Search

We have performed scanning tunneling microscopy (STM) and angle-resolved photoemission spectroscopy (ARPES) in Pb-deposited bilayer graphene (BLG) on the SiC(0001) substrate to investigate the dependence of the electronic structures on the Pb-deposition amount. We have observed that the Pb atoms form islands by STM and the π bands of the BLG shift toward the Fermi level by ARPES. This hole-doping-like energy shift is enhanced as the amount of Pb is increased, and we were able to tune the Dirac gap to the Fermi level by 4 ML deposition. Considering the band dispersion, we suggest that the hole-doping-like effect is related to the difference between the work functions of Pb islands and BLG/SiC; the work function of BLG/SiC is lower than that of Pb. Our results propose an easy way of band tuning for graphene with an appropriate selection of both the substrate and deposited material. [ABSTRACT FROM AUTHOR]

Inorganic polyphosphate [Poly(P)] is especially prevalent in osteoblasts. We tested the hypothesis that Poly(P) stimulates osteoblastic differentiation and polyphosphate metabolism for bone formation. The osteoblast-like cell line, MC 3T3-E1, was cultured with Poly(P), and gene expression was evaluated by real-time reverse-transcription polymerase chain-reaction. Phosphatase activity and extracellular matrix mineralization were also determined. The role of Poly(P) was assessed in a beagle dog alveolar bone regeneration model. Poly(P) increased osteocalcin, osterix, bone sialoprotein, and tissue non-specific alkaline phosphatase gene expression, with a high level of end-polyphosphatase activity, resulting in low-chain-length Poly(P), inorganic pyrophosphate, and inorganic phosphate production. MC3T3-E1 cells differentiated into mature osteoblasts and showed expression of ectonucleotide pyrophosphatase phosphodiesterase 1, while mouse progressive ankylosis gene expression remained unchanged. Promotion of alveolar bone regeneration was observed in Poly(P)-treated beagle dogs. These findings suggest that Poly(P) induces osteoblastic differentiation and bone mineralization, and acts as a resource for mineralization. [ABSTRACT FROM AUTHOR]

Inorganic polyphosphates [Poly(P)] are often distributed in osteoblasts. We undertook the present study to verify the hypothesis that Poly(P) stimulates osteoblasts and facilitates bone formation. The osteoblast-like cell line MC 3T3-E1 was cultured with Poly(P), and gene expression and potential mineralization were evaluated by reverse-transcription polymerase chain-reaction. Alkaline phosphatase activity, von Kossa staining, and resorption pit formation analyses were also determined. The potential role of Poly(P) in bone formation was assessed in a rat alveolar bone regeneration model. Poly(P) induced osteopontin, osteocalcin, collagen 1α, and osteoprotegerin expression and increased alkaline phosphatase activity in MC 3T3-E1 cells. Dentin slice pit formation decreased with mouse osteoblast and bone marrow macrophage co-cultivation in the presence of Poly(P). Promotion of alveolar bone regeneration was observed locally in Poly(P)-treated rats. These findings suggest that Poly(P) plays a role in osteoblastic differentiation, activation, and bone mineralization. Thus, local poly(P) delivery may have a therapeutic benefit in periodontal disease. [ABSTRACT FROM AUTHOR]

A technique for fabrication of gold nanowires on a Si(111) surface in ultrahigh vacuum and their electronic transport properties are presented. Gold wires with widths as small as 4 nm are produced by using a gold-coated piezoresistive cantilever in atomic force microscope contact mode. This technique allows patterns to be written at will. In situ electronic transport measurements of a gold wire as long as 7 μm and 4 nm wide show unambiguous metallic behavior. This fabrication method could become pivotal within the next generation of nanoscale microprocessors. © 2001 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The article offers information on high-speed AFM that accelerate the binding of agitoxin-2 to a K+ channel by induced fit . Topics discussed include Agitoxin-2 (AgTx2) from scorpion venom, which is a potent blocker of K+ channels; complicated mechanisms for study, such as induced fit or conformational selection; and binding dynamics of AgTx2 to the KcsA channel using high-speed atomic force microscopy.

