Search

High-efficiency and durable electrocatalysts in an acidic environment are critical for boosting the development of proton exchange membrane water electrolyzers. Herein, we report an alloy-surface recombination strategy to fabricate a bifunctional nanoporous Pd–Ir alloy catalyst for water splitting in acidic media. The optimized nanoporous Pd50Ir50 alloy exhibits high-efficiency and durable electrocatalytic activity towards OER and HER in 0.5 M H2SO4, presenting 83 and 5 mV lower overpotential than the state-of-the-art Ir/C and Pt/C for OER and HER, respectively. Significantly, the nanoporous Pd50Ir50, as both the cathode and anode catalyst, shows remarkable performance in the water splitting electrolyser, comparable to the commercial electrolyser with paired Pt/C and Ir/C catalysts. [ABSTRACT FROM AUTHOR]

Graphdiyne oxide quantum dots (GDYO QDs), as derivatives of graphdiyne (GDY), have excellent electroconductibility and luminous properties and can be applied as a new ECL emitter. Herein, an electrochemiluminescence (ECL) biosensor for miRNA-21 ultrasensitive determination is constructed based on AuNPs/GDY, GDYO QD and oligonucleotide signal amplification strategy that integrates DNA walker and hybridization chain reaction (HCR) amplification. As electrode substrate material, AuNPs/GDY can not only bond with the aptamer CP but can also enhance the conductivity of the interface. When miRNA-21 exists, the DNA walker process is initiated, and the signaling probes are introduced on the electrode surface, producing abundant double-stranded H1/H2; then, H3/H4 undergoes complementary base pairing with H1/H2 through HCR. With the increase in miRNA-21, the 3D DNA nanomachine is actively manipulated, resulting in a gradual increase in ECL signal. This ECL biosensor demonstrates outstanding performance in the determination of miRNA-21 in the linear range from 0.1 fM to 1 nM. This study offers a new sensitive idea for the clinical analysis of cancer biomarkers. [ABSTRACT FROM AUTHOR]

Graphdiyne (GDY) is an sp and sp2 co-hydrocarbon allotrope whose particular structure endows it with many fascinating properties, including abundant chemical bonds, high conjugation, natural pores, high carrier mobility, high conductivity and stability, etc. In this work, two-dimensional graphdiyne is prepared as an electrode substrate material coupling with an exonuclease III-assisted amplification strategy to construct a superior-performance self-powered biosensor based on enzymatic biofuel cells for highly sensitive detection of the tumour marker miRNA-21. Glucose oxidase (GOD) is first immobilized on the GDY/AuNP composite to prepare a bioconjugate. GDY/AuNP modified carbon cloth is used as an enzyme biofuel cell electrode, which is then modified with bilirubin oxidase as a biocathode. The bioconjugate binds to GOD through specific binding to the bioanode. When miRNA-21 is present, specific recognition by exonuclease III in the system results in cleavage of the capture probe, and miRNA-21 is recovered and involved in the cycle. The target miRNA-21 then causes corresponding changes in the open-circuit voltage of the self-powered system. Based on this, a sensitive detection method was constructed, within the scope from 0.1 fM to 0.1 nM with a shallow detection limit of 55.2 aM (S/N = 3). The new approach triumphantly has been used to detect miRNA-21 in serum, which provides a compelling new way for early diagnosis of related cancers. [ABSTRACT FROM AUTHOR]

The present study explored a suitable parthenogenetic activation (PA) procedure for rabbit oocytes and investigated the developmental potential of somatic cell nuclear transfer (SCNT) embryos using rabbit foetal fibroblasts (RFFs). The electrical activation had the optimal rate of blastocyst (14.06%) when oocytes were activated by three direct current (DC) pulses (40 V/mm, 20 μs each) followed by 6‐dimethylaminopurine (6‐DMAP) and cycloheximide (CHX) treatment; the blastocyst rate of ionomycin (ION) + 6‐DMAP + CHX (12.07%) activation was higher than that of ION + 6‐DMAP (8.6%) activation or ION + CHX (1.24%) activation; there was no significant difference in blastocyst rate between ION + 6‐DMAP + CHX and DC + 6‐DMAP + CHX groups. The blastocyst rate of ION + 6‐DMAP + CHX‐activated oocytes in the basic rabbit culture medium (M‐199) + 10% foetal bovine serum (FBS; 14.28%) was higher than that in buffalo conditioned medium (5.75%) or G1/G2 medium (0), and the blastocyst rate was increased when M‐199 + 10% FBS was supplemented with amino acids. Refreshing culture medium every day or every other day significantly increased the blastocyst rate. Treatment of donor cells with 0.5% FBS for 3–5 days increased blastocyst rate of SCNT embryos (33.33%) than no serum starvation (22.47%) or 0.5% FBS treatment for 6–9 days (23.61%); the blastocyst rate of SCNT embryos derived from nontransgenic RFFs was higher than that derived from transgenic RFFs by electroporation. The blastocyst development ability of SCNT embryos derived from RFFs by electroporation (32.22%) was higher than that of liposome (19.11%) or calcium phosphate (20.00%) transfection, and only the embryos from electroporation group have the EGFP expression (24.44%). In conclusion, this study for the first time systematically optimized the conditions for yield of rabbit embryo by SCNT. [ABSTRACT FROM AUTHOR]

Porous asphalt (PA) mixtures are designed with a high air void (AV) (i.e., 18~22%) content allowing rainwater to infiltrate into their internal structures. Therefore, PA mixtures are more sensitive to moisture damage than traditional densely graded asphalt mixtures. However, the moisture damage evolution of PA mixtures is still unclear. The objective of this study was to investigate the moisture damage evolution and durability damage evolution of PA mixtures. The indirect tensile test (ITT), ITT fatigue test, and Cantabro loss test were used to evaluate the moisture sensitivity and durability of PA mixtures, and a staged ITT fatigue test was developed to investigate the damage evolutions under dry and wet conditions. Indirect tensile strength (ITS), fatigue life, indirect tensile resilience modulus (E), and durability decreased with the increment of moisture damage and loading cycles. The fatigue life is more sensitive to the moisture damage. The largest decrements in ITS and E were found in the first 3000 loading cycles, and PA mixtures tended to fail when the decrement exceeded 60%. Damage factors based on the ITS and E are proposed to predict the loading history of PA mixtures. The durability damage evolution and damage factors could fit an exponential model under dry conditions. Moisture had a significant influence and an acceleration function on the moisture damage evolution and durability damage evolution of PA mixtures. [ABSTRACT FROM AUTHOR]