Search

High‐performance thin‐film transistors (TFTs) integrated circuits (ICs) have become increasingly necessary to meet the emerging demands such as healthcare, edge computing, and the Internet of Things, etc. This article aims to point out the potential development trends and bottlenecks of TFT ICs, enhancing their performance in terms of electronic performance, stability, consistency, CMOS design, and manufacturing capability. Basic device structures and overall metrics of TFT ICs are explored, as well as their superiority compared to silicon‐based ultrathin chips. Hydrogenated amorphous silicon, low‐temperature polycrystalline silicon, and amorphous oxide semiconductors are widely used in displays due to their ability to be deposited on large areas at low processing temperatures and low cost, and are validated in many prototypes for TFT ICs. Their conduction mechanisms, process flows, performance evaluation, and recent advances are comprehensively viewed. In addition, the potential of emerging low‐dimensional materials as next‐generation channel materials is discussed, along with their limitations and progress in this field. Finally, the major challenges in manufacturing high‐performance TFT ICs and future perspectives are summarized. [ABSTRACT FROM AUTHOR]

Abstract Treating an abdominal aortic aneurysm (AAA) with a stent graft (SG) and a multilayer stent (MS) is a key technology in isolating flow fields. Clinically, dual stents (an SG in the proximal and an MS in the distal of AAA) are used for treatment of AAA, but only a few studies have examined the relationship between SG coverage and treatment effects. Through numerical simulation of the hemodynamics after SG and MS implantation, the SG coverage and position were simulated at 0% (0 mm), 25% (13.75 mm), 50% (27.5 mm), and 75% (41.25 mm). With increasing SG coverage, the pressure on the aneurysm sac wall and the flow of branch vessels gradually decreased, and the lower wall shear stress (WSS) gradually increased. The changes in pressure, lower WSS, and the mass flow rate of the branch vessels did not change significantly. The coverage of the SG has a nonsignificant effect on hemodynamics in the treatment of AAA; the implantation position need not be very precise. This research can provide theoretic support for clinicians’ decision-making.

Two‐dimensional material‐based field‐effect transistors (2DM‐FETs) are playing a revolutionary role in electronic devices. However, before electronic design automation (EDA) for 2DM‐FETs can be achieved, it remains necessary to determine how to incorporate contact transports into model. Reported methods compromise between physical intelligibility and model compactness due to the heterojunction nature. To address this, quasi‐Fermi‐level phase space theory (QFLPS) is generalized to incorporate contact transports using the Landauer formula. It turns out that the Landauer‐QFLPS model effectively overcomes the issue of concern. The proposed new formula can describe 2DM‐FETs with Schottky or Ohmic contacts with superior accuracy and efficiency over previous methods, especially when describing non‐monotonic drain conductance characteristics. A three‐bit threshold inverter quantizer (TIQ) circuit is fabricated using ambipolar black phosphorus and it is demonstrated that the model accurately predicts circuit performance. The model could be very effective and valuable in the development of 2DM‐FET‐based integrated circuits. [ABSTRACT FROM AUTHOR]

To improve the ecological environment quality of industrial cities and protect the health of residents, we determined the priority control factors of heavy metal(loid)s (HMs) pollution and risk in the resuspended street dust (RSD) of Shijiazhuang, an emblematic heavy-industrial city in North China, according to the probabilistic risk assessment method. The results showed that the HMs studied in Shijiazhuang RSD exhibited different pollution levels, that is, Hg showed moderate-to-severe pollution and above; Zn showed moderate-and-above pollution; Co, Cu and Pb showed non-pollution to moderate pollution; while As, Cr, Mn and Ni showed no pollution. The overall contamination of HMs in the RSD presented moderate-to-above contamination levels in >94% of samples. Mercury exhibited considerable-to-very-high ecological risk. The synthetic ecological risks of the HMs were considerable-to-above. The comprehensive pollution and synthetic ecological risk of HMs in Shijiazhuang RSD were mainly caused by Hg. The carcinogenic risk of HMs in RSD to local inhabitants and their non-carcinogenic risk to children should not be ignored. Coal-related industrial sources are a priority source to control. Hg and As are priority HMs to control. We suggest that local governments should strengthen the management of coal-related industrial sources and As and Hg emissions. [ABSTRACT FROM AUTHOR]

