Search

Production of diamond coatings on titanium substrates has demonstrated as a promising strategy for applications ranging from biosensing to hard tissue engineering. The present study focuses on monitoring the nucleation and growth of bone-like carbonated-hydroxyapatite (C-HA) on polycrystalline diamond (PCD) synthetized on titanium substrate by means of a hot filament chemical vapor deposition (HF-CVD) method. The surface terminations of diamond coatings were selectively modified by oxidative treatments. The process of the C-HA deposition, accomplished by precipitation from simulated body fluid (SBF), was monitored from 3 to 20 days by Raman spectroscopy analysis. The coupling of morphological and structural investigations suggests that the modulation of the PCD surface chemistry enhances the bioactivity of the produced materials, allowing for the formation of continuous C-HA coatings with needle-like texture and chemical composition typical of those of the bone mineral. Specifically, after 20 days of immersion in SBF the calculated carbonate weight percent and the Ca/P ratio are 5.5% and 2.1, respectively. Based on these results, this study brings a novelty in tailoring the CVD-diamond properties for advanced biomedical and technological applications. [ABSTRACT FROM AUTHOR]

Production of diamond coatings on titanium substrates has demonstrated as a promising strategy for applications ranging from biosensing to hard tissue engineering. The present study focuses on monitoring the nucleation and growth of bone-like carbonated-hydroxyapatite (C-HA) on polycrystalline diamond (PCD) synthetized on titanium substrate by means of a hot filament chemical vapor deposition (HF-CVD) method. The surface terminations of diamond coatings were selectively modified by oxidative treatments. The process of the C-HA deposition, accomplished by precipitation from simulated body fluid (SBF), was monitored from 3 to 20 days by Raman spectroscopy analysis. The coupling of morphological and structural investigations suggests that the modulation of the PCD surface chemistry enhances the bioactivity of the produced materials, allowing for the formation of continuous C-HA coatings with needle-like texture and chemical composition typical of those of the bone mineral. Specifically, after 20 days of immersion in SBF the calculated carbonate weight percent and the Ca/P ratio are 5.5% and 2.1, respectively. Based on these results, this study brings a novelty in tailoring the CVD-diamond properties for advanced biomedical and technological applications.

Bone-substitute materials are essential in dental implantology. We prepared collagen (Col)/hydroxyapatite (Hap)/acidic gelatin (AG)/basic fibroblast growth factor (b-FGF) constructs with enhanced bone-forming capability. The Col/Hap apatite composites were prepared by immersing Col sponges alternately in calcium and phosphate ion solutions five times, for 20 and 60 min, respectively. Then, the sponges were heated to 56 °C for 48 h. Scanning electron microscopy/energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction analyses showed that the Col/Hap composites contained poorly crystalline Hap precipitates on the Col matrix. Col/Hap composite granules were infiltrated by AG, freeze-dried, and immersed in b-FGF solution. The wet quaternary constructs were implanted in rat cranial bone defects for 8 weeks, followed by soft X-ray measurements and histological analysis. Animal studies have shown that the constructs moderately increase bone formation in cranial bone defects. We found that an alternate immersion time of 20 min led to the greatest bone formation (p < 0.05). Constructs placed inside defects slightly extend the preexisting bone from the defect edges and lead to the formation of small island-like bones inside the defect, followed by disappearance of the constructs. The combined use of Col, Hap, AG, and b-FGF might bring about novel bone-forming biomaterials. [ABSTRACT FROM AUTHOR]

