybdenum(0) tricarbonyl complex supported by an tolylazacalix[3](2,6)pyridine ligand is synthesized. This vacuum‐evaporable complex both activates CO and reacts with molecular oxygen (O2) to form a Mo(VI) trioxo complex which in turn is capable of catalytically mediating oxygen transfer. The molybdenum tricarbonyl‐ and trioxo complexes are investigated in the solid state, in homogeneous solution and on noble metal surfaces (Cu, Au) employing a range of spectroscopic and analytical methods. [ABSTRACT FROM AUTHOR]

Adsorption of metal‐organic complexes on metallic surfaces to produce well‐defined single site catalysts is a novel approach combining the advantages of homogeneous and heterogeneous catalysis. To avoid the "surface trans‐effect" a dome‐shaped molybdenum(0) tricarbonyl complex supported by an tolylazacalix[3](2,6)pyridine ligand is synthesized. This vacuum‐evaporable complex both activates CO and reacts with molecular oxygen (O2) to form a Mo(VI) trioxo complex which in turn is capable of catalytically mediating oxygen transfer. The molybdenum tricarbonyl‐ and trioxo complexes are investigated in the solid state, in homogeneous solution and on noble metal surfaces (Cu, Au) employing a range of spectroscopic and analytical methods. [ABSTRACT FROM AUTHOR]

Transition metal complexes form the basis for small molecule activation and are relevant for electrocatalysis. To combine both approaches the attachment of homogeneous catalysts to metallic surfaces is of significant interest. Towards this goal a molybdenum tricarbonyl complex supported by a tripodal phosphine ligand was covalently bound to a triazatriangulene (TATA) platform via an acetylene unit and the resulting TATA-functionalised complex was deposited on a Au(111) surface. The corresponding self-assembled monolayer was characterised with scanning tunnelling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and near-edge X-ray absorption fine structure (NEXAFS). The vibrational properties of the surface-adsorbed complexes were investigated with the help of infrared reflection absorption spectroscopy (IRRAS), and the frequency/intensity changes with respect to the bulk spectrum were analysed. A full vibrational analysis was performed with the help of DFT. [ABSTRACT FROM AUTHOR]

Light‐induced transitions between the trans and cis isomer of triazatriangulenium‐based azobenzene derivatives on Au(111) surfaces were observed directly by scanning tunneling microscopy, allowing atomic‐scale studies of the photoisomerization kinetics. Although the azobenzene units in these adlayers are free‐standing and spaced at uniform distances of 1.26 nm, their photoswitching depends on the isomeric state of the surrounding molecules and, specifically, is accelerated by neighboring cis isomers. These collective effects are supported by ab initio calculations indicating that the electronic excitation preferably localizes on the n–π* state of trans isomers with neighboring cis azobenzenes. [ABSTRACT FROM AUTHOR]

Molybdenum( 0)- Tricarbonyl Complex Supported by anAzacalix- pyridine Ligand: Synthesis, Characterization, Surface Deposition and Conversion to a Molybdenum( VI)- Trioxo Complex with O2 [Extracted from the article]

Self‐assembled monolayers (SAMs) decorated with photoisomerizable azobenzene glycosides are useful tools for investigating the effect of ligand orientation on carbohydrate recognition. However, photoswitching of SAMs between two specific states is characterized by a limited capacity. The goal of this study is the improvement of photoswitchable azobenzene glyco‐SAMs. Different concepts, in particular self‐dilution and rigid biaryl backbones, have been investigated. The required SH‐functionalized azobenzene glycoconjugates were synthesized through a modular approach, and the respective glyco‐SAMs were fabricated on Au(111). Their photoswitching properties have been extensively investigated by applying a powerful set of methods (IRRAS, XPS, and NEXAFS). Indeed, the combination of tailor‐made biaryl‐azobenzene glycosides and suitable diluent molecules led to photoswitchable glyco‐SAMs with a significantly enhanced and unprecedented switching capacity. [ABSTRACT FROM AUTHOR]