The adhesive function of cell surface proteins can be visually assessed through direct observation; however, the underlying structures that mediate adhesion typically remain invisible at the nanoscale level. This hinders knowledge on the diversity of molecular architectures responsible for cell-cell adhesion. Drosophila E-cadherin (DE-cadherin), a classical cadherin with a unique domain structure, demonstrates adhesive function; however, it lacks a structural model that explains its adhesion mechanism. Here, we present a novel application of DNA origami technology to create a cell-free, flat environment in which full DE-cadherin ectodomains are anchored using SNAP-tags and biotin-streptavidin interactions. DNA origami was assembled into a 120 nm long block, bearing 5 or 14 biotin:streptavidin sites that were evenly spaced on one lateral face. DE-cadherin ectodomain fragments were attached via biotinylated SNAP-tags. These decorated DNA origami nanoblocks were subjected to transmission electron and high-speed atomic force microscopy, which revealed a hinge-like site that separated the membrane-distal and -proximal portions of the DE-cadherin ectodomain, suggesting a role in mechanical flexibility. We also observed interactions between DE-cadherin ectodomains via their membrane-distal portions on single DNA origami nanoblocks. We reconstituted an adhesion-like process via pairing DNA origami nanoblocks using DE-cadherin ectodomain interactions. Homophilic associations of functional DE-cadherin ectodomains between the paired DNA origami nanoblocks were visualized at the nanoscale, displaying strand-like molecular configurations, likely representing the extracellular cadherin repeats without regular arrays of structural elements. This study introduces a DNA origami-based platform for reconstituting and visualizing cadherin ectodomain interactions, with potential applications for a broader range of adhesion molecules., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Understanding the dynamic assembly process of amyloid β (Aβ) during fibril formation is essential for developing effective therapeutic strategies against Alzheimer's disease. Here, we employed high-speed atomic force microscopy to observe the growth of Aβ fibrils at the single-molecule level, focusing specifically on their interaction with anti-Aβ antibodies. Our findings show that fibril growth consists of intermittent periods of elongation and pausing, which are dictated by the alternating addition of Aβ monomers to protofilaments. We highlight the distinctive interaction of antibody 4396C, which specifically binds to the fibril ends in the paused state, suggesting a unique mechanism to hinder fibril elongation. Through real-time visualization of fibril growth and antibody interactions combined with molecular simulation, this study provides a refined understanding of Aβ assembly during fibril formation and suggests novel strategies for Alzheimer's therapy aimed at inhibiting the fibril elongation.

Understanding the structural changes and property alterations at the nanoscale and microscopic levels is critical to clarifying the deformation behavior and mechanical properties of polymer materials. Especially, in latex films composed of polymer nanoparticles, it is widely accepted that the remaining interfaces between microparticles in the film affect their brittleness. However, detailed information on nanoscale changes of latex films during deformation remains unclear due to technical difficulties in analyzing the microstructures under mechanical stress. In this study, we employed atomic force microscopy equipped with a uniaxial stretching device to visualize the surface structures of films composed of slightly cross-linked microparticles under elongation strain. The observations revealed that the latex film deforms in a nonaffine manner, which is attributed to the concurrent deformation of individual microparticles and the pull-out of interpenetration between them. Furthermore, by introducing a load-strain measurement mechanism to the stretching device, we compared the relationships between nanostructural changes, local property changes, and macroscopic deformation of microparticle-based films. The results suggest that loads are dominated by the deformation of microparticles and dissipate as the interpenetration of surface polymer chains between microparticles is pulled out.

In this study, the nanoscale structures of microparticle-based films are revealed by synchrotron small-angle X-ray scattering (SAXS) and all-atom molecular-dynamics (AA-MD) simulations. The microparticle-based films consisting of the simplest acrylate polymer microparticles are applied as a model because the films are formed without additives and organic solvents and exhibit high toughness properties. The characteristic interfacial thickness ( t inter ) obtained from the SAXS analysis reflects the mixing degree of polymer chains on the microparticle surface in the film. The cross-linking density of inner microparticles is found to be strongly correlated to not only several properties of individual microparticles, such as swelling ratio and radius of gyration, but also the t inter and toughness of the corresponding films. Therefore, the t inter and toughness values follow a linear relationship because the cross-linking restricts the mixing of polymer chains between their surfaces in the film, which is a unique feature of microparticle-based films. This characteristic also affects their deformation behavior observed by in situ SAXS during tensile testing and their density profiles calculated by AA-MD simulations. This work provides a general strategy for material design to control the physical properties and structures of their films for advanced applications, including volatile organic compound-free sustainable coatings and adhesives.