Introduction: This study create a dental composite by hybirding polyhedral oligo-sesquioxide nano monomers and bioactive glass BG 45S5., Methods: Make an experimental composite resin material with a 60 % filler content overall by substituting 20 % of the filler with BG 45S5. The experimental resins are grouped and named P0, P2, P4, P6 and P8 based on the reactive nanomonomer methacrylic acid-based multifaceted oligomeric sesquisiloxane (POSS) added by 2 %-8 % in the resin matrix portion of each group. Utilize a universal testing machine to analyze and compare the mechanical properties of these, then perform Fourier infrared spectrum analysis, double bond conversion analysis, and scanning electron microscope analysis. Based on this, after soaking the experimental materials artificial saliva solution or lactic acid solution for a while, the pH changes of the solution, the release of Ca 2+ and PO 4 3- ions, and the precipitation of apatite on the resin material's surface were tested and analyzed. Cell viability tests were used to assess sample cell viability and quantify the cytotoxicity of biological cells. The independent sample t-test was used to examine the group comparisons, and a difference was considered statistically significant at P<0.05., Results: Outstanding mechanical and the double bond conversion are demonstrated by the nanocomposites when the POSS concentration hits 4 wt%. Agglomeration will cause the performance to deteriorate if the concentration beyond this threshold. In the P4 group, the double bond conversion, CS, and FS rose by a large margin, respectively, in comparison to the blank control group P0. Thankfully, the data demonstrate that adding POSS increases adhesive ability when compared to the blank group P0, however, there is no discernible difference between the other experimental groups. The acid neutralization capacity of the P4 group is essentially the same as that of the control group (P0). Ca 2+ and PO 4 3- ions are released in significant amounts following treatment with lactic acid solution, although this tendency is clearly less pronounced in artificial saliva. SEM and EDX data indicate that when the experimental resin is soaked in lactic acid solution and artificial saliva, apatite precipitation will happen on its surface. The results of the cell viability test indicated that there was no statistically significant difference between the experimental groups, and the viability of the cells increased after 24hours and 48 hours., Conclusions: POSS was included into the composite resin along with 20% bioactive glass as a filler. When the proportion of POSS is less than 4%, the indices of composite resin materials rise in a dose-dependent way. When this value is surpassed, performance begins to deteriorate. The inclusion of POSS has no influence on the biological activity of the composites, which means that the hybrid composite resin is capable of acid neutralization, ion release, and apatite precipitation., Clinical Significance: The experimental composite resin can be used as an intelligent material in clinical treatment. It has the clinical application potential of preventing demineralization of tooth hard tissue, promoting remineralization, and improving edge sealing through apatite precipitation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Novel chitosan scaffolds containing different weight ratios of electrospun hydroxyapatite nanofibers (n‐HAs) were fabricated. The fibers possessed diameters in the range 110–170 nm. A fixed concentration of glycidyloxypropyl‐trimethoxysilane (GPTMS) as a crosslinking agent was added to the chitosan solution (CG). The porosity percentage was increased when GPTMS and n‐HAs were added to the chitosan structure. The presence of GPTMS in the chitosan structure caused a decrease in the average pore size. The pores were more irregular in shape than pure chitosan and CG scaffolds when n‐HAs were added. A uniform distribution of n‐HAs was seen for a chitosan‐GPTMS hybrid scaffold containing 25 wt% n‐HAs (CGH25) using energy dispersive X‐ray spectroscopy and mapping. The best values of compressive strength and elastic modulus were achieved for CGH25. The swelling ratio was decreased on adding GPTMS to the chitosan scaffold. Different morphologies of hydroxyapatite deposits on the surface of CG and CGH25 (string‐like versus needle‐like precipitates) were observed after 14 days of soaking in simulated body fluid. For CGH25, the viability of MG‐63 osteoblastic cells improved with respect to CG for up to 72 h of cell culture. These results reveal the potential of the chitosan‐CGH25 scaffold for use in bone tissue engineering. © 2019 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

The study aim was to develop light-curable, high strength dental composites that would release calcium phosphate and chlorhexidine (CHX) but additionally promote surface hydroxyapatite/CHX co-precipitation in simulated body fluid (SBF). 80 wt.% urethane dimethacrylate based liquid was mixed with glass fillers containing 10 wt.% CHX and 0, 10, 20 or 40 wt.% reactive mono- and tricalcium phosphate (CaP). Surface hydroxyapatite layer thickness/coverage from SEM images, Ca/Si ratio from EDX and hydroxyapatite Raman peak intensities were all proportional to both time in SBF and CaP wt.% in the filler. Hydroxyapatite was, however, difficult to detect by XRD until 4 weeks. XRD peak width and SEM images suggested this was due to the very small size (~ 10 nm) of the hydroxyapatite crystallites. Precipitate mass at 12 weeks was 22 wt.% of the sample CaP total mass irrespective of CaP wt.% and up to 7 wt.% of the specimen. Early diffusion controlled CHX release, assessed by UV spectrometry, was proportional to CaP and twice as fast in water compared with SBF. After 1 week, CHX continued to diffuse into water but in SBF, became entrapped within the precipitating hydroxyapatite layer. At 12 weeks CHX formed 5 to 15% of the HA layer with 10 to 40 wt.% CaP respectively. Despite linear decline of strength and modulus in 4 weeks from 160 to 101 MPa and 4 to 2.4 GPa, respectively, upon raising CaP content, all values were still within the range expected for commercial composites. The high strength, hydroxyapatite precipitation and surface antibacterial accumulation should reduce tooth restoration failure due to fracture, aid demineralised dentine repair and prevent subsurface carious disease respectively. [ABSTRACT FROM AUTHOR]

Abstract: The fundamental mechanisms that govern bone mineralization have been fairly well evidenced by means of experimental research. However, rules for the evolution of the volume and composition of the bone tissue compartments (such as the mineralized collagen fibrils and the extrafibrillar space in between) have not been provided yet. As an original contribution to this open question, we here test whether mineralizing bone tissue can be represented as a thermodynamically closed system, where crystals precipitate from an ionic solution, while the masses of the fibrillar and extrafibrillar bone tissue compartments are preserved. When translating, based on various experimental and theoretical findings, this mass conservation proposition into diffraction–mass density relations, the latter are remarkably well confirmed by independent experimental data from various sources. Resulting shrinkage and composition rules are deemed beneficial for further progress in bone materials science and biomedical engineering. [Copyright &y& Elsevier]

Abstract: Hydrous ferric oxide (here termed ‘ochre’) sludge, an abundant waste product produced from the treatment of acid mine drainage (AMD), was used in this study for the removal of phosphorus (in the form of phosphate ions) from contaminated waters. The phosphorus uptake capacities of both raw and pelletized AMD solids were compared using batch and column tests. Addition of a cement binder to the AMD solids during pellet production led to significantly increased P-loading of the resultant solids compared to the raw sludge. Additionally, the pellets were found to continue to remove P in tests up to 7d in duration whereas the unbound AMD sludge appeared to approach equilibrium with phosphate solution after approximately 60min of contact time. In line with previous studies P uptake by the AMD solids was found to be primarily via adsorption. By contrast calcium phosphate precipitation was found to be the dominant removal mechanism for the cement-bound ochre pellets with a relatively small proportion of removal attributable to the AMD solids. SEM–EDX analysis of the surface of used pellets showed a Ca:P molar ratio close to that of hydroxyapatite (HAP). Continuous column tests on these pellets showed a rapid decrease in P removal capacity by the pellets over time, attributable to the formation of a passivating HAP surface layer. [Copyright &y& Elsevier]

Abstract: Modelling of the biologic materials, well-organized multifunctional structures and systems found in nature has attracted the interest of scientists working in many scientific disciplines. A new and rapidly growing field of biomimetics has stimulated an increased focus on biological materials as the researchers attempt to mimic the features, characteristics and growth of these naturally-occurring materials. This review discusses the principal features of biomineralization in relation to the controlled crystallization of inorganic materials and biomimetic routes to the formation of nanometer hydroxyapatite particles. This approach can be compared with biologic mineralization and has the potential for providing much greater control of particle size and distribution than would conventional methods. The constant-composition method has been used to study the influence of polyelectrolytes on the kinetics of crystal growth of hydroxyapatite (HAP), the thermodynamically most stable calcium phosphate phase, on HAP seed crystals at pH 7.4 and 37°C. The results indicate that polyelectrolyte concentration and the larger number of negatively charged functional groups markedly affect the growth rate. The fit of the Langmuir adsorption model to the experimental data supports a mechanism of inhibition through molecular adsorption of polymers on the surface of growing crystals. This system may allow insights into biomineralization processes. [Copyright &y& Elsevier]

This study introduced an experimental bioactive glass (BG) with a lower Na2O content than conventional BG 45S5 (10.5 wt% vs. 24.5 wt%), additionally containing CaF2 (12 wt%) and a network connectivity similar to that of BG 45S5. A series of experimental composites functionalized with 5–40 wt% of the novel BG was prepared and compared to a corresponding series of experimental composites functionalized with 5–40 wt% of BG 45S5. Commercial acid-neutralizing materials (alkasite, giomer, and glass ionomer) were used as references. The capabilities of the materials to neutralize hydrochloric acid (pH = 2.6) and lactic acid (pH = 4.5) were evaluated by real-time pH measurements over 1 h. The degree of conversion and precipitation of calcium phosphate were also investigated. Data were analyzed using one-way and Welch ANOVA at an overall level of significance of 0.05. The acid-neutralizing potential of the experimental BG incorporated into resin composites was generally comparable to that of BG 45S5, and better than that of a giomer and glass ionomer. Fluorine was identified in the precipitate that developed on the composites functionalized with the experimental BG, suggesting a capability of forming fluorapatite. Unlike the 45S5 composition, the experimental BG did not impair the degree of conversion of resin composites. The novel BG filler is therefore an interesting candidate for future investigations of caries-preventive resin composites, and their potential clinical applicability for restorative, preventive, and orthodontic purposes. [ABSTRACT FROM AUTHOR]