Search

The demand for eco-friendly packaging materials has urged researchers to look for alternatives to petroleum-based polymers. In this regard, paper-based products have turned out to be a promising choice; however, their weak resistance to water has limited their application. The use of various additives to enhance paper's moisture resistance is a common practice. However, considering the growing global agenda for sustainable development, the search for new bio-based paper additives has become increasingly important. This study investigated the potential synergistic impact of the addition of nanofibrillated cellulose (NFC) and chitosan additives (CHIT) to different fiber combinations to improve paper's properties, in particular, their wet strength. The efficacy of the additive application order was examined and was found to be crucial in achieving the desired outcomes. The results showed that incorporating CHIT after NFC enhanced the paper's tensile and burst indicators, as well as the paper stretch in the dry state, by 35–70%, 35–55%, and 20–35%, respectively. In addition, the tensile index and stretch in the wet state improved 9–13 times and 2.5–5.5 times over, respectively. The air permeability decreased 2.5–12 times over. These findings demonstrate that the sequential addition of the NFC and CHIT additives yield a greater enhancement of paper's properties than using each additive separately. [ABSTRACT FROM AUTHOR]

A significant increase in the consumption of recycled fiber products has been observed worldwide, and the industry is forced to solve the challenges of recycled fiber quality and add strength agents and/or virgin fibers to reach sufficient properties. In order to investigate whether the mechanical and air permeability properties of waste fiber (WF) material can be significantly improved by adding wood kraft fibers (KF), hemp soda fibers (HF), and ammonium persulfate oxidated cellulose nanofibrils (CNF), different fiber blends were prepared and tested. Results revealed the excellence of hemp fibers over wood fibers regarding the improvement of WF products. The results of WF after the addition of 10% mixed fibers (KF + HF) were higher than the results of a 50% KF addition. The impact of CNF depended on fiber composition and properties. A formula for modeling the CNF impact on different fiber compositions was proposed. Obtained fiber material samples showed suitability for home composting, thus contributing to the goals of the European Green Deal regarding reducing landfill waste and the development of cleaner products. [ABSTRACT FROM AUTHOR]

This study investigates the mycelial biomass production and chitosan extraction potential of various Basidiomycota strains, including Heterobasidion annosum, Phanerochaete chrysosporium, Pleurotus ostreatus, Trametes versicolor, and Lentinus lepideus. Both submerged fermentation (SF) and solid-state fermentation (SSF) methods were employed. The chitosan yield in basidiocarps of Pleurotus ostreatus, Agaricus bisporus, and Ganoderma applanatum was also evaluated as a reference material. The chitosan extracted from fungal cells was characterized using elemental analyses and FTIR spectroscopy. Among the cultivated strains, P. chrysosporium exhibited the highest mycelial biomass concentration in SF (1.03 g 100 mL–1) after 14 days, while T. versicolor achieved the highest biomass concentration in SSF (3.65 g 100 mL–1). The highest chitosan yield was obtained from the mycelium of P. chrysosporium (0.38%) and T. versicolor (0.37%) in shaken SF. Additionally, commercially cultivated A. bisporus demonstrated the highest chitosan yield in fungal fruiting bodies (1.7%). The extracted chitosan holds potential as a functional biopolymer additive for eco-friendly materials, serving as an alternative to synthetic wet and dry strength agents in packaging materials. [ABSTRACT FROM AUTHOR]

Polycarboxylic acids (PCAs) aroused interest as crosslinking agents for natural polymers, such as cellulose, starch, chitosan, and hemicelluloses (HC), for improving their water resistance and imparting them new properties. Here, PCAs were studied for the crosslinking of HC films. HCs were isolated from gray alder (Alnus incana L.) wood as a water-soluble fraction by sawdust extraction with 7% potassium hydroxide. Citric acid (CA), maleic acid (MA), and butane tetracarboxylic acid (BTCA) served as crosslinking agents in the presence of sodium hypophosphite as a catalyst. The crosslinking reaction was followed by the analysis of free and esterified COOH groups in HC films. At temperatures below 100-110°C, the HC esterification process with BTCA proceeded very slowly. At 140°C, most of the acids' COOH groups reacted with HC during 1-1.5 h. BTCA had a higher esterification activity than CA and MA. The obtained films retained their form on immersing in water and subsequent drying in the open air. The water retention value of films followed the reaction kinetics, that is, decreased with increasing reaction time. Water-resistant films were obtained with no <10-11% of BTCA and 20% of CA based on the weight of HC. The water vapor sorption capacity of the films after modification with 10% BTCA decreased approximately twice in the whole range of the relative humidity of air compared with the case of unmodified HC films. [ABSTRACT FROM AUTHOR]