The marine bacterium Vibrio alginolyticus possesses a polar flagellum driven by a sodium ion flow. The main components of the flagellar motor are the stator and rotor. The C-ring and MS-ring, which are composed of FliG and FliF, respectively, are parts of the rotor. Here, we purified an MS-ring composed of FliF-FliG fusion proteins and solved the near-atomic resolution structure of the S-ring-the upper part of the MS-ring-using cryo-electron microscopy. This is the first report of an S-ring structure from Vibrio , whereas, previously, only those from Salmonella have been reported. The Vibrio S-ring structure reveals novel features compared with that of Salmonella , such as tilt angle differences of the RBM3 domain and the β-collar region, which contribute to the vertical arrangement of the upper part of the β-collar region despite the diversity in the RBM3 domain angles. Additionally, there is a decrease of the inter-subunit interaction between RBM3 domains, which influences the efficiency of the MS-ring formation in different bacterial species. Furthermore, although the inner-surface electrostatic properties of Vibrio and Salmonella S-rings are altered, the residues potentially interacting with other flagellar components, such as FliE and FlgB, are well structurally conserved in the Vibrio S-ring. These comparisons clarified the conserved and non-conserved structural features of the MS-ring across different species.IMPORTANCEUnderstanding the structure and function of the flagellar motor in bacterial species is essential for uncovering the mechanisms underlying bacterial motility and pathogenesis. Our study revealed the structure of the Vibrio S-ring, a part of its polar flagellar motor, and highlighted its unique features compared with the well-studied Salmonella S-ring. The observed differences in the inter-subunit interactions and in the tilt angles between the Vibrio and Salmonella S-rings highlighted the species-specific variations and the mechanism for the optimization of MS-ring formation in the flagellar assembly. By concentrating on the region where the S-ring and the rod proteins interact, we uncovered conserved residues essential for the interaction. Our research contributes to the advancement of bacterial flagellar biology., Competing Interests: The authors declare no conflict of interest.

In the previous study (Green Chem., 2023, 25, 3418), highly stretchable and mechanically tough poly(methyl acrylate) (pMA) microparticle-based elastomers can be formed by drying a microparticle-containing aqueous dispersion. This discovery has the potential to overcome the mechanical weakness of industrially produced aqueous latex films. However, in 3D-arranged particle films, structural complexity, such as the existence of defects, makes it difficult to clearly understand the relationship between the particle film structure and its mechanical properties. In this study, 2D-ordered pMA particle monolayers at the air/water interface of a Langmuir trough are prepared. Under high compression at the air/water interface, the microparticles contact their neighboring particles, and the resulting monolayers can be successfully transferred onto a solid substrate. The compression of the monolayer films is linked to an increase in the elastic modulus of the monolayer film on the solid substrate as evident from the local Young's modulus mapping using atomic force microscopy. Thus, pMA particle films with different mechanical properties can be created using a Langmuir trough., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Channelrhodopsins are microbial light-gated ion channels that can control the firing of neurons in response to light. Among several cation channelrhodopsins identified in Guillardia theta (GtCCRs), GtCCR4 has higher light sensitivity than typical channelrhodopsins. Furthermore, GtCCR4 shows superior properties as an optogenetic tool, such as minimal desensitization. Our structural analyses of GtCCR2 and GtCCR4 revealed that GtCCR4 has an outwardly bent transmembrane helix, resembling the conformation of activated G-protein-coupled receptors. Spectroscopic and electrophysiological comparisons suggested that this helix bend in GtCCR4 omits channel recovery time and contributes to high light sensitivity. An electrophysiological comparison of GtCCR4 and the well-characterized optogenetic tool ChRmine demonstrated that GtCCR4 has superior current continuity and action-potential spike generation with less invasiveness in neurons. We also identified highly active mutants of GtCCR4. These results shed light on the diverse structures and dynamics of microbial rhodopsins and demonstrate the strong optogenetic potential of GtCCR4., Competing Interests: Declaration of interests O.N. is a co-founder and scientific advisor for Curreio, Inc. This research was funded by Daiichi Sankyo Co., Ltd. S.H., S.S., S.P.T., and H.K. have a patent related to this work (U.S. Patent No. 12,030,917,　 Japan Patent No. 7492777)., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

