Search

Histone lactylation is a metabolic stress‐related histone modification. However, the role of histone lactylation in the development of sepsis‐associated acute kidney injury (SA‐AKI) remains unclear. Here, histone H3K18 lactylation (H3K18la) is elevated in SA‐AKI, which is reported in this study. Furthermore, this lactate‐dependent histone modification is enriched at the promoter of Ras homolog gene family member A (RhoA) and positively correlated with the transcription. Correction of abnormal lactate levels resulted in a reversal of abnormal histone lactylation at the promoter of RhoA. Examination of related mechanism revealed that histone lactylation promoted the RhoA/Rho‐associated protein kinase (ROCK) /Ezrin signaling, the activation of nuclear factor‐κB (NF‐κB), inflammation, cell apoptosis, and aggravated renal dysfunction. In addition, Ezrin can undergo lactylation modification. Multiple lactylation sites are identified in Ezrin and confirmed that lactylation mainly occurred at the K263 site. The role of histone lactylation is revealed in SA‐AKI and reportes a novel post‐translational modification in Ezrin. Its potential role in regulating inflammatory metabolic adaptation of renal proximal tubule epithelial cells is also elucidated. The results provide novel insights into the epigenetic regulation of the onset of SA‐AKI. [ABSTRACT FROM AUTHOR]

Antiphospholipid syndrome (APS) is characterized by thrombus formation, poor pregnancy outcomes, and a proinflammatory response. H3K4me3‐related monocytes activation are key regulators of APS pathogenesis. Therefore, H3K4me3 CUT&Tag and ATAC‐seq are performed to examine the epigenetic profiles. The results indicate that the H3K4me3 signal and chromatin accessibility at the FOXJ2 promoter are enhanced in an in vitro monocyte model by stimulation with β2GPI/anti‐β2GPI, which mimics APS, and decreases after OICR‐9429 administration. Furthermore, FOXJ2 is highly expressed in patients with primary APS (PAPS) and is the highest in patients with triple‐positive antiphospholipid antibodies (aPLs). Mechanistically, FOXJ2 directly binds to the SLAMF8 promoter and activates SLAMF8 transcription. SLAMF8 further interacts with TREM1 to stimulate TLR4/NF‐κB signaling and prohibit autophagy. Knockdown of FOXJ2, SLAMF8, or TREM1 blocks TLR4/NF‐κB and provokes autophagy, subsequently inhibiting the release of inflammatory and thrombotic indicators. A mouse model of vascular APS is established via β2GPI intraperitoneal injection, and the results suggest that OICR‐9429 administration attenuates the inflammatory response and thrombus formation by inactivating FOXJ2/SLAMF8/TREM1 signaling. These findings highlight the overexpression of H3K4me3‐mediated FOXJ2 in APS, which consequently accelerates APS pathogenesis by triggering inflammation and thrombosis via boosting the SLAMF8/TREM1 axis. Therefore, OICR‐9429 is a promising candidate drug for APS therapy. [ABSTRACT FROM AUTHOR]