We report on a very unusual case of surface catalysis involving azobenzenes in contact with a Au(111) surface. A rate acceleration of the cis–trans isomerization on gold up to a factor of 1300 compared to solution is observed. By using carefully designed molecular frameworks, the electronic coupling to the surface can be systematically tuned. The isomerization kinetics of molecules with very weak coupling to the metal is similar to that found in solution. For their counterparts with strong coupling, the relaxation rate is shown to depend on the spin‐density distribution in the triplet states of the molecules. This suggests that an intersystem crossing is involved in the relaxation process. Aside from their impact on catalytic processes, these effects could be used to trigger reactions over long distances. [ABSTRACT FROM AUTHOR]

Abstract: Activating small molecules with transition metal complexes adsorbed on metal surfaces is a novel approach combining aspects of homogeneous and heterogeneous catalysis. In order to study the influence of an Au(111) substrate on the activation of the small‐molecule ligand carbon monoxide, a molybdenum tricarbonyl complex containing a PN3P pincer ligand was synthesized and investigated in the bulk, in solution, and adsorbed on an Au(111) surface. By means of a platform approach, a perpendicular orientation of the molybdenum complex was achieved and confirmed by IRRAS and NEXAFS. By using vibrational spectroscopy (IR, Raman, IRRAS) coupled to DFT calculations, the influence of the metal substrate on the activation of the CO ligands bound to the molybdenum complex was determined. The electron‐withdrawing behavior of gold causes an overall shift of the CO stretching vibrations to higher frequencies, which is partly compensated by dynamic charge transfer from the substrate to the molybdenum center, which increases its (dynamic) polarizability. [ABSTRACT FROM AUTHOR]

The syntheses of molybdenum dinitrogen complexes supported by the tridentate PEP ligands (E = N, P) prPP(Ph)P = (Ph2PCH2CH2CH2)2P(Ph), prPPHP = (Ph2PCH2CH2CH2)2PH, PN(Ph)P = (Ph2PCH2CH2)2N(Ph) and prPN(Ph)P = (Ph2PCH2CH2CH2)2N(Ph) are reported. Together with the coligand dmpm = (CH3)2PCH2P(CH3)2 dinitrogen complexes of the type [Mo(N2)(PEP)(dmpm)] are formed. The new systems are characterized by IR and NMR spectroscopy and compared with the literature-known complex [Mo(N2)(dpepp)(dmpm)] (1) (dpepp = PhP(CH2CH2PPh2)2). The consequences of the substitution of the central P-donor of dpepp by N and the replacement of its C2 by C3 linkages as well as the exchange of the EPh by an EH function are investigated with respect to the stability of the corresponding N2-complexes. Importantly, the activation of the N2 ligand drastically increases upon replacing the trans-phosphine with a trans-amine donor. [ABSTRACT FROM AUTHOR]

The syntheses of molybdenum dinitrogen complexes supported by the tridentate PEP ligands (E = N, P) prPP(Ph)P = (Ph2PCH2CH2CH2)2P(Ph), prPPHP = (Ph2PCH2CH2CH2)2PH, PN(Ph)P = (Ph2PCH2CH2)2N(Ph) and prPN(Ph)P = (Ph2PCH2CH2CH2)2N(Ph) are reported. Together with the coligand dmpm = (CH3)2PCH2P(CH3)2 dinitrogen complexes of the type [Mo(N2)(PEP)(dmpm)] are formed. The new systems are characterized by IR and NMR spectroscopy and compared with the literature-known complex [Mo(N2)(dpepp)(dmpm)] (1) (dpepp = PhP(CH2CH2PPh2)2). The consequences of the substitution of the central P-donor of dpepp by N and the replacement of its C2 by C3 linkages as well as the exchange of the EPh by an EH function are investigated with respect to the stability of the corresponding N2-complexes. Importantly, the activation of the N2 ligand drastically increases upon replacing the trans-phosphine with a trans-amine donor. [ABSTRACT FROM AUTHOR]