In cells, proteins are synthesized, function, and degraded (dead). Protein synthesis (spring) is important for the life of proteins. However, how proteins die is equally important for organisms. Proteases are secreted from cells and used as nutrients to break down external proteins. Proteases degrade unwanted and harmful cellular proteins. In eukaryotes, a large enzyme complex called the proteasome is primarily responsible for cellular protein degradation. Prokaryotes, such as bacteria, have similar protein degradation systems. In this review, we describe the structure and function of the ClpXP complex in the degradation system, which is an ATP-dependent protease in bacterial cells, with a particular focus on ClpP., (© 2024 The Author(s). Genes to Cells published by Molecular Biology Society of Japan and John Wiley & Sons Australia, Ltd.)

Association-controllable hemoprotein assemblies were constructed from a fusion protein containing two c-type cytochrome units using 3D domain swapping. The hemoprotein assembly exhibited a dynamic exchange between cyclic and linear structures and could be regulated by carbon monoxide (CO) and imidazole binding.

Synaptopodin 2-like protein (SYNPO2L) is localized in the sarcomere of cardiomyocytes and is involved in heart morphogenesis. However, the molecular function of SYNPO2L in the heart is not fully understood. We investigated the interaction of SYNPO2L with sarcomeric α-actinin and actin filaments in cultured mouse cardiomyocytes. Immunofluorescence studies showed that SYNPO2L colocalized with α-actinin and actin filaments at the Z-discs of the sarcomere. Recombinant SYNPO2La or SYNPO2Lb caused a bundling of the actin filaments in the absence of α-actinin and enhanced the α-actinin-dependent formation of actin bundles. In addition, high-speed atomic force microscopy revealed that SYNPO2La directly bound to α-actinin via its globular ends. The interaction between α-actinin and SYNPO2La fixed the movements of the two proteins on the actin filaments. These results strongly suggest that SYNPO2L cooperates with α-actinin during actin bundle formation to facilitate sarcomere formation and maintenance.

The competition between polymer chain folding and aggregation is a critical structuring process that determines the physical properties of synthetic and biopolymers. However, supramolecular polymer systems that exhibit both processes have not yet been reported. We herein introduce a system in which folded supramolecular polymers spontaneously undergo interchain aggregation due to a rearrangement in internal molecular order, converting them into crystalline aggregates. These folded supramolecular polymers slowly crystallize over the course of half a day, due to their characteristic higher-order structures. However, the photoisomerization of the trans -azobenzene incorporated into the monomer to the cis isomer leads to unfolding of the polymer, accelerating the intrachain and interchain molecular ordering to a few hours. The intermediate structures visualized by AFM demonstrate that the unfolding is coupled with interchain aggregation.

Immunoglobulin G (IgG) molecules that bind antigens on the membrane of target cells spontaneously form hexameric rings, thus recruiting C1 to initiate the complement pathway. However, our previous report indicated that a mouse IgG mutant lacking the Cγ1 domain activates the pathway independently of antigen presence through its monomeric interaction with C1q via the CL domain, as well as Fc. In this study, we investigated the potential interaction between C1q and human CL isoforms. Quantitative single-molecule observations using high-speed atomic force microscopy revealed that human Cκ exhibited comparable C1q binding capabilities with its mouse counterpart, surpassing the Cλ types, which have a higher isoelectric point than the Cκ domains. Nuclear magnetic resonance and mutation experiments indicated that the human and mouse Cκ domains share a common primary binding site for C1q, centred on Glu194, a residue conserved in the Cκ domains but absent in the Cλ domains. Additionally, the Cγ1 domain, with its high isoelectric point, can cause electrostatic repulsion to the C1q head and impede the C1q-interaction adjustability of the Cκ domain in Fab. The removal of the Cγ1 domain is considered to eliminate these factors and thus promote Cκ interaction with C1q with the potential risk of uncontrolled activation of the complement pathway in vivo in the absence of antigen. However, this research underscores the presence of potential subsites in Fab for C1q binding, offering promising targets for antibody engineering to refine therapeutic antibody design., (© The Author(s) 2024. Published by Oxford University Press on behalf of The Japanese Society for Immunology.)