Background: Alterations of the trimethylation of histone 3 lysine 4 (H3K4me3) mark in monocytes are implicated in the development of autoimmune diseases. Therefore, the purpose of our study was to elucidate the role of H3K4me3‐mediated epigenetics in the pathogenesis of antiphospholipid syndrome (APS). Methods: H3K4me3 Cleavage Under Targets and Tagmentation and Assay for Transposase‐Accessible Chromatin were performed to determine the epigenetic profiles. Luciferase reporter assay, RNA immunoprecipitation, RNA pull‐down, co‐immunoprecipitation and chromatin immunoprecipitation were performed for mechanistic studies. Transmission electron microscopy and propidium iodide staining confirmed cell pyroptosis. Primary monocytes from patients with primary APS (PAPS) and healthy donors were utilised to test the levels of key molecules. A mouse model mimicked APS was constructed with beta2‐glycoprotein I (β2GPI) injection. Blood velocity was detected using murine Doppler ultrasound. Results: H3K4me3 signal and open chromatin at the ARID5B promoter were increased in an in vitro model of APS. The epigenetic factor ARID5B directly activated LINC01128 transcription at its promoter. LINC01128 promoted the formation of the BTF3/STAT3 complex to enhance STAT3 phosphorylation. Activated STAT3 interacted with the NLRP3 promoter and subsequently stimulated pyroptosis and apoptosis. ARID5B or BTF3 depletion compensated for LINC01128‐induced pyroptosis and apoptosis by inhibiting STAT3 phosphorylation. In mice with APS, β2GPI exposure elevated the levels of key proteins of pyroptosis and apoptosis pathways in bone marrow‐derived monocytes, reduced the blood velocity of the ascending aorta, increased the thrombus size of the carotid artery, and promoted the release of interleukin (IL)‐18, IL‐1β and tissue factor. Patients with PAPS had the high‐expressed ARID5B and LINC01128, especially those with triple positivity for antiphospholipid antibodies. Moreover, there was a positive correlation between ARID5B and LINC01128 expression. Conclusion: This study indicated that ARID5B/LINC01128 was synergistically upregulated in APS, and they aggravated disease pathogenesis by enhancing the formation of the BTF3/STAT3 complex and boosting p‐STAT3‐mediated pyroptosis and apoptosis, thereby providing candidate therapeutic targets for APS. Highlights: The H3K4me3 mark and chromatin accessibility at the ARID5B promoter are increased in vitro model mimicked APS.ARID5B‐mediated LINC01128 induces pyroptosis and apoptosis via p‐STAT3 by binding to BTF3.ARID5B is high‐ expressed in patients with primary APS and positively correlated with LINC01128 expression.OICR‐9429 treatment mitigates pyroptosis and related inflammation in vivo and in vitro models mimicked APS. [ABSTRACT FROM AUTHOR]

Based on its good water solubility, temperature resistance and environmental protection, oligosaccharides are widely used in food and beverage, baking and medical care. In view of the poor lubrication performance of drilling fluid in ultradeep wells, long horizontal wells and highly deviated wells, and the problems of environmental protection and temperature resistance faced by drilling fluid lubricants, its application is limited. Therefore, in order to reduce its limitations and improve its application, it is necessary to study oligosaccharides. Using vegetable gum rich in oligosaccharides as raw materials, oligosaccharide CQ01 high-performance lubricant can be developed, and its action efficiency in drilling fluid can be experimentally investigated. High performance drilling fluid lubricant meeting the requirements of environmental protection and drilling engineering can be developed, and its lubrication performance, temperature resistance and compatibility can be evaluated in laboratory experiments. The results show that oligosaccharide CQ01 has multiple effects of increasing viscosity and cutting, reducing filtration and improving the lubricating performance of drilling fluid. CQ01 lubricating fluid with low content of oligosaccharide has good adaptability to drilling bentonite. The lubrication mechanism of oligosaccharide CQ01 is that the hydrophilic group (- OH) in oligosaccharide CQ01 molecule is adsorbed on the borehole wall rock surface or drilling cuttings surface to form a chemical adsorption film, resulting in the friction surface being separated by the chemical adsorption film to play the role of lubrication.

In this paper, a series of porous hierarchical Mg/Al layered double hydroxides (named as LDH, TTAC-MgAl-LDH, CTAC-MgAl-LDH, and OTAC-MgAl-LDH) was synthesized by a simple green hydrothermal method using wormlike micelles formed by salicylic acid and surfactants with different carbon chain lengths (0, 14, 16, and 18) as soft templates. BET, XRD, FTIR, TG, and SEM characterizations were carried out in order to investigate the structure and properties of the prepared materials. The results showed that the porous hierarchical CTAC-MgAl-LDH had a large specific surface area and multiple pore size distributions which could effectively increase the reaction area and allow better absorption capability. Benefiting from the unique architecture, CTAC-MgAl-LDH exhibited a large adsorption capacity for sulfonated lignite (231.70 mg/g) at 25 °C and a pH of 7, which outperformed the traditional LDH (86.05 mg/g), TTAC-MgAl-LDH (108.15 mg/g), and OTAC-MgAl-LDH (110.51 mg/g). The adsorption process of sulfonated lignite followed the pseudo-second-order kinetics model and conformed the Freundlich isotherm model with spontaneous heat absorption, which revealed that electrostatic adsorption and ion exchange were the main mechanisms of action for the adsorption. In addition, CTAC-MgAl-LDH showed a satisfactory long-time stability and its adsorption capacities were still as high as 198.64 mg/g after two adsorption cycles. [ABSTRACT FROM AUTHOR]

A biomimetic hierarchical membrane consisting of ZIF-8 and MXene with controllable morphology could be fabricated by the facile electrochemical deposition method, well-realizing Li+/Mg2+ sieving. This membrane could work stably in real brine with perm-selectivity of Li+/Mg2+ up to 47.4. [ABSTRACT FROM AUTHOR]

In order to solve the problem of poor dispersion and stability of mixed metal hydroxide (MMH), a kind of mixed metal hydroxide-like compound (MMHlc) gel was synthesized for use as the base mud in drilling fluid instead of bentonite gel. Na2CO3, Na2SiO3, and C17H33CO2Na were used as precipitants to form MMHlc with larger interlayer spacing and smaller particle size. MMHlc was synthesized by the coprecipitation method at 25 °C with a metal molar ratio of Mg:Al:Fe = 3:1:1. The performance evaluation of the treated drilling fluid showed that MMHlc (S2) synthesized using Na2SiO3 as the precipitant had the characteristics of low viscosity, low filtration, and a high dynamic plastic ratio at 25 °C, which fully met the requirements of oil field application, and it maintained its excellent properties after being aged at 250 °C for 16 h. Linear expansion and rolling recovery experiments showed that the S2 sample had excellent rheological properties and good inhibition. X-ray diffraction and FT-IR experiments showed that S2 had the most complete crystal structure, its interlayer distance was large, and its ion exchange capacity was strong. The thermogravimetric experiment showed that the S2 crystal was stable and the temperature resistance of the crystal could reach 340 °C. Zeta potential, particle size analysis, SEM, and TEM results showed that S2 is a nanomaterial with a complete morphology and uniform distribution. The drilling fluid of this formula had the characteristics of low viscosity, low filtration loss, and a high dynamic plastic ratio, and it met the conditions for oil field application. Considering these results, the new MMH prepared by our research institute is a drilling fluid material that can be used at ultra-high temperatures and can provide important support for drilling ultra-deep wells. [ABSTRACT FROM AUTHOR]

Nanofluidic reverse electrodialysis provides an attractive way to harvest osmotic energy. However, most attention was paid to monotonous membrane structure optimization to promote selective ion transport, while the role of external fields and relevant mechanisms are rarely explored. Here, we demonstrate a Kevlar‐toughened tungsten disulfide (WS2) composite membrane with bioinspired serosa‐mimetic structures as an efficient osmotic energy generator coupling light. As a result, the output power could be up to 16.43 W m−2 under irradiation, outperforming traditional two‐dimensional (2D) membranes. Both the experiment and simulation uncover that the generated photothermal and photoelectronic effects could synergistically promote the confined ion transport process. In addition, this membrane also possesses great anti‐fouling properties, endowing its practical application. This work paves new avenues for sustainable power generation by coupling solar energy. [ABSTRACT FROM AUTHOR]

Access to uranium resources is critical to the sustainable development of nuclear energy. The ocean contains abundant uranium resources, but the marine biological pollution and the low concentration of uranium make it a giant challenge to extract uranium from seawater. On the foundation of selective uranium adsorption using high uranium‐affinity groups, realizing the external‐field improved uranium capture without extra energy consumption is highly attractive. A solar thermal collector with 3D ion‐transport networks based on environmentally friendly biomass adsorption material is reported, which contains antibacterial adsorption ligands and photothermal graphene oxide. The antibacterial ability through an easy one‐step reaction and the fast mass transfer caused by photothermal conversion collaboratively improve the original adsorption capacity of the hydrogel by 46.7%, reaching 9.18 mg g−1 after contact with natural seawater for 14 days. This study provides a universal strategy for the design of physical‐fields‐enhanced hydrogel adsorbents. [ABSTRACT FROM AUTHOR]

Up to 20% of all business‐to‐consumer deliveries fail on the first attempt. Failed deliveries not only carry cost implications but also incur damage to retailers' brand reputation. Despite its economic significance, research has paid little attention to delivery attempt as an operational outcome or seldom accounted for its effects in routing models. This is partly due to the many factors that can influence delivery outcomes. We address this knowledge gap by first demonstrating that failed delivery attempts can be reasonably predicted using common routing, demand, environmental, and market attributes at both the individual package and route levels. For model‐building, we use transaction data from an e‐commerce retailer in South America. We then explore the value of accounting for failed delivery attempts in routing models. We propose a two‐stage greedy algorithm for solving large problem instances. Our analysis indicates that not accounting for the probability of failed attempts in routing models may create a significant downward bias in the total cost of delivery. The analysis also suggests that manipulating the sequence in which packages in a route are delivered can be a cost‐efficient lever that firms can employ at almost zero cost to profoundly affect delivery outcomes. We replicate the prediction model to a new sample from a delivery company in Singapore and calibrate it for a randomized field experiment to validate our algorithm's performance. Packages and drivers are randomly assigned to either our algorithm or the focal company's existing algorithm. Results suggest that our algorithm, on average, reduces the share of failed delivery attempts by 10% and the total cost of delivery by $13 per route. We further propose drivers' discretionary work effort and the goal‐gradient hypothesis as a mechanism for the efficacy of our algorithm. Controlling for time of day and other fixed effects, we empirically find that packages assigned to slots later in the route tend to have a lower failure rate because drivers display a higher degree of discretionary work effort toward the end of a route. Our approach can be applied to other firms' last‐mile delivery operations to improve their delivery execution. [ABSTRACT FROM AUTHOR]

In the past two years, several horizontal wells with ultra-long horizontal intervals were completed in Changqing oil and gas field. The longest horizon interval reached 4466 m, which set a record of the longest onshore horizontal well in Asia. There were a lot of difficulties such as high friction, mudstone collapse, and sand carrying that puzzled the drilling of wells with ultra-long horizontal intervals. To solve these problems, some key treatment agents were screened to form a novel water-based drilling fluid system (CQSP-RH). The yield point and extreme pressure lubrication coefficient of the novel system were 18 Pa and 0.058, respectively. The filtrate volume of the novel system was only 1.9 mL at room temperature and was 12 mL at 120 °C. When the cuttings were rolled for 16 h at 120 °C, the primary recovery of them could reach 98.64%. Subsequently, the novel system was applied to wells with ultra-long horizontal intervals. The friction resistance between drilling tools and sidewall was controlled within 500 KN; the solid contents of drilling fluid was controlled within 10%. The results proved that the novel system have superb properties and tremendous potential to drill deeper horizontal wells. [ABSTRACT FROM AUTHOR]

Polyacrylamide and its derivatives are commonly used as viscosity enhancers in water‐based drilling fluids, but they have limitations in terms of salt resistance and temperature resistance. In this study, a novel cationic functional monomer, 4‐allylaminocarbonyl‐1‐dodecylpyridinium bromide, was introduced into the molecular chains of an acrylamide and acrylic acid copolymer in order to improve its temperature resistance and salt tolerance. Results showed that the apparent viscosity of a 2000 mg/L copolymer solution was 440.4 mPa s at a shear rate of 7.34 s−1, decreasing to 23.5 mPa s at 510 s−1 before recovering to 49.2 mPa s when the shear rate returned to 170 s−1. After 16 h of aging at 120°C, a brine drilling fluid containing 1% of the copolymer showed an apparent viscosity retention rate of 70%, likely due to the formation of a stable net structure between the copolymer's molecular chains and clay particles. These results suggest that the copolymer could be an excellent candidate for use as a viscosity enhancer in drilling fluids. [ABSTRACT FROM AUTHOR]

Iron overloads osteoporosis mainly occurs to postmenopausal women and people requiring repeated blood transfusions. Iron overload increases the activity of osteoclasts and decreases the activity of osteoblasts, leading to the occurrence of osteoporosis. Conventional treatment options include calcium supplements and iron chelators. However, simple calcium supplementation is not effective, and it does not have a good therapeutic effect. Oxidative stress is one of the triggers for osteoporosis. Therefore, the study focuses on the antioxidant aspect of osteoporosis treatment. The present work revealed that antioxidant carboxymethyl chitosan-based carbon dots (AOCDs) can effectively treat iron overload osteoporosis. More interestingly, the functional modification of AOCDs by doping calcium gluconate (AOCDs:Ca) is superior to the use of any single component. AOCDs:Ca have the dual function of antioxidant and calcium supplement. AOCDs:Ca effectively improve the bioavailability of calcium and achieve ultra-low concentration calcium supplement for the treatment of iron-induced osteoporosis in zebrafish. [ABSTRACT FROM AUTHOR]

The cause of magmatic tempo in an active plate margin remains controversial, partly due to lack of structural analysis. During 130–105 Ma, the magmatism in the South China Block (SCB) was significantly reduced (lull) and restricted around the Changle‐Nan'ao Belt (CNB) while the magmatism was highly active (flare‐up) in North China. For unveiling the tectonic role on magmatism, a multidisciplinary study including field and microscopic structural observations, magnetic fabric measurement (AMS), and zircon/monazite dating was conducted on the plutons with oriented minerals in the CNB. Structural analysis and AMS results show a highly clustered NE‐striking vertical foliation developed during the emplacement indicating a syn‐emplacement NW‐SE shortening regime. The geochronology results confirm that the emplacement occurred during 130–105 Ma. Regional geologic correlation indicates that the collision between the Dangerous Grounds‐West Philippines Block and SCB was responsible for this shortening regime. The collected depleted zircon εHf(t) data suggest that a possible collision‐triggered slab break‐off caused the syn‐collisional magmatic activity around the CNB. This study shows that the magmatic lull in the SCB was coeval with a crustal shortening regime due to the arrival of a microcontinent carried by the subduction slab, while the magmatic flare‐up was coeval with an extensional regime due to the subduction roll‐back and retreat as evidenced by the Cretaceous evolution of the SCB before and after the collision and that of North China which is unaffected by the collision. The cause of magmatic tempo in the continental margin is largely due to the tectonic evolution of underlain subduction slabs. Plain Language Summary: Magmatic activity is closely connected to human life as it provides us with useful metals, releases greenhouse gases, triggers natural hazards. It is necessary to explore what controls a magmatic activity. Several previous studies considered that a shortening regime with thickened crust causes strong magmatism (flare‐up). The South China Block (SCB) featured by alternating magmatic flare‐up and lulls, provides an appropriate research target to test this hypothesis. During the Cretaceous, the SCB was dominated by an extensional regime caused by the Paleo‐Pacific oceanic slab subduction. However, our structural analyses on the SCB document a shortening regime caused by the collision between the SCB and a microcontinent carried by the Paleo‐Pacific oceanic slab in the period of the Cretaceous. During the collision, the SCB was generally featured by a magmatic lull, although magmatic activity was only observed around the Changle‐Nan'ao Belt, probably caused by the break‐off of the subducted Paleo‐Pacific oceanic slab. Before and after the collision, the extensional regime caused by Paleo‐Pacific oceanic slab subduction was coeval with magmatic flare‐up. This study questions the previous claims and proposes that the tectonic evolution of the subducting slab may control the magmatic flare‐up and lull in the overlain active continental margin. Key Points: The 130–105 Ma syn‐tectonic plutons intruded the Changle‐Nan'ao Belt in a NW‐SE shortening regime caused by a microcontinent collisionThe shortening/extension regimes were coeval with magmatic lull/flare‐up in the East Asia Continental Margin during the CretaceousThe collision causing break‐off can account for the plutonism in the Changle‐Nan'ao Belt during the magmatic lull of the South China Block [ABSTRACT FROM AUTHOR]

Solid-free drilling fluid has more advantages as a new type of drilling fluid compared with traditional drilling fluid, such as improving drilling efficiency, protecting oil and not having clay particles clog the oil and gas layer. In this study, Zn/Cu/Fe-doped magnesium–aluminum hydroxide (Mg-Al MMH) was prepared using the co-precipitation method and evaluated in solid-free drilling fluid. The inhibition mechanism of synthesized hydroxide was analyzed by X-ray diffraction, laser particle-size analysis and thermogravimetric analysis. The samples were directly used as drilling fluid base muds for performance evaluation. The results showed that the linear expansion rate of 4% M6-Fe was only 12.32% at room temperature within 2 h, that the linear expansion rate was 20.28% at 90 °C and that the anti-swelling rate was 81.16% at room temperature, indicating that it has a strong inhibition ability at both room temperature and at high temperatures. Meanwhile, the possibility of multi-mixed metal hydroxide as a drilling fluid base mud is discussed in this study. We found that 4% M6-Fe exhibited low viscosity, a high YP/PV ratio and high temperature resistance, and its apparent viscosity retention rate reached 100% rolled at 200 °C for 16 h, with a YP/PV ratio of 2.33. [ABSTRACT FROM AUTHOR]