With the development of virtual reality and augmented reality, the pixel sizes of displays are reaching the sub-micrometer regime. One of the main challenges is the short-channel effect of the thin-film transistors (TFTs) in the driving circuits. In this work, we report the short-channel effects of indium-gallium-zinc-oxide source–gated transistor (IGZO SGT). The simulation results show that when reducing the channel length down to 500 nm, the output impedance of the IGZO SGT is still high up to 4.13 $\times \,\,10^{{8}}\,\, \Omega \!\cdot \!\mu \text{m}$ at gate–source voltage (${V}_{\text {GS}}$) of 5 V and drain–source voltage (${V}_{\text {DS}}$) of 7 V, 437 times higher than that of a conventional IGZO TFT of the same dimension. It is found that the Schottky source contact in SGTs can effectively suppress the back-channel current as compared with TFTs. The threshold voltage of short-channel SGTs remains almost the same when applying different drain voltages in contrast to TFTs. When ${V}_{\text {DS}}$ changes from 5 to 7 V at ${V}_{\text {GS}} =5$ V, the drain current of the IGZO TFT increases 23.7%, while the drain current of the SGT only increases 0.8%. The experimental results of IGZO TFTs and SGTs with a channel length of 500 nm showed similar dependence on the drain voltage to the simulation results. Such insensitivity to short-channel effects makes SGTs a promising candidate as current driving transistors in high-pixel-density display circuits. [ABSTRACT FROM AUTHOR]

Bilateral basal ganglia hemorrhages are extremely rare and have very poor prognosis. We describe the case of a 52-year-old woman with a history of hypertension who experienced bilateral basal ganglia hemorrhages. We performed bilateral hematoma aspiration by minimally invasive surgery via frontal and temporal puncture points. We discuss the surgical procedure and review relevant literature pertaining to the underlying causes and complications of similar cases. [ABSTRACT FROM AUTHOR]

The typical helical flow within the human arterial system is widely used when designing cardiovascular devices, as this helical flow can be generated using the “crossed limbs” strategy of the bifurcated stent graft (BSG) and enhanced by the tapered structure of arteries. Here, we propose the use of a deflected blended bifurcated stent graft (BBSG) with various tapers, using conventional blended BSGs with the same degree of taper as a comparison. Hemodynamic performances, including helical strength and wall shear stress- (WSS-) based indicators, were assessed. Displacement forces that may induce stent-graft migration were assessed using numerical simulations and in vitro experiments. The results showed that as the taper increased, the displacement force, helicity strength, and time-averaged wall shear stress (TAWSS) within the iliac grafts increased, whereas the oscillating shear index (OSI) and relative residence time (RRT) gradually decreased for both types of BBSGs. With identical tapers, deflected BBSGs, compared to conventional BBSGs, exhibited a wider helical structure and lower RRT on the iliac graft and lower displacement force; however, there were no differences in hemodynamic indicators. In summary, the presence of tapering facilitated helical flow and produced better hemodynamic performance but posed a higher risk of graft migration. Conventional and deflected BBSGs with taper might be the two optimal configurations for endovascular aneurysm repair, given the helical flow. The deflected BBSG provides a better configuration, compared to the conventional BBSG, when considering the reduction of migration risk. [ABSTRACT FROM AUTHOR]

Local hemodynamic environment is a determinant factor in drug delivery from a drug eluting stent (DES) to the target arterial tissue. By using a simplified model of a DES, we demonstrated that if a DES had a drug release mode of uniform rate the drug released from the stent will distribute non-uniformly along the stent due to the flowing blood, with a significantly higher drug concentration at the distal part of the stent than that at the proximal one. This may explain why a DES could retard neointimal formation and vascular remodeling in downstream coronary segments. To solve this problem, we thereafter optimized the drug release mode of the DES as an exponential function. The simulation results showed that the optimized drug release mode could lead to a fairly uniform drug concentration distribution along the stent. Therefore, the present study suggested that to achieve a more effective result, optimization of drug eluting strategy (drug release mode) for the DES would be essential. [ABSTRACT FROM AUTHOR]

Despite the crucial role of nitric oxide (NO) in the homeostasis of the vasculature, little quantitative information exists concerning NO transport and distribution in medium and large-sized arteries where atherosclerosis and aneurysm occur and hemodynamics is complex. We hypothesized that local hemodynamics in arteries may govern NO transport and affect the distribution of NO in the arteries, hence playing an important role in the localization of vascular diseases. To substantiate this hypothesis, we presented a lumen/wall model of the human aorta based on its MRI images to simulate the production, transport and consumption of NO in the arterial lumen and within the aortic wall. The results demonstrated that the distribution of NO in the aorta was quite uneven with remarkably reduced NO bioavailability in regions of disturbed flow, and local hemodynamics could affect NO distribution mainly via flow dependent NO production rate of endothelium. In addition, erythrocytes in the blood could moderately modulate NO concentration in the aorta, especially at the endothelial surface. However, the reaction of NO within the wall could only slightly affect NO concentration on the luminal surface, but strongly reduce NO concentration within the aortic wall. A strong positive correlation was revealed between wall shear stress and NO concentration, which was affected by local hemodynamics and NO reaction rate. In conclusion, the distribution of NO in the aorta may be determined by local hemodynamics and modulated differently by NO scavengers in the lumen and within the wall. [ABSTRACT FROM AUTHOR]