The honeycomb lattice is a fundamental two-dimensional (2D) network that gives rise to surprisingly rich electronic properties. While its expansion to 2D supramolecular assembly is conceptually appealing, its realization is not straightforward because of weak intermolecular coupling and the strong influence of a supporting substrate. Here, we show that the application of a triptycene derivative with phenazine moieties, Trip-Phz, solves this problem due to its strong intermolecular π-π pancake bonding and nonplanar geometry. Our scanning tunneling microscopy (STM) measurements demonstrate that Trip-Phz molecules self-assemble on a Ag(111) surface to form chiral and commensurate honeycomb lattices. Electronically, the network can be viewed as a hybrid of honeycomb and kagome lattices. The Dirac and flat bands predicted by a simple tight-binding model are reproduced by total density functional theory (DFT) calculations, highlighting the protection of the molecular bands from the Ag(111) substrate. The present work offers a rational route for creating chiral 2D supramolecules that can simultaneously accommodate pristine Dirac and flat bands.

Despite the potential of lignocellulose in manufacturing value-added chemicals and biofuels, its efficient biotechnological conversion by enzymatic hydrolysis still poses major challenges. The complex interplay between xylan, cellulose, and lignin in fibrous materials makes it difficult to assess underlying physico- and biochemical mechanisms. Here, we reduce the complexity of the system by creating matrices of cellulose, xylan, and lignin, which consists of a cellulose base layer and xylan/lignin domains. We follow enzymatic degradation using an endoxylanase by high-speed atomic force microscopy and surface plasmon resonance spectroscopy to obtain morphological and kinetic data. Fastest reaction kinetics were observed at low lignin contents, which were related to the different swelling capacities of xylan. We demonstrate that the complex processes taking place at the interfaces of lignin and xylan in the presence of enzymes can be monitored in real time, providing a future platform for observing phenomena relevant to fiber-based systems.

Prions, the misfolding form of prion proteins, are contagious proteinaceous macromolecules. Recent studies have shown that infectious prion fibrils formed in the brain and non-infectious fibrils formed from recombinant prion protein in a partially denaturing condition have distinct structures. The amyloid core of the in vitro-prepared non-infectious fibrils starts at about residue 160, while that of infectious prion fibrils formed in the brain involves a longer sequence (residues ∼90-230) of structural conversion. The C-terminal truncated prion protein PrP(23-144) can form infectious fibrils under certain conditions and cause disease in animals. In this study, we used cryogenic electron microscopy (cryo-EM) to resolve the structure of hamster sHaPrP(23-144) fibrils prepared at pH 3.7. This 2.88 Å cryo-EM structure has an amyloid core covering residues 94-144. It comprises two protofilaments, each containing five β-strands arranged as a long hairpin plus an N-terminal β-strand. This N-terminal β-strand resides in a positively charged cluster region (named PCC2; sequence 96-111), which interacts with the turn region of the opposite protofilaments' hairpin to stabilize the fibril structure. Interestingly, this sHaPrP(23-144) fibril structure differs from a recently reported structure formed by the human or mouse counterpart at pH 6.5. Moreover, sHaPrP(23-144) fibrils have many structural features in common with infectious prions. Whether this structure is infectious remains to be determined. More importantly, the sHaPrP(23-144) structure is different from the sHaPrP(108-144) fibrils prepared in the same fibrillization buffer, indicating that the N-terminal disordered region, possibly the positively charged cluster, influences the misfolding pathway of the prion protein., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Bacteria in the oral microbiome are poorly identified owing to the lack of established culture methods for them. Thus, this study aimed to use culture-free analysis techniques, including bacterial single-cell genome sequencing, to identify bacterial species and investigate gene distribution in saliva. Saliva samples from the same individual were classified as inactivated or viable and then analyzed using 16S rRNA sequencing, metagenomic shotgun sequencing, and bacterial single-cell sequencing. The results of 16S rRNA sequencing revealed similar microbiota structures in both samples, with Streptococcus being the predominant genus. Metagenomic shotgun sequencing showed that approximately 80 % of the DNA in the samples was of non-bacterial origin, whereas single-cell sequencing showed an average contamination rate of 10.4 % per genome. Single-cell sequencing also yielded genome sequences for 43 out of 48 wells for the inactivated samples and 45 out of 48 wells for the viable samples. With respect to resistance genes, four out of 88 isolates carried cfxA , which encodes a β-lactamase, and four isolates carried erythromycin resistance genes. Tetracycline resistance genes were found in nine bacteria. Metagenomic shotgun sequencing provided complete sequences of cfxA , ermF , and ermX , whereas other resistance genes, such as tetQ and tetM , were detected as fragments. In addition, virulence factors from Streptococcus pneumoniae were the most common, with 13 genes detected. Our average nucleotide identity analysis also suggested five single-cell-isolated bacteria as potential novel species. These data would contribute to expanding the oral microbiome data resource., Competing Interests: The authors declare that they have no competing interests., (© 2024 The Authors.)

