Search

This paper presents a novel analytical solution for the buckling load in 3D of columns that fills a gap in the existing literature by accounting for shear deformation and spatial effects. The latter means that a column can be supported and buckle in any direction. We build on the foundational work of Simo and use a 3D beam model to derive a set of equations that form the basis for our analytical solution. The paper outlines the axioms of the Simo model, presents the corresponding equations, and describes the linearization procedure in details. By linearizing the equations we obtain a set of algebraic equations with boundary conditions, which we manipulate into an analytical solution for the buckling load. An illustrative example using a column with an elliptical cross-section shows how different boundary conditions and the spatial orientation of the column influence the buckling load. This research work not only contributes to the verification of numerical programs, but also provides engineers with a valuable tool for optimizing structural configurations. [ABSTRACT FROM AUTHOR]

A mathematical model is proposed and its analytical solution derived for the analysis of the geometrically and materially linear two-layer beams with different material and geometric characteristics of an individual layer. The model takes into account the effect of the transverse shear deformation on displacements in each layer. The analytical study is carried out to evaluate the influence of the transverse shear deformation on the static and kinematic quantities. We study a simply supported two-layer planar beam subjected to the uniformly distributed load. Parametric studies have been performed to investigate the influence of shear by varying material and geometric parameters, such as interlayer slip modulus (K), flexural-to-shear moduli ratios (E/G) and span-to-depth ratios (L/h). The comparison of the results for vertical deflections shows that shear deformations are more important for high slip modulus, for 'short' beams with small L/h ratios, and beams with high E/G ratios. In these cases, the effect of the shear deformations becomes significant and has to be addressed in design. It also becomes apparent that models, which consider the partial interaction between the layers, should be employed if beams have very flexible connections. DOI: 10.1061/(ASCE)0733-9445(2007)133:6(886) CE Database subject headings: Beams; Shear deformation; Elasticity; Composite structures; Slip.

This paper focuses on development of a new mathematical model and its analytical solution for buckling analysis of elastic columns weakened simultaneously with transverse open cracks and partial longitudinal delamination. Consequently, the analytical solution for buckling loads is derived for the first time. The critical buckling loads are calculated using the proposed analytical model. A parametric study is performed to investigate the effects of transverse crack location and magnitude, length and degree of partial longitudinal delamination, and different boundary conditions on critical buckling loads of weakened columns. It is shown that the critical buckling loads of weakened columns can be greatly affected by all the analyzed parameters. Finally, the presented results can be used as a benchmark solution. [ABSTRACT FROM AUTHOR]

This paper focuses on the development of a new mathematical model and its analytical solution for the analysis of the mechanical behavior of geometrically and materially linear three-dimensional two-layer bimetallic beams with interface compliance. Consequently, the analytical solution of bending of elastic three-dimensional two-layer composite beams with interface compliance is derived for the first time. In the illustrative example, a three-dimensional two-layer cantilever composite beam made of 6061-T6 aluminum and C83400 red brass is analyzed. It is shown that interface compliance could have a significant influence on the mechanical behavior of such a structure. Finally, the results for different mechanical quantities are tabulated and as such the analytical solution presented can be used as a benchmark solution of three-dimensional bimetallic composite beams. [ABSTRACT FROM AUTHOR]

This paper presents an efficient stochastic buckling model for studying the structural reliability of layered composite columns with interlayer slip between the layers and random material and loading parameters. The model is based on the exact buckling model, response surface method, and Monte Carlo simulations. The probability of failure is investigated for a different number of random variables, sample points, and various degrees of response surfaces. The results show that the probability of failure is considerably affected by the type (deterministic or probabilistic) of the loading and its distribution. [ABSTRACT FROM AUTHOR]