To elucidate the difference between Newtonian and shear thinning non-Newtonian assumptions of blood in the analysis of DES drug delivery, we numerically simulated the local flow pattern and the concentration distribution of the drug at the lumen-tissue interface for a structurally simplified DES deployed in a curved segment of an artery under pulsatile blood flow conditions. The numerical results showed that when compared with the Newtonian model, the Carreau (shear thinning) model could lead to some differences in the luminal surface drug concentration in certain areas along the outer wall of the curved vessel. In most areas of the vessel, however, there were no significant differences between the 2 models. Particularly, no significant difference between the two models was found in terms of the area-averaged luminal surface drug concentration. Therefore, we believe that the shear thinning property of blood may play little roles in DES drug delivery. Nevertheless, before we draw the conclusion that Newtonian assumption of blood can be used to replace its non-Newtonian one for the numerical simulation of drug transport in the DES implanted coronary artery, other more complex mechanical properties of blood such as its thixotropic behavior should be tested. [ABSTRACT FROM AUTHOR]

Background: Abdominal aortic aneurysm (AAA) is a kind of dangerous aortic vascular disease, which is characterized by abdominal aorta partial enlargement. At present, endovascular aneurysm repair (EVAR) is one of the main treatments of abdominal aortic aneurysm. However for some patients after EVAR the aneurysm re-expanded and even ruptured, leading to poor postoperative effect. The stent-graft endoleak after EVAR was realized to influence the AAA in-sac pressure and contribute to the aneurysm re-enlargement.Methods: In order to analyze the influence of endoleaks positions on the pressure shielding ability of stent-graft after EVAR, type I and type III endoleak models were reconstructed based on computed tomography (CT) scan images, and the hemodynamic environment in AAA was numerically simulated.Results: When the endoleak was at the proximal position the pressure shielding ability will be obviously weakened. While, the pressure shielding ability was higher in the systole phase than that in diastole phase when the endoleak located at the middle or distal positions. Unfortunately, when the endoleak located at the proximal position, the pressure shielding ability would be relatively weak in the whole cardiac cycle.Conclusions: The results revealed that the influence of endoleaks on pressure shielding ability of stent-graft was both location and time specific. [ABSTRACT FROM AUTHOR]

Logic-in-memory (LIM) architecture holds great potential to break the von Neumann bottleneck. Despite the extensive research on novel devices, challenges persist in developing suitable engineering building blocks for such designs. Herein, we propose a reconfigurable strategy for efficient implementation of Boolean logics based on a hafnium oxide-based ferroelectric field effect transistor (HfO 2 -based FeFET). The logic results are stored within the device itself (in situ) during the computation process, featuring the key characteristics of LIM. The fast switching speed and low power consumption of a HfO 2 -based FeFET enable the execution of Boolean logics with an ultralow energy of lower than 8 attojoule (aJ). This represents a significant milestone in achieving aJ-level computing energy consumption. Furthermore, the system demonstrates exceptional reliability with computing endurance exceeding 10 8 cycles and retention properties exceeding 1000 s. These results highlight the remarkable potential of a FeFET for the realization of high performance beyond the von Neumann LIM computing architectures.

Purpose: As the factors affecting the efficacy of the bare-metal stent in the treatment of aneurysm with a visceral vessel attached were not fully understood, we aimed to discuss the effects of different characteristics of the stent on the hemodynamics and flexibility in the treatment of the aneurysm., Methods: Single-layer (with different strut widths) and multi-layer (with a different number of struts) stent models divided into three porosity groups, with porosities of 72.3, 60.5, and 52.4%, were modeled for a comparison of their hemodynamic isolation and flexibility performance via computational fluid dynamics and finite element methods., Results: The velocity and timeaveraged wall shear stress decreased more noticeably with multi-layer stent interventions. A higher oscillatory shear index and relative residence time occurred at the aneurysmal sac wall after multi-layer stents were employed. Time-averaged wall shear stress on the aneurysmal wall decreased with an increase in the number of struts or a decrease in pore size, but oscillatory shear index and relative residence time increased as the number of struts increased or the pore size decreased. Besides, all stents affect the branch patency slightly. In the bending test, when the porosity exceeded 60.5%, multi-layer stents were more flexible., Conclusion: The number of struts or pore size of stent dominated the isolation in the management of the aneurysm and affected the flexibility significantly when the porosity was below 60.5%. These findings may contribute to the special design of the stent in the treatment of such types of aneurysms.

Muscle atrophy of the residual limb after lower-limb amputation is a disadvantage of amputees' rehabilitation. To investigate the biomechanics mechanism of muscle atrophy of the residual limb, we built a finite element model of a residual limb including muscle, skeletons and main vessels based on magnetic resonance images of a trans-femoral amputee, and studied the biomechanics effects of the socket of the lower-limb prosthesis on the soft tissue and vessels in the residual limb. It was found that the descending branch of the lateral femoral circumflex artery suffered the most serious constriction due to the extrusion, while that of the deep femoral artery was comparatively light. Besides, the degree of the constriction of the descending branch of the lateral femoral circumflex vein, femoral vein and deep femoral vein decreased in turn, and that of the great saphenous vein was serious. The stress-strain in the anterior femoral muscle group were highest, while the stress concentration of the inferior muscle group was observed at the end of the thighbone, and other biomechanical indicators at the inferior region were also high. This study validated that the extrusion of the socket on the vessels could cause muscle atrophy to some degree, and provided theoretical references for learning the mechanism of muscle atrophy in residual limb and its effective preventive measures.

The phenomenon of sex differences exists in patients who have abdominal aortic aneurysms (AAA). The occurrence rate of AAA is higher in male, while the rates of rupture and postoperative mortality are higher for female. This phenomenon of sex differences would affect the diagnosis, treatment and postoperative rehabilitation for AAA patients. This article reviewed the recent research status of sex differences on AAA, and explored the phenomenon of sex differences from the aspects of threshold determination, biomechanics and mechanobiology. This review points out that the sex differences on AAA could ascribe to the differences of biomechanical environment and biological properties induced by the vascular size, anatomy structure and structure components of abdominal aortic artery. The comprehensive investigations of the sex differences on AAA could help to optimize the diagnosis, treatment and device design, patient care and rehabilitation strategy of AAA based on sex differences phenomenon.

The glycocalyx is a key mechanosensor on the surfaces of vascular cells (endothelial cells and smooth muscle cells), and recently, we reported that the redistribution of the hemodynamic factors in tail-suspended (TS) hindlimb-unloaded rats induces the dimensional adaptation of the endothelial glycocalyx in a regional-dependent manner. In the present study, we investigated the coverage and gene expression of the glycocalyx and its possible relationship with smooth muscle contractility in the conduit arteries from the TS rats. The coverage of the glycocalyx, determined by the area analysis of the fluorescein isothiocyanate-labeled wheat germ agglutinin (WGA-FITC) staining to the cryosections of rat vessels, showed a 27.2% increase in the common carotid artery, a 13.3 and 8.0% decrease in the corresponding abdominal aorta and the femoral artery after 3 wk of tail suspension. The relative mRNA levels of syndecan-2, 3, 4, glypican-1, smooth muscle protein 22 (SM22), smoothelin (SMTN), and calponin were enhanced to 1.40, 1.53, 1.70, 1.90, 2.93, 2.30, and 5.23-fold, respectively, in the common carotid artery of the TS rat. However, both glycocalyx-related genes and smooth muscle contractile apparatus were totally or partially downregulated in the abdominal aorta and femoral artery of the TS rat. A linear positive correlation between the normalized coverage of glycocalyx and normalized mRNA levels of SM22, SMTN, and calponin exists. These results suggest the regional-dependent adaptation of the glycocalyx in simulated microgravity condition, which may affect its mechanotransduction of shear stress to regulate the contractility of the smooth muscle, finally contributing to postspaceflight orthostatic intolerance., (Copyright © 2016 the American Physiological Society.)

Objective: To test the hypothesis that the venous graft when implanted in an arterial bypass might endure a significantly elevated water filtration rate, leading to fast infiltration/accumulation of low-density lipoproteins (LDLs) within the graft wall and hence the accelerated atherogenesis., Methods: We measured filtration rates of the swine femoral artery and lateral saphenous vein under venous and arterial hemodynamic conditions in vitro. Based on the measured filtration rates, we numerically simulated LDL transport in an arterial bypass model with a venous graft. Moreover, in order to validate the theoretical prediction, we measured DiI-LDLs uptake by both arteries and veins under arterial condition., Results: The experimental results showed that when subjected to arterial hemodynamic condition, the filtration rate of the venous wall was increased sharply, and significantly higher than that of the artery. Moreover, different from the hydraulic conductivity of artery, the venous one would increase with increasing pressure. The numerical results showed that for the venous graft, both luminal surface LDL concentration and LDL accumulation within the vessel wall were significantly higher than those for the host artery. In addition, the experiment, which was used to confirm theoretical prediction, showed that the amount of DiI-LDLs uptake by the venous wall was much higher compared with arterial wall., Conclusion: The present study suggests that the accelerated atherogenesis of the venous graft is attributable to its elevated filtration rate that may lead to both aggravated concentration polarization of LDLs and enhanced convective transport of LDLs into the graft wall., (Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.)