The flagellar type III secretion system (fT3SS) switches substrate specificity from rod-hook-type to filament-type upon hook completion, terminating hook assembly and initiating filament assembly. The C-terminal cytoplasmic domain of FlhA (FlhA C ) forms a homo-nonameric ring and is directly involved in substrate recognition, allowing the fT3SS to coordinate flagellar protein export with assembly. The highly conserved GYXLI motif (residues 368-372) of FlhA C induces dynamic domain motions of FlhA C required for efficient and robust flagellar protein export by the fT3SS, but it remains unknown whether this motif is also important for ordered protein export by the fT3SS. Here we analyzed two GYXLI mutants, flhA(GAAAA) and flhA(GGGGG), and provide evidence suggesting that the GYXLI motif in FlhA C requires the flagellar ATPase complex not only to efficiently remodel the FlhA C ring structure for the substrate specificity switching but also to correct substrate recognition errors that occur during flagellar assembly., (© 2024. The Author(s).)

High-speed atomic force microscopy (HS-AFM) is an indispensable technique in the field of biology owing to its imaging capability with high spatiotemporal resolution. Furthermore, recent developments established tip-scan stand-alone HS-AFM combined with an optical microscope, drastically improving its versatility. It has considerable potential to contribute to not only biology but also various research fields. A great candidate is a photoactive material, such as an azo-polymer, which is important for optical applications because of its unique nanoscale motion under light irradiation. Here, we demonstrate the in situ observation of nanoscale azo-polymer motion by combining tip-scan HS-AFM with an optical system, allowing HS-AFM observations precisely aligned with a focused laser position. We observed the dynamic evolution of unique morphologies in azo-polymer films. Moreover, real-time topographic line profile analyses facilitated precise investigations of the morphological changes. This important demonstration would pave the way for the application of HS-AFM in a wide range of research fields.

TAT rhodopsin, a microbial rhodopsin found in the marine SAR11 bacterium HIMB114, uniquely possesses a Thr-Ala-Thr (TAT) motif in the third transmembrane helix. Because of a low pK a value of the retinal Schiff base (RSB), TAT rhodopsin exhibits both a visible light-absorbing state with the protonated RSB and a UV-absorbing state with the deprotonated RSB at a neutral pH. The UV-absorbing state, in contrast to the visible light-absorbing one, converts to a long-lived photointermediate upon light absorption, implying that TAT rhodopsin functions as a pH-dependent light sensor. Despite detailed biophysical characterization and mechanistic studies on the TAT rhodopsin, it has been unknown whether other proteins with similarly unusual features exist. Here, we identified several new rhodopsin genes homologous to the TAT rhodopsin of HIMB114 (TAT HIMB ) from metagenomic data. Based on the absorption spectra of expressed proteins from these genes with visible and UV peaks similar to that of TAT HIMB , they were classified as Twin-peaked Rhodopsin (TwR) family. TwR genes form a gene cluster with a set of 13 ORFs conserved in subclade IIIa of SAR11 bacteria. A glutamic acid in the second transmembrane helix, Glu54, is conserved in all of the TwRs. We investigated E54Q mutants of two TwRs and revealed that Glu54 plays critical roles in regulating the RSB pK a , oligomer formation, and the efficient photoreaction of the UV-absorbing state. The discovery of novel TwRs enables us to study the universality and individuality of the characteristics revealed so far in the original TAT HIMB and contributes to further studies on mechanisms of unique properties of TwRs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

High-speed atomic force microscopy (HS-AFM) is now a widely used technique to study the dynamics of single biomolecules and complex structures. In the past, it has mainly been used to capture surface topography as structural analysis, leading to important discoveries not attainable by other methods. Similar to conventional AFM, the scope of HS-AFM was recently expanded to encompass quantities beyond topography, such as the measurement of mechanical properties. This review delves into various methodologies for assessing mechanical properties, ranging from semi-quantitative approaches to precise force measurements and their corresponding sample responses. We will focus on the application to single proteins such as bridging integrator-1, ion channels such as Piezo1, complex structures such as microtubules and supramolecular fibers. In all these examples, the unique combination of quantifiable force application and high spatiotemporal resolution allows to unravel mechanisms that cannot be investigated by conventional means., (© The Author(s) 2023. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Processive movement is the key reaction for crystalline polymer degradation by enzyme. Product release is an important phenomenon in resetting the moving cycle, but how it affects chitinase kinetics was unknown. Therefore, we investigated the effect of diacetyl chitobiose (C2) on the biochemical activity and movement of chitinase A from Serratia marcescens (SmChiA). The apparent inhibition constant of C2 on crystalline chitin degradation of SmChiA was 159 μM. The binding position of C2 obtained by X-ray crystallography was at subsite +1, +2 and Trp275 interact with C2 at subsite +1. This binding state is consistent with the competitive inhibition obtained by biochemical analysis. The apparent inhibition constant of C2 on the moving velocity of high-speed (HS) AFM observations was 330 μM, which is close to the biochemical results, indicating that the main factor in crystalline chitin degradation is also the decrease in degradation activity due to inhibition of processive movement. The Trp275 is a key residue for making a sliding intermediate complex. SmChiA W275A showed weaker activity and affinity than WT against crystalline chitin because it is less processive than WT. In addition, biochemical apparent inhibition constant for C2 of SmChiA W275A was 45.6 μM. W275A mutant showed stronger C2 inhibition than WT even though the C2 binding affinity is weaker than WT. This result indicated that Trp275 is important for the interaction at subsite +1, but also important for making sliding intermediate complex and physically block the rebinding of C2 on the catalytic site for crystalline chitin degradation., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

This study employed high-speed atomic force microscopy to quantitatively analyze the interactions between therapeutic antibodies and Fcγ receptors (FcγRs). Antibodies are essential components of the immune system and are integral to biopharmaceuticals. The focus of this study was on immunoglobulin G molecules, which are crucial for antigen binding via the Fab segments and cytotoxic functions through their Fc portions. We conducted real-time, label-free observations of the interactions of rituximab and mogamulizumab with the recombinant FcγRIIIa and FcγRIIa. The dwell times of FcγR binding were measured at the single-molecule level, which revealed an extended interaction duration of mogamulizumab with FcγRIIIa compared with that of rituximab. This is linked to enhanced antibody-dependent cellular cytotoxicity that is attributed to the absence of the core fucosylation of Fc-linked N-glycan. This study also emphasizes the crucial role of the Fab segments in the interaction with FcγRIIa as well as that with FcγRIIIa. This approach provided quantitative insight into therapeutic antibody interactions and exemplified kinetic proofreading, where cellular discrimination relies on ligand residence times. Observing the dwell times of antibodies on the effector molecules has emerged as a robust indicator of therapeutic antibody efficacy. Ultimately, these findings pave the way for the development of refined therapeutic antibodies with tailored interactions with specific FcγRs. This research contributes to the advancement of biopharmaceutical antibody design and optimizing antibody-based treatments for enhanced efficacy and precision.

Proteins in the cells are born (synthesized), work, and die (decomposed). In the life of a protein, its birth is obviously important, but how it dies is equally important in living organisms. Proteases secreted into the outside of cells are used to decompose the external proteins and the degradation products are taken as the nutrients. On the other hand, there are also proteases that decompose unnecessary or harmful proteins which are generated in the cells. In eukaryotes, a large enzyme complex called the proteasome is primarily responsible for degradation of such proteins. Bacteria, which are prokaryotes, have a similar system as the proteasome. We would like to explain the bacterial degradation system of proteins or the death of proteins, which is performed by ATP-dependent protease Clp, with a particular focus on the ClpXP complex, and with an aspect as a target for antibiotics against